Currency formate on 27.02.2008

Hi,
Good day experts,
In my client i've format which is 1,234,567.89 in own data. But functional guys they've format which is 1.234.567,89 in own data.
When the functional guys are going to tesiting the currency feild in CAA2 t.code. the validation is not going right. like:
they are getting the extra zeros when they double click on the field. and they unable to enter the digits in last position of the field.
Can write any conversion of this or else anything.
Plz give me solution for this senario.
regards,
kk

Hello Ebttikar,
Please try clean boot then test how the issue goes. Following are the detailed steps about clean boot:
Log on to the computer by using an account that has administrator rights.
Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the System Configuration Utility.
On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
Click OK, Choose Don’t show this message again and then click Restart.
Please check if RDP session issue is still the same.
Please let me know the result.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Currency format in Spreadsheet tables uses period's instead of comma's

Xcelsius 2008 SP3. I have inserted a spreadsheet table into my model, the columns are formatted in a currency format with $ and the thousand's separator that is displaying in the table is a period instead of a comma. Has anybody else seen this problem?

Hi,
yes, I`ve had the same behavior. As a workaround, you have to change the format of the cells.
Go into the properties of the cells:
-> Right mouse click
-> format cells
-> category
-> number
-> change something, e.g. the number of decimal places to show
Then you will have to map the component again to the same cells under "Display Data".
And now, the currency information will be shown correctly.
Regards
Victor

Currency formats

Hi,
I have currency saved as character string.
Example . In user settings- currency format is space. So it should be displayed to user as 1.234.567,89. If currency format is 'X' it should be displayed to user as 1,234,567.89 or if currency format is Y, it should be displayed to user as
1 234 567,89.
Now i am getting currency values as a chatracter string always. i.e for example, i am always getting it in format
1111111111.00.
Now when i display this amount to user, it should be displayed as per format in user settings. How to do this.
<REMOVED BY MODERATOR>
Regards
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 3:45 PM

instead of write .. use move .. and
lf_val = '200.05' <-- should be in this format .. if there is any comma , it
will dump ...
move lf_val to lf_curr.
Write your coding as :
data: lf_val type string,
lf_curr type p decimals 2,
lf_str(20).
lf_val = '2000000.05'.
move lf_val to lf_curr.
write lf_curr to lf_str.
write :/ lf_str.
Edited by: Srinivas Gurram Reddy on Mar 10, 2008 8:40 PM

In Scripts how to print the values in currence format

Dear abap guru's,
I am working on Purchase Order Script, copy from the standard script, after that wrote a one perform , in that added one new field to script, but value is printed like this formate : 1000.00, but i want to print 1,000.00 like this currence format. let me know the any solution
thanks to all
raj.

Hi ,
When you are populating the value in perform instead of assigning the value (using = ) pass it using WRITE TO.
Like : WRITE lw_total TO output-value.
Declare lw_total as currency field.
Regards,
Rajitha.

Invalid export DLL or export format" with Crystal Reports 2008 to Excel xls

We are experiencing the same issue as reported in the sticky thread. I answered in that thread, but thought that I woudl open a new thread to keep track of this issue. I can give you the responses to your questions you have requested in that thread:
Server Operating System - MS Windows Server 2003 R2 Enterprise Edition SP2
Version of the .NET Framework - MS .NET Framework 3.5 SP1
How did you deploy? - Installed CR 2008 SP1 runtime with msi package
If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size? CRRuntime_12_1_mlb.msi dated Sept. 16, 2008 12:55:00 PM, size: 56,717,824 bytes
What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory - File was created 9/13/08 11:21AM, 9451KB File Version: 12.1.0.882
How many libpng10.dll files are on your system? List all instances. - 1 instance is on the system located in C;\Program Files\Business Objects\Business Objects Enterprise 12.0\win32_x86 directory. It is dated 9/13/08 8:52:26AM 132KB version 1.0.30.1
Any additional comments - We have tried to export to PDF and this works successfully. However, we can not export to xls or rft formats.
CRXF_XLS.dll is 905KB 9/13/08 9:38AM Version 12.1.0.882
CRXF_RTF.dll is 509KB 9/13/08 9:35AM Version 12.1.0.882
We also have the CR XIR2 server runtime installed side by side on the server as we migrate from CR 2008 to CR XIR2 SP4 ( where this function does work currently).
Please let me know if you need anything additional.
Phil
"Invalid export DLL or export format" with Crystal Reports 2008
Posted: Sep 27, 2008 12:36 AM       E-mail this message      Reply
I've included this sticky because we are seeing many posts in this forum regarding the error Invalid export DLL or export format when exporting to Excel and RTF in .NET applications using the Crystal Reports 2008 .NET SDK.
Issue
Exporting a Crystal Report to Excel or RTF format
.NET application using the Crystal Reports 2008 runtime (version 12.0)
error Invalid export DLL or export format
We've been doing some testing in-house and haven't reproduced this behavior. In order to figure this issue out we will need your help. If you are getting this error please reply to this post with the following information:
Server Operating System
Version of the .NET Framework
How did you deploy?
If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size?
What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory
How many libpng10.dll files are on your system? List all instances.
Any additional comments
What We Know
The error invalid export DLL or export format may occur when exporting to Excel and RTF formats in .NET applications utilizing the Crystal Reports 2008 runtime (v 12.0)
Other export formats like Adobe PDF, Crystal Reports, CSV all export with no error
Some customers have resolved this by adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to their environment path variables
This may have something to do with the file libpng10.dll. Both crxf_xls.dll and crxf_rtf.dll are dependent on it.
Thanks in advance for your co-operation. We hope to figure out what is causing this issue soon.

Hi,
I am also having the same problem, except that I am not using Crystal Report 2008 runtime but the actual Crystal Report 2008 installation on Windows XP SP2 with VS Studio 2005 (VC++). MS .NET Framework 2.0.
Cyrstal Report XIR2 was installed on the same machine but uninstalled before installing Crystal Report 2008.
So only one instance of libpng10.dll and found in C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
Crpe32.dll        3/1/2008 version 12.0.0.683
Crxf_xls.dll       3/1/2008 version 12.0.0.683
Crxf_rtf.dll         3/1/2008 version 12.0.0.683
crdb_oracle.dll 3/1/2008 version 12.0.0.683
libpng10.dll       3/1/2008 version 1.0.30.0             122880 bytes
There is no problem for exporting to pdf, html, word, csv, Crystal Report. If I create a testing report without any data from database, the testing report can then be exported also to rtf and xls.
Oracle 11.1.0.6 is the DB for the reports.
Adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to the path did not resolve my problem.
Any idea to fix this issue?
Thanks
Kin H Chan

Currency format in LAC

Hi,
We are working with LAC, and we have an issue.
When we create an auction in SRM the currency format for the start price and the others is 1,234,567.89 (this is correct for us), but when we execute the applet (LAC) the format change 1.234.567,89
The user in SRM has the correct format 1,234,567.89 then, Why in the applet the format is different????
How can we change the format????
We are working with EP then, we execute the transaction bbp_auction since a Portal iview. Our single sign On between LAC and Portal was configurated, then we guess, we need to change the currency or number format in the Portal User, Is that correct?????
What user do we need to change (currency format)???? SRM user???? Portal user???? LAC user????
Thanks

Hi Claudia,
Check the following note :
Note 666849 - Running LAC in non-US locales
This may help you.
Thanks,
Pradeep.

How to convert Date in varchar(50) format MM/DD/YYYY HH:MM into YYYY-MM-DD format using MS SQLServer 2008 R2 ?

Hi,
I am getting the error "The conversion of a varchar data type to a datetime data type resulted in an out-of-range value."
when converting date in format Date in varchar(50) format MM/DD/YYYY HH:MM into YYYY-MM-DD format using MS SQLServer 2008 R2.
Please note that the date in column is Date(varchar(50), null).
I used the following syntax:
SELECT CONVERT(VARCHAR(10), Date, 102) AS Day
FROM dbo.[RCap_2G MM/Operator]
WHERE (CONVERT(VARCHAR(10), Date, 102) > { fn NOW() } - 1)

As noted above, either use ISDATE or TRY_CONVERT with the correct conversion style number:
-- SQL Server 2012 code
DECLARE @Date varchar(50) = '10/23/2006 10:20';
SELECT TRY_CONVERT(DATE, @Date, 101) AS Day
-- 2006-10-23
Datetime conversion blog:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Help needed to display character vaiable in currency format

Hi Friends
In a SAP Script I am passing a currency field to the subroutine as an i/p parameter and since it gets converted to character format in subroutine because of 'itcsy' , ihave deleted the trailing zeroes and decimal points from the field and performed calculations on the field, now i need to pass this char field back to SAP script but i need to display that field in currency format with commas and decimal points in the script...how do i do that???
Thanks
Vishal.

Hi Vishal,
When you pass the currency amount into the perform, no need to remove the trailing zeros and the decimal point.
Only thing you need to remove is the comma seperator as it gives a runtime error during calculation.
To convert it back to the format with comma, write the below command:
WRITE v_Item_total currency '2' to v_item_char.
CONDENSE v_item_char.
Here v_item_total is a number which is converted to comma seperated number and passed to char variable.
This char variable is then passed to the SCRIPT.
regards,
Gaurav.

How to use currency format set

Hi All,
I have to use currency format set to mask the amount values to their respective currencies ,
i reviewed the Oracle XML Publisher Administration and Developer's Guide and followed all the steps mentioned there ,i m also quoting the same over here
To define a Currency Format Set:
1. Navigate to the Currencies page under the Administration tab. Select Create
Currency Format Set.
2. Enter a Name and a Code for the set. The Code is a unique identifier and cannot be
changed later. Select Apply.
3. The Currency Formats page will display for your newly created set.
To add currency formats to the Currency Format Set:
1. Select Add Currency Format to add a format to your set.
2. Select a Currency Name from the list.
Note: This list is generated from the FND currency table and
should include all ISO currencies. Additional currencies can be
added from the System Administrator responsibility.
3. Enter the Format Mask you wish to use for this currency and select Apply.
The Format Mask must be in the Oracle number format. The Oracle number format
uses the components "9", "0", "D", and "G" to compose the format, for example:
9G999D00 where
9 represents a displayed number only if present in data
G represents the group separator
D represents the decimal separator
0 represents an explicitly displayed number regardless of incoming data
See Using the Oracle Format Mask, Oracle XML Publisher Report Designer's Guide for
more information about these format mask components.
After a currency format has been created, you can update or delete it from the Currency
Formats page.
i followed all the above step ,i need to use germany currency ,i have also used the format-currency command in my RTF template,but still its not working ,i used 9G999D00 for masking .
Any hint would be very helpful ,thanks in advance .Please let me know if my question is not clear
Thanks
Pratap

hi all
Thanks ,this is resolved ,i just missed clearing cache ,after clearing the cache its working .
thanks
Pratap

Currency format combined with if else issue

Hi all,
Basically, I need to get the value from if else statement, then use currency format to format the currency according to their currency code.
the following is my if else statement to show the A.PAY_PROMISE_AMT or A.PROMISE_AMT
<?xdofx:if A.PAY_PROMISE_AMT <> 0 then
A.PAY_PROMISE_AMT
else
A.PROMISE_AMT
end if?>
<?format-currency:value_*[this value I want to use is the value from the above if else statement];*currencycode; ‘false’?>
could anyone help me to combine those two statement to get the result I want?
Thanks in advance

>
I tried your solution, but I got some error.
>
some?
try change
<>to
!=in my sample
what if you try IF without xdofx?
what will be result?
say
<?if:A.PAY_PROMISE_AMT!=0?> <?xdoxslt:set_variable($_XDOCTX, 'LVar', A.PAY_PROMISE_AMT)?> <?end if?>
<?if:A.PAY_PROMISE_AMT=0?> <?xdoxslt:set_variable($_XDOCTX, 'LVar', A.PROMISE_AMT)?> <?end if?>
<?format-currency: xdoxslt:get_variable($_XDOCTX, 'LVar');CURRENCY;'true'?>plz see
Working with xdofx:if and xdoxslt variable error

Why the currency format in numbers is very limited into few countries??? I think this is a must have in next update of numbers ..

I was doing a spread sheet for a business proposal to my colleague in Philippines, was very disappointed to know that the currency format in Numbers for Mac is very limited to few countries only...

As Badunit suggests, in Numbers 2.3 you can turn on the preference that shows the full currency list.
Put a value in a cell and then choose Philippine Peso. Save the document. Open the document in Numbers 3.0 (if that is what you are working with) and you will still have access to that currency.
You might go to Numbers > Provide Numbers Feedback to let Apple know you need the option to use more currencies in Numbers 3.
SG

Currency format problem while exporting as excel

Hi
I have to create a report for which the currency format should be $#,##0.00 and -$#,##0.00 for negative numbers.
In the text form field of rtf template, I have selected number format and removed the portion ;($#,##0.00) from $#,##0.00;($#,##0.00).When I view the report as HTML the numbers are showing in proper format.($#,##0.00 or -$#,##0.00).But when the report is exported as excel ,the negative number format changes to ($#,##0.00) in red color.
Can anyone tell me how avoid this problem?
Thanks in advance
Naveen

I think this is an Excel issue - you can right mouse click in Excel the column header and "Format Cells>Text"
You could also append a ' character to your numbers in BI Answers ie: '6035784010491980 which should give you the correct format in Excel.
eg. CONCAT( '''', CAST ( '6035784010491980 AS CHAR) )
There is also an MS Office plug in available for OBIEE this may give you further options.

BInput Data mismatch with currency format

i am working with fs10 transaction
I want to sum up the balance amount with respect to all
companycode and post SUM to the bseg table using Batch input.
i defined sum variable as below and coded.
data : sum like glt0-hsl01. (currency format)
After all SUM operation.
I have done like this to diplay SUM in report first(to check SUM output)
SUM = SUM * 100.
write : sum decimals 0.
>>>>Now in report output i get value '17,222-'
if u see in fs10 screen we are getting same value.
but when i try to post in Batch input.
i have done like this below.(before posting i have checked
for negative value )
if sum < 0.
sum = sum *100.
compute sum = abs( sum )
now...
perform open_group................
perform bdc_field using 'bseg-wrbtr' (currency format)
sum.
when i execute this BI i get error in Amount(Sum)value
display screen. (saying something differs in length )
how to match the field.
ambichan.

Hello,
Go to the Domain of the Field BSEG-WRBTR, which is WERT7. There you see the Output length as 16. So you decalre a local variable in BDC which is of CHAR16 in length to hold the value of WRBTR.
Hope this helps you.
Regds, Murugesh AS

Print PO Price in Currency Format.

Hi Everybody,
   I want Print PO Price in currency format in alv report how do i get all countries currency values.
   anybody tell me.
thanks,
s.muthu

Hi Muthu
We can do it using the fields in populating the field catalog. Explore the existing fields of the same.
Another way to handle is declare the amt field as char and write the amt to this field using option CURRENCY. The the problem with this method arrives when you want to do totals and stuff.
Below code can help you understand in writing a field to another with currency option.
data: l_curr(20) type c,
      l_amd type kbetr value '3333.23'.
write l_amd to l_curr currency 'USD'.
write:/ l_curr.
write l_amd to l_curr currency 'JPY'.
write:/ l_curr.
To know the currency of a country you can use table T005.
Kind Regards
Eswar

Need to update the FSG currency format at form 999,999,999,99.99(default) to 99,99,99,999.99 (Indian)

Hi All,
I need to change the currency format in App's GL FSG report. It's by default comes 999,999,999,999,99.999 form this i need to change into Indian currency format (99,99,99,99,999.99).
I tried to changed the format in column set but it doesn't changed.
I am working in Apps R12 on RHEL5.5 64bit OS.
Thanks in Advance.
Regards
Chander

I'm not sure I understand the question. Are you saying you want the bold part of your path (currently hard-coded) to be in a variable instead? That would look something like this:
$file_server = Read-Host "Enter the file server IP address"
$guid = '{231A178D-DC6C-4186-9575-9C64F07DA5B5}'
(Get-Content "C:\TEMP\GPO\source\5\$guid\gpreport.xml") |
ForEach-Object { $_ -replace "99.999.999.999", "$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\gpreport.xml"
(Get-Content "C:\TEMP\GPO\source\5\$guid\Backup.xml") |
ForEach-Object { $_ -replace "99.999.999.999", "$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\Backup.xml"
(Get-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Documents & Settings\fdeploy1.ini") |
ForEach-Object { $_ -replace "99.999.999.999", "$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Documents & Settings\fdeploy1.ini"
(Get-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Preferences\Drives\drives.xml") |
ForEach-Object { $_ -replace "\\99.999.999.999", "\\$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Preferences\Drives\drives.xml"
(Get-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Preferences\files\files.xml") |
ForEach-Object { $_ -replace "\\99.999.999.999", "\\$file_server" } |
Set-Content "C:\TEMP\GPO\source\5\$guid\DomainSysvol\GPO\User\Preferences\files\files.xml"

Currency formate on 27.02.2008

Similar Messages

Maybe you are looking for