Currency in Rows - problem with Input Ready Rows
Hi,
Im facing a problem when Im trying to transfer values to the planning buffer with Currency put in rows.
I cannot restrict on Currency because the users plans in Transactional Currency and it various across.
The new row which I have entered has Currency field in rows for which I entered USD and entered the amount as 100 and selected transfer values from context menu. The system displays error message that the entered values are incorrect and correct it before navigation.
As a workaround, if there is another Keyfigure lets say Quantity in the rows, then after entering some values against it as 1 or 10 and now transfer the value, the values gets transfered to the planning buffer and the Amount field now is 0.0$. Now I can make the quantity as 0 and enter the Amount and save the data.
How to transfer the values to the planning buffer along with Currency?
Regards
Syam
Yes, this is in excel. The error that i get is :
Diagnosis
You have specified plan values; at least one of these plan values is invalid.
System Response
The system provides a description of the invalid value(s). Navigation is not permitted until all plan values are valid.
Procedure:
Correct the plan values entered.
One thin that I have observed is, had i restricted currency to a single value in the filter and then enter a value for amunt in the new row, it was able to transfer values to the buffer.
Just wann to know is this the standard behaviour?
Rgds
Syam
Similar Messages
-
Problems with Input Ready Query
Hello All,
I'm facing problems with input ready query for BI IP.
I've created the input query on aggregation level and maintianed all the planning settings. It is not allowing me to edit, when i'm attaching in the web template.
I also attached a button copy function, and i'm able to execute it and save it, but it not allowing me to change manually.
I also enabled the 3rd option for keyfigures...data can be changed with planning functions and user input.
Please help me in this regard.
We have just started the development of BI-IP, please suggest me if there are any notes to be applied.
Regards
KumarHello Johannes,
Yes I've set to the finest granularity...even if it is Only one characteristic and one key figure without any restrictions...
I've checked even planning tab page under properties...it is also fine..
But still it is not allaowing me to go to edit mode...this is a fresh instalation and the query i'm working is the first one...
Please suggest me if there are any notes to be applied, we are on Support Pack 10.
Regards
Jeevan Kumar -
Problem with input ready query with structure in Rows
Hi,
First I have created an input ready query without a structure where I have GL accounts in rows and key figures in column. It works and I can see that the cells are ready for input when I launch it in web through query designer.
Later, I am replacing the GL accounts in rows with a structure. Each line in the structure is combination of GL acctUoMChart of Acct (all restrcited to single values). Here comes the issue. When I run the query again (launching thru query designer) it dumps. Any idea?
Also, please let me know whether the planning applications can be made using BEX analyser OR WAD ?
Thanks a lot in advance.
Regards,
SSC
Edited by: sapsem con on Feb 19, 2009 2:38 PMHi,
Can you check ST22 for the dump analysis.
Also, planning applications can be built using BEx analyzer or WAD.
Check this link for example and step-by-step procedure to do the same.
http://help.sap.com/saphelp_nw70/helpdata/en/43/a18462c8291d9be10000000a1553f7/frameset.htm
Regards,
Deepti -
Problem with input data format - not "only" XML
Hi Experts,
I have problem with input data format.
I get some data from JMS ( MQSeries) , but input format is not clear XML.
This is some like flat file with content of XMLu2026.
Example:
0000084202008-11-0511:37<?xml version="1.0" encoding="UTF-8"?>
<Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
...content....
</Document>000016750
Problems in this file is :
1. data before parser <? xml version="1.0"> -> 0000084202008-11-0511:37
2. data after last parser </Document> -> 000016750
This data destroy XML format.
Unfortunately XI is not one receiver of this files and we canu2019t change this file format in queue MQSeries ( before go to XI) .
My goal is to get XML from this file:
<?xml version="1.0" encoding="UTF-8"?>
<Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
...content....
</Document>
My questions:
1. Is any way or technique to delete this data 0000084202008-11-0511:37 in XI from this file ?
2. Is any way to get only XML from this file ?
Thanx .
Regards,
SeoHi Buddy
What is the XI adapter using?
If you use inbound File adapter content conversion you could replace these values with none and then pass it to the scenario.
Does that help?
Regards
cK -
Issue with Input Ready Query in Integrated Planning.
Hello Everyone,
I've been working on Integrated Planning for some time now. My company recently started using a new server for this work. I find that I am unable to make the queries "input ready". Though I edited the properties of the key figure to "accept user entered values" and chose the option to "start query in change mode", when I execute the query, I find that it the values for the Key Figure cannot be changed. I tried to search in the OSS for any note(s) regarding this issue, but was unable to come up with a solution. Is the problem related to the server or is there some other configuration that I should take care of? Additionally, I would also like to know if there is any method to debug such a problem. I would appreciate it if someone could help me out in this regard.
Thanks,
Jake.Hi,
Please verify the following.
1. Check if the underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. If you have created an aggregation level, Check if the most detailed information is available at that Aggregation Level(i.e, include characteristics so that the record can be uniquely identified at that aggregation level).Best would be to include all characteristics and create a query first and ensure it works.Then remove unwanted charecteristics one by one, so that you can fix the issue.Best thing to start with is to create the aggregation level on top the real time cube itself.
3. Check for any characteristic restrictions been defined for the real-time cubes.If so, try removing them temporarily and execute the query
4.Also check if any data slices has been created on the real time cube. If so, try removing it temporarily and then execute the query.
5. Set the property for Planning "Start query in Change Mode"- this is for th Query
6. Set the 'Key Figure' Planning Property to "Can be changed Manually or via Planning Functions" for the appropriate KeyFigures- this is for the key figures
7. Try removing the currency/unit from row/column. Try restricting them in filters rather than in row/columns.
8. Check if there are any locks occurring due to filter., i.e if you are using a filter and even if 1 record of this selection locks with another user's selection you lose the input readiness.
Mostly this should fix the issue. Assign points if this info helps you.
Thanks,
Balaji. -
I'm coding a program that takes a input like this :
Sample Input
1 11 5
2 6 7
3 13 9
12 7 16
14 3 25
19 18 22
23 13 29
24 4 28
So I wrote a code like this :
public static void main(String[] args) throws Exception{
BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
String input = null;
while((input = br.readLine()) != null) {
StringTokenizer st = new StringTokenizer(input);
int leftX = Integer.parseInt(st.nextToken());
int height = Integer.parseInt(st .nextToken());
int rightX = Integer.parseInt(st.nextToken());
.... rest of the code....
But unlike I expected, the program did not pass the while loop.
When I observed in debugging mode, when "br.readLine()" has no more strings to read,
the whole program just becomes idle doing nothing, and it does not proceed further.
Is there any problem with my code there? I've been trying to figure it out for hours... Please help!!!myunghajang wrote:
Why doesn't it work in a way I intended? BufferedReader returns null if there is no more string to read, and what's the problem?
It's so frustrating...The computer doesn't have a mind reading input, how is your program supposed to know you have finished typing the input?
If you put the data in a file and redirect it into your program on the command line it will work (because the file knows where its end is)
Your program could instead assume that a blank line is you end of input. -
hi!
i've a problem with user input in my application:
Code:
BufferedReader F_reader = new BufferedReader (new InputStreamReader(System.in));
Fs_line = F_reader.readLine();
My problem is that i've to press the return key for two times, before the JDK returns the line! Does anybody know a better solution with JDK 1.4.2?
thanks for help
mikeit was a mistake of our own implementation! code ist correct! any circumstances are our eval!
thanks mike -
GP and VC problem with input parameters
Hi
I have a problem with my GP dynamic approvals..
I am trying to pass the parameters from one level to another level in GP using Visual COmposer screen with input and output parameters.
When I see in NWA, I can see the ouput parameters of Screen1 is passed to input of Screen2 but I am not able to get the values in VC Screen.
This scenario was working fine earlier.
THe VC screen is same for all the approvals , I am doing dynamic approvals using predefined conditional callable object and looping it.
any suggestions..I have solved myself, I am sending html tags from one level to another level like <html></html> - these tags are not allowing VC screen to get all the parameters and they are blocked. I removed the tags, then I am able to get the parameters passed.
-
Problems with Cluster Ready Service installation (RAC) in Oracle 10g R1
Hello
I have got problems with this installation. I am starting Oracle user
At the end of the installation I get a mesage when all Configuration Assistants are failed
I have got 2 computers with Windows 2000 PRO, two networks (private and public)
As a shared disk I use one external disk (with USB) attached to one computer.
What to do here?
please for a reply
Martin
PROT-1: Failed to initialize ocrconfig
SCLS error 1 reading current privileges.
Internal Error Information:
Category: 1234
Operation: scls_iddb_has_privgrp_by_name
Location: NetLocalGrou
Other: get local group failed
Dep: 0
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
ignoring upgrade failure of ocr(-1)
failed to configure Oracle Cluster Registry with CLSCFG, ret 102
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Notification Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/racgons.exe add_config migi:4948'
Start output from spawned process:
End output from spawned process.
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Private Interconnect Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:cluster_interconnect "public"/192.168.1.0:public'
Start output from spawned process:
PRIF-12: failed to initialize cluster support services
End output from spawned process.
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
PRIF-12: failed to initialize cluster support services
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
User Selected: Yes/OK
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian -
Workflow problem with status Ready
HI,
I have a problem with the workflow not getting completed.
The workflow is for the employee attendace 20000081 .
After the manager of the employee accepts the leave application posted by employee , The workflow is in the following state: -
ID 000000340552 Work item type Background step
Work Item text Find Employee .
Status <b>Ready</b>
Now the question is there any background job which needs to be scheduled for changing the all the workitem with status 'Ready' to be executed .
since once I execute this step manually then the workflow again goes in the ready status with the next step and the next step in this case is 'Create attendance/absence' This stpe of the workflow is in again status 'Ready'.
Please let me know if some know about this problem.
Thanks in advance .
AnkurHi ,
Thanks for the prompt reply.
I have tried the auto customizing and I am geeting the following log generated :
Auto-Customizing: General tasks
E WZ:119 Instances for task TS60001307 already exist
Task TS60001307 not classified as general task
E WZ:119 Instances for task TS70008037 already exist
Task TS70008037 not classified as general task
E WZ:119 Instances for task TS70008125 already exist
Task TS70008125 not classified as general task
And while checking the customizing setting in SWU3 the folling entires exists but as I understand the seeting is proper, please have alook below:
An active plan version exists
Workflow administrator maintained
RFC destination: User locked
Generic decision task classified completely
Tasks for document generation fully classified
T77* tables all available
Monitoring job for missed deadlines is scheduled
Monitoring job for work items with errors is scheduled
Sending to objects and HR objects activated
Entries missing in PD control tables
Default Domain for Internet Mail Maintained
Workflow development environment
Customizing incomplete
Prefix numbers for standard object types maintained
An active plan version exists
T77* tables all available
Number range defined for customer tasks
Entries missing in PD control tables
Please let me know if this is not proper .
Thanks and Regards,
Ankur -
Newbie, having a problem with Input in Java
Hello, Thank you for reading this!
I am having a hard time understanding this.
I am having an awful time with Input into variables. The following code I have got where what I type in anything from the keyboard it stores it in the variable String "name", but when I do an If statement with the variable it does not equal when I want it too.
Example,
If I type in "yes" and it should display in the output
You said yes
science
It will do the first part, what I typed in but when I say
if answer == "yes" then display science
it always goes with the else statement.
It is little things like this that blows my mind. How am I going to tell it with an conditional operator if it does not look at them the same?
It says I typed in yes I know this by thr System.outprintln("You typed, answer);
but when I do an if answer == "yes" and inside the variable "answer" is "yes"
it will not match.
Why????????
Is it because I am also pressing the enter key and it see's this?
I have read the book over and over, I don't know what I am missing.
When you look at an Input example in the book they are almost always numbers like:
If (temp <40)
System.out.println("Not freezing");
Please help me with the input and conditions.
Below is just simple code, look at the If area?
import java.io.*;
public class test
public static void main(String args[])
String name;
BufferedReader reader;
reader= new BufferedReader(new InputStreamReader(System.in)); System.out.println("Do you want to take the test? answer yes or no");
try {
answer =reader.readLine();
System.out.println("You said " + answer);
if (answer == "yes")
System.out.println("Science");
else
System.out.println("Arts");
catch (IOException ioe) {
System.out.println("I/O Exception Occurred");You could tidy it up a bit on other ways too;-import java.io.*;
public class test{
public static void main(String args[]){
String answer = "";
BufferedReader reader= new BufferedReader(new InputStreamReader(System.in));
System.out.print("Do you want to take the test? Please answer \"yes\" or \"no\": ");
try {
answer =reader.readLine();
System.out.println("You said " + answer);
answer = answer.toUpperCase().trim();
if (answer.equals("YES") ) System.out.println("Science");
else System.out.println("Arts");
catch (IOException ioe) { System.out.println("Exception "+ioe); -
Problem with all ready installed SAP R/3 4.7
Hi expert,
well i need ur help.
i have installed SAP R/3 4.7 in my laptop for learning purpose it was working perfectly but few days ago there was some problem with my booting files. i have installed Windows server on C drive sap data on D drive and Windows XP on F drive. now due to booting problem by mistake my EDP guy has installed xp on C drive without effecting to partition and he found all sap data safe.
now what is the solution to again start SAP?? like do i need to again install SAP after formatting the laptop?? or i can start it by only reinstalling the Windows server?? kindly help me out i am in big trouble..
looking for your help.
Irfan.
09228466129
Edited by: Irfan Shersia on Mar 31, 2008 2:59 PMhi guys,
well i m wondering but i have got solution form one system administrator...!! he has simply copy some file from his PC and past in laptop with the help of one software, hardly it takes two minutes and my Windows server & SAP application works perfectly....!!!!!
still thanks to help.
Irfan. -
Problem with Input help inside an adobe interactive forms
Hi Experts,
I'm currently implementing a Webdynpro ABAP application containing a Interactive forms.
I'm using Adobe Live Cycle Designer 8.0, Acrobat reader 9.2, Internet Explorer 7.0
My problem is that when I click on the "input help" button inside the adobe form, he automatically refresh all the forms UI element with their initial values. Is-it a refresh event included when we pressed the "Input help" button or an other event? How Can I deactivate that action, event?
Because since he automatically refresh my form data I loose the context current values.
Thanks in advance,
LouisP740741 wrote:>
> Hi Norbert,
>
> Thanks for reply, yes I use ZCI and I inserted the Webdynpro script through Utilities.
>
> Best Regards,
> Louis
strange, but you could compare the version of the zci scripting
in your form in the hierarchy tab there are variables and the ContainerFoundation_JS script --> the first line
// DO NOT MODIFY THE CODE BEYOND THIS POINT - xxxxxxxxxxxxxxxxxxxxxxxxxxx - ContainerFoundation_JS gives you the requested information about the scripting version...have a look at this version...
norbert
perhaps this note helps:
Note 999998 - Analyzing errors with Adobe Integration of Web Dynpro ABAP
--> for debugging!
A client debug function is available as of SAP NetWeaver Release 7.00 Support Package 19 (or after you implement Note 1287114) and for all Enhancement Packages. Activate this client debug function using the URL parameter "sap-wd-clientDebug=X" (attach it to the URL using "&"). You can then activate the client trace using the key combination <CTRL><ALT><SHIFT>T (move the focus to a Web Dynpro UI element, for example, to an InputField, do NOT move the focus to Adobe Reader). The system opens a new browser window with the trace output. The trace may contain an error entry ("Network Error", and so on). The URL also activates the Adobe document services (ADS) trace. The trace outputs of the ADS are copied to the generated PDF document as an attachment. Open the file "Error.pdf" of the ADS trace: Form errors (for example, script errors) are listed there.
Edited by: Norbert Prager on Oct 24, 2009 7:31 PM -
Problem with Input out put parametes of IViews in callable objects
Dear Friends,
I have designed model which contains 2 IViews
Apply leave IViews
Approve leave Iviews
In both the cases i have exposed the in & out parameters using start & end point.
Finally deployed in portal successfully
Guided procedures ->Design Time
I have created folder
when i create callable objects using this IViews , i dont see the input & out put parameters exposed in context parameters tab for this IView.
Any step i missed.
Regards
shekar ChandraHI Nishi
struck up with minor problem,
We have a application designed in VC.It contains
Create request
Approve Request(approve or reject buttons)
IF approved then
a.Book Request IView
b.Summary Iview
If Rejected then
a.rejected IView.
When i am designing Process with Sequential block,
all the actions namely
create request
appprove request
reject
book
summary
are processingone one by as action mentioned in sequential block irrespective of approved or rejected.
I cannot go for alternative block, since the result state buttons are desinged in IView only namely(Approve/reject).
How to overcome this probelm any suitable solution?
regards
shekar chandra -
Problems with input accented characters after moving JInitiator to JDK 1.5
After upgrading from JInitiator 1.3.1.18 to JDK 1.5.0_06 (jdk plugin in IE), the input of accented characters (in our case portuguese) isn't working anymore in text areas on the forms (Forms 10g).
So, if you push first the "´" key and then the "a" key, you should get as result "á" (worked correctly with JInitiator), but after upgrading to JDK 1.5 you will get simply a letter "a".
Pressing Alt + 160 shows correctly "á".
Somebody can give a clue about this problem please?
Downgrading again to JInitiator is no option for us, as we need a more modern JVM (for a Dicom viewer applet we developed), and IE crashes if you have an Oracle form running with JInitiator, and then try to open another IE page with an applet requesting JVM 1.5 ...
Thanks a lot for your comments.
Alberto A.Smulders
HostDat Lda. - PortugalIn IE, the server must be in the Trusted Sites list & the security for Trusted Sites set to low
Tools -> Internet Options
Security Tab
Sites button
Add all Forms servers, or use a wildcard to get your entire domain. If you are not using SSL, uncheck the "Require server verification (https:) for all sites in this zone"
Set the Security Level for this zone to Low. If the slider bar is not there, click the Default Level button, then slide the security setting to low.
Maybe you are looking for
-
Does PP CS6 support DV output with MPE (CUDA) Hardware Acceleration turned on?
I am wondering if Adobe has addressed the issue of not allowing DV (firewire, ieee1394) output when MPE is turned on with hardware support? Any ideas? I am using CS5.52 and wonder if this is corrected in CS6. Thanks, Doug A
-
Access MySQL Database on Server with PHP Services
Hi there There are lots of tutorials on how to connect to a MySQL database on your local machine but I'd like to access a database on my server. When creating a new Flex Project the wizard asks me to define a Web root and a Root URL. I used '/home/ec
-
GoLive CS2 & Win7 - "Unknown Publisher"
This may be more of a Windows 7 issue than an Adobe/GoLive one...but I thought someone here might be able to help! Whenever I open GoLive CS2 in Windows 7, I get the User Account Control pop up window, asking me if I want to allow the program "from
-
Received message 1 million visitor week prize .how i accept this prize
Confirm my e-mail address.
-
I am backing up my system onto an external drive using Time Machine. Will the file structure of my system drive be replicated? Will I be able to go onto that drive and grab a library or preference file? Or is it going to be in some impenetrable machi