Currency is not showing in the result out of BW report.

Hi All,
I created a report, In the report out having key figure called "Amount", In the result its displaying as Amount =100, But as per the user requirement I need the amount value as Amount=100 EUR or MYR or GBP or USD like this.
The keyfigures having property as fixed currencty as EUR, I made the mapping to 0loc_cuur, 0doc_curr in BW , In the cube output I can see the values populating in the currency columsn.
In the query also doesn mention DIM id and its direct key fgures.
Could you please give me some suggestins to get the currency with amount 100EUR.
Is there any possiblity to write the abap code and concatenate the values in the report 100EUR or 100GBP like this.
Thanks in Advacne.
laks

Hi Laks,
Check this KF property in RSD1.
If it has fixed currency 'EUR', then all the values will be reported only in EUR. your mapping of 0LOC_CURCY will not work.
Now, in order to populate different currencies coming from the transaction data, you need to assign a reference currency object to this key figure. ( for ex 0LOC_CURRECY ).
It will not be possible for you to change the ref currency, unless you delete the data in all the infoproviders which are having this key figure.
If you can delete the data, then you can change the ref currency after data deletion and map this reference currncy to the source currency.
Let me know, if there are any other amount key figures in the same target and what are their reference currencies.
Thanks,
Krishnan

Similar Messages

File input does not show up the result in OWL

Dear experts,
In the training material in chapter 3 step 9 there was a part talking about file input.
It works perfectly until I checked the WoC. There is no result showing up in the work center although in execution details there was a green dot and no errors.
Has anyone had similar issue? Where should I check to ensure that the mass data run works properly?
Many thanks
Cheers
Linh Hoang

Linh,
Latest update, which may help:
I did manage to get a file to work.
Here's the basic structure of my XML (i've renamed the elements):
<?xml version="1.0" encoding="UTF-8"?>
<MyCustomBusinessObjectUploadInputRequest>
<MessageHeader>
<CreationDateTime>2014-08-11T09:48:04.000Z</CreationDateTime>
<TestDataIndicator>false</TestDataIndicator>
<ReconciliationIndicator>false</ReconciliationIndicator>
</MessageHeader>
<List listCompleteTransmissionIndicator="true" actionCode="01" reconciliationPeriodCounterValue="123">

<MyCustomBusinessObject actionCode="01">
< ...Data Elements...>
</MyCustomBusinessObject>

</List>
</MyCustomBusinessObjectUploadInputRequest>
Here's what i'm currently working through now - if i have a single file with this structure in Unprocessed Files, and execute the run, it does work.
However, if i upload two files and run them both at the same time, it either takes a lot longer to process, or sometimes nothing happens. Both files work individually, but it seems very intermittent when processed together.

I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

Hi Marcel1no,
Welcome to the Apple Support Communities!
I understand that it can be frustrating when an application downloaded from the App Store is not behaving as you would expect. In this situation, I would recommend using the attached article for information on troubleshooting apps downloaded from the App Store.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Cheers,
Joe

When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Other than that, what version of iPhoto do you have? Assuming 09 or later try
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum

How can I show all the results returned by a sql query?

Hi guys,
I need your help.
Let's say I have one table: TableA. Fields of TableA are aleg, anon, apes. The following sentence can return, in general, several rows: select anon from TableA where aleg = somevalue. I'd like to show the result of column anon but no luck. If I try to show the results in a TextArea and the origin is an sql query only shows the first row value. I tried Show as: show as text (based in PLSQL) and coding an anonymous plsql block as
DECLARE
v_anon TableA.anon%TYPE;
CURSOR v_cur IS
select anon from TableA where aleg = somevalue;
BEGIN
OPEN v_cur;
LOOP
FETCH v_cur INTO v_anon;
EXIT WHEN v_cur%NOTFOUND;
:FIELD_IN_FORM := v_anon;
END LOOP;
CLOSE v_cur;
END;
but in this case it's not shown any result.
So the first question is what kind of field should I use to show the result. And the second one is what can I do to being able to show all the results returned by the query (provided that is more than one single row).
regards

Hi Denes,
Just starting with apex. I think I know how to show the results in a report region. I've simplified the posted question.
A more detailed question would be: Suppose you have a region where you have put several text areas to accommodate the result of a multi-column query (lets say for TableA) that only returns one row, each column value returned put in a different text area. Also you want to show the values of other fields in TableB that depends on some value just retrieved from TableA and that you want all values retrieved (from TableA and the linked TableB) to be show in the same region. Is that possible? If yes, how?
Thank you in advance

How can I connect my new iPhone to my iTunes account on my computer? It is not showing in the devices when I connect it.

I bought a new Iphone and I was unable to update with my iTunes because they wouldn't let me leave the store with out checking the camera and speakers. I had to start the phone. I tried connecting to iTunes when I got home but it's not showing in the devices. Please help me.

Look at this for possible solutions: iPhone, iPad, or iPod touch: Device not recognized in iTunes for Mac OS X, http://support.apple.com/kb/TS1591

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

My Online number is not showing to the phone I am ...

When I am calling to any other phone using skype, my online number is not showing in the CLI of that phone.
But When I call to my Online number, I can receive calls in my skype.
This is happening after I extended my Online number.

nilaydiya wrote:
When I am calling to any other phone using skype, my online number is not showing in the CLI of that phone.
But When I call to my Online number, I can receive calls in my skype.
This is happening after I extended my Online number.
It is possible that the Caller ID settings got wiped out when you extended your Online Number. This is, unfortunately, something other users have reported. I'm sorry it happened to you.
To reset your Caller ID settings, log into your Skype account here on the Skype web site. Use the "Account" link at the top of this page, and enter your Skype name and password. Then you can access your Caller ID settings, and select your Online Number to - once again - be your Caller ID.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

All value not showing at the time of J1INCHLC - Create Remittance Challan

Hi,
I am facing following problem in TCS
I am trying to process TCS Remittance Challan with T.code J1INCHLC, but all document No. not showing at the time of challan process, I checked entry in TCS GL, Table BSEG & WITH_ITEM all document showing properly. Section code also showing in line item.
I checked some document process with same material & same customer. But only few entries showing at the time of TCS Remittance Challan process. I also compare both entries which is showing & un-showing but no difference found.
Kindly suggest solution to resolve the issue.
Sunil

Hi Sunil
If the entires are there in WITH_ITEM and with Section codes, then it should appear in J1INCHLC. Please check other things like the date ranges you are entering in J1INCHLC. Also try by putting the document number which is missing instead of posting date range and fine out whether is it appearing. If you are able to get it, then you would be in a position to find out why it is not appearing.
Regards
Prasanna

Payroll cheques posted to GL in PCP0 but not showing on the cheque register (FCHN)

Our Finance is trying to find out what happened with a few Payroll cheques from early 2013. We can see that they were posted to GL 100300 in PCP0, but the cheques are not showing on the cheque register (FCHN).
Does anybody have any ideas to help mefind out where they went or what happened? Would appreciate any advice.

Hi Tatiana,
Possibly that print check program was never run for the employees using transaction PC00_M10_FFOC.
Please note that you will need a check lot and banking configuration set-up done for this transaction to run successfully.
Table REGUH stores information about your pre-dme for each of employee for run number and run identification.
You will need to check table PAYR and see if the employees have entry in it and if they have then if they have check number or not.
Table PAYR is read by check register to find employees' check numbers.
Hope this helps.
If you see check numbers in table PAYR for employee, please verify if you have entered correct selection on selection screen for check register importantly the check box for Payroll Checks is checked.
Also, if possible please send across screenshot of your selection screen.
Thanks,
Ameet

My podcast artwork is not showing in the iTunes store or in the Podcasts app

My podcast, the Legal Seagull, was recently posted to iTunes. The problem is that the artwork is not showing in the iTunes store or on the iPhone's Podcasts app. Once you actually download the episodes, the image does appear.
I verified that my image is 1400 X 1400; however, it does appear to be around 700kb. I have seen some posts about how you should try to keep it under 500kb, but I haven't seen anything official from Apple to that effect.
I note that there is a man out there called Roger Wilmut, who is extremely knowledgable about this issue and has responded to many similar questions. Mr. Wilmut, if you are out there, could you please advise whether my feed is set up correctly? If it is just a waiting process, I'm fine with that- I just want to make sure that I've set everything correctly on my end.
Feed: http://www.thelegalseagull.com/feed/podcast
iTunes link: https://itunes.apple.com/us/podcast/the-legal-seagull-podcast/id886005819?mt=2
Thanks!

OK, looks like the problem has resolved! All it took was a few days of waiting patiently

Messages are not showing in the SXMB_MONI

Hi...All,
we are doing FILE-RFC synchronous scenario with out BPM, in the communication channel monitoring it was showing success, but in File server file is not coming to target side from sender, messages also not showing in the SXMB_MONI.
how can i solve these issues, pls suggest me...
thanks in advance,
Jain.

Hi,
Please follow the steps below to see the synchronous messages in sxmb_moni
Step 1. Go to transaction SXMB_ADM
Step 2. Click on Integration engine configuration
Step 3.Go to Edit - Change specific configuration data
Step 4. Add the paramaters:
LOGGING and LOGGING_SYNC category RUNTIME current value = 1 (active)
PS: You can also set TRACE_LEVEL to 3 so that all processing steps and details will be logged.
Reward points if answer is useful.
Thanks
Amit

Conversations not showing in search results

I'm experiencing an issue where every other aspect of Search seems to be working as expected but when I do a search and select "Conversation" nothing ever shows. If I go directly to the results type page (conversationresults.aspx), I see a few
things but not much. I'm not even sure where to start here. The result type exists and has never been modified. People search and all other types of search are working fine. I have no errors on any of my content sources.
Some additional details have come to light. Discussions appearing on Community Sites are showing in search almost immediately in the conversation search but I'm still not getting anything from the news feed and the "Trending Tags" web part is not
showing anything either.
I have verified the issue discussed in this question (AnalyticsHashTagWebPart Showing No Results) is not what is causing me problem.

It looks like someone had messed with the content sources. I added the newsfeed URL back to content sources and started a crawl and just like magic, conversations started showing in the results. I think the "Trending Tags" issue is not related.

Apps needing access to Contacts are not showing in the Privacy pane of security

I have apps like cobook and Alfred that need access to Contacts but they are not showing in the Privacy pane of the Security & Privacy System Preferences.

Back up all data.
Triple-click the line below to select it:
~/Library/Application Support/com.apple.TCC/TCC.db
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out, log back in, and test. All your privacy settings will be reset to their defaults. If there's no change, put the item you moved back where it was, overwriting the one that may have been created in its place, and log out again. Otherwise, delete the item you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Vertical scrollbar not showing all the records when I scroll down.

Vertical scrollbar not showing all the records when I scroll down.
Using Oracle forms 10g , operating system windows
I have two fields with number of items dispayed = 15.
I have a vertical scroll bar with them. There are 34 records in the table but the scrollbar only shows 15 records.
Here are the properties for block / scrollbar.
WORK_CATEGORY
- Subclass Information
- Comments
* Navigation Style                                Same Record
- Previous Navigation Data Block
- Next Navigation Data Block
- Current Record Visual Attribute Group
- Query Array Size                                0
- Number of Records Buffered                      0
* Number of Records Displayed                     60
* Query All Records                               No
- Record Orientation                              Vertical
* Single Record                                   No
- Database Data Block                             Yes
- Enforce Primary Key                             No
- Query Allowed                                   Yes
- Query Data Source Type                          Table
* Query Data Source Name                          WORK_CATEGORY
* Query Data Source Columns
* Column Name                                   JOB_TYPE
* Column Type                                   VARCHAR2
- Column Type Name
- Parent Column
* Length                                        30
* Precision                                     0
* Scale                                         0
* Mandatory                                     Yes
* Column Name                                   WORK_CATEGORY
* Column Type                                   VARCHAR2
- Column Type Name
- Parent Column
* Length                                        30
* Precision                                     0
* Scale                                         0
* Mandatory                                     Yes
- Query Data Source Arguments
- Alias
- Include REF Item                                No
* WHERE Clause
* ORDER BY Clause                                 job_type
- Optimizer Hint
- Insert Allowed                                  Yes
- Update Allowed                                  Yes
- Locking Mode                                    Automatic
- Delete Allowed                                  Yes
- Key Mode                                        Automatic
- Update Changed Columns Only                     No
- Enforce Column Security                         No
- Maximum Query Time                              0
* Maximum Records Fetched                         0
- DML Data Target Type                            Table
- DML Data Target Name
- Insert Procedure Name
- Insert Procedure Result Set Columns
- Insert Procedure Arguments
- Update Procedure Name
- Update Procedure Result Set Columns
- Update Procedure Arguments
   Don't know where am I going wrong. I'll really appreciate if you can help me in this.
Thanks.
Edited by: 831050 on Sep 14, 2011 8:05 AM

One of the items is a list item.. here are it's properties:
* Name                                          JOB_TYPE
* Item Type                                     List Item
- Subclass Information
- Comments
- Help Book Topic
- Enabled                                       Yes
* Elements in List
* Label
* List Item Value                             LIST20
* List Style                                    Combo Box
- Mapping of Other Values
- Implementation Class
- Case Restriction                              Mixed
- Popup Menu
- Keyboard Navigable                            Yes
- Mouse Navigate                                Yes
- Previous Navigation Item
- Next Navigation Item
- Data Type                                     Char
- Data Length Semantics                         Null
- Maximum Length                                30
- Initial Value
* Required                                      Yes
* Copy Value from Item
- Synchronize with Item
- Calculation Mode                              None
- Formula
- Summary Function                              None
- Summarized Block
- Summarized Item
- Current Record Visual Attribute Group
- Distance Between Records                      0
* Number of Items Displayed                     15
- Database Item                                 Yes
* Column Name                                   JOB_TYPE
- Primary Key                                   No
- Query Only                                    No
- Query Allowed                                 Yes
- Insert Allowed                                Yes
- Update Allowed                                Yes
- Update Only if NULL                           No
- Visible                                       Yes
* Canvas                                        CANVAS2
- Tab Page
* X Position                                    47
* Y Position                                    137
* Width                                         187
* Height                                        18
- Visual Attribute Group                        DEFAULT
- Prompt Visual Attribute Group                 DEFAULT
- Foreground Color
* Background Color                              white
- Fill Pattern
- Font
* Font Name                                     Tahoma
* Font Size                                     10
* Font Weight                                   Demilight
* Font Style                                    Plain
* Font Spacing                                  Normal
* Prompt                                        Job Type
- Prompt Display Style                          First Record
* Prompt Justification                          Start
* Prompt Attachment Edge                        Top
- Prompt Alignment                              Start
* Prompt Attachment Offset                      10
* Prompt Alignment Offset                       0
- Prompt Reading Order                          Default
- Prompt Foreground Color
- Prompt Font
* Prompt Font Name                              Tahoma
* Prompt Font Size                              10
* Prompt Font Weight                            Bold
* Prompt Font Style                             Plain
* Prompt Font Spacing                           Normal
- Hint
- Display Hint Automatically                    No
- Tooltip
- Tooltip Visual Attribute Group
- Direction                                     Default
- Initial Keyboard State                        Default
- Keyboard State                                Any

Currency is not showing in the result out of BW report.

Similar Messages

Maybe you are looking for