Currency issue in bex

hi all,
i have a field int eh cube with two currencies --USD & EUR.
when i execute a query on the cube  its showing only one currency of teh field ..........the other currency is displayed as  ' * '.can anyone give the solution how to make available both the currencies in a report.

Hi Satish,
Check whether your having currency conversion key is there in your sys( TX - RRC2)
if u dont find any currency conversions in u'r sys.
you can contact FI guys or create a currency conversion key
source currency as data record currency
target currency as "USD" in your case...........
maintain currency conversion spread sheet in your system
use the same currency conversion type in u'r key figure........
hope this will help you..........

Similar Messages

  • JPY Currency issue in SRM 5 Limit Items

    Hi
    We are having an issue JPY Currency issue in SRM Limit Items (550 SP 13).
    Basically the currencies like JPY, KWR where there are no decimals causes value to be multiplied by 100.
    There are lot of notes and threads on JPY currency issues.
    But I have not found one that helps fix SRM Limit Items.
    Let me know if there is a note or thread that talks about it.
    We are on SRM 550 SP 13.
    Thank You
    Nikhil

    see MDM forum

  • Issues with Bex query structures and Crystal Reports/Webi

    Hi experts,
    I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
    Budget $
    Budget %
    Actual $
    Actual %
    Budget YTD
    etc
    if I drag the structure into the Crystal Report detail section with a key figure it displays like this
    Budget $     <null>
    Budget %     <null>
    Actual $     300
    Actual %     85
    Budget YTD     250
    the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
    Actual $     300
    Actual %     85
    Budget YTD     250
    Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
    Business Objects Edge 3.1 SP2
    SAP Int Kit SP2
    OS: Linux
    BW 701 Level 6
    Crystal Reports 2008 V1
    Thanks
    Keith

    Hi,
    Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
    ingo

  • Issues with BEx Reports in SAP Enterprise Portal

    Hello Experts,
    I am facing issues with BEx reports integrated in portal. Below are more details:
    Scenario 1:
    Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
    When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
    The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
    The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
    Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
    Scenario 2:
    Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
    Helpful pointers appreciated.
    Thanks
    Vikash

    HI Suman,
    I am not adding the report to favourite using browser favourite. Below is the flow:
    Run the report in portal.
    There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs  for saving the report.:
    Favourite
    BEx Portfolio
    My Portfolio
    save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
    BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
    If I press send for unsaved report, then BEx broadcaster Wizard is shown.
    Thanks,
    Vikash

  • Subject: Displaying key figures without currency unit in BEX reports

    Hello,
    Is it possible to display key figures without currency unit in BEx reports? For example; Material Costs 1000 EUR
    should be shown as 1000. Currency unit EUR and also scaling factor (*1000 EUR) does not interest us.
    When we use display options in query properties, we just see an option of displaying key figures with/without scaling factors, which does not solve our problem.
    Thanks for your reply.
    Regards,
    Nuran Adal

    Hi Eugene,
    thank you very much for your quick reply. We have very detailed reports with min. 10 columns, I should have defined 10 more formula columns to realize this (NODIM), but anyway there is no other way to do this, am I right?
    Best Regards,
    Nuran

  • Currency translation in BEx  Analyszer.

    Hi,
    I am facing problem is currency translation in BEx  Analyszer.
    My requirement is to translate the key figures into target curreny. I have created the transaction type through RSCUR transaction.
    In the Query I have given the user to input the target cuurency.
    I have maintained the Rates also in in Transaction OB08. 
    When i execute the query the system is taking only the Direct Ex.Rate.
    If the USer Enter USD as  the Target currency, the only the Those Currency Key figures are translated where the Rate is Maitained direct.  For Example MXN-->USD.  But some Ex rate are maintained as inverse Ex. rate. Those rate are not picked.
    I want to use the Curreny translation direct as well as inverse Ex. Rate.
    Please Suggest.
    Re
    Nilesh

    Hi Nilesh,
                  After specifying the conversion type in the query designer, have u specified the variable in the target unit in the very next option.
    i.e the variable created by you in RSCUR trnx.
    Regards
    Sunil

  • Strange performance issue in bex report

    Hello Experts,
    I have a performance issue on my bex report.
    I'm running the report with below selection criteria and getting 'too much data' error.
    Country :  equals EMEA
    Category: not equlas 13
    Date : 02/2010 to 12/2010.
    But when I ran the report for smaller date ranges the number of records are not exceeding 13000.
    02.2010 - 06.2010 - 6,555 rows
    07.2010 - 09.2010 - 3,671 rows
    10.2010 - 12.2010 - 2,780 rows
    I know excel can't fit more than 65000 records, but I'm expecting 13000 records for my wide date range which excel can easily fit.
    Any ideas on this one will be appreciated.
    Regards,
    Brahma Reddy

    Hi,
    For Question 1:
    In query designer Go to the Query properties and select the tab "Variable Sequence", here you can set the order of variables as per you requirement.
    For Question 2:
    There will be a option "Hide Repeated Key values", if you uncheck this option then you will have the values for each row even though the material values are same.
    Note; if you are viewing the report in web or WAD report you need to make the same changes in the Web template also because the settings in the query designer will be overridden when you run the query in web.
    Hope this helps.
    Regards,
    Rk.

  • Issue in BEx Report

    Hi All,
    Question 1 ) I have an issue in the variable selection screen, because i need to change the Variable field from 3 to 1 for e.g
    1 ) TESTVAR1 (Material)
    2) TEST VAR2(Vendor)
    3) TESTVAR3(Plant)
    Now i want to display Variable popup screen as shown below
    1 ) TESTVAR3(Plant)
    2) TEST VAR2(Vendor)
    3) TESTVAR1( Material)
    Please let me know how to fix it?
    Question 2) In BEx Query, Report output for MAterial should be displayed as shown below
    for E.g
    Material                  Plant                    Qty
    MAT100                 2222                    25
    MAT100                 3333                    34
    MAT100                 4444                    45 
    MAT200                 8888                    78
    MAT200                 5556                    67
    But  now , data is displayed for MAT100 only once under Material section ,for plant 3333 we are not able to see the material , Please let me know how to fix the issue.
    Material                  Plant                    Qty
    MAT100                 2222                    25
                                  3333                    34
                                  4444                    45 
    MAT200                 8888                    78
                                  5556                    67
    Thanks  & Regards,
    Nithi

    Hi,
    For Question 1:
    In query designer Go to the Query properties and select the tab "Variable Sequence", here you can set the order of variables as per you requirement.
    For Question 2:
    There will be a option "Hide Repeated Key values", if you uncheck this option then you will have the values for each row even though the material values are same.
    Note; if you are viewing the report in web or WAD report you need to make the same changes in the Web template also because the settings in the query designer will be overridden when you run the query in web.
    Hope this helps.
    Regards,
    Rk.

  • Issue with Bex report - key Figures not populating correctly.

    Hi Experts,
    I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
    When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
    Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
    Thanks,
    Anamika
    Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

    Hi,
    The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
    Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
    Please guide accordingly.
    Many thanks,
    Anamika

  • Currency issue in S_ALR_87013558 report.

    Hi Experts,
    I have an issue here with 558 report, budgeting has been done in CAD currency and PR has been aslo made in CAD.
    But when i run this report i get the main budget in CAD, while commitment, assigned and available shows in USD.
    It should come in CAD, i also tried to change the currency in 558 report via currency symbol, that is converting USD to CAD but at the same time it converts main budget (which was already in CAD) again to another value based on that conversion rate its converting to commitment.
    I have been through all the posts on SCN, but couldnt find any precise answer.
    Please help me getting the uniform values in 558 report.
    Thanks,
    Vindhesh

    Thanks for your reply Saurabh!!
    But i have already tried this option and its not showing the correct values, let me explain you when i convert the available colomn it converts in CAD from USD but now this value is something different as per rule avail = budget - assigned.
    And second thing suppose PR is done into CAD & in 558 report i get it in USD so when i convert it to CAD it takes the current (or any) conversion rate which makes a difference from the real value.
    I want to see the uniform values in S_ALR_87013558 report as i have posted in CAD so same values should be displayed in report, suggest me how it is possible.
    Thanks,
    Vindhesh

  • S_ALR_87013558: Currency issue

    Hello All,
    we are facing below issue with the S_alr reports , for example S_ALR_87013558 # budget/ actuals/ commitment/ available etc..
    Our controlling area currency is USD and project currency is EUR.
    My userid's RPC0/RPXn setting is to the Controlling area currency.
    however whenever we execute this report, it shows report in some different currency neither USD nor EUR.
    We know currency can be changed in report using currency conversion icon and choosing translation key. but lot of our users do not have authorization to change the currency setting in P12 and need to know how we could set controlling area currency (USD) as default for these reports so that report will have common currency for all the users.
    regards, Madhusudan Patil

    Hello Sreekanth,
    Thanks for the reply.
    However i checked all transactions like RPXN, RPC0, RPP0 or RPCN.
    In-fact I observed that once you change setting in either of the transactions, it gets applied to all but still the S_alr repirt shows in different currency.
    regards, Madhusudan Patil

  • Variable screen issue in BEX !!

    Hi Gurus,
    Problem Description - When any query is opened through u2018Web BEx Analyzeru2019->u2019New Analysisu2019 button in portal , variable screen is shown and report is getting executed. Again, if we open same query from u2018Web BEx Analyzeru2019->u2019New Analysisu2019 (Donu2019t close the session use same session), Variable screen will NOT be shown at Second time. Directly, Query will be executed with previous Variable values & result will be shown.
    I have modified following parameters but it did not take any effect to the variable screen problem.
    VARIABLE_SCREEN, MELT_VARIABLES, VARIABLES_CLEAR, USE_PERSONALIZATION
    100% points are assigned
    kindly do the needy
    Sherwin
    Edited by: sherwin paul on Jun 24, 2008 1:13 PM

    Paul,
    I have experienced similar issues with the behaviour of variable selection screens e.g. variable screen appears in the Bex Excel version but not the web version. One of our consultants has suggested that the behaviour depends on whether the variables are optional or mandatory, something I've yet to confirm.
    Regards,
    PP

  • Issue opening BEx query in Query designer

    Hi Expert,
    I am facing issue while trying to open a query in the BEx query designer. The query designer opens, then i search for the query and double click to open it. The system hangs there and the query never opens up.
    System details BW 7.3 SP9
    Please let me know how to resolve this issue.
    Thanks,
    Anupama

    Hi Anupama,
    Check your system SAP GUI is latest one or not.
    If not ,then uninstall your existing SAP GUI along with all Bex client tool(ex -Analyser,Query Designer,etc) and install latest one.
    I already faced same issue .so your problem will solved after doing above steps.
    Regards,
    Rajesh

  • Issues in BEx Broadcasting through email

    Dear Experts,
    I am currently facing a very weird issue while broadcasting BEx reports. What i have noticed is that it is not possible to schedule the same report with two different settings at the exactly same time.
    Suppose the Bex report name is DEMO_QUERY. Now i want to schedule it with two different technical settings for different selections but at the same time, say 8:00:01 AM. When i schedule the report, i get no errors. But at the time of execution, only one them is broadcasted and the other fails with the following generic error.
    Java system error: Exception in method processFunction.
    Message no. RSBOLAP018
    Now this error has been widely discussed on SCN but none of them fits my scenario. The resolution provided in many threads points to running a diagnostic tool on the portal. I have even checked the number of processes allocated to BROADCAST and so on.
    But if i space the two settings by say one minute or so, i get both the broadcasts. So i want to learn that is there a technical w.r.t BEx broadcaster which prevents it from broadcasting same report at same time with two different settings.
    Thanks

    Hi Michael,
    The current setting is 3,default i guess. But there are many other BEx queries which are scheduled at the same time. Problem is only encountered when the same BEx query is scheduled with multiple broadcast settings to run at the same time. If it was an issue with Java server then shouldn't it be affecting other reports also which are scheduled at the same time.
    Thanks

  • Parallel currency 2nd local currency issue

    Good morning everyone,
    I am handling and issue wherein I am finding a difference in the FS10N GL line items.
    Background-
    1. Doc currency, 1st local currency and 2nd Local currency are the same i.e USD.
    2. When I see any GL account in FS10N I dont see any issues but for the GR/IR GLs.
    It was seen when F.19 was run while analysing GR/IR clearing accounts.
    I have 3 GLs that I am investifgating-
    GR/IR exp offset oth- P& L type
    GR/IR -analysis adj - Other  -B/S type
    Vendor control -Other - P& L type
    All the above mentioned are GR/IR relevant accounts.
    Need help On?-  Inspite of the Doc currency, 1st local and 2nd local currency being USD; the 2nd local currency shows a different value for some line items.
    Although Doc and 1st local currency are always same.
    Please assist.
    Thanks & regards
    Rajdilip
    9920845568

    Hi Madhu,
    I did not yet close the Defect but had to raise a query with SAP about the same.
    I do not really know the symptoms of your issue yet.
    What I have done is -I got the Business run F.13 for all old uncleared stock for all previous years that do not make sense to be still available uncleared in the system.
    Then get the open items identified by the Business so that we can decide if we can clear the unclearable open items that we encounter after running F.13 and use MR11 this time but with careful selection and approval.
    Once the available open items are in manageable numbers the performance of F.19 will increase.
    Also, you may think about implementing 2 notes after checking if they are already there in your system via transaction SNOTE-
    1058971 and 1233775.
    If you still have queries upon this, do let me know and I shall try to cater better understanding upon the same.
    Thanks & regards
    Dilip Raja

Maybe you are looking for