Currency Key Transformation (Special Purpsose Ledger to DSO)

Hi Gurus,
I would like to carry out transformation from Special Purpose Ledger Total Records Data source (3FI_SL_E2_TT) to  DSO.
Transformation should be based on:
1-Target DC should be populated if 0curtype is 0
2-Target Document Currency should be populated with Currunit if 0curtype is 0
1-Target LC should be populated if 0curtype is 10
2-Target Local Currency should be populated with Currunit if 0curtype is 10
1-Target LC2 should be populated if 0curtype is 30
2-Target LC2 should be populated with Currunit if 0curtype is 30
Example is below
Source:
0COMP_CODE     0GL_ACCOUNT     0FISCPER     0FISCYEAR     0CURTYPE     CURRUNIT     TURNOVER     
1000     100010     12007     2007     0     USD     1000     
1000     100010     12007     2007     10     ISK     60000     
1000     100010     12007     2007     30     EUR     750     
Target:
0COMP_CODE     0GL_ACCOUNT     0FISCPER     0FISCYEAR     CURRUNIT     TC     LC     LC2
1000     100010     12007     2007     USD     1000          0
1000     100010     12007     2007     ISK     0     60000     0
1000     100010     12007     2007     EUR               750
Please suggest.
Regards,
UR

If they are reconciling to PSA and RSA3, then they are for sure being aggregated by the key fields, which is difficult to analyse manually - but with a few records its managable.
Try debugging in DTP - processing mode - serial extraction and processing of source package - and have a break point at - filter out new records with the same key.
Message was edited by:
        voodi

Similar Messages

  • Generating a Report in Special Purpose Ledger

    Hi,
    Currently i am using K4 as fiscal year variant and for special purpose ledger i am using V3 as fiscal year varinat. However all documents are getting posted in relevant period. suppose if it a 1st period for financial accounting the it will be the 10th period for special purpose ledger.
    However, when i executed transction for generating the report for special purpose ledger It is not generating the report.
    Thanks
    Avinash

    Hi
    The Special purpose ledger is configured to store the data in transaction currency as well. We have configured it to store data in transaction currency, local currency and group currency.
    Thanks!
    AJ

  • How to Get the Previous Transactional Data into Special Purpose Ledger

    Hi,
    1). We have implemented Special Purpose Ledger. After implementing SPL, we are generating documents and getting the postings into SPL. Now I need to bring the previous postings which were entered before Special Purpose Ledger Setup. Please Help me on how to bring the transacctional data into Special Purpose Ledger.
    2).  Is it possible to define A/R Aging by Customers? in  Special Purpose Ledger by using Report Painter?
    3). What is the use of Allocation Cycles like Assessment and Distribution in Special Purpose Ledger?
    Please clarify me on above 3 points.
    Thanks
    Yadayya
    Edited by: Dogdays on Aug 5, 2011 8:02 AM
    Edited by: Dogdays on Aug 5, 2011 8:03 AM

    I have experience in intergrating project accounting to the general ledger in a data warehouse using discoverer to show the results.
    The solution I developed for my compnay is to ensure all entries from all sub-ledgers including manual journal entries are moved to the data warehouse tables have project information based on PA autoaccounting rules.
    The company I work for was interested in viewing reports that cubed cost centers (dept's.) to projects and to translate all entries (not just account balances) to USD for thier foriegn set of books. So, projects can be seen company wide in USD at lowest entry level. The solution I gave them solved the problem and they are able to view reports and evaluate costs by cost centers and projects on an enterprise wide application.
    If this is what you are looking for let me know.
    about my self : I have a B.S. in Computer Science (Theoretical Track) and 17 yrs of accounting and book keeping experience including consolidation and multi-currency sets of books.

  • Special purpose ledge and Account Payable-subledger mismatch

    Hi Experts,
    After linking both the SPL-Special purpose ledger data and the AP data record by record,  the Account Number in Group, Local Amount, Local Currency is different in SPL and AP for many records. They wanted to know why there is a difference in Account Number in Group, Local Amount, Local Currency for both the data (AP and SPL) and what is the business purpose behind it.
    Regards,
    Sri

    Hi,
    Use Tcode GCAC to reconcile your GL and SL.  I hope, you have not summarised data in SL; as such you will not be able to see a line wise comparison.
    Cheers.

  • Currency setup process in SPL ledger configuration

    Hi All,
    I have a urgent requirement for configuring Special Purpose Ledger and need clarification on some of the following doubts before start configuring.
    1. Can we configure SPL in the system upgraded only technical with ECC 6.0 version.
    2. How to assign a seperate Curreny in the new SPL ledger and what is the procedure for assigning and  translating the document currency of the company code assigned to this SPL Ledger currency.
    Expecting responses urgently.
    Thanks & Regards,
    LV

    Hi Max,
    I've followed the information in SAP help exactly as given.... Anyway regarding the script to run the conv prog
    *RUN_PROGRAM CURR_CONVERSION
    CATEGORY = %C_CATEGORY_SET%
    CURRENCY = %RPTCURRENCY_SET%
    TID_RA = %TIME_SET%
    RATEENTITY = GLOBAL
    *ENDRUN_PROGRAM
    The names mentioned to the left of the '=' sign represents the Dimension name as per my application right? and the names to the right of '=' sign represents the dimension members which have data loaded in the application for which we need to perform currency conversions ? Am i right ?
    And just this piece of code can be pasted in the "Defaultlogic" file right?
    Thanks,
    Prasanth

  • Problem With Currency key

    I have created a ZTABLE- having amount field and currency/qunatity field as WAERS and tcurc as reference table.
    Created a structure where i created zwaers as field and currency and quantity fields as ZWAERS and my structure name as reference table--it worked
    Now the problem is
    When I loading into DSO- I have mapped amount to 0amount  and Zwaers to 0currency- i also had the transforations for DSO and CUbe
    When I tirgger DTP, I am unable to load the  data
    When I checked in the error stact " keyfigure <> 0 not allowd for unit" and my currency field is blank in the Cube.
    I also tried in making the currency key as constant USD which didnt worked
    Please help me out with this

    hi,
    Check the unit associated with the amount field, either it is bringing incorrect value or no value. If amount field is filled and no unit value is coming in the unit field it would give an error like yours. Assign constant to the unit field and then load.
    regards,
    Arvind,

  • Special Purpose ledger integration with COPA

    Dear all,
    Please help me to understand the config tasks for integration of Special Purpose ledger with COPA. Explain in detail what are different setting to be maintained.
    Thanks,
    Mary.

    Hi,
    now i am send it special purpose ledger configuration steps you can follow that your problem will be solued.
    Special purpose ledger
    Steps for cofig.
    - Define Table Group
    Financial Accounting -> Special Purpose Ledger -> Basic Settings -> Tables -> Definition -> Define Table Group (T.CODE:GCIN)
    - Maintain Field Movement
    T.CODE:GCF2
    IMG Menu Path :
    Financial Accounting -> Special Purpose Ledger -> Basic Settings -> Master Data -> Maintain Field Movements
    - Maintain Ledger for statutory ledger
    T.CODE:GCL2
    IMG Menu Path :
    Financial Accounting -> Special Purpose Ledger -> Basic Settings -> Master Data -> Maintain Ledgers -> Copy Ledger
    Assign  Co Code
    Assign Activities
    - Define Versions
    GCW1
    IMG Menu Path :
    Financial Accounting -> Special Purpose Ledger -> Periodic Processing -> Currency Translation -> Define Versions
    - Set Up Exchange Rate Type
    OC47
    IMG Menu Path :
    Financial Accounting -> Special Purpose Ledger ® Periodic Processing -> Currency Translation -> Set Up Exchange Rate Type
    - Create Number ranges
    GC04
    IMG Menu Path :
    Financial Accounting -> Special Purpose Ledger -> Actual Posting -> Number Ranges -> Maintain Local Number Ranges
    - Create Currency Translation document type
    GCBX
    IMG Menu Path :
    Financial Accounting -> Special Purpose Ledger -> Actual Posting -> Maintain Valid Document Type
    -     Create Posting period variant
    GCP1
    IMG Menu Path :
    Financial Accounting -> Special Purpose Ledger -> Actual Posting -> Posting Period -> Maintain Local Posting Period
    Don't forget abt reward points
    Regards
    gvr

  • Parallel Ledger Vs.  Special purpose Ledger

    HI All
    Can you please help me with the following.
    I am doing an analysis comparison between Parallel ledger and Special purpose ledger. specificaly to the following requirements.
    Month end currency translation by group account, company, trading partner, profit centre, partner profit centre, FI transaction type and FI segment with full audit trail; .
    Translation of certain accounts using a monthly average rate, others using a spot rate and some using an historical rate (the translation to group currency needs to be entered by account i.e. there is no one historical rate, the rate will depend on the account);
    Accounts translated at the monthly average need to be translated based on periodic movement and NOT the cumulative balance i.e. Cumulative at the end of period 3 = [(opening balance) + (movement for period 1 x monthly average for period 1) + (movement for period 2 x monthly average for period 2) + (movement for period 3 x monthly average for period 3)]. NOT: [(cumulative balance at the end of period 3 X monthly average for period 3)] which is incorrect;
    If possible (as is possible in BPC):
    For accounts translated at period end spot rate: separation of the currency translation movement  on the account balance into transaction types for:
    Currency translation difference on retranslation of the opening balance;
    Currency translation difference on the movement for the period.
    The ability to define different rates per account, transaction type combination (i.e. the balance on the depreciation transaction type of the fixed asset accumulated depreciation reconciliation account should be translated at an average rate while the account balance as a whole is translated to the period end spot u2013 the difference between the translation of the depreciation movement at average and spot rates should be posted to a separate transaction type as u201CCurrency translation differences on the movement for the periodu201D;
    Posting of the balance sheet balancing difference on the translation to a u201Ccurrency translation adjustment accountu201D in the balance sheet.

    I have some cost center qns
    How is cost center realted to profit center?
    What is a cost element group?
    What is a cost center group?
    What is the difference between Assesment & Distribution?
    What is a activity type?
    Award points if helpful

  • How many key fields can we maintained in dso or ods

    HI
    pls let me know how many key fields can we maintained in DSO or ODS.
    Thanks and Regards.
    ASIM.

    Hi,
    Key fields can only be 16 you cannot exceed this. but if you have more key fields, you can combine fields using a routine for a key field
    Max Data Fields - 749 data fields can be added in a DSO.
    Regards,
    Marasa.

  • Special Purpose Ledger to refrence original funding source on Goods Issue

    My client has a requirement to purchase stock materials using mutiple funding sources throughout the year (same material, company, plant, valuation area, etc.)
    We also have a requirement to update the Special Purpose Ledger upon Goods Issue/Stock Transfer with the source funding data.
    One method we tried is to do Batch Management of all materials, create the batch automatically at receipt, User Exit on Goods Issue to find the GI batch from the GR line item (MSEG) and use that funding data in FMDERIVE to populate the Special Purpose Ledger.
    The above process is a bit complex (especially after multiple transfers) and i was hoping someone has a better solution for this.
    Thanks in advance for any assistance you can provide.

    Hi, can you elaborate.
    'My client has a requirement to purchase stock materials using mutiple funding sources throughout the year'- you want to use different FM account assignments?
    'We also have a requirement to update the Special Purpose Ledger upon Goods Issue/Stock Transfer with the source funding data.'- what's the issue? If you put correspond fm account assignments then you can transfer them to SL.

  • Interview Questions for FI- General Ledger and Special Purpose Ledger

    Hi Experts,
    Can you guys provide me interview questions for
    1) FI-SPL (Special Purpose Ledger)
    2) FI-GL (General Ledger)
    3) COPA
    4) Cost Center Accounting
    Help in this regard is highly appreciated. If you have any Interview Questions documents, please email it to [email protected]
    Thanks
    Rajanikanth.

    I have some cost center qns
    How is cost center realted to profit center?
    What is a cost element group?
    What is a cost center group?
    What is the difference between Assesment & Distribution?
    What is a activity type?
    Award points if helpful

  • Payment method for Special General Ledger

    Dear Friends,
    Can anyone please explain me about the Payment method and Payment request difference.
    I got a two definitions in SAP liabiary
    Under head Payment method and bank determination:
    The payment program supports all payment methods including special G/L ledger account transactions (e.g payment with bill of exchange, down payment,u2026)
    and Under head Payment methods:
    The payment program for payment requests does not support payment methods portrayed via special general ledger transactions (e.g. bill of exchange, bill of exchange payment request).
    Please let me know why he mentioned that the special gl trans. are suported by one defination and other one is not supported.
    Please explain in simple english language.
    Thanks in advance,
    Mahendra Dev

    Dear Mahendra,
    There is a simple logic behind these two:
    Payment requests are not the real documents like payment dues. If there is any due then these are generated. So It says system does not consider the Payment requests for Spl GL transactions.
    Regards,
    Venkata Raju

  • New G/L Concept and Special purpose ledger

    Hi Gurus,
    What is the new G/L Concept ?
    What is the purpose of new G/Lconcept?
    And what is the special purpose ledger ?
    Please give me the proper answer for above questions,
    Regards,
    Baltha

    Hi Batha,
    General Ledger Accounting (FI-GL) (New) 
    The central task of G/L accounting is to provide a comprehensive picture of external accounting and accounts. Recording all business transactions (primary postings as well as settlements from internal accounting) in a software system that is fully integrated with all the other operational areas of a company ensures that the accounting data is always complete and accurate.
    Beyond fulfilling the legal requirements, General Ledger Accounting also fulfills other requirements for modern accounting:
    - Parallel Accounting
    General Ledger Accounting allows you to perform parallel accounting by managing several parallel ledgers for different accounting principles.
    - Integration of Legal and Management Reporting
    In General Ledger Accounting, you can perform internal management reporting in parallel with legal reporting. For this purpose, the Profit Center Accounting functions are integrated with General Ledger Accounting. Furthermore, you can generate financial statements for any dimension (such as profit center).
    - Segment Reporting
    General Ledger Accounting supports the segment reports required by the accounting principles IFRS (International Financial Reporting Standards) and US GAAP (Generally Accepted Accounting Principles). For this purpose, General Ledger Accounting contains the Segment dimension.
    - Cost of Sales Accounting
    You can perform cost of sales accounting in General Ledger Accounting. For this purpose, General Ledger Accounting contains the Functional Area dimension.
    Features
    General Ledger Accounting comprises the following functions for entering and evaluating posting data:
    - Choice between group level or company level
    - Automatic and simultaneous posting of all subledger items in the appropriate general ledger accounts (reconciliation accounts)
    - Simultaneous updating of the parallel general ledgers and of the cost accounting areas
    - Real-time evaluation of and reporting on current posting data, in the form of account displays, financial statements with different balance sheet versions, and additional analyses.
    In this way, General Ledger Accounting automatically serves as a complete record of all business transactions. It is the central and up-to-date component for reporting. Individual transactions can be checked at any time in real time by displaying the original documents, line items, and monthly debits and credits at various levels such as:
    - Account information
    - Journals
    - Totals/transaction figures
    - Balance sheet/profit and loss evaluations
    However, SAP still offers to choose between the New GL and the old Classic GL way of accounting.
    There are certain limitations in the new GL and clients are adopting to the new gl concept.
    and also check this link
    http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/FISL/FISL.pdf
    Regards,
    srinivas muthyala

  • New G/L vs. Special Purpose Ledger

    Dear Experts,
    I am looking for information regarding the pros and cons of New G/L compared vs. Special purpose ledger (FI-SL). We need to adopt either a special ledger or new non-leading ledger. What is the best approach.
    Thanks for reply.
    Regards René

    In special purpose ledger, you need to do a lot of config. manually (like field movement, ledger selection, etc.) which you do not need to in new GL.  At the same time, you lose some of the flexibility that you have in SPL, when you opt for new GL.  Given a choice, I would go for new GL.

  • Special Purpose Ledger Support

    Hello Financial Experts!
    Iu2019m current working on a project and would like to know more about the Special Purpose Ledgers that are used in the FI Component of SAP.
    What is the latest release of SAP Special Purpose Ledger and up until  till when will SAP be providing product/OSS support for special purpose ledger?
    Thank you very much experts, one and all! 
    Regards,
    Philips

    This issue has been resolved.
    In SPL last year balances have not been carry forwarded due to which there is a discrepancy btw FI and SPL.
    Thanks and regards
    Radhika Eluri

Maybe you are looking for

  • I accidentally upgrade Lightroom 4 Catalog

    Is there way to recover files from my backup of time machine, I lost everything in my catalog,collection, public services, settings  and also presents. Is there way to recover them can some one please help.

  • SSL certificate error when installing

    Hi, We are getting error when installing the SSL certificate on our web dispatcher. Please see screenshot attached. Kindly assist us on this. Thank you! Regards, AJ

  • Time based dial plan configuration

    Hello experts! We're trying to maximize security on our VOIP Gateway to avoid being victimized by long distance/international toll fraud. In efforts to address this concern, we're looking to somehow deploy a time based dial plan on our gateway (2821)

  • Need help with transparency and color quality in the forground

    I need to make an image that is comprised of a collage in the back with a clear visible logo on top. I'm not sure if I'll need to change the hue's of the background collage images to create the image or if theres a way to make the image somewhat see

  • AppleID email wrong and security questions not working...

    What can you do when you can't remember your applied password and when you click on iForgot Password  it takes you to where you can choose between to have the password sent to your email, and you can't choose that..., or ask you security questilons.