Currency key unknown

Hi
When i process the Inbound IDOCS from 51 status to post application document thorugh BD87 T Code : I am geetting an error message that Currency key is unknown .
The mesage number : Message no. S&044
The program running attempted to read the technical description of a view required for the authorization check.
This description does not exist in the system.
Procedure
Regenerate the view so that the technical description is regenerated.
Kindly help me on these . Since it is very critical efforts are highly appreacited .
Regards
Ravindrareddy .

please check the idoc for segments with error
seems that idoc contains invaild curency key, pls ask the EDI team to correct the same.
e,g in idoc currency USD was missplled as UDS etc.
Hope this helps
Pls assign points as way to say thanks

Similar Messages

Could not open key UNKNOWN

I am having a problem upgrading from iTunes 9.0.07 to 9.0.2. I've been trying to use the 64-bit installer and have tried disabling my anti-virus software.
I had this same problem when I was running Windows Vista Home Premium SP2 64-bit on this same computer.
At first, when I would download, I had to Download Only and then install.
When I tried to install iTunes manually, it would load very slowly at Copying Files and then say it was Rolling Back Action. After that, it would say that, "The installer encountered errors before iTunes could be configured."
I tried everything people suggested on help forums, the discussions here, and the Trouble installing iTunes or QuickTime for Windows help article in Support.
After uninstalling iTunes, making a backup of my iTunes music from Documents and getting rid of anything else iTunes, QuickTime or Apple related, I tried downloading again from the website (using Firefox). I had the problem that iTunes said it couldn't be downloaded without QuickTime. Okay, easy fix, right? I tried downloading and installing QuickTime and these errors came up:
Could not open key:
UNKNOWN\Components\69413F169B198734FA40BC8B73511DB0\108B43C0CEA676640B35306AE7D2 4051.
Verify that you have sufficient access to that key, or contact your support personnel.
and
Could not open key:
UNKNOWN\Components\9C4307835821FFF47864EE6DABC09AA9\EA2C92A1FBE18F42A12C111C5AAD DDA.
Verify that you have sufficient access to that key, or contact your support personnel.
So then I tried doing what jnd73 said in a different discussion: http://discussions.apple.com/thread.jspa?threadID=2151409&tstart=0&messageID=102 87668#10287668
And I found I couldn't do half of what jnd73 said. Either because it already knows I'm the admin, or because I don't have sufficient access to the key. I can't even get another admin user to download iTunes successfully. I don't know if it's a permissions issue.
The "The installer encountered errors before iTunes could be configured." problem started when I moved from Windows XP Home Edition SP3 32-bit to Windows Vista Home Premium SP1 (Had to update to SP2) 64-bit. I moved from a separate computer (Toshiba Satellite L35-S2151) to this one. I had to move all of my files from my last backup and re-download applications. I think what I did was I moved all of my old iTunes Program Files along with everything instead of just the iTunes folder in My Documents. So, when I downloaded the new iTunes, it didn't make new folders and used the old ones. I was able to make iTunes recognize all of the music I didn't buy through iTunes after I manually found the files, but iTunes never updated correctly.
I'd think now that I got rid of all of the old folders that now I'd be able to install without any problems.
Can anyone help?

I was having the same problem, but I found the solution to the problem.
First, click on Start and search "regedit" without the quotations. Open it up, click on "Edit: in the drop down menu. Next, click "Find" and search for your folder components, not the key component, which is in your case: 69413F169B198734FA40BC8B73511DB0
and
9C4307835821FFF47864EE6DABC09AA9
They should be folders, and inside the folders, there should be a key with the name of that 2nd key. Example, inside the 69413F169B198734FA40BC8B73511DB0 folder should be a key named 108B43C0CEA676640B35306AE7D24051, and the same for the other folder.
Now, to gain permissions for these keys, right-click on the folders, and select "Permissions". Where it says "Groups or User Names", click "Add". Then select "Advanced". Next, select "Find Now" and select the "Everyone" user. Click OK, then OK again, and you should be on the permissions window. For "Groups of User Names", select Everyone and select the "Full Control" check box for Everyone. Then click OK.
Do the same for the other folder. Be careful; for me, there was 3 folders with the same key name, and I repeated the steps above for all 3 in order to make it work. Just check the folders under your folder to see if it has the same name, and if it does, repeat the steps on that folder.
This method worked for me after trying a million different solutions. Hopefully, it works for you too. If it doesn't work, feel free to reply back. And if does work, please reply back, just so I know it did work.
Good luck =]

Unable to install itunes Win 7, 64 bit. Error: " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel.

Hi,
I'm not able to install itunes in my Win 7 , 64 bit. getting the below mentioned error.. any help would be greatly appriecated.
" Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel."

NCPlater to all haveing the error: ***I HAVE THE ANSWER***
iTunes
Could not open key:
UNKNOWN\Components\DA42BC83BF25F5BDOAF18C3B9B1A1EE8\3e43b73803c7c394f8a6b 2f0402e19c2. Verify that you have
sufficient access to that key. or contact your support personnel.
After following instructions for three different solutions that did NOT work; I found the solution that did work
on the support site for Syamntec.
Readers - Please, you must be VERY familiar with pc jargon and windows vernacular to accomplish the reset
of ALL the permissions in your registry.
Follow the ditrections below and pay attention to the notes for those running 64bit Win7.
Step one, back up the registry.
Step two, go to the MS KB: http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf -ed6985e3927b&displaylang=en and download the file that installs subinacl. It is an MSI file, and will do a quick install of a few Microsoft files. Hint: Look in the folder listed below, "subinacle.exe" may already be there.
Step three, create a batch file (subinacle.bat) with the following commands: (Use Notepad - copy & paste, not the red stuff)
cd /d "Program Files\Windows Resource Kits\Tools" (only for 32bit/x86 machines)
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%\*.* /grant=administrators=f /grant=system=f
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
For 64bit machines substitute for first line of bat file:
cd /d "c:\program files (x86)\windows resource kits\tools"
Step four, run the batch file. Let it run until the Command Prompt screen closes, may take 30 minutes or more.
Step five, reboot the machine and run the install again.
Ladies and Gentlemen; this worked for me and allowed immediate installation of two application packages I had been trying for three months! (Including ITunes 10.5)

Error 1402: Could not open key UNKNOWN\SliderCtrl.SlideCtrlProxy\CLSID

I have two users. User A wrote an application using LabVIEW 7.1, including an installer, and gave said application and installer to User B. User B has 8.0 and 8.1 LabVIEW RTE's installed properly. When trying to run the application installer, or just the 7.1 RTE installer alone, the following error occurs every time:
Error 1402. Could not open key:
UNKNOWN\SlideCtrl.SlideCtrlProxy\CLSID
I took the registry info from my machine (had 7.1 installed on it at one time; currently has 8.2 and 8.5), exported everything with "SlideCtrl" in it, imported those into User B's registry, double checked the permission in the appropriate places, re-ran ... same problem. Help?
Certified LabVIEW Developer
NI-VLM Administrator

I found the answer on my own, documenting for the next poor soul ... this was under WinXP
* Go into regedt32
* Right-click on HKCR and select "Permissions" -OR- Click on HKCR and choose Edit->Permissions
* Add the current user and set permissions for Full Control and Read.
It is NOT sufficient to give "Everyone" Full Control and Read, it needs that user id. Brilliant ... current user is not part of "Everyone".
Certified LabVIEW Developer
NI-VLM Administrator

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Any Orjinal SAP Reports which has currency field and currency key

Hi Friends,
I am looking for a report which has currency field and currency key at selection screen. I want to learn how SAP do selection with currency. Can you say a transaction deal with my desire?
Thanks.

try report RFSSLD00
A.

Currency Key Reference field in WebDynpro Table Column

Hi Experts,
I am using a WebDynpro table (not ALV) showing multiple currency fields in a single row - each one potentially referencing a different currency key e.g. Japanese Yen and USD in a single row.
My currency context attributes are already defined as currency types, but how can I assign different currency key references to each of my currency context attributes? Or is this somehow done as a property of the table column UI element?
Thanks for your help,
Peter

Hi Kris,
You answer is very helpful, but I do have a question about going the DDIC route. So you are saying that if I take a DDIC structure into my context with multiple currency keys as reference fields for multiple currency fields, then my WebDynpro context will know exactly which currency key is the reference for which currency field without having do do this programatically as you described? If that's true, can I bring a whole DDIC structure over to the context and then delete the 'Dictionary Structure' refrence from my context node, so that I can add my own additional fields to the context node? E.g. in the case of DDIC structure VBAP can I get all my currency fields and their reference fields from the DDIC from VBAP and then delete 'VBAP' as a 'Dictionary Structure' from my context node and add my own custom fields. The fields I would have brought in from VBAP still retain their type and everything after the deletion of 'VBAP' as a 'Dictionary Structure', so my question is will it also retain the node_info of what currency key goes with what field?
Please let me know if you happend to have done this before.
Thanks,
Peter

Currency key for amount of zero

I load an ODS and have an amount assoociated to 0currency. When the amount is zero, the currency key is not loaded into ods even though there is a key in source?

Check the update rules for the object as well as the start routine for any restriction on Zero amount.
Hope this helps.
Bhargava

Currency key in COPA document

Hi,
Do you know how the currency key entered in COPA document is found ?
The currency key should be equal to document currency.
For the operating concern view of the COPA document, my currency type is not equal to document currency but to company currency.
Thank you for help !

I might have misunderstood your question. In the summarization tables that are normally used for BW extraction there is no transaction currency available. You can have transaction currency only at line item level.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c38c24a0111d1894c0000e829fbbd/content.htm

About field HWAE2 Currency Key of Second Local Currency)

can anybody tell me that field HWAE2 ( Currency Key of Second Local Currency)
in which TRANS.TABLE...?????

it is in BKPF table
or go to se11, Select data element radiobutton
type HWAE2 click enter.
and check for where used list, it will give all the tables assosiated with HWAE2 field.
regds,
kiran

Currency key for Conversions using NODIM

Hello Experts,
I have question related to Currency key.
I have below mentioned scenario -
My Report output looks something like this
Doc No|Doc Value| 500 |USD |
so KF value and currency key(USD) are in seperate fields(column in Bex Report)
I seperated them by doing NODIM on KF and including the Currency key in Report.
The problem arise when I do currency conversion.
So on the initial Selection screen I gave user an option to run by different currency, so when he select lets say CAD.
The KF does get converted from USD to CAD but my currency key still remains a USD, whereas I would like to show that one based on what user entered on initial Selection screen(which would be CAD in this case).
I have searched forum for this but couldn't find proper solution.
Any guidance is appreciated. Thanks in advance.
Regards,
DNP

Hi friend
If you are working on UAE, the country grouping have to use is 99.
Check with your FI guy that he had assigned the currency AED to your company code. You can view this in table V_T001.
When you define the personel area, do give country as AE in table T500P
You can default your currency as per pays Scale type and Pay scale area in table V_T510F_B selecting country grouping 99.
I hope this will resolve your problem.
Regards
Santhosh.S

Message no. M8584 ''Enter a currency key'' in MIRO

Hi Gurus,
Infact I am facing a warning message while doing MIRO. Just after inputing MIRO header like Doc date, Posting date, Reference and lastly amount field when I press the enter, I get the above cited warning error. Can you please tell me how to remove this warning error message.
Thanks
BABA

HI,
It sounds like your system is operating according to design. System behaviour changed with note 982645.
The message always comes if you enter header data into miro BEFORE entering PO number and hitting ENTER. It comes even then if you enter header data and PO but press ENTER only afterwards! This is because the check of existence of currency key in the coding happens before the determination of the currency key from the PO. At the time the data are not determined from the PO, the system cannot know whether there will be a PO entry as in MIRO you can post also without a PO reference.
To eliminate the message is to enter the PO first then all other relevant data.
To get rid of this behaviour please implement SAP Note 1001420. This note just deletes new coding.
Please assign points if it useful.
Regards
Ravinagh Boni

Problem With Currency key

I have created a ZTABLE- having amount field and currency/qunatity field as WAERS and tcurc as reference table.
Created a structure where i created zwaers as field and currency and quantity fields as ZWAERS and my structure name as reference table--it worked
Now the problem is
When I loading into DSO- I have mapped amount to 0amount and Zwaers to 0currency- i also had the transforations for DSO and CUbe
When I tirgger DTP, I am unable to load the data
When I checked in the error stact " keyfigure <> 0 not allowd for unit" and my currency field is blank in the Cube.
I also tried in making the currency key as constant USD which didnt worked
Please help me out with this

hi,
Check the unit associated with the amount field, either it is bringing incorrect value or no value. If amount field is filled and no unit value is coming in the unit field it would give an error like yours. Assign constant to the unit field and then load.
regards,
Arvind,

Amount formatting based on Currency Key

Hi,
I want to format the amount field on the basis of the currency key.
for eg.
Chile has the no of decimal places set as 0
so for Chile, the amount 800.00 should display as 800
Similarly for Mexico, the no of decimal places is set as 2.
so for Mexico, the amount 800.00 should display as 800.00.
I am using the follwoing statement
WRITE im_amount TO v_amount
                    CURRENCY im_waers
                    DECIMALS v_dec_places.
where v_amount is type char20 and im_amount is type netwr.
This is working correctly for Mexico but fails for Chile.
Please share your comments on this.
Thanks in Advance,
Binu

The following write statement gives the perfect result.
WRITE v_amount TO v_fmt_amt
                 decimals v_dec_places
                 no-grouping
                 left-justified.
I was not getting the result on using both the currency as well as Decimals addition. The desired result is obtained on only using the Decimals addition.
And I used the FM, 'G_DECIMAL_PLACES_GET' to get the decimals for the respective currency key.
Thanks a lot for your response.
Regards
Binu

Error 1402.could not open key:UNKNOWN\MPAPI.WAPCON...

im getting this error message when i install pc suite v6.82 on windows XP. any ideas
error 1402.could not open key:UNKNOWN\MPAPI.WAPCONNServerMP.4\CLSID. Verify that you have sufficient access to that key, or contact support personel....
thanks in adv..

It sounds that there is some permission problems in your register.
Anyway, if you ignore that error message, does installation continue?

Currency key unknown

Similar Messages

Maybe you are looking for