Currency setting in multiple company code.
Dear all,
we are having 3 company codes in one client.
and we have to set the Currency setting for multiple company codes.
Tcodes
S_BCE_68000174 - Enter Translation Rates
S_ALR_87003642 - Open and Close Posting Periods
it is not allowing us to set the values at a same time for different company codes by different users
it says " DATA LOCKED BY OTHER USER, ONLY DISPLAY MODE."
Pls assist
Thanks
Ask for access to delete lock entries. If access is provided, use T code sm12 to delete the lock entries.
@ Irfan you cannot do that. Only one user can use a table at a time.
It is like using an ATM. Only one person can withdraw money at a time.
Edited by: Dummy_Variable on Jul 27, 2011 9:34 AM
Similar Messages
-
Report sould support multiple company codes and currencies
Hi Experts,
I had requirement, my report should support multiple company codes and currencies. Right now it is supporting 2 company codes and currencies(EUR, USD) only. Now the report should support all copmany codes and currencies.
I had analyzed report. In the report there are class and authorization objects. In this authorization objects, they may be any chances of maintaining company codes and currencies? This is regarding PS Module.
Need ur suugestions to solve this issue...
Regards,
K. BharatHi raja,
Could you share what you had to do to attain this functionality? I have the same requirement.
Thanks,
Kiran -
Can we assign 1 credit control for multiple company codes
hi,
sap gurus,
good afternoon to all
can we assign 1 credit control area for multiple company codes.
if yes can any body explain the pro's and cons of the assignment.
if no can any body explain the why?
its urgent plz.......
regards,
balaji.t
09990019711Yes Balaji,
We can assign.
Here the risk categiry and terms of one credit control area will be applicable to all company code.
Credit Control Area
Definition
An organizational unit that represents the area where customer credit is awarded and monitored.
This organizational unit can either be a single or several company codes, if credit control is
performed across several company codes. One credit control area contains credit control
information for each customer.
Use
Credit and risk management takes place in the credit control area. According to your corporate
requirements, you can implement credit management that is centralized, decentralized, or
somewhere in between.
For example, if your credit management is centralized, you can define one credit control
area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you
can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level.
You set up credit control areas and other data related to credit management in Customizing for
Financial Accounting. For more information, see the Implementation Guide under Enterprise
Structure Definition or Assignment Financial Accounting and then Maintain credit control
area. You assign customers to specific credit control areas and specify the appropriate credit
limits in the customer master record.
Thanks,
Raja -
One Credit Control Area - Multiple Company Codes - Credit Management
Hi All,
my client has a requirement to go for one common control area & with different company codes.
suppose if i have a customer in multiple company codes & i desire to have the credit control happening for individual company codes, is this possible???
can i use the individual limit field extensively for credit limit per individual company codes???
please pour your thoughts, i have a subsequent question too.
regards
ilangoin this case how can i have the FD32 screen differentiated for different company codes?
say for an european company code, i will have the document currency EUR & for the same customer in US, i will have it as USD.
can i have this segregated?
sorry, too many questions in single thread, but i dont want this to be tracked in different threads, Hope the moderator agrees too.
regards
ilango -
Which of the following is required for multiple Company Codes assigned to s
Which of the following is required for multiple Company Codes assigned to same Company ?
Same Chart of Accounts
Same Currency
Same Fiscal Yearhi,
if multiple companies are dependent on each other then you have to follow the below as same for all companies.
Same CoA
Same ItemMaster Data
Same WareHouses
Same BP Master Data
Same Currency
same fiscal year
and few more master datas which ever necessary.
if they are independant on each other then no need to maintain the same codes.
regards,
varma -
One lockbox for multiple company codes
Is it possible to have one lockbox for multiple company codes?
No, I don't think so. Lockbox is 1:1 for a Company Code.
You configure Lockbox for a Company Code.
You can use one of the 2 available Lockbox user exits (not sure which) to write a piece of code that searches invoices against the customer posted to different company codes. You will have to have the intercompany setups.
You may find an OSS notes for intercompany clearing.
Hope this helps! -
One Bank account for Multiple company codes
Hello, Is it posible to have one Bank account assigned to mulitiple company codes ??
isn't it be a problem when we do BAI reconciliation.
Becuase all we get from bank is bank account number and transactions, and how reconciliation works in this situation if we had mulitiple company codes assigned to same bank account number.
Can you please suggest me, if this is possible at all.(assigned to mulitiple company codes).
Thankyou.Hi. For bank statement configuration you can only assign one bank account to one company code as mentioned by Akhil. The scenario you've described above is a pay-on-behalf process. If your payments are through AP, you create the bank account in the true legal entity and then when you configure the Company Codes (x,y, and z) in F110 payment program, then you set the Paying Company Code to be entity A. You don't need to configure the bank account in company codes x, y and z. When you run the AP payments, the system will know to check company A for the banking details. You will also be establishing an intercompany relationship with this so you would need OBYA setup as well. However, if you are trying to process payment requests, I do not think that the program adheres to this piece of config. It'll try to find the bank account in the respective company code's config. So sometimes in-house cash is implemented to this. hope that helps a bit.
-
One lockbox for multiple company code
Hi Guru's.
Currently we have one company code to many lockbox configured, process
is working fine.
We are in process of merging two companies.
We have a scenario were we have one Lockbox shared between multiple
company code, when we process the lockbox file lockbox process will
clear one company code Invoice and other Invoice for different company
code are unprocessed.
We have looked in to user exit EXIT_RFEBLB20_001 and EXIT_RFEBLB20_002,
was not much of help.
Regards,
KJI had this scenario few years back in a company and we used exit RFEBLB20_002. We used logic to find the invoicing company code from the BSID table using the document number from lockbox file, then change the default lockbox company code to invoicing company code. Unfortunately this scenario will work only if you use unique document number ranges for each company codes which is not the case for most companies.
Edited by: PaulKr on Sep 26, 2011 9:08 PM -
Entry Channel setup for multiple company codes
Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep -
F.01 - Trial balance for multiple company codes
Hello SAP gurus,
I am trying to use transaction F.01 to generate trial balance for multiple company codes. My ideal output is as follow:
Company Code GL account Amount
AAAA 10000 200,000
AAAA 10001 100,000
BBBB 10000 500,000
BBBB 10001 300,000
However, when I tried to run the report in ALV format, the report aggregate the total by GL accounts which is not what I want (see below).
Company Code GL account Amount
'**** 10000 700,000
'**** 10001 400,000
Do you know if it is possible to generate a trial balance broken down by company code and GL accounts in ALV format? If yes, how do I do that?
Thanks,
Cassandra WongIn the initial screen of F.01, if you select radio button 'ALV grid control' and select the layout as '1SAP' and execute, you will see the button Expand (Ctrl+F2) in the report - it is adjacent to the blue information button - you will see a + sign and the words 'Company Code' on that button. Even if you are not able to locate the button, just press CtrlF2 on your keyboard, the list will expand. You may not have company code in the layout - you can change it using the 'Change Layout (CtrlF8)' button and then by bringing 'Company Code' field from the Hidden Columns on the right to the Displayed Columns on the left.
-
Vendor Master with Multiple Bank account in Multiple Company Codes
Dear Team,
We have multiple companies in our SAP environment, wherein a single vendor is extended to multiple Company Codes (Cocds). If we change the bank account in the vendor master, it is applicable to all the Cocds in which vendor is extended. Few vendors want payment in different bank accounts.
How do we address this issue?
Kindly guide.
Regards
JamesHi,
Two options without any enhancement:-
1. Use "Partner Bank Type" in Vendor Master's Payment Transaction View where you maintain vendor bank account. Each of the bank account should be assigned to unique Partner Bank Type
- Based on this setup, at time of invoice posting, user could choose which vendor bank type and base on the selection, the selected bank will be selected upon payment.
- You could also explore the option of using substitution to substitute the partner bank type upon posting if the same cocd always using the same vendor bank
2. A much simpler option, upon payment proposal - user actually could select which vendor bank they wanted to use if you've multiple vendor in the vendor master.
Thanks,
Ong Yang -
Vendor Master Creation through IDoc with Multiple Company Codes
I am trying to create vendor masters sent from a 3rd party into SAP using CREMAS05 IDoc. I have the requirement that the vendor should be created in each of 3 company codes and the vendor number is internally assigned in SAP.
I create my IDoc with the general data E1LFA1M and multiple E1LFB1M & E1LFB5M Children. When I post the IDoc using IDOC_INPUT_CREMAS which uses Call Transaction, the vendor gets created for the first company code, but the IDoc errors on the vendor extension XK01 for the next company code with the error: "Fill all required fields SAPMF02K 0111 ADDR1_DATA-NAME1".
In debugging through this, it appears that the vendor number that gets created in the first XK01 transaction does not get passed into the data for the second XK01 call and SAP tries to create a new vendor instead of extending the newly created one.
If I force the value in during debug after the initial call transaction into the variable h_lifnr, it works fine (Vendor created with multiple company codes.
Any help would be greatly appreciated.
-LarryI cannot give you exact solution, but can guess why this is happening, below is what I believe.
I think Synchronous update is not happening in call transaction, second transaction is getting processed before the first one is saved, debugging it works fine, because we give system enough time to save while processing.
Generally in call transaction we have MODE, if we pass S - then synchronous update happens, in your case, you need to find the way to incorporate this.
Hope it helps.
Regards,
Ravi Kishore. -
SEPA file – how to create one file for multiple company codes
Dear experts,
My company has multiple company codes and they process automatic payments (F110) for multiple company codes in the same run.
The company wants to generate one SEPA file for all company codes.
In OBPM1 for SEPA format in the section ``Payment medium output devided by level of detail`` I unchecked everything (attached).
OBPM4 for SEPA format is showing `` No separation of payment medium output``.
Unfortunately, when I run automatic payments (F110) for multiple codes, multiple files for each company code are created.
Can anyone let me know how it is possible to create one SEPA file that will contain payments for multiple company codes?
Thank youHi Zara,
Please check in transaction DMEE your format tree (eg. SEPA_CT), 'DMEE tree: properties' - tab 'Sort/key field'. Is the Sort/key field 'ZBUKR' defined there with Level 1?
Please follow the recommendation of note http://service.sap.com/sap/support/notes/1742584
Regards,
Emöke -
Impact of Merging multiple company codes into ONE
Hi,
We are currently doing a study for a client, they have the following scenario where the client has got multiple company codes in SAP (due to some tax benefits they had initially created the company codes) now the tax benefits cease to exist and they are planning to consolidate/merge all the company codes into one legal entity. In the existing landscape all the company codes are in the same client. They are proposing to merge all the company codes into an existing company code.
Trying to understand the impact of merging on SD and would appreciate your thiughts/insights into what could be the important critical impacts of merging and what are the factors to watch out for from an SD perspective. Client has VC and MTO scenarios.
Thanks in Advance.
MHi,
It all depends on your strategy. Will you be creating a new Sales organisations? or continue with the existing one? Also, please check with the client as to how the existing plants in the subsidery company be treated in the holding company.
You will have to check the master data, open items, Z programmes & most importantly CIN related settings.
Hope this is helpful, please let me know if you require further inputs.
Thanks. -
Contract for multiple company codes
Hi,
The requirement is to process the Sales Contract for multiple company codes, the concern is
while creating the Contract document in VA41 we get the Sales area as mandatory.
How to achieve this? if we suppress or make it as optional with some kind of ABAP customisation (what it should it be? usereixt/VOFM routines or what?) would it solve the problem ? if yes ,what would be the impacts on the other transactions.
Kindly suggest.
Regards
SRHi
If it is a customer contract (SD contracts) then it is not possible to create the document without specifying the sales area. In the overview screen, even if the sales area is not specified, it takes the value from the 'Sold To' customer master record. If the SP exists in multiple sales areas, then the system displays the different sales areas in a popup and we have to select the appropriate one. To my knowledge, even if you manage to create the contract without those details, you cannot refer them for creating the release orders.
Thanks,
Ravi
Maybe you are looking for
-
The list of blocked sites is empty.
Have used Firefox for years. There should be a healthy list of blocked sites (exceptions to cookies). Privacy: always use private browsing mode - ticked Accept cookies from sites - ticked Accept third party cookies - always Exceptions - shows as blan
-
Lesson for iTunes 7 owners Downgraded to iTunes 7 today, after two years of fine service and enjoyment. The Itunes 7 installation resulted in my PC losing access to its CD/DVD-RW drive. OK, I restored that easily enough. But even worse, iTunes 7 itse
-
Will the mini run on a Mac desktop
Just thinking it would be useful to have a second computer that can run thru my Mac desktop if it is possible-and use the screen.
-
PDV and SAP Query - personalization
Hi, Is it possible to change default personalization settings via properties, e.g. via "Property keeping user settings" and use them as defaults for the iview for all users? Best regards, Beata
-
Hi I have created an application through which we need to update the DB table. How to capture the current ALV data into an Internal Table. Regards, Surya