Currency USD does not match currency type 30.

Hi,
All Experts.
I am configuring Controlling Area, However I am quite new to CO. I am having 11 company codes and using one Controlling area as CA00. Out of 11 Company codes 10 are from US and one from Canada. So they have USD & CAD respective currencies.
Now while configuring CO area I am keeping 20 as currency type which co area currency. And I am trying to chnage it to 30 as Group Currency.
Currecncy taken in CO area is USD.
Additional Information :-
1 ) I have not defined currencies in OB22 currencies for leading ledger. Am I missing there ?
2 ) Should I maintained additional currenecies for respective company codes as a US Cmpany codes additional currency as CAD & canadian company code additional currency as a USD. Is it the logic ?
So I am getting this error.
Currency USD does not match currency type 30.
Message no. KT300
Diagnosis
Currency was calculated for currency type 30. The currency in controlling area CA00, however, is USD.
Procedure
Change the currency in controlling area CA00 to, or choose another currency type.
If any one has gone through such error please focus on this.
Regards,
Sharvari Joshi.

SELF Solved.
Regards,
Sharvari Joshi.
Edited by: Sharvari Joshi on Aug 12, 2010 10:44 AM

Similar Messages

Object does not match target type when raising an event from c# to VB6

I have a c# .net DLL that I use from a VB6 app. It exposes an event,
and the VB6 app is sinking it.
The VB6 app is receiving the event, as long as it is raised from the
main thread of the .net DLL.
I have an aync task being handled inside the DLL (delegate BeginInvoke). Any
attempt to raise the event from within that thread casuses the reported
error, even from within the AsyncCallback function, when the thread is ending.
I noticed that the delegate for the event is not declared inside the
interface. It's in that module, but above the interface definition:
    [ComVisible(false)]
    public delegate void LoggingEventHandler( string logData );
The event is declared in the class itself as:
    public class Processor : _Processor
        public event LoggingEventHandler        LogNotification;
Finally, to raise the event:
if ( this.Completed != null )
    this.Completed( true );
If I open the tlb with OLEVIEW, I can see the public event just fine. Of course, I expected to, as it's working up until the helper thread kicks in.
Now for the REAL WIERD PART! This DOES work on several servers that have
been in production for months. It's just this one server that it won't work
on. Same code. Resinstalled/registered it 1,000 times. It took me a while to
find that an error was even occuring, since it was being raised in the
seperate thread. In other words, I'm receiving the event just fine on a series of servers. This is a new machine we're trying to bring online. I suspect it's environmental, but I can't figure it out.
I don't understand why the publisher would be expecting a certain type of
subscriber in the first place... unless the error is really triggered by the client when the event reaches it. I've put logging into the client, though, and the first line of code inside the event is not being executed.
For the VB6 app, I reference the tlb file that is automatically created when
I compile (Interop is checked). I unregistered and re-registered the tlb on
the server. I regasm'd the dll itself. All dlls are in the same folder - not
in the GAC.
The stack trace is as follows:
   at System.RuntimeType.InvokeDispMethod(String name, BindingFlags
invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32
culture, String[] namedParameters)
   at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr,
Binder binder, Object target, Object[] args, ParameterModifier[] modifiers,
CultureInfo culture, String[] namedParameters)
   at System.RuntimeType.ForwardCallToInvokeMember(String memberName,
BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData&
msgData)
   at HPFS.Queue.IProcessorEvents.LogNotification(String logData))

This is driving me nuts!
I sure would appreciate any suggestions.
I got this working on one of the two machines. The other machine had some other issues, so I had it re-imaged. It's been so long since I fixed the first one, that I can't remember exactly how I did it. Plus, I did so many things to it over two weeks, that I never really felt confident, anyway. But ... I could *swear* that the last thing I did back then to get this event to flow was to re-register the DLL's TLB.
So ... This is win 2k with FW 1.1 + SP1.
Completed is the delagate I'm trying to invoke.
this.Completed.Target.GetType().Name = "__comobject"
I've tried everything. Unregistered the .tlb. Unregistered the .net DLL. Verified that the app completely failed while unregistered. Created the TLB using RegAsm /tlb syntax.
I tried using CLR SPY. It registers nothing. It only lets me pick an EXE. This is a DLL tring to raise to an EXE.
I've looked at the TLB in OLE VIEW and I just don't know what I'm looking at.
Is there any other tool or technique I can use to audit/monitor/trap this? .net is giving me *** for details about what's failing. I wish I could somehow debug into exactly what it's trying to do and get more details on the failure.
Here's the error I'm getting:
(Code -1) Object does not match target type.<Source:mscorlib>(Stack:    at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters)
   at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParameters)
   at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
   at HPFS.Queue.IProcessorEvents.Completed(Boolean success)
   at HPFS.Queue.Processor.RequestDone())
Processor = the DLL I'm trying to raise the event from.
IProcessor = the event interface that's exposed through COM.

Received unexpected message type does not match expected type

1.Two Biztalk Applications A,B one for sending the request(A) and other application will send the response to A.
2.I have two schema Request and Response in Aplication A which i have exposed as webservice.
3. Application B share the same response schema .
I am using WSBasicHTTP sysnchronous ports to send and receive the message.
WHen Application B send the response , i get the error "unexpected message type does not match expected type "
but i dont know why i get such error when the schemas are share by both application. Please advice
Regards
Suresh

Hi Suresh,
Whenever you are doing request-response like calling web service etc, i would suggest to use Passthrough pipeline while sending and use XML receive for receiving the message.
Because when you are sending the message out it doesn't needs any promoted properties so you can use Passthrough this will avoid extra Assembling/Validation etc tasks performed by XMLSend pipeline.
But when you are receiving response that time it expects MessageType property to be promoted because normally you will have receive shape configured to some Typed Schema. So you will have to use XML Receive pipeline.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

-i386 does not match CPU type

Hi,
I was using Xcode and linking frameworks to it. In Parallel i was trying to install petsc and tried this command on terminal. the command did not work and gave me some error.
sudo python ./config/configure.py --with-blas-lapack-lib="-framework vecLib" --with-mpi-dir=/usr/local/mpich/mpich-1.2.6 --with-cc=gcc --with-cxx=g++ --with-fc=g77
Now I am getting following error in Xcode whenever i try to link a Framework to it. Earlier it was working fine.
/Developer/SDKs/MacOSX10.3.9.sdk/System/Library/Frameworks/OpenGL.framework/Open GL cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded)
Thanks a lot for your help.
-Ila

I am Linking it to a project of type c++ tools. Thanks.

E301 Symbol type in value file does not match symbol type in layout

Hello Experts,
Please help me. I am getting this kind of error when I am trying to open a report in cg02 using Report From Template option.
Regards
Dheeraj

Dear Dheeraj
Regarding:I am facing this problem only with one specification. For the other specifications I am able to open the report properly from Report from Template option.
Please compare data from one spec to the other. One spec does have more data. This "more" data yield to the result that a different WWI code is used and this WWI code is not "ok" and therefore you get problems.
Regarding; "Maitain Parameter Values" => try to skip or write "hello world" or whatebver; parameter values are needed later; only on "rare" cases they have impact on the e.g. report from template creation so taht you get a problem
Regarding:
I tried creating the report but the report is not created.The status of the report is Error. i went to information tab and clicked on F6 Parameter Values. System has thrown a message saying "No Parameter Symbols found in the template". But system is trying to pass the parameter values. I think because of this I am getting error..
Either you have used the wrong symbol type or used wrong function module to assign it to a own developped report symbol. etc. Please check; what was the last change either in WWI code or in report symbol definition.
Some thread have shown that sometimes the report symbol is prepared as report type "01" but should be "02" (or the other way around). This is one reason for such issues
Only by doing it step by step and checking:
a.) what has been changed in template?
b.) what is the difference in data on sepc 1 in comparison to spec 2
You will succeed. Sorry to say: to debug WWI is not as simple as ABAP code. This is one reason why some developpers might get "frustrated" in WWI;
May be check: WWI for Beginners
as well
C.B.

KG843 Currency type does not match plan version

Dear all,
we try to set up a CO-PA-planning in company code currency CZK / our operating corncern-currency is EUR - in the operatin concern we have maintained currency EUR and we have set the flag "Company-code currency" (TA KEA0).
As actual/plan-Version we use Version 0 with the following settings for operation concern: Currency type B0 (Operating Concern currency).
Now we try to plan our CO-PA characteristics and value fields with TA KEPM. Therefore we have created a planning layout. Here we receive the error message: KG843 Currency type does not match plan versionThe planning layout (TA KE15) is set up like this:
1. By creation of the layout we selected "Operating concern currency / Company code currency" because we would like to plan in CC-Currency
2. In the General data selection I have selected currency type = 10 = Company code currence because we would like to plan in CC-Currency
3. In the value field I selected Plan/Act. Indicator = 1 = Planning data and Version = 0
Do you know why I receive message KG843 - or what can I do so that I am able to plan with currency type 10 and version 0?
Thanks for a soon feedback.
Best regards,
XmchX

Ok, here's what SAP help has to say about multiple currencies in COPA planning:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/7a/4c3d494a0111d1894c0000e829fbbd/frameset.htm
Basically it says you have to define one version for OC currency and one version to use CC currency. Then plan in one version and copy to the other. Currency conversion will happen when copying.
REgards
Nikolas

Account currency200114 does not match document currency(1)

Hi
While adding A/P invoice i receive error:
Account currency200114 does not match document currency(1)
my bp currency is in USD and local is INR
Plz solve it.

Found.Thanks.
Edited by: Malhotra Saurabh on Jul 30, 2009 11:28 AM

Account currency does not match document currency

Hi,
We are using SAP Business ONE 2005 A PL 50. After having created an invoice in USD for an export customer, the payment is made in the local currency amount. When trying to do the incoming payment in the local currency we get Sap error message 173-66 " ACCOUNT CURRENCY DOES NOT MATCH THE DOCUMENT CURRENCY". Is there a way we can do the incoming payment in local currency?
Thanks,
Monil

Hiii Monilshah
Please check this link for your settings
https://websmp101.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000610242007E
thanks
Rizz

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

Message no. F5350 account type/account for invoice reference does not match

Hi SD Experts
Getting error message when the Billing document is released to accounting.
"Message no. F5350 account type/account for invoice reference does not match item"
Client is having 6.0 version , I have checked OSS notes, only available for upto 4.7 version.
Please help to solve this issue.
Thanks/karthik

have you checked which account type is maintained in respective G/L account which supposed to be hit once invoice is released . eg: check in Reconcilation account assigned in Customer Master in FS00, Reconcillation account for accoun type should be - D= Customers.
similarly for other accounts such as "Revenue account" & check Field status group assigned in G/L account in FS00.
Check & revert

Sharepoint error - Search Issue - The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).

i see this error everywhere - In ULS logs, on site. On the site > Site settings > search keywords; I see this -
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
I am facing issues in searching, my managed metadata service is not running, search results page throws internal error. Any Idea why this above error comes.
P.S: We use windows authentication in our environment.

Hi IMSunny,
It seems you have solved this issue based on your another post.
http://social.technet.microsoft.com/Forums/en-US/aa468ab0-1242-4ba8-97ea-1a3eb0c525c0/search-results-page-throws-internal-server-error?forum=sharepointgeneralprevious
Thanks
Daniel Yang
TechNet Community Support

Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
   WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
Thanks

Hi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
    <serviceDebug
      includeExceptionDetailInFaults="true"
/>
    <serviceMetadata
      httpGetEnabled="true"
      httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

WCF returning "The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8)"

I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
Does anyone have any suggestions on how to solve this probelm?
Here is the error:
The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>500 - Internal server error.</title>
<style type="text/css">

I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
Hi,
I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
{"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
I do have windows Activation Features installed and I am using .Net Framework 4.
Thanks
Sofia Khatoon

Output map: Document Type does not match any of the given schemas

On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema. But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
the message pertaining to the map out put we get an error:
The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
Is there a way to avoid having to have the reference?

Hi ,
In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
funtiod from source t destination(in your case any type schema created).
Thanks
Abhishek

Currency USD does not match currency type 30.

Similar Messages

Maybe you are looking for