Current 13 inch keyboard layout is it the same as the  current MacBook Pro

Iv'e been looking at a refurb 13 inch Air and noticed the enter key is the same as the current MacBook pro. Is this the current layout or the old style
Thanks

Welcome to the Apple Support Communities
I think you are referring to the Late 2008 Aluminum MacBook. It's an Unibody computer, and this MacBook has got a non-replaceable battery. You have to take the computer to an Apple Store or reseller to get your battery replaced.
The steps of the link you gave are for non-Unibody MacBooks Pro, that have got a replaceable battery. In this case, you have to buy the battery from the Apple Online Store

Similar Messages

  • I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
    Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

  • Anyone with the same problem? My macbook pro is freezing on start up and I get the follin

    My macbook pro is freezing on startup lately! It is wierd because I think the computer is still working, I can turn the volume up and down, and change the light in the keyboard and so on... But it still doesnt work.. I took a photo with my iphone? My macbook is kindda old I think it is from 2007. 2,4 ghz, Intel Core 2 Duo, 2gb mhz DDR2 SDRAM
    I have installed version 10.6.8 on it..
    Hope someone can help!

    Did you ever figure this out?  I'm having the same problem now... I have a 2008 macbook pro, running mountain lino and it's been doing this.. I tried booking in safe mode and got the same result.  Single-user mode didn't even run, and it just kept starting and shutting down without the screen turning on.  Really weird.
    Anyways, if you found a solution I'd appreciate it if you could let me know.  Thanks

  • Key board viewer for the font tamil 99 is not the same for iPad and macbook pro, why?

    I have ipad 2 and macbook pro purchased in the year 2014.  The character viewer for both iPad and mac book is different causing difficulties while typing.  Is this issue can be resolved?

    If you created your book with iBooks Author, such books can only be read on an iPad or on a Mac running Mavericks or later.
    If you want your book to be available on the iPhone, you have to create it in .epub format.  The Apple app for that is Pages.

  • Why can't i have the same playlists on my MacBook Pro, iPhone and iPod Touch?? Won't sync as I have them on my computer.

    I have a lot of Smart Playlists on iTunes and when I sync my devices the playlists names match, but the content doesn't. Each device has different songs inside the playlists. Not even the number of songs match in most of the playlists. What's the problem??

    The most likely reason for that error is that your hard drive is corrupt and thus the download is not getting expanded properly.  Restart the computer and hold down command-R as soon as you hear the chime, which will cause your computer to boot into recovery mode.  Once there, open Disk Utility and repair the hard drive.  If it succeeds, restart normally and try updating again.  If it can't repair, you can try a utility like DiskWarrior, but if the damage is that bad the system may be damaged, so you should consider erasing the hard drive and reinstalling everything from scratch.

  • Is the new iMac keyboard (small) the same as the one in the new 15" MBP?

    Hi, I have an easy question but I couldn't find any information on the Internet. I just bought a 24" iMac and I was willing to buy a skin for the keyboard (I already have an iSkin for my 15" 2008 MacBook Pro and is great). When I opened the box I had the surprise of a smaller keyboard (without the number keypad). So the skin that I was looking to buy for the imac keyboard did not fit in the new one. My question is, if the iMac keyboard is the same as the one in the new 15" MacBook Pro. I ask this because I can't find a skin for the new small imac keyboard and if it is the same as the MacBook Pro I can buy the skin for that keyboard. But before wasting my money I wanted to be sure they are the same.
    Thank you very much in advance

    That's no news, although it there are other things apart from the layout that could make them different: the spaces between keys and the format of the keys are also important. As I don't have an new MBP I was wondering if someone could tell me if the keyboard of the imac and the one of the MBP are the same.

  • My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).  The key behaves the same for the laptop keyboard and for an external Apple keyboard?  This just started in last week after 6 months of use

    My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). 
    The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard. 
    This just started in last week after 6 months of use.  The right shift key and other keys on the keyboard all appear to work correctly.
    Suggestions greatly appreciated.

    I have a solution to this issue now after a discussion with Apple Support.  Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences.  Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
    A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key).  I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility.  The SSD appears to be running better as a result as well.
    Hope that this is of use to someone else in the future.

  • How to use at the same time the audio sounds of a keyboard & the midi sounds with mainstage

    Hello! hope you can shed some light on my problem! I want to be able to use at the same time the real sounds of korg sv-1(stage keyboard, but it could be any stage piano with USB midi) and use other sounds from mainstage. Of course i switch between patches and sets with a footpedal so i can be quick with my changes of sounds so I try to keep my hands on the keys.
    My question is: Is there a way that one moment for example i have a silend patch (from mainstage) and the real sound i want passing through audio and the next moment silence from korg and the next patch a sound from mainstage? Or even combine them. I mean in general how am I able to integrate the sounds I prepared and organised in patches in mainstage with the beautiful piano & rhode sounds of my sv-1?
    thanx in advance for your response!

    Yes. To have a silent Mainstage patch, simply do not create any instrument channel strips. To have the SV-1 silent on a patch you should be able to set and save the volume for that patch to 0. As an alternative you could turn local off on the SV-1( this function will reset to local on after the SV-1 has been turned off). With local off you can determine with each Mainstage patch whether or not you want to transmit MIDI to the external instrument(SV-1) channel strip. If you have local on, be careful not to create a MIDI feedback/loop with the SV-1. This is a lot of info to digest at once, so take it slowly, step by step. Snapshots below are somewhat in order.
    Click on the cog wheel in the upper right corner of the channel strips section to get to this menu. Select add external instrument channel strip.
    The external channel instrument strip will look like this.
    Click on the MIDI output box to show the display below and choose your external keyboard destination(SV-1).
    In the channel strip inspector you can send patch changes to the SV-1.
    Here is where you select the MIDI input for routing MIDI to the SV-1. If want no SV-1 sound for this Mainstage patch, select none.
    You'll need to play with these parameters to get the desired results. Stepping through the MS patches with a footswitch can be done, too, but that can wait for now. Post another question when you master these steps.

  • Not really a problem just would like to know if I install firefox 4 beta...will I lose my bookmarks already in my current firefox browers and is that the same for the farmville game bar from facebook

    Not really a problem just would like to know if I install firefox 4 beta...will I lose my bookmarks already in my current firefox browers and is that the same for the farmville game bar from facebook

    It should not be a problem, as long as you are careful. Note the delete settings option when uninstalling firefox will delete bookmarks etc for ALL installed versions of firefox.
    Firefox attempts to retain the profile information, that include bookmarks etc when updating. It may still be prudent to consider other backup methods not entirely dependent on firefox.
    The firefox 4 beta will install by default in a slightly different location, you are then able to run either the current or the beta version of firefox. It is recommended you set up a new profile for the new version of firefox. see
    * [[managing profiles]]
    *[http://kb.mozillazine.org/Testing_pre-release_versions]

  • When i try and open a tab that is the same as the page im currently on i closes it self. not when i type the full address, but when i use the arrow keys to select the url and press enter

    when I try and open a tab that is the same as the page I'm currently on it closes it self. Not when I type the full address, but when I use the arrow keys to select the url and press enter. I just don't like typing in the same address 5 times, when the older Firefox worked.

    Hi
    AutoPunch enabled? Command click in the bottom half of the Bar Ruler to turn it off
    CCT

  • How can I make Adobe Acrobat Pro give a warning to another person who is trying to open the same file I currently have open?

    How can I make Adobe Acrobat Pro give a warning to another person who is trying to open the same file I currently have open?

    You can't.

  • Does the 13-inch: 2.5 GHz 2.5GHz dual-core Intel Core i5 Turbo Boost up to 3.1GHz internet speed the same as the 13-inch: 2.9 GHz 2.9GHz dual-core Intel Core i7 Turbo Boost up to 3.6GHz

    does the 13-inch: 2.5 GHz 2.5GHz dual-core Intel Core i5 Turbo Boost up to 3.1GHz internet speed the same as the 13-inch: 2.9 GHz 2.9GHz dual-core Intel Core i7 Turbo Boost up to 3.6GHz

    The retina MBP will be faster than the conventional one on boot and shutoffs as well as very demanding CPU/GPU intensive applications.  As far as web browsing , text editing and other non-CPU intensive applications there will be little if any difference between the two.
    If you install A SSD in the conventional MBP, it will be faster than the retina due to the faster CPU.  Note also that the conventional MBP can have up to 16 GB RAM installed. The retina is restricted to a maximum of 8 GB.
    You will have to weigh the differences in the display, speed, form (weight) and flexibility as to how they suit your needs.  All I can do is to and highlight the differences.
    Ciao.

  • How to make a custom object function the same as the Competitor and Partner

    Would like to use a custom object to function the same way the Competitor and Partner objects work in CRM. I have not be able to accomplish this. Do you know if it is possible? Can the specialized functionality of the account relationships fields and layouts be leverage with a custom object?

    Hi Peter. Thanks for the reply.
    I assumed that if I used the project style sheet during the export, Word would convert the style so that it looked the same as in the HTML. Is that a bad assumption? I'm currently not mapping to any template equivalent for these message box styles. I did try it as one of my attempts, but I couldn't figure it out. It never seemed to take the style in the .dot.
    Anyway, if I use just 1 style, such as just the MsgBox, I obviously don't get the white paragraph between the title and message. That white paragraph comes from the first <p> tag in the MsgBox style. But I need to have the <p> tags in there because they're better for our localization process than line breaks.
    I did do some tweaks that made it look better. Basically I structured it so that the MsgBoxTitle div is now inside the MsgBox div. Something like this:
    <div class="MsgBox">
        <div class="MsgBoxTitle">PC-DMIS MESSAGE: </div>
        <p>Please do the following steps in the indicated order.</p>
        <p>1. Remove the current SH-1/2/3 stylus.</p>
        <p>2. Attach the SHSP (Stylus Holder Setting Piece).</p>
        <p>3. Jog the probe to a safe location with a clear line of approach
         to the port(s) being calibrated.</p>
        <p>4. Then click OK.</p>
        <p>After you click OK the machine will begin DCC measurement.</p>
    </div>
    And then I adjusted my styles borders, padding, and thickness. That helped it look more connected, but still doesn't look quite right:
    Would love to get rid of that white space after the title.
    If you have time, I would be interested in a more detailed example of how you did it.

  • Unable to set PIN - Error: "PIN must not be the same as the user's phone number"

    We are in an ongoing Lync Server 2013 deployment and have elected to set default conference PIN numbers for anyone that doesn't have them currently set.  We decided to make the default PIN the same as the person's telephone extension.  I realize
    this is not a secure PIN setting, but please bear with me.
    When I use PowerShell to loop through the people that do not have a PIN set and attempt to set the PIN to their five-digit extension, PowerShell returns the following exception:
    Set-CsClientPin : PIN must not be the same as the user's phone number (Error "18005").
    At line:1 char:1
    + Set-CsClientPin -Identity GenericUser -Pin '13579'
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (13579:String) [Set-CsClientPin], ArgumentException
    + FullyQualifiedErrorId : UserPin::SetPin::PinDoesNotMeetConstraints,Microsoft.Rtc.Management.UserPinService.SetOc
    sUserPinCmdlet
    I know what you are thinking:  by default, Lync has the AllowCommonPatterns setting set to $false on the Global (default) PIN policy.  But I have created another PIN policy called "Low-restriction PIN Policy" that has this setting set
    to $true and assigned this new policy to the users I am trying to set the PIN on.
    According to
    Microsoft's documentation on the Set-CsClientPin cmdlet, the description for AllowCommonPatterns is as follows:
    "Indicates whether or not "common patterns" are allowed in PINs.
    Common patterns include repeating digits (225577); 4 or more consecutive digits (991234); and
    PINs that match a user's phone number or extension number.
    If set to True common patterns (such as the PIN 123456, which includes consecutive digits)
    are allowed; if set to False common patterns are not allowed. The default value is False."
    Given this information, I do not understand why Lync Server 2013 is preventing me from setting a default PIN that matches their extension number when AllowCommonPatterns is set to $true on the PIN policy assigned to the user.
    Any ideas on what might be wrong?
    PS C:\Users\user> Get-CsUser GenericUser | Select-Object PinPolicy
    PinPolicy
    Low-Restriction PIN Policy
    PS C:\Users\user> Get-CsPinPolicy -Identity 'Low-Restriction PIN Policy'
    Identity : Tag:Low-Restriction PIN Policy
    Description : [20150224 SWS] Standard PIN policy.
    MinPasswordLength : 5
    PINHistoryCount : 0
    AllowCommonPatterns : True
    PINLifetime : 0
    MaximumLogonAttempts :
    PS C:\Users\user> Set-CsClientPin -Identity GenericUser -Pin '13579'
    Set-CsClientPin : PIN must not be the same as the user's phone number (Error "18005").
    At line:1 char:1
    + Set-CsClientPin -Identity GenericUser -Pin '13579'
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (13579:String) [Set-CsClientPin], ArgumentException
    + FullyQualifiedErrorId : UserPin::SetPin::PinDoesNotMeetConstraints,Microsoft.Rtc.Management.UserPinService.SetOc
    sUserPinCmdlet

    I just checked the management store replication status and it replicated.  I tried to set the PIN again and got the same error.  Here are my results:
    C:\Users\user> Get-CsUser GenericUser | Select-Object PinPolicy
    PinPolicy
    Low-Restriction PIN Policy
    C:\Users\user> Get-CsPinPolicy -Identity 'Low-Restriction PIN Policy' | Select-O
    bject AllowCommonPatterns
    AllowCommonPatterns
    True
    C:\Users\user> Set-CsClientPin -Identity GenericUser -Pin 13579
    Set-CsClientPin : PIN must not be the same as the user's phone number (Error
    "18005").
    At line:1 char:1
    + Set-CsClientPin -Identity GenericUser -Pin 13579
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (13579:String) [Set-CsClientPin
    ], ArgumentException
    + FullyQualifiedErrorId : UserPin::SetPin::PinDoesNotMeetConstraints,Micro
    soft.Rtc.Management.UserPinService.SetOcsUserPinCmdlet
    C:\Users\user> Get-CsManagementStoreReplicationStatus
    UpToDate : True
    ReplicaFqdn : edge.domain.com
    LastStatusReport : 3/3/2015 9:20:21 PM
    LastUpdateCreation : 3/3/2015 9:20:18 PM
    ProductVersion : 5.0.8308.556
    UpToDate : True
    ReplicaFqdn : frontend.domain.com
    LastStatusReport : 3/3/2015 9:20:21 PM
    LastUpdateCreation : 3/3/2015 9:20:18 PM
    ProductVersion : 5.0.8308.556

  • Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk. MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)

    Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk.
    MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)

    Try holding down the trackpad button while starting up the PowerBook.  Holding down mouse button during start up ejects the disc in the optical drive, so I'm guessing it would work the same with the button the the trackpad.

Maybe you are looking for