"Current assignment" field missing in Handling Unit status tab
Our scenario is as below:
1. STO created and outbound deliveries generated
2. Deliveries are assigned to shipment
3. Packing is done using RF transaction
In the normal scenario, the HU status tab would show the outbound delivery number in the current assignment tab. But for some Handling Units, the current assignment field shows blank. Also, the contents tab shows only the delivery line item number and not the delivery number. We have also noticed that the problem delivery line items have been packed in 2 different Handling Units, each containing the full delivery line item quantity. (not sure how this is possible). One of the HU is displayed correctly but the other one has the missing delivery number issue.
Has anyone encountered such a scenario? How is the system allowing to pack the same delivery item quantity in 2 different Handling Units? Any suggestions in this regard would be very helpful.
Hi,
Thank you very much...
i have another doubt.....
i am unable to understand determination of packing instructions.
where it is linking i am confused.
we are assigning the determination procedure in the T.code
OVHU2.(Maintain Packing Transaction Profile in IMG).
my doubt is where we are assigning this Transaction Profile in Handling Units.
Please help me....
with regards
Similar Messages
-
Field to store Handling Unit number
Hi Gurus,
What is the technical field name of Handling unit number we maintain in Delivery?
What is the table name?
How can see handling unit number for a material in delivery document?
Thank you
AnilHi Anil,
Table name is VEKP and field name is VENUM for Internal HU no and EXIDV for Externam HU number.
Regards, -
Failed to update handling units status
Hi,
I'm joseph. I'm trying to load my shipment in LM30. I have 8HU's in one outbound shipment. I successfully loaded the 5HU's but on the last 3HU's i encountered problem "Failed to update handling units status" <note that they are nested HU's>.
Do you know how to fix this problem?
Thanks in advance!
Edited by: jmanzanero on Jul 26, 2011 8:00 PMHello ,
Please consider the following points when doing the load process.
If loading is by HU, the HU must be still in the warehouse but post good issue deletes the HU from the warehouse. With Transaction LM30 , you can load the HU only before the goods issue. Also , all of the RF transactions provided in the SAP standard product are to be used for the warehouse operations. Here , the HU must exist in the warehouse to be able to use the LM30 for loading.
I hope this information has been helpful.
Best Regards,
Frank -
URGENT DELIVERY HANDLING UNIT STATUS ERROR
Hi Experts when i am doing PGI i am getting the following error and system is not allowing to do PGI
ERROR: When trying to read the status of an object (HU 210868), a system error occurred: For object number HU0000210868 there is no status object.Hi Ramesh,
The material is having the Packing ( Handling Units).
In delivery please do the Packing for the Materials because they have linked with the Handling Units. and Also check the wheather the Handling Units are configured properly.
For your Information please go through the Below which will help you further.
The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually.
This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
Table of Contents
Objective
IMG Menu The Starting Point
Handling Unit Management Overview
Start of HUM Outbound Deliveries Manual Packing Configuration
Define Number Ranges for Handling Units
Define Packaging Material Types
Define Material Group for Packaging Materials
Define Allowed Packaging Materials
Use Handling Unit Supplements
Maintain Goods Movements for Handling Unit Stock-Posting
Define User Status Profile
Set QM Check and Delivery Type for Each Movement Type
HU Requirement for Storage Locations and Default Values for Deliveries
Packing Control By Item Category
Define Requirements for Packing in the Delivery
Delivery Type Determination
Set Unique Number Assignment for HU Identification
Number Range Maintenance for HU Identification
Define Number Assignment for Each Packaging Material Type
Delivery Output type for Packing List
Maintain the Delivery Output Determination Procedure
What else to maintain after the Manual Handling Units Configurations?
Start of the Automatic Packaging Configuration
Define Number Ranges for Packing Instructions
Define Determination Type for Packing Instructions
Define Number Ranges for Packing Instruction Determination Records
What else to maintain after the necessary Automatic Packaging Configurations?
Appendix A: How to do Manual Packing for Non-Assigned Handlings Units?
Appendix B: Scenario 1 How to do Manual Packing by Delivery Item?
Appendix C: Scenario 2 How to Manual Pack the Materials into Pallets?
Appendix D: How to do Automatic Packing?
Appendix E: How to do Goods Movement for Handling Unit Material?
Appendix F: How to Unpack the Handling Unit Material?
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
Figure 1: Handling unit example
Structure
The handling unit object contains the following attributes:
Identification number
Dimensions
Weight
Volume
Status
Materials and quantities
Packaging materials
Packing instructions
A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
Handling unit header
The header data of a handling unit is divided in the following way:
Weight/Volume/Dimensions
General data
Means-of-transport data
Additional data
Output determination procedure
For more information about each of these detailed points, see Editing detailed data for handling units.
Status
The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
Handling unit item
The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
Integration
Handling units can be used in all processes within the supply chain.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Assign Serial numbers to handling Units in the Packing
Hi,
I'm using a Function module SERNR_ADD_TO_HU for to add Serial numbers into the handling units. Function module executed successfully and returns a commit value 'X', but table SER06 was not updated. Is there any thing i'm missing (or) is there any other function module for to add serial numbers to the handling uints.
Thanks in Advance.
Narasimha.Hi Narasimha.
You can use FM WS_DELIVERY_UPDATE to update serial numbers in HU assigned to deliveries.
I've just finished the code (it took me about 4 days to get it right!!! it was driving me crazy, but it's working now!!!).
Please find a sample code below:
DATA FOR BAPI WS_DELIVERY_UPDATE
DATA:
wa_vbkok_wa TYPE vbkok,
wv_delivery TYPE likp-vbeln,
bt_vbpok_tab TYPE TABLE OF vbpok,
bt_it_sernr_update TYPE shp_sernr_update_t,
bt_verko_tab TYPE TABLE OF verko,
bt_verpo_tab TYPE TABLE OF verpo,
bt_it_verpo_sernr TYPE TABLE OF hum_verpo_sernr,
bt_it_packing_sernr TYPE TABLE OF hum_rep_sernr,
bt_et_created_hus TYPE TABLE OF vekpvb,
bt_prot TYPE TABLE OF prott,
wa_vbpok_tab TYPE vbpok,
wa_it_sernr_update TYPE shp_sernr_update_t WITH HEADER LINE,
wa_verko_tab TYPE verko,
wa_verpo_tab TYPE verpo,
wa_it_verpo_sernr TYPE hum_verpo_sernr,
wa_it_packing_sernr TYPE hum_rep_sernr,
wa_et_created_hus TYPE vekpvb,
wa_prot TYPE prott,
wa_ef_error_sernr_update TYPE xfeld.
UPDATE DELIVERY
[0]
... DELIVERY - HEADER ...................................
MOVE s_vbeln TO wv_delivery. "delivery number
MOVE s_vbeln TO wa_vbkok_wa-vbeln. "delivery number
MOVE s_vbeln TO wa_vbkok_wa-vbeln_vl. "delivery number
MOVE 'J' TO wa_vbkok_wa-vbtyp_vl.
[1]
... DELIVERY ITEM - CONFIRM PICKING .....................
MOVE s_vbeln TO wa_vbpok_tab-vbeln_vl.
MOVE '00010' TO wa_vbpok_tab-posnr_vl.
MOVE s_vbeln TO wa_vbpok_tab-vbeln.
MOVE '00010' TO wa_vbpok_tab-posnn.
MOVE '2' TO wa_vbpok_tab-pikmg.
APPEND wa_vbpok_tab TO bt_vbpok_tab.
[2]
... DELIVERY ITEM - UPDATE SERIAL NUMBERS ...............
MOVE s_vbeln TO wa_it_sernr_update-rfbel.
MOVE '00010' TO wa_it_sernr_update-rfpos.
MOVE i_sernr1 TO wa_it_sernr_update-sernr.
APPEND wa_it_sernr_update.
MOVE i_sernr2 TO wa_it_sernr_update-sernr.
APPEND wa_it_sernr_update.
APPEND LINES OF wa_it_sernr_update TO bt_it_sernr_update.
[3]
... CREATE HU ASSIGNED TO DELIVERY ......................
MOVE 'BP02' TO wa_verko_tab-vstel.
MOVE s_matnr TO wa_verko_tab-vhilm.
MOVE 'E' TO wa_verko_tab-exida.
MOVE 'BP01' TO wa_verko_tab-werks.
MOVE '0002' TO wa_verko_tab-lgort.
MOVE '01' TO wa_verko_tab-object.
MOVE s_vbeln TO wa_verko_tab-objkey.
APPEND wa_verko_tab TO bt_verko_tab.
... EXECUTE BAPI (PICKING & HU CREATION) ................
CALL FUNCTION 'WS_DELIVERY_UPDATE'
EXPORTING
vbkok_wa = wa_vbkok_wa
synchron = 'X'
NO_MESSAGES_UPDATE = ' '
commit = 'X'
delivery = wv_delivery
update_picking = 'X'
nicht_sperren = space
it_sernr_update = bt_it_sernr_update
IMPORTING
ef_error_sernr_update = wa_ef_error_sernr_update
TABLES
vbpok_tab = bt_vbpok_tab
verko_tab = bt_verko_tab
et_created_hus = bt_et_created_hus
prot = bt_prot.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
[4]
... PACK ITEMS ..........................................
LOOP AT bt_et_created_hus INTO wa_et_created_hus.
... ITEMS:
MOVE wa_et_created_hus-exidv TO wa_verpo_tab-exidv_ob.
MOVE wa_et_created_hus-exidv TO wa_verpo_tab-exidv.
MOVE '1' TO wa_verpo_tab-velin.
MOVE i_matnr1 TO wa_verpo_tab-matnr.
MOVE s_vbeln TO wa_verpo_tab-vbeln.
MOVE '00010' TO wa_verpo_tab-posnr.
MOVE '2' TO wa_verpo_tab-tmeng.
MOVE 'BP01' TO wa_verpo_tab-werks.
MOVE '0002' TO wa_verpo_tab-lgort.
MOVE '2' TO wa_verpo_tab-anzsn.
MOVE s_vbeln TO wa_verpo_tab-rfbel.
MOVE '00010' TO wa_verpo_tab-rfpos.
APPEND wa_verpo_tab TO bt_verpo_tab.
... SERIAL NUMBERS:
MOVE wa_et_created_hus-exidv TO wa_it_verpo_sernr-exidv_ob.
MOVE s_vbeln TO wa_it_verpo_sernr-belnr.
MOVE '00010' TO wa_it_verpo_sernr-posnr.
MOVE i_sernr1 TO wa_it_verpo_sernr-sernr.
APPEND wa_it_verpo_sernr TO bt_it_verpo_sernr.
MOVE i_sernr2 TO wa_it_verpo_sernr-sernr.
APPEND wa_it_verpo_sernr TO bt_it_verpo_sernr.
ENDLOOP.
MOVE '1' TO wa_it_packing_sernr-zeile.
MOVE i_sernr1 TO wa_it_packing_sernr-sernr.
APPEND wa_it_packing_sernr TO bt_it_packing_sernr.
MOVE i_sernr2 TO wa_it_packing_sernr-sernr.
APPEND wa_it_packing_sernr TO bt_it_packing_sernr.
... HU HEADER:
CLEAR bt_verko_tab. REFRESH bt_verko_tab.
MOVE wa_et_created_hus-exidv TO wa_verko_tab-exidv.
APPEND wa_verko_tab TO bt_verko_tab.
... EXECUTE BAPI (PACK ITEMS INTO HU) ...................
CALL FUNCTION 'WS_DELIVERY_UPDATE_2'
EXPORTING
vbkok_wa = wa_vbkok_wa
synchron = 'X'
commit = 'X'
delivery = wv_delivery
TABLES
verko_tab = bt_verko_tab
verpo_tab = bt_verpo_tab
it_verpo_sernr = bt_it_verpo_sernr
it_packing_sernr = bt_it_packing_sernr
prot = bt_prot.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Hope it helps!
This is my first post in this forum. Don't forget to vote if the solution suits you!
Thanks,
-ct- -
Hi Friends,
i am getting problem while creating delivery for material with handling unit in Packing.
Please help me
Error Message:
Handling unit 299999990000000151 has status 0010 - No Assignment to outbound delivery
with regardsHi,
Thank you very much...
i have another doubt.....
i am unable to understand determination of packing instructions.
where it is linking i am confused.
we are assigning the determination procedure in the T.code
OVHU2.(Maintain Packing Transaction Profile in IMG).
my doubt is where we are assigning this Transaction Profile in Handling Units.
Please help me....
with regards -
Assigning Serial no to Handling unit
Dear All ,
I am having problem in creating serial no for the handling unit which i have created in the transaction code HU02. I am only able to create serial no for the items within the handling unit but is unable to create a serial no for the handling unit.
Please anyone tell me is there any way to create serial no for Handling Unit by this transaction code or any other transaction code.
Help me in resolving this matter , i need to resolve this problem urgently.
ThanksHi,
You cannot create serial number for handling unit.
Serial number can be created for the item of handling unit.
http://help.sap.com/saphelp_47x200/helpdata/en/2d/584bcea70f11d2b44e006094b9b9dd/content.htm
Regards,
Vishal -
Query problem: Some fields missing for org unit
I'm currently trying to fix a Minimum Compliance Report with some missing fields.
For a specific organisational unit no data is being generated for distribution and logistics.
How can i make sure organisational units generate a compliance figure correctly. The formula in the query is fine however when i generate the report there are X's in some fields.
How can i find the error?
any advice will be appreciated
Cheers
NeilHi Neil,
Have you tried using the function NDIV0 or NOERR in your formulas? The X in some of the fields may be due to undefined values (e.g. division by zero).
Hope this helps,
Juice -
Handling unit status at table level
Dear Experts,
I want to know the logic to find only those HUs which exist in the inventory i.e. which are present physically. I do not want those which have been delivered/deleted/scrapped etc. How can I get this at table level and what filters should I use?
Regards,
SachinHello,
the only way (as I know) is to use transaction HUMO and set filter for field HU-managed storage loc.='X' in ALV
Andrzej -
Handling Unit Status (0031) - Physical Inventory
Hello Friends,
We need to know when the system change HU status to 0031 in table VEKP (HU Header) . We assumed that, it will be during physical inventory posting for HU's and for testing the following transactions are executed -
1. HUINV01 -
2. HUINV03
3. HUINV04
4. HUINV05
However after physical inventory doc posted and material document generated for difference, system still showing the HU Status as 0020.
In this regard, please suggest whether we are doing the correct way or what is the method to adjust the HU's and when the system update the status 0031 in HU table.
Appreciate your supprt.
Thanks
Best Regards,
GouthamHello Friends,
Very greatful for your support.
Best Regards,
Goutham -
To Update the status of a handling unit in VEKP table
HI,
My smartform(picking slip ) is triggering from vl02n transaction,my requirment is
to change the status of handling unit to 60 (Delete) ,after my form printed,
I checked with FM hu_update_status but it is not changing the VEKP-status field for that particular hanling unit .Hi,
What's the link between Printing the Smartform and Updating the HU status?
Generally Smartform is used to print the Output of Packing Slip,?
You mean after packing is over you have to Modify the handling Unit status?
then you have to find the status of packing and based on that field you have to modify the JU status.
Regards,
Anji -
Confirm Transfer Order - Assign Handling unit
Hi All,
When I try to confirm a Transfer Order system by default assigns a Pallet (packaging material - pallet) handling unit.
Is there a way I can assign a Master Carton handling unit (packaging material - MC)?
Am I missing any customizing entries?
Please help.
Thanks,
MeghnaHi,
the customizing for the creation of the Pick-HU:
IMG: Logistics Execution -> Warehouse Management -> Interfaces -> Shipping -> Define Shipping Control.
Define Control for Automatic Creation of Pick HUs. Check the entries for you whse/source/destination/movmnt type.
I suppose at least that is what you mean with "by default assigns a Pallet (packaging material - pallet) handling unit". Or anything else?
Best regards
Juergen
Edited by: Juergen Pitz on Feb 17, 2010 8:38 AM -
Hi All,
How to give external number range to a handling uni.
The scenario is:
In HU02 screen I am giving packaging material number, material number and quantity.
Than when I press enter system automatically taking one number in the handling unit field.
But my client wants to give here an external number range not the internal number range.
How to give external number range for the handling unit?
Regards
Ashishai,
I am also not having access to SAP currently i am giving you the following information, check this out
Assigning New Numbers for Handling Units
Use
If, for example, you are going to deliver handling units worldwide, unique number assignment for identification of the handling units is necessary, and it is also a good idea to assign SSCC18 numbers ( see also EAN128).
Prerequisites
In the Customizing settings for the packaging material type, you must maintain the Handling unit type field.
In Customizing, choose Logistics General ® Handling Unit Management ® External Identification ® Define Number Assignment for Each Packaging Material Type.
Maintain the HU type for EAN128 field for the relevant packaging material type.
Procedure
In the packing dialog, select the Pack material tab.
Select the handling unit for which you want to assign an SSCC18.
Choose Extras ® SSCC number assignment.
Result
A new SSCC18 number is generated and automatically assigned to the handling unit.
regards
Sudhir -
Duplicate Handling Unit Number
Hi All,
I am stuck with this error where I can see same handling unit no. in two different deliveries. I am not able to figure out why is the handling unit repeating. I checked it in the VEPO table where I see same handling unit no but in different year. So i am guessing it is repeated with fiscal or calendar year. Can any body please help.
I am maintaining number range using SNRO --> HU_VEKPThis could be repeted handling unit number.Check the HU number range is the HU number used before ?.I think you can compare the handling unit number with current number series.
Befor conclude number range before assigned to new delivery is the handling unit is un assigned status 12 (This you can see HU03 transaction ).If yes then there is no problem assigning of handling unit to new delivery.What is the satus of old delivery is it completly receipted or it is customer delivery ?.If it is inbound delivery and completly receipted and the handling unit status before 12 then there is no problem. -
Extrernal Number Ranges for Handling Units in COWBPACK
Dear Friends,
I need to activate external number range for handling units in COWBPACK transaction.
When I run COWBPACK, I don't get any field to enter Handling Unit Number.
Can anybody suggest the way out.
Regards,
HarshOK
Maybe you are looking for
-
Format external drive partition under 10.2.8
Hello. I have been trying to setup a WD My Book 500gb with 2 partitions to be used as on offsite backup unit for our business computers. We have one Mac (this G5), and 4 Windows stations (3 XP/ 1 98SE). I am trying to setup this unit with one partiti
-
Yoga 2 Pro : BIOS Update on a clean Windows 8.1 Pro install
Hi, I recently bought the Yoga 2 Pro. Like everybody I have the yellow problem. After buying it, I reinstalled my computer with a fresh Windows 8.1 pro install. I was wondering if anybody has already tried updating the BIOS on a clean Windows 8.1 ins
-
Thunderbolt target display - mini to MBP
I have a mac mini and want to use the target disply function on my MBP. both devices connect via Thunderbolt, pressing CMD F2 on the MBP unfortunatley doesnt give me a screen. Is there something I am missing? best -H
-
My "What's New" procedure doesn't show the result Search result page
Hi, I needed a "What's New" report for a content area. The advanced search screen has the option to query with the create date, but you can save the search with something like #sysdate-7. So I created the following procedure: create or replace proced
-
Where are my discussions on this new layout?
where are my discussions on this new layout?