Current employer wants 90 days notice, and I have an Interview cross country.
We have a colocated server rack with a local data center and use their DNS.
We were given a range of external IPs we could use. I can navigate to some of them but not others.
I called the data center and they said they don't have anything between us and their DNS and it must be a firewall issue.
I can't figure out what's wrong with my firewall settings though. I'm using a Juniper SSG-550.
I setup a rule that allowed HTTP and PING through and setup a NAT rule for one of the external IPs to an internal one. Can't ping it.
I can ping others that are setup this way, and one IP that has no enabled rules at all!
Where can I start looking to figure out what's going on?
Cloud costs shouldn’t be confusing; fortunately, SoftLayer delivers cloud resources without the cloudy pricing. Get complete visibility into your cloud costs with clear, consistent pricing so you can ensure you only pay for what you intend to use. We strive to deliver the best cloud performance for the price so that you can build your big idea, build your business, and build the future. Check out our pricing detailshere.
Similar Messages
-
i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?
I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown -
I bought iPhone 6 Plus few days ago and I have the following problems:
1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
I would highly apreciate any help
Kind RegardsI bought iPhone 6 Plus few days ago and I have the following problems:
1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
I would highly apreciate any help
Kind Regards -
I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?
Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry -
Hi my 4s is only 5 days old and I have the OTTER Box from day 1 and it has turned off by itself and will has not turned back on some help let me know what to do I'm dieing over here
If it is only 5 days old, take it back to where you bought it
and get it replaced. -
Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.
Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software. -
I originally had Firefox 3.5 and was invited to download beta 4 which I have. Then an update to a higher level of beta 4 came in and I downloaded that. Now you folks are introducing 5.0 and I have downloaded it twice, but it doesn't seem to be either downloading or have any results when I attempt to check what version is currently running in the properties of this site on my laptop.... I'm using windows 7 home premium version...
You are showing Fx5. The Desktop icon doesn't change in my experience. There has never been a 4.12 version.
To check version Help>About Firefox, or
Help>Troubleshooting Information, or
Options>Advanced>Update>Check update history(little box at the bottom). -
McAfee site advisor is slowing down Firefox.
I want to keep it and not disable it as suggested earlier.
I have disabled it for now but I want to use it and it is messing up Firefox.
What to do?Locked as duplicate of [https://support.mozilla.org/en-US/questions/1009350 /questions/1009350], please continue there.
I replied to that thread. -
I have heard of people ordering their iphone 6's and having them shipped out in the next day. I understand demand is extremely high but I don't understand why it has to take this long for my order to be fulfilled.
mattminsch, I know that you're excited to get your new device and we are too. The demand for these devices would most certainly be high and depending on the model that was purchased. Currently for the time frame that was mentioned the ship date would be 10/31 for most models. Once the device has been set to ship only then would you see the order change from processing to shipped. Do you remember what model you purchased?
AdamG_VZW
Follow us on Twitter @VZWSupport. -
My situtation is this, my soon to be ex previously set up an ipad with both our numbers and we share a linked itunes/icloud account so if my phone is off he gets all my messages via his ipad that I DO NOT have access to his ipad at ALL. I can't set up my own itunes account (not yet until I leave him) otherwise he will know I am leaving him and it will cause major problems. So I was hoping that if I turn off iMessages on my iphone 5 and just talk to my family via SMS and NOT touch his precious ipad mini, that he wont be able to get my messages anymore and if I turn off iCloud storage and back up as well on my iphone only. Is this correct? Its just a temporary solution I am hoping. I have searched for days and hours and I just cant find this answer anywhere....
Do I HAVE to turn off my phone number off or delete it on his ipad? I am really hoping I can just do this at my own end and not touch his ipad in anyway or have to change my itunes id YET. Once I leave him shortly, I will create a whole new ID etc. I just wanna know if I can do this myself on my iphone only. Please any experienced help would be greatly appreciated. Thank you so very much.mazwig wrote:
I just want to know if I turn off iMessages and iCloud Back up, and ONLY use SMS myself and my family just SMS's me - and do this on my PHONE ONLY and not touch his ipad (so he doesn't know), if he will get any of my messages I send or receive on his ipad please. Its just a temp thing and I just want to take action myself on my own phone and want to know if this will work. Does anyone know?
SMS messages will not go to the iPad Mini. It's not capable of receving them. If you have access and can do it without it causing a problem, remove your iPhone from the Apple ID Support profile:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"
If anyone in your family uses iMessage, they will go to both you and your boyfriend unless you do that.
To be completely safe, you may want to simply use an alternate message app such as Skype, Viber, Whatsapp (assuming everyone has a smartphone) until the issue is resolved. Google Voice will also allow you to send and receive texts to another number on your phone.
Best of luck. -
the numbers turn out grey next to my apple id and i wanted to buy i song but it said my account was going to be debited when i have $25 still on my iTunes acct from an iTunes gift card!
Contact Apple for assistance by going to https://expresslane.apple.com, then click iTunes>iTunes Store>Account Management>The topic is not listed.
-
I have Lightroom 5 (CC) on a Mac OSX Yosemite. Today when I went to continue working on a large folder of images in LR I noticed that in the corner a few stated that LR couldn't locate the flies (I have never moved or renamed any). So I went to look for the images and they were light grey and couldn't be clicked on. I decided to just close LR and try reopening it. Now both LR and PS will not open and they just say "Lightroom/PS quit unexpectedly" but will not reopen when I click on the blue reopen tab. It also looks like about 200 images from the file I was working on have also moved out of their original location on the hard drive (again, I never moved them or made changes that would cause them to relocate). Please help, I'm over 20 hours into editing and am praying I don't have to re-do all that work! Thanks!
I went to the Apple store today and had them officially reset/repair my user permissions on my machine. That didn't work right off the bat. So the Apple 'genius' moved all Adobe .plist files to another folder and told me to restart all apps that were giving me issues. Things then worked flawlessly. He moved only .plist files back into Adobe's area on my machine that needed to be there – he trashed the rest.
I thought things were fixed, but this evening when trying to apply a Warp Stabilizer VFX effect to a time-lapse .jpg sequence inside After Effects CC, the same error popped up and wouldn't stop popping up until I quit both After Effects CC and Adobe Media Encoder CC.
I am now exporting that time-lapse from AE using AME and things were working, but as I was typing this, I received an "Adobe QT32 Server quit unexpectedly" error. The render in AME seems to still be working, however. I'm not sure what the purpose of that error message is...
Any other ideas on this? Please help! Would completely wiping my machine and starting from scratch help? Thank you! -
Since the last software update for mountain lion, I am having a problem when trying to remove any screenshots to the trash. A box appears saying "Finder wants to make changes. Type your password to allow this"
I have checked Finder Preferences and cannot find any box that I can 'UNTICK' to resolve this. I sometimes take a lot of screenshots when I am researching something and now find I have to enter my password for every screenshot to be removed to trash.
Anyone got a solution please, ThanksHave you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
-
I got a bill for $33.59 on 4/28 which I think is wrong. I have not heard from you and sent this in 2 days ago. I need an answer
This is a user to user support forum. Apple is not here. Apple does not answer questions here.
-
Trying to purchase an app on my iPad but it wants my security question answers for verification but I don't remember them. What do I do
No, only Apple can and is not here:
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Maybe you are looking for
-
Cross app copy and paste stoped working with 5.1 any suggestions?
After over the air upgrade to 5.1 on Verizon cross app copy and paste stopped working. Copy in one app no past option in the other. I have tried power cycling to no avail. Any suggestions prior to restoring the phone with iTunes?
-
Flash sprite in Director: slow, slow!
It's not a new problem but maybe there's a new solution?... I have a Flash game in a Director projector. The Flash games works fine by itself (not embedded in Director), but inside Director, everything runs much slower. Is there any ways to speed thi
-
Searching for missing files, using PSE6
After I have transfered a batch of photos using the -file -get photos -From files and folders, the thumbnails appear in " Organizer" but when I want to look at the photos in full screen they come up unclear and a dialogue box comes up ," sear
-
IPod doesn't work after 1 year - costs $250 to fix????!?!
My wife got me this ipod for graduation last year. I am just a couple months outside the 'warranty' and it doesn't work. The thing cost like $400 at the time.. and it will cost almost $300 to look at fixing. This is extremely disappointing. I thought
-
My iphone 4s is still disabled after restore and update, what do i do from here
My power button is broken and my phone is disabled. i let my phone die and used itunes to restore it but its still disabled and i dont know what to do.