Current Forms file size and date (i.e. datetime and size of .fmx file)

We have a need to get the fmx size and timestamp from within form. I can get the name of the file but can also get other details from within a form?
Thanks
Bala

am i correct that this 'my photo stream' process is not removing any image data?
Yes,  as long as you have iPhoto's iCloud preference pane configures as follows:
You're be getting the full image file, pixel dimensions, etc. which is essentially a bit by bit copy of the photo on the Phone.
When you add tags and other metadata and export the file out of iPhoto as a jpeg with the checkboxes selected to include that metadata there will be some image compression.  However, if one chooses High or even Medium JPEG Quality one will be hard pressed to detect any image degradation unless printing very, large prints or otherwise displaying the image at a very, large size.
I ran a test on a 1.4 MB photo from my iPhone  and compared the original to two exports, one at High and the other at Medium JPEG Quality and got these results:

Similar Messages

  • Maximum package size for data packages was exceeded and Process terminated

    Hello Guru,
    When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
    Thanks & Regards,
    Suresh.

    Hi,
    When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
    1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
    2) Run the load only to PSA.
    3) Once the load is succesfull , then push the data to targets.
    In this way you can overcome this issue.
    You can also try RSCUSTV* where * is an integer to change data load settings.
    Change Datapackage size for extraction, use Transaction RSCUSTV6.
    Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
    IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
    Hope this helps.
    Thanks,
    JituK

  • Generating a PDF file from the date entered on line and serving it to user

    All,
    I need to create a page where the data will be entered by the user outside the company.
    The requirement is to create a pdf file which dynamic images and a bar code and server ir once the user clicks a button.
    In short, they do not want the user to go to the report manager or process monitor to see the image.
    Any thought on how this can be accomplished ?

    Is there a special reason to create PDF file? I have generated dynamic images and HTML content including Barcode based on user data entry on the fly.If you need more information, please contact me at [email protected]

  • Functional and data differences between W_GL_BALANCE_F and W_GL_OTHER_F

    Hi:
    Can some explain what the functional and data-source differences are between W_GL_BALANCE_F and W_GL_OTHER_F? Both seem to group by GROUP_ACCOUNT_NUM.
    Thanks.

    That is not possible; all transaction in GL Other will end up in GL Balance.
    The two tables are essentially having the same data but at different grain. Two main differences:
    - GL Other have individual journal transactions; GL Balance have them summarized to the account level.
    - GL Other is truly additive since its just individual journal transactions. i.e. you can just sum() any number of transactions and wont double count a trx; GL Balance is a monthly snapshot table. i.e. it provides account balance for all accounts for every month end, so you can never add two snapshots.

  • Understanding that the iPhone 5 won't support simultaneous voice and data transmissions over Verizon and Sprint LTE networks will it ever be able to support VoLTE (Voice over LTE)?

    Understanding that the iPhone 5 won’t support simultaneous voice and data transmissions over Verizon LTE network will it ever be able to support VoLTE (Voice over LTE)? Could Apple add VoLTE support later on? It seems pretty clear the MDM9615 chip supports VoLTE but the baseband software by Apple does not. Could Apple add it to the baseband later on? When will Verizon turn-on/enable VoLTE?
    Referral Link: https://discussions.apple.com/message/19614226#19614226

    Well in my research Verizon is already testing Voice Over LTE in select markets via a few news releases, and rumor has it that a few smartphones are already VoLTE ready. http://news.verizonwireless.com/news/2011/02/pr2011-02-09f.html

  • File properties: mysterious dates for created, modified and last opened

    I've seen this ever since I started using my Mac - I am a relatively new Mac user (a year or more vs. well, decades on Win/PC).
    Finder: click on a file and it will show its properties. It will have a "More info" button.
    The dates displayed between the 2 above are different.
    1) In the "immediate" display it would say something like:
    Last opened: Today at 10PM
    - this wrong day, "correct" time
    - considering that it will display this at say 7AM "today"...well, it's a "future" date/time
    2) If you click the More info button, the "truth" comes out
    Last opened: Yesterday at 10PM (accurate)
    Never really cared, but thought I'd ask here. At some point, if I start some development on the Mac, and filesystems, file properties are involved, this will obviously be an issue. I don't even know if this affects file searching based on these properties - again, new user, using Mac for very specific purpose, but usage is definitely on the rise, so I'd like to get some direction on very basic OS behavior like this fully understood.
    Thanks and happy new year to all!

    EdSF wrote:
    Thanks VK. I'm the only user.
    Can you please clarify on what user accounts have to do with this behavior?
    I've seen many times when corrupt date settings in the global user preference file cause wrong modified dates to be displayed in finder. in that case if you make a different user they will be displayed correctly. the file in question is ~/library/preferences/.GlobalPreferences.plist.
    It's ok to be technical in your response....if it goes over my head, I'll be frank and ask for clarification....
    - Is it a user-defined preference/setting?
    - It's almost like a busted UTC/time zone routine (somehow "TODAY" is UTC, but the time value doesn't match) re: 10PM last night on PT is/was "today" in UTC....

  • Sales hierarchy . role based reports and Data access, Best practice and sol

    Dear all,
    Currently working on a solution for Sales. There a geography and sales position hierarchy.
    e.g. (USA,EU,ASIA) --> EU head -->UK head -->Northern UK head -->London head -->East london--> Postal codes in east london.
    so altogether 7 roles and 7 positions, all these users can see data at it's level and below.
    Also the summary report/ Prompts/ subject area columns for each of these users must be at their corresponding level and just 1 level below.
    e.g. EU head by default must see column EU and country UK, UK head will see report only for UK and Northern UK region and so on.
    After lots of thinking i am planing to take approach of creating 6 sets of similar dashboard/ different prompts/ different global filters/ reports.
    Data level access is not at all issue i am easily able to manage.
    Request experts to guide is there is any other better approach to take for objects in catalog.?
    many thanks in advance.
    Regards,
    Yogen

    Dear Srini,
    Data level Security is not at all issue for me. Have already implement it and so far not a single bug in testing is caught.
    It's about object level security and that too for 6 different types of user demanding different reports i.e. columns and detailed drill downs are different.
    Again these 6 types of users can be read only users or power users (who can do ad hoc analysis) may be BICONSUMER and BIAUTHOR.
    so need help regarding that...as we have to take decision soon.
    thanks,
    Yogen

  • Copy the SQL Binaries and Data to another drive and then change the drive letter to previous drive letter

    Hi All,
    We have SQL Server 2012 SP1 installed on E drive (which means SQL Binaries, Database and LOGs) are in the same drive E, we are not able to backup the SQL Server because according to Backup Vendor their is a problem with the DISK E which is why the backup
    is not successful, We have added one more drive with the same space, we have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to
    start SQL Service but it was not starting, we have again reverted back the original drive to E and service was successfully started, please note here that SQL server service logon is NT service / local service. Please help us that how to do achieve this as
    we are using the same E drive and OS should not know any thing. Please help us to copy and then change the drive letter to E so that we can delete the old drive.
    Thanks
    If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

    We have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to start SQL Service but it was not starting,
    You should not have done this. Even if you install complete SQL Server on Separate dedicated drive few binaries would always go on system drive that is C drive so your idea of moving files to other drive would sure create a problem. As a fact you cannot
    move SQL Server complete installation from one drive to other apart from uninstalling and reinstalling again.
    Copy it back an hope fully you would be able to restart. Why should you take a product which allows you to change sql server drive its a bad product. I guess backup engineer does not how to configure backup agent
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • Clock looses time and date, Clock looses time and date

    Clock losses time & date when battery dies whats my problem?

    Well, probably the reason that would happen is that when the iPod is asleep, a tiny bit of the battery keeps the clock alive. If it is completely deprived of all power, that it wouldn't be able to keep that small process going. Just make sure to not let the battery die entirely, and it should be fine. I usually keep my iPod plugged in, but if I can't, I stop using it when I get the 20% battery warning. If you put it to sleep when you get this alert, there is plenty of juice to keep the clock alive in the background for quite a while.

  • My iphone 5c is having trouble connecting to internet and staying connected, the time and date are messed up and a black screen pops up randomly. what can i do?

    i need help fixing these problems with my iphone 5c. When i connect to wifi it connects then minutes later disconnects and makes me put in my password again. i have to change the time every hour or so because it stops at a certin time. when im trying to use my iphone sometimes the screen turns black and it doesnt turn back on for a few seconds. please help
    thanks, Kim Wibbels

    The people having problems not connecting without AC power was from the last OSX update to 10.5.8, this problem has since been resolved with an Airport Client update.
    Your profile shows that you are running 10.5.6... I would suggest updating you software to the latest 10.5.8 as this fixed some Airport issues.
    You may want to unplug the router, let it set a minute the plug it back in.
    Is your Powerbook still having these issues? How long has the powerbook been experiencing this problem?

  • Open and move files follow by date

    How do I open files follow by date for button 1 and move the files follow by date for button 2?
    Thanks

    Try something like this
    Imports System.IO
    Public Class Form1
    Const oldFolder As String = "c:\temp"
    Const newFolder As String = "c:\temp1"
    Dim count As Integer = 0
    Dim oldFiles As String()
    Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
    'open follow by the file names
    If count < oldFolder.Count Then
    Dim ps2 As Process = Process.Start(oldFiles(count))
    count += 1
    End If
    End Sub
    Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
    'get files
    Dim info As New DirectoryInfo(oldFolder)
    oldFiles = info.GetFiles("*.jpg").AsEnumerable() _
    .OrderBy(Function(x) x.LastWriteTime) _
    .Where(Function(x) x.LastWriteTime.Date = Now.Date) _
    .Select(Function(x) x.FullName).ToArray()
    count = 0
    End Sub
    End Class
    jdweng
    Joel, there are nothing happen after run your codes
    Imports System.IO
    Public Class Form1
    Const oldFolder As String = "C:\Users\hwai\Desktop\Capture"
    Const newFolder As String = "C:\Users\hwai\Desktop\ New folder(3)"
    Dim count As Integer = 0
    Dim oldFiles As String()
    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
    'get files
    Dim info As New DirectoryInfo(oldFolder)
    oldFiles = info.GetFiles("*.jpg").AsEnumerable() _
    .OrderBy(Function(x) x.LastWriteTime) _
    .Where(Function(x) x.LastWriteTime.Date = Now.Date) _
    .Select(Function(x) x.FullName).ToArray()
    count = 0
    End Sub
    End Class
    Thanks

  • We have iPhoto and Mavericks - Cannot play video and get error (OSStatus error -54). Have run permissions and rebuilt iphoto database.. This is most valuable 3 minute movie file I have... Help

    Has anyone a clue how I can save myself from losing most valuable video clip I have ever taken.? Have a fully up to date Macbbok pro retina and most recent iPhoto. Had 55,000 pictures and a few videos in iTunes database. Just a few months ago also installed iCloud. Now find my London Big Ben Fireworks shot of fireworks at midnight coming from clock just returns -54 error when I click it to play. Did a rebuild and permissions attempt at fixing without success. The front picture of start of video shows at start of pictures but only error box now pops up.
    I had a time machine backup that goes back some months and a old computer it may have been on but have not found it yet.
    I do not want to risk losing anything.  We are just finishing cruise of England and Med on our small boat-home and do not want to lose photos of our memories. Thought they were safe since in iTunes and backed up to TIME machine, and now learn they cannot be pulled out separately... Can anyone help us?
    Thanks. I am grateful for any help or ideas while we float out the winter here in England before trying to sail back to America next year.
    Happy Holidays.

    I could not find the original file.
    I did find a file folder named MASTERS.
    I did click down in it to where all the other original files seem to be listed in order.
    They are listed in files showing (name); (date modified); (date created); (size); (kind); and (date added)
    There is a symbol showing each file type, with one file type for photos and a separate symbol showing the movies before each file.
    All of them that are showing properly are listed in order with their name sequentially, ie:
    DSCN4738.JPG
    DSCN4739.JPG
    DSCN4740.JPG
    DSCN4742.MOV
    DSCN4743.MOV
    DSCN4744.MOV
    My valuable movie that now won't play is shown in iPhoto viewing page listing labeled DSCN4741.MOV
    I think I find it later...
    OUT OF SEQUENCE APPROXIMATELY 14 files later I show the file that is shown on the listing info when viewing now named
    New Years Eve Fireworks.MOV  1/1/12 Jan 1, 2012, 12:58 AM  258.1MB  QuickTime file  Feb 21, 2013, 3:46 PM
    NOTE: The creation time is exactly where it should be in sequence but camera taken with was off an hour
    Also, all files in list show the Feb 21, 2013 date - which is date Apple Store migrated my old computers files, which would have included my iPhoto library from my old MACBOOK PRO to the new one.
    I do now remember that in past I had played some of the files from the computer by clicking on them directly in the early hours of the morning - showing some of them to a friend - while messing around demoing this MacBk Pro Retina...
    Though I do not have a clear recall of it recall earlier having a hard time finding this file. I am now certain - based on the circumstantial evidence - I must have changed the name from DSCN4741.MOV to the name shown at the first line of the listing two paragraphs up.
    Now my quandary is how do I escape this mess I made for myself and restore it. I clearly am -- despite being 68 -- being more of a "script kiddie" than a "hacker", but not a competent one of either!
    Thanks for your help in analyzing this Terence, and hope you can help me fix my screwing it up.  Ed

  • How to calculate elapsed time(including time and date)?

    Hi all,
    I want to realize a function that can calculate the elapsed time which include time and date.Below is my thought:get the current time and date and store it to a .txt file then using the latest time and date subtract the time and date stored in the .txt file.how can realize it using the simplest way?I'm using LV7.1.

    Hi Idragon,
    you can do it like this.
    Mike
    Attachments:
    DateTime.PNG ‏12 KB

  • Data Carriers and Data carrier type

    Hi Sap Gurus,
    Pls let me know is there any necesssity of defining any new Data Carrier types other than PC,
    if so at what circumstances and requirements,
    also pls throw some light about data Carriers, when is the new data carriers required to be created
    at what circumstances and requirements.
    is that to access a document from different server or Different system, if it is so why is this required as the documents are always stored in a central content server and Once checked in, any one can access the document from Server,
    2) can we make use of Application softwares Installed in one System and make it run in another system, example,
    if there are say 4 system totally, among this S1 system1 has Autocad Installed in it ,
    rest of the 3 system have not installed Autocad, Can the system 2,3 and 4 edit the auto cad drawings in there system, does at this situations where Datacarries and Data carries types come in to picture,
    Please throw some light on this
    Thanks and regards
    Sathish

    Dear Christoph Hopf,
    Thanks a lot for your Quick Response
    as you have Explained,i assume it is mainly used to store a local copy or extra copy of the Original application files in the system which we use to View them, or if we feel to store the copy in any other system also.
    Example Say there are 3 systems S1, S2 and S3
    if we are viewing an original file in System S1 and want the same Copy to be stored in System S2  or S3.....
    then this data carrier configuration is required if iam right?
    But Sir apart from this funtionality can i also know the SAP definition purpose, as it defines  data carrier type as below
    The system requires the data carrier type in order to exchange data with other data carriers.
    This is the case, for example, if the user:
    wants to process original application files stored on another computer
    wants to use an application installed on another computer
    if i can interpret this in right way
    it tells us that, by use of data carrier and Data carrier types
    we can access a  original file stored in Different systems,
    if it is so why is this required as the documents are always stored in a central content server and Once checked in, any one can access the document from Server,
    2) can we make use of Application softwares Installed in one System and make it run in another system, example,
    if there are say 3 system totally, among this S1 system1 has Autocad Installed in it ,
    rest of the 2 system have not installed Autocad, Can the system 2, and 3 edit the auto cad drawings in there system, does at this situations where Datacarries and Data carries types come in to picture,
    if so how is this made possible?
    pls explain with example or Screen shots in Wiki if possible
    can u tell me what is the difference between Datacarrier and Datacarrier types with any examples as well
    Thanks and regards
    Sathish
    Edited by: sathish kumar on May 22, 2008 2:17 AM

  • Save a string to a file ...my file need a particular file name (time, date, etc)

    hello to all, 
    i have to save a file with a string..,with results of a test
    the file name must include time and date of my test, and has to append 2 underscore if my test failed
    some idea?
    Using LabVIEW 7.1

    gigi85 wrote:
    for months i need abbreviation of name JAN, FEB and so on
    It is all right there in the online help: time format strings.
    In this case use <%b> and optionally convert it to upper case.
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for