Current Gen Mac Mini TV Advice

Evening all!
Am helping my friend get his new Mac experience off to a flyer and so far all going well. He has his new mini hooked up to a Packard Bell monitor via a Mini Display Port to VGA adaptor. Results are better than I expected so that's all good.
He wants to use his TV in the room behind where he uses his Mac so will require a 5M or less cable run and he has the Mini-DVI port free. He only wants it for iTunes visualser and slideshows etc and the TV will be a pretty old Matshi with S-Video and Video the best available connections.
I was going to advise him to get a Mini-Dvi to Video cable and hook up via S-Video.
Does all this seem ok before I buy the cables?

Unfortunately, those older Apple video adapters, and for that matter, third-party adapters, don't work anymore with the current gen mini (or notebooks). But there are pretty cheap boxes that take VGA in and do the necessary signal translation to composite video or S-Video out. I would link you to one but the only ones I know of are NTSC here in the States. You'll have to search for a compatible PAL version. In the U.S., they run about $25, so not expensive.

Similar Messages

  • Current Gen Mac Mini as a HTPC

    In my current setup I'm using a 2010 Mac Mini C2D with 4GB as my HTPC, hosting my iTunes library plus my Movies and TV shows which are stored on a Drobo. The mini is connected to my Samsung TV by DVI to HDMI and by ethernet to my Airport Extereme. I use Plex to manage and stream my video to my iOS devices. I use airplay to play my iTunes library through my Airport express speaker systems (two sets) and it all works flawlessly, controlled via my iPhone or iPad.
    When it comes to upgrading my mini I'm wondering if the latest models will work as well. I'm not bothered that I'll be losing the DVD player too much.
    Any thoughts?
    Thanks
    VP

    Vestan Pance wrote:
    My Drobo is connected to my Mini by Firewire but if I were to upgrade the Mini I would only be able to connect to the Drobo using USB 2.0., as the new mini is Thunderbird or USB 3.0. Connecting to my library via USB 2.0 will work but it might struggle with 1080p video for example.
    FWIW, look again at the new Mini specs, it does have a Firewire800 port.

  • Latest Gen Mac Mini and Editing?

    I have always loved the idea of a Mac Mini as a supplementary editing machine to my Ma Pro.
    I’m looking at a 320G, 2.26GHz Dual Core Mini with 4GBs of Ram and an external HDD.
    Avid Media Composer requires a nVidia Graphics Card no smaller than an FX560 and the new Mini has a NVIDIA GeForce 9400M. I really want to use it to digitise/capture hours + hours of “talking heads” some DV some HDV. I can use the Mac Pro for all the other stuff. But if a Mini can help me capture all the footage I have then I can double my output very cost effectively. I would only use the Mini to run Snow Leopard an Avid MC or FCP 6.
    Any advice? BTW – Has anyone tried FC Suite 2 on a Mini or at least FCP 6??

    Yes, you are right to be concerned. Hopefully someone with that exact monitor will respond to your post.
    The Mac mini has an issue driving displays with non-coherent TMDS receivers in them above a certain frequency. In the following link, see the "Graphics and Video Support" section.
    http://support.apple.com/specs/macmini/Macmini_Early2006.html
    It's a roll of the dice whether the BenQ has a coherent TMDS receiver or not. If not, likely it will suffer the same fate as your friend's monitor. You can usually fix things with third-party software (SwitchRes X), but that's a bit of a pain.

  • Seeking new Mac Mini monitor advice

    I'm about to purchase a new Mac Mini i5. Any advice on an alternative monitor to the Apple 27 inch Thunderbolt monitor? I'm replacing an old 2006 24" iMac. Mahalo!

    Unfortunately, GKaya, I don't have any advice beyond what you might find in some of those posts. I received my Mac mini on 12/14/12, and the Mac mini EFI firmware update had just come out 12/10/12. So I never had any flickering issues with a 26" 1080p Vizio TV or now a 27" 1080p AOC monitor, each in turn connected via HDMI. And I have not had the "crushed whites" issue that a few folks still have. I'm not sure what the issue there is. I didn't do anything out of the ordinary to avoid it. I just plugged the TV and the monitor straight into the mini's HDMI port with an Amazon Basics HDMI cable and used the default monitor settings.
    And the picture is great. I eventually calibrated the picture with the AOC, but in the end, it made a very subtle difference, a matter of preference in brightness and temperature, not quality.
    There are reports that the beta off OS X 10.8.3 fixes the remaining HDMI graphics issues, so here's hoping that you'll be rescued soon.
    John

  • 2nd Gen Mac Mini, iTunes Streaming issues

    Feeling flushed I've replaced my ATV1, 1st gen Time Capsule and Mac Mini and moved them down to the retirement home we're working on.
    One of the reasons I replaced the Mac Mini was everytime I booted up I had to run diagnostics to get the airport running effeiciently . However, in the other place still using the TC as the wireless router it appeared to working much better. Then I added the old ATV1. Again for a week things were great.
    Then...... while streaming music to the ATV1 and an Airport Express upstairs I noticed it started coughing and cutting out. I'd have to reconnect the speakers (ATV1 in the same room & AE upstairs) and restart the track. After experimenting what seems to be happening is:
    When playing iTunes to the ATV1 and AE Speakers if I trying and download something large it cuts out, and if open Airport Utility or iStumbler (checking the power on each device for wireless power) it coughs badly recovering intermitantly. I can internet to my hearts content without any problems and up load massive documents to iDisk without interupting the music????
    Apart from the AE ('n') they are all 'g' devices. iStumbler is showing relatively low signal strength for TC (41% ish about 20 feet away) and the AE (19% immediately upstairs above the Mini). As we're on the beach the only two other neighbours signals are showing and are really weak.... so the 'noise' is almost nothing.
    In a wireless network siutation does the Mini talk directly to the speakers or does it have to go through the TC?? Is the Mini card dying or is it the TC? Caould I use another AE ('n') plugged into the Mini as the wirelss card?
    Or is it the ATV1 dragging the signal down?
    sigh... it was all going so well......

    Thanks that's really helpful.
    Sorry; aren't the old Mini, TC and ATV1 all g and the new AX n? Same principle though. I thought the AX was allegedly b/g/n compatible?
    Should have know the AX might be the prob. I had an issue with one here. It was too near the ATV1 and was interfering with its visibility. When I seperated them further (distance) the both became visible and signals improved. The trouble is because of the house construction I need a boost upstairs. The AX works great for internet extension.
    Did I read somewhere someone reset an AX for g only?
    Cheers.

  • New gen Mac Mini: Boot Camp install problems

    I've got a new version Mac Mini that was just released, 4GB RAM, 250GB hard drive.
    Fired up Boot Camp, and pressed the button offering a 32GB Windows partition.
    It rebooted into my OEM XP Pro SP2 CD, and installed OK (as in it loaded the files).
    The Mini then reboots, and dies with these 3 lines:
    *Press any key to boot from CD.....*
    *Disk error*
    *Press any key to restart*
    BTW, pressing any key does NOT restart anything. I have to use the power button to down it.
    I popped out the XP boot CD by holding down the mouse, and then downed the system again.
    Then I held down the Option key, which offers me the boot menu, and I selected Windows.
    It then dies again with the bottom 2 lines.
    I've tried removing the partition, and asking Boot Camp to make a 30GB partition.
    Same end results (it takes awhile obviously to get to the failure).
    Also tried a brand-new XP Pro SP3 install CD. Same results.
    Any ideas? Thanks!

    Hi Austra,
    I figured it out last night, and you are correct, the default Windows install method will NOT work.
    When XP first boots, it actually offers 5 choices, and the default is "Use this filesystem as-is without formatting". It will happily install, but that default choice does not write the MBR (master boot record) onto the disk. When you reboot again, the MBR isn't there, and the firmware halts. One little 512-byte sector keeps it from working.
    Really, Apple should write a MBR onto that partition during the Boot Camp process, it wouldn't be all that much extra trouble.
    - Tyler

  • Restoring Mac Mini - Urgent advice needed

    Whilst attempting to create a boot camp partition this morning my Mini had a kernel panic. After powering down, when turned back on I have no display so cannot see if any message is being displayed.
    Fortunately I'm fully backed up with Time Machine, but when attempting to insert the Leopard install DVD to try to recover, the disc won't physically load into the drive. I don't have a wired keyboard either so I'm assuming entering any commands at this stage will be impossible (I have 2 Apple wireless keyboards if that's of any use!)
    Can anyone suggest a way to at least get the Leopard disc to insert so that I can attempt recovery?
    And before you ask the machine is out of warranty so Applecare/phone support is not an option.
    Thanks in advance,
    Tom

    The drive first: If Disk Utility reports an error on exit and does not complete repairs, run it again just to be sure. If it continues to report error on exit it means there is damage to the drive which is greater than Disk Utility can resolve, and you with either then need to get a third party utility such as Disk Warrior or TechTools Pro, or perform a full erase and install of MacOS from your Leopard disk in order to resolve the problem. Obviously if the latter, then you should attempt to back up your data first, since the erase and install involves a full reformat of the drive.
    The fan: This is caused by the fact you performed a PMU reset on your system when in fact it doesn't have a PMU! This procedure causes the fan to run up to full speed at all times. Unfortunately, there is no guaranteed solution, but many report that an SMC reset (the Intel system equivalent of a PMU reset which is actually only for earlier PPC systems) works.
    To reset the SMC on an Intel mini:
    -From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    -Unplug all cables from the computer, including the power cord and any display cables.
    -Wait at least 15 seconds.
    -Plug the power cord back in, making sure the power button is not being pressed at the time.
    -Then reconnect your keyboard and mouse to the computer.
    -Press the power button on the back to start up your computer.
    You'll see the only difference really between the PMU reset you performed and the SMC reset you should now do is that the SMC reset does NOT involve holding the power button in while reconnecting power.

  • Patitioning HD on 1st Gen Mac Mini

    I am about to repartition my HD due to a fault. How long should this procedure take?

    The partitioning process and reformatting afterwards should be a matter of minutes.

  • Should I upgrade Intel Core Duo 1 Mac Mini (2006) to Snow Leopard?

    Okay I have a 80 GB Apple Mac Mini with Intel Core Duo 1 proccessor that shipped with Mac OS X Tiger (10.4.7) currently running 10.4.11 that I want to upgrade to either Leopard or Snow Leopard in a few months just in time for Christmas which I acquired in September 2006. It was the first Mac Mini model to include Apple's Front Row software and shipped with an Apple Remote (I know Macs don't ship with Apple Remotes anymore you have to buy them separately) and am now pondering an update. I've heard some things about Snow Leopard not working so well with older Macs even Intel based Macs that are only 32 bit.
    Thing is I just got a new MacBook Pro that shipped with Snow Leopard and it seems to run fine on the MacBook Pro except for the fact a few applications I wanted to install wouldn't work with Snow Leopard like Google Desktop for Mac so was wondering if I should update the Mac Mini also to Snow Leopard. I do not particularly like how Apple removed the transcoding features to export video from one format to another in QuickTime X that was available to QuickTime 7 Pro users (actually reinstalled QuickTime 7 Pro on my new MacBook Pro so I can still use that despite QuickTime X being installed) but like Expose integrated with the Dock Menu that's new in Snow Leopard and features like Cover Flow built into the Finder (available also in Leopard along with Spaces) so if I update the Mac Mini should I update to Snow Leopard or Leopard?
    This is a 2nd generation Mac Mini (the 1st generation had PowerPC chips) with Mac OS X Tiger and I've heard some negative news about upgrading Mac Mini to Snow Leopard so I want to get some more feedback on whether or not its worth it. The Mac Mini came with iLife and iWork 06 versions but updated iWork to iWork 08 Family Pack. Still have iLife 06 though and am still running iTunes 8.2.1 on the Mac Mini.
    I use this computer as my main system for syncing with iPods (I have a 5th gen video iPod and a 2nd gen iPod Touch that I sync with the iTunes Library on my Mac Mini which includes videos purchased earlier from iTunes Store and music purchases as well as TV purchases) so don't want to risk messing up the system with a Snow Leopard update if it is going to cause problems doing so. If Snow Leopard is not good for the Mac Mini will just update to Leopard and stick with Mac OS 10.5 Leopard on this system.

    I upgraded my mac mini 1.5GHz core solo to a Core 2 Duo 1.8Ghz in order to run most of SL's 64 bit stuff. I bought a pulled Core 2 Duo from ebay for $29 and it took about 1.5 hours to do the switch.
    The main downside with the 2nd gen Mac Mini is the kernel cannot run in 64 bit mode due to a 32 bit controller that cannot be upgraded. Yet, booting into 32 bit kernel is SL's default setting and as you may have read in articles when SL came out, relying on a 32 bit kernel does not slow down use of 64 bit apps. I maxed RAM to this mac mini's 2 Gig limit years ago which is a good thing for you to do too.
    I am happy to report the upgraded Mac Mini runs much faster than originally thanks to the 2 gig of RAM and the Core 2 Duo chip. Installing SL made it run faster still and consumption of memory for apps is lower (smaller pipeline requirements with faster CPU), and about 14 GIG of HDD space was recovered since I did not reinstall Xcode tools. I can now encode 1.5 hour long video files that used to take overnight processing time. CPU runs hotter, up to 89ºC, but usually run only about 10º higher on average than before while fan rev's not noticeably more than before between 1500 to 1800.
    If you are not comfortable to upgrade the CPU, I think you will still find some benefit to SL for $25. Alternatively you could sell your Mac Mini on ebay (these 2nd gen model are popular for those want to do the upgrade) and use the proceeds to buy a refurbished current gen Mac Mini.

  • Standard audio CD stuck and not recognized inside of Mac Mini

    I put a standard CD into the Mac Mini and now it does not show up on the desktop or iTunes or is acknowledged in any way. So, I cannot eject it. Just before this I tried to insert another CD and it would not take it in at all. The CD that is now stuck inside the Mac Mini worked just fine on the same computer earlier in the day.
    I have restarted, shut down and restarted, all to no avail. I cannot tell if the CD spins up at startup or not. I've tried a few different backdoor ways to eject media, but since the computer not even recognizing it has a CD inside there is, in theory, nothing to eject.
    This is the current gen Mac Mini. I've been ripping a lot of CDs lately and this computer is a dedicated music server.
    Thanks for any help.

    Hello Andrew,
    I have posted the following in the MacBook Pro section, and I've received some replies from users that it worked for them:
    If the disk is not readable at this point, then it sounds like the disk is probably stuck against the bezel of your computer (like it missed the slot that it's supposed to slide out of).
    If you are not into taking risks, then get it serviced now. Removing a stuck disk should be covered under warranty (as well as checking the alignment of the drive).
    Otherwise, if you are adventurous, then keep reading.
    If the disk does not eject when you start up holding down the mouse button during startup, then it may be physically stuck.
    One example could be if the drive and the slot in the computer's case are slightly out of alignment.
    In that situation, the drive would have partially ejected the CD, and therefore it would no-longer be readable. So, the computer will not acknowledge that there is still a disk in the drive.
    But, if the disk is jammed against the edge of the case, then it may not be able to eject fully.
    There are methods to try and un-stick a CD that is stuck because of an alignment problem. But, neither is really 100% safe to try.
    1) You could try and slide something extremely thin between the CD and the drive's slit on the case to help guide it out. But, you risk damaging something if you don't do it just right. You could also make it worse.
    2) You could take a credit-card or another CD and try to re-seat the disk fully in the drive. The idea here is that if it is partially ejected, then this might help to fully seat the CD back into the regular location that it sits in when being read. This might enable the computer to read the CD again, and possibly eject it once it acknowledges that the CD is present. But, again this method could potentially cause further damage.
    My concern with the second option, is that you might miss the CD and push on something else. Likewise, if you exert too much pressure, you could force the disk into something further inside the drive. And, another concern is that if the drive does grab the CD and try to spin it before you release pressure, then you could cause another problem.
    Basically, these are only thrown out there for the truly adventurous. If that isn't you, then don't do anything outside of software controls and keyboard / mouse controls to eject the disk.
    The risk of trying one of the physical methods is that you might void a warranty that would otherwise have replaced the drive for you.
    Anyway, I hope my thoughts and ideas are helpful. Let me know if anything works for you.

  • Current Mac Mini Superdrive noise/vibrataion...Resolutions?

    I've got a Mac Mini that I purchased around September or October of last year, so it's the current generation that's in the Apple Store right now. When the drive spins up anywhere near full speed, whether reading or burning, the excessive noise and vibration makes it almost intolerable to stay in the room with it. It's definitely not "normal" by any stretch of the word. No disc burning has failed because of this, but it does seem to take excessive amounts of time to burn full discs. Also, this weekend I installed Adobe Creative Suite 5.5 on my 2008 Black Macbook and it took around an hour to complete the install. I did the same install from the same DVD on my current Mac Mini and after well over 2 hours of installing and only getting to about 60% progress, I gave up and went to bed while it finished. So same speed drive, close to the same processor, 4 times the RAM...and the Mac Mini takes at least 3 times as long to accomplish the same install. That's not acceptable at all. Granted, I don't use the drive all that often, but when I do I want it to work, and to work efficiently and properly.
    I've searched the discussions and see threads from over a year ago on this topic, but nothing recent. Wondering what the latest verdict is on these issues and if Apple has been replacing these as of late and/or has acknowledged the problem. I'm still within the standard 1 year warranty, but also have Applecare, so warranty is not really an issue. I've only found a couple people for whom Apple has fixed this (and then they just replaced the whole machine), and those have all said that the noise was not quite as bad, but that it was still not normal in the replacement machines, and even then that was after 2-3 replacements. I don't want to go through the hassle of replacing my machine multiple times and having to keep restoring from Time Machine backups only to have a machine that isn't quite as noisy. The noise I could honestly deal with if I had to (but I shouldn't), it's the excessively long read/write times that I can't accept. So any new news on this before I go to the trouble to take it to the Apple Store?

    Right, and that's what I would fully expect. However, I'm looking for people who have recently had the problem, have taken theirs in for repair (warranty or not) and if the issue was fully resolved or if it was still a problem, even if it wasn't quite as bad as before. If I'm still going to have the issue after a drive repair/replacement I don't want to waste my time taking it in and being without a machine for a few days. I want to know current experiences with the superdrives on the last gen Mac Mini.

  • HT5299 i have an apple cinema display circa 2005. what thunderbolt adapter do i need in order to be able to plug it into a current mac mini?

    I have an apple cinema display circa 2005. What Thunderbolt adapter will I need in order for it to work with a current model Mac Mini?

    see > I have an Apple Cinema Display ADC. What adapters do I need to hookup my ADC connected monitor to my Mac Mini.
    or > Using Older Apple ADC Displays with Mac Pro - The Mac Observer
    and > Thunderbolt and ADC: Apple Support Communities

  • Current Mac Mini and HD decoding

    Hi there,
    I am considering buying a Mac Mini as an HTPC to connect via DVI->HDMI to an LCD TV. I was wondering if any of you has experience in playing HD content on a current generation Mac Mini and how does the Mini cope with it. Please note that I am not talking about BluRay since the drive only supports DVD, but rather .MOV, .MKV or .AVI videos encoded at 1080p using codecs like H.264 or similar. Can the Mini decode those without missing any frames on a 1920x1080 LCD TV?
    Thanks in advance!

    480p seems to be the minis domain with H.264
    The processor hits 100% in spots and can find a safe cushion of 9% free CPU from time to time. It seemed to lock on fine at 24fps constant, with the smallest of climbs to 24.57fps on the BBC Motion Gallery Andes Film [848 x 480 resolution].
    Full screen locked on fine but I didn't have any fps readouts up. Only stuttered once for a short while, could have been the end of the download stream.
    Compression artifacting is still readily visible on this particular 480p encoding when viewed on the much sharper 2005FPW LCD monitor.
    This is why I primarily never saw the Front Row package ever being available for the current minis. Apple wants it to be a centrepiece for H.264 which the current graphics and cpu powered minis just aren't up for (H.264 pushes G5's and the fastest Intel CPUs to the wall as well when decoding.) Then again, a mini with all the extra hardware wouldn't be the mini I want. A low powered, silent beast that sips electricity and is perfect as a heavy web browser/email task oriented machine.
    --add a G5 and a faster GPU and you end up with an iMac which low and behold is what Front Row ships on
    Jan J.

  • Mac Mini i5 Radeon 6630M - Recommend LCD 22" Display?

    Hello, I have space to go up to a 22" widescreen LCD display.    Can someone recommend a 22" or so LCD display for this gen mac mini with Radeon 6630M video adapter that is good for font rendering?   (my current LCD doesn't seem compatible for good font rendering).

    ViewSonic, Sony, and NEC all make great displays.    As for font rendering a lot has to do with your:
    Apple menu -> System Preferences -> Turn off font smoothing for font sizes, and the fonts picked by your various applications.  The Color calibration in the Apple menu -> System Preferences -> Displays can also help. Always get a minimum 1080p display.  1080i resolutions aren't good for sharpness.

  • Mac mini won`t update and kernel panic

    Hello guys, I have a last gen mac mini running OSX 10.7.2.
    It`s not able to do any apple update since 1 month ago, and i have no ideia why.
    And since today morning it refuses to recognize my magic trackpad, when i try to use it i get a Kernel Panic.
    Here is the Panic report. Hope someone can help!
    Interval Since Last Panic Report:  -60 sec
    Panics Since Last Report:          4
    Anonymous UUID:                    FEA05E36-8BF6-43B9-81E5-5A4A7AA23D96
    Mon Mar 26 18:33:14 2012
    panic(cpu 2 caller 0xffffff80002c266d): Kernel trap at 0xffffff7f80e952ad, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000f58f00f, CR4: 0x00000000000606e0
    RAX: 0xffffff8008b34f00, RBX: 0xffffff800af1a400, RCX: 0xffffff806b9abb01, RDX: 0xffffff80002296b3
    RSP: 0xffffff806b9abb70, RBP: 0xffffff806b9abbc0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000010, R9:  0x0000000000000000, R10: 0x800000000f58f00f, R11: 0xffffff800063d400
    R12: 0xffffff80008df7c0, R13: 0x00000000e00002bc, R14: 0x0000000000000000, R15: 0x000000000000001e
    RFL: 0x0000000000010282, RIP: 0xffffff7f80e952ad, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x0000000000000000, Error code: 0x0000000000000000, Faulting CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff806b9ab830 : 0xffffff8000220702
    0xffffff806b9ab8b0 : 0xffffff80002c266d
    0xffffff806b9aba50 : 0xffffff80002d7a1d
    0xffffff806b9aba70 : 0xffffff7f80e952ad
    0xffffff806b9abbc0 : 0xffffff7f80e91ebb
    0xffffff806b9abc00 : 0xffffff800063a1b1
    0xffffff806b9abc60 : 0xffffff7f80e93495
    0xffffff806b9abc90 : 0xffffff7f80e90901
    0xffffff806b9abcf0 : 0xffffff7f80e8fdf1
    0xffffff806b9abd20 : 0xffffff7f80e90a62
    0xffffff806b9abd50 : 0xffffff800063a1b1
    0xffffff806b9abdb0 : 0xffffff7f80e956cd
    0xffffff806b9abe00 : 0xffffff8000654850
    0xffffff806b9abe50 : 0xffffff800029ef2d
    0xffffff806b9abe80 : 0xffffff8000223006
    0xffffff806b9abeb0 : 0xffffff8000214829
    0xffffff806b9abf10 : 0xffffff800021bb58
    0xffffff806b9abf70 : 0xffffff80002ae8a0
    0xffffff806b9abfb0 : 0xffffff80002d8383
          Kernel Extensions in backtrace:
             com.apple.driver.IOBluetoothHIDDriver(4.0.1f4)[1CEFD135-54B1-3B96-BAEF-62E4BCC3 6CD7]@0xffffff7f80e8e000->0xffffff7f80e9ffff
                dependency: com.apple.iokit.IOHIDFamily(1.7.1)[723A4767-80FF-3E7E-8383-FEBF3AF5F19E]@0xffff ff7f80adc000
                dependency: com.apple.iokit.IOBluetoothFamily(4.0.1f4)[AE68386A-1980-39F7-B13F-7C15FF3507AB ]@0xffffff7f80e19000
    BSD process name corresponding to current thread: blued
    Mac OS version:
    11C74
    Kernel version:
    Darwin Kernel Version 11.2.0: Tue Aug  9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
    Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
    System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
    System uptime in nanoseconds: 95778842652
    last loaded kext at 53439032985: com.apple.driver.AppleBluetoothHIDKeyboard          152.3 (addr 0xffffff7f8190a000, size 12288)
    loaded kexts:
    com.logmein.hamachi          1.0
    com.apple.driver.AppleHWSensor          1.9.4d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleBluetoothMultitouch          66.3
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMCCSControl          1.0.26
    com.apple.driver.AppleHDA          2.1.3f7
    com.apple.driver.AppleMikeyDriver          2.1.3f7
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.ApplePlatformEnabler          2.0.4d2
    com.apple.driver.AppleIntelHD3000Graphics          7.1.4
    com.apple.driver.AGPM          100.12.42
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.1
    com.apple.driver.AppleMuxControl          3.0.16
    com.apple.driver.AppleLPC          1.5.3
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
    com.apple.driver.MEDetect          1
    com.apple.driver.AppleIRController          312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.IOAHCIBlockStorage          2.0.1
    com.apple.driver.AppleFWOHCI          4.8.9
    com.apple.driver.AppleUSBHub          4.5.0
    com.apple.driver.AppleSDXC          1.1.2
    com.apple.iokit.AppleBCM5701Ethernet          3.0.8b2
    com.apple.driver.AirPort.Brcm4331          512.20.18
    com.apple.driver.AppleEFINVRAM          1.5.0
    com.apple.driver.AppleAHCIPort          2.2.0
    com.apple.driver.AppleUSBUHCI          4.4.5
    com.apple.driver.AppleUSBEHCI          4.5.5
    com.apple.driver.AppleACPIButtons          1.4
    com.apple.driver.AppleRTC          1.4
    com.apple.driver.AppleHPET          1.6
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.4
    com.apple.driver.AppleAPIC          1.5
    com.apple.driver.AppleIntelCPUPowerManagementClient          167.1.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1
    com.apple.driver.AppleIntelCPUPowerManagement          167.1.0
    com.apple.kext.MojoKDP          1
    com.apple.driver.AppleBluetoothHIDKeyboard          152.3
    com.apple.driver.AppleHIDKeyboard          152.3
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
    com.apple.driver.AppleMultitouchDriver          220.62.1
    com.apple.driver.IOBluetoothHIDDriver          4.0.1f4
    com.apple.driver.AppleAVBAudio          1.0.0d11
    com.apple.driver.AppleHDAHardwareConfigDriver          2.1.3f7
    com.apple.driver.DspFuncLib          2.1.3f7
    com.apple.driver.AppleUSBAudio          2.8.2f5
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOFireWireIP          2.2.4
    com.apple.iokit.IOSurface          80.0
    com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOAVBFamily          1.0.0d22
    com.apple.driver.AppleHDAController          2.1.3f7
    com.apple.iokit.IOHDAFamily          2.1.3f7
    com.apple.iokit.IOAudioFamily          1.8.3fc11
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleBacklightExpert          1.0.3
    com.apple.driver.ApplePolicyControl          3.0.16
    com.apple.driver.AppleGraphicsControl          3.0.16
    com.apple.iokit.IONDRVSupport          2.3.2
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.IOPlatformPluginFamily          4.7.5d4
    com.apple.driver.AppleSMC          3.1.1d8
    com.apple.driver.AppleThunderboltEDMSink          1.1.3
    com.apple.driver.AppleThunderboltEDMSource          1.1.3
    com.apple.driver.AppleIntelSNBGraphicsFB          7.1.4
    com.apple.iokit.IOGraphicsFamily          2.3.2
    com.apple.driver.AppleFileSystemDriver          13
    com.apple.driver.AppleThunderboltDPOutAdapter          1.5.8
    com.apple.driver.AppleThunderboltDPInAdapter          1.5.8
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.5.8
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.1
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
    com.apple.iokit.IOBluetoothFamily          4.0.1f4
    com.apple.iokit.IOUSBHIDDriver          4.4.5
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.driver.XsanFilter          403
    com.apple.driver.AppleThunderboltNHI          1.3.2
    com.apple.iokit.IOThunderboltFamily          1.7.4
    com.apple.iokit.IOFireWireFamily          4.4.5
    com.apple.iokit.IOUSBUserClient          4.5.3
    com.apple.iokit.IOEthernetAVBController          1.0.0d5
    com.apple.iokit.IO80211Family          411.1
    com.apple.iokit.IONetworkingFamily          2.0
    com.apple.iokit.IOAHCIFamily          2.0.7
    com.apple.iokit.IOUSBFamily          4.5.5
    com.apple.driver.AppleEFIRuntime          1.5.0
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          165.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          331
    com.apple.iokit.IOStorageFamily          1.7
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.4
    com.apple.iokit.IOPCIFamily          2.6.7
    com.apple.iokit.IOACPIFamily          1.4

    Can you remove BT from the area & use USB KB & Mouse?
    Do you have a 10.6 Install Disc to boot from for a test?

Maybe you are looking for

  • Can I use bind variable instaed of writing static COLUMN Name

    Hi , I am having a table containing id and column names, the data is stored against that id in other tables. Now I wish to update data into another table so that it goes into apppropriate column without using decode function. I am trying to do this:

  • Camera to iPod?

    Is it possible to download a digital camera directly to an iPod without a computer? Special adapter needed? iPod video   Mac OS X (10.3.9)  

  • Adding sound to the pages file

    Hi, Is there any way to add an audio file right after a sentence on a Pages document in a way that it stays in the same position after the it is exported to ePub? In iBA it is posible and it simply does not move after the book is released however in

  • BULK COLLECT INTO (Oracle 11 G)

    ORACLE 11G (The same code works fine in Oracle 9i) FETCH v_cursor BULK COLLECT INTO AuditData, AuditData1; the above statement gives me an error:- ORA-01007: variable not in select list ORA-06512: at "DEC0512.FCT_AUD_TRAIL_REAL_ENTRY_UPD", line 175 O

  • Removing duplicates that sync'd to iPhone

    forgot to fully remove all duplicate songs that resided on my Mac before I sync'd newly arrived iPhone. Then remembered, completely removed all duplicates on Mac and am not finding a specific sync instruction to allow Mac (10.5.2) music library to ov