Current itunes Track for non-ichat users?

hello,
well when i'm on ichat i put my status as current itunes track. However, my friends who dont have ichat or mac can not see anything. Is there away that they can see it in there aim buddy list.
Thanks!

Hi Littlemee,
Try iTunes Calling from the link on this page http://www.ralphjohnsuk.dsl.pipex.com/page5.html
11:11 PM Sunday; July 30, 2006

Similar Messages

Itunes hangs for non admin users

I've got itunes 10.6.3 running on 10.6.8 Macs which are joined to AD and OD for network authentication.
When starting itunes as anything other than an administrator (local or domain) itunes simply hangs - on the very first run you can Agree to the EULA but after that it hangs at the startup. Sometimes you get the authentication dialogue for our proxy server but not always.
I've checked and the proxy isn't even receiving any requests, and it works fine for an admin user. I've taken the proxy out of the users preferences and it still hangs.
So is itunes dead in the water for non admins, or do I have to resort to the Windows 95 days of making everyone an admin of the Mac?

Fgi42 wrote:
The backup destination is an OpenSolaris ZFS directory shared with netatalk.
That doesn't sound like a supported destination for Time Machine backups. See Apple's Disks that can be used with Time Machine.
You'll probably need to find someone familiar with the OpenSolaris OS.

How to allow access to winrs for non-admin user?

I have Windows Server 2012 (and Server 2008, but it is next priority) to monitor it using txwinrm. txwinrm library internally is using WinRS protocol. I have to monitor it using least privileged user, but don't know how to configure access for him.
All I managed to do - is to configure remote Powershell session for my user, but it's look like that winrs and powershell sessions have different security descriptors:
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential Administrator $pwd) -ScriptBlock { 2 + 2}
# gives 4
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential lpu1 $pwd) -ScriptBlock { 2 + 2}
# gives 4
winrs -r:192.168.173.206 -u:Administrator -p:$pwd 'powershell -command "2+2"'
# gives 4
winrs -r:192.168.173.206 -u:lpu1 -p:$pwd 'powershell -command "2+2"'
# Gives Winrs error: Access is denied.
Configuration for my user is following:
(Get-Item WSMan:\localhost\Service\RootSDDL).value
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1141)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)
(Get-PSSessionConfiguration -name Microsoft.Powershell).SecurityDescriptorSddl
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1149)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
(In each security descriptor my user is given general access to protected object).
So what security descriptor should I set to make my winrs query work for non-admin user?

Hi Bunyk,
I can not recreate the erroe you posted, and please also post the screenshoot in your convenience.
I tested with a non-domain user but has the local admin permission of the remote computer, and this worked, before running the remote cmdlet in powershell, I also configured the TrustedHosts.
In addition, the access denied could be also caused to the Protocol Filtering on the remote server, for more detailed information, please refer to this thread:
winrs error:access is denied
I hope this helps.

SQL tab not working in V2.1 EA1 for non-DBA users -- how to fix?

In v2.1 EA 1 the tab to show the SQL script (DDL) in the object browser is not working for non-DBA users. In the prior version, these users would see a message about DBMS_METADATA and then the message would indicate that an "internal generator" would be used to generate the DDL script. After that brief message the DDL would show up as expected. This doesn't seem to be the case in the newest version.
I issued the following two grants to a particular user which worked, but I am reluctant to issue the grants to "PUBLIC".
SQL> grant execute on DBMS_METADATA to XXXXX;
SQL> grant select_catalog_role to XXXXX;
So, my questions are:
1) Will the old functionality (that didn't require these privileges) be added to V2 at some point?
2) What security implications are there for issueing the above grants to PUBLIC?
NOTE: After granting execute on the DBMS_METADATA package, it still didn't work. I left that grant in place and granted SELECT_CATAOG_ROLE, so I can't say for sure that the 1st grant was required.
Edited by: user615070 on Nov 19, 2009 9:30 AM
Edited by: user615070 on Nov 19, 2009 10:06 AM

An OEM account is separate from the database account. You need to use OEM UI to create an OEM account, however, for certain tasks to be done in the databases which OEM is monitoring they will also require separate database accounts within those databases. For example, to view the performance tab in OEM UI, a database account is required.
OEM only has two types of users, i.e. Super Administrator and Administrator, but don't go by the names. You can grant an OEM 'Administrator' account access to specific targets and what they can do within OEM, such as only viewing reports, targets, and so on. For access within a database, the user created need not be a DBA either.
I hope you understand.

Acrobat 7 requires admin password at every launch for non admin users?

acrobat 7 requires admin password at every launch for non admin users?
any one with a solution or similar problem?
thanks for any help.

I've been avidly following all of the threads regarding this issue...yet none of the solutions have worked for me. I've got 11 Mac users that do not use the Creative Suite..only Acrobat, Quark, etc. I've tried installing and re-installing through both Admin and User accounts, I've tried the AdobeBib XML change, I've tried enabling Root and installing, changing permission on the Acrobat folder, etc. all to no avail. I still get asked for Admin Authentication every time Acrobat and Distiller are opened (except on the Admin account side). This is happening on one particular Mac (G4, 1GB Ram, OS 10.4.3) for both Acrobat Standard 6 and 7 as well. The biggest issue that also happens in tandem with the Acrobat installs is the inability to print from Quark. I get the following error when printing: "The process "pictwpstops" terminated unexpectedly on signal 6." Because of the necessity to print Quark documents, I have uninstalled all Acrobat on the machines until we can get a fix. This resolves the printing problem with Quark. The only option left is to set up all users as Admin accounts - which I really do not want to do. Any other suggestions out there? I've got more information available if needed.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

It is the same installer. You can run it as 30-days trial (CC version) and decide later for CC or stand-alone. To license as stand-alone, follow this guide.
If you already have the LR6 license key, you can enter it during setup and do not need to follow the guide.

Can I burn photos onto a DVD/CD for non-Mac users?

Can I burn photos onto a DVD/CD for non-Mac users?

You can burn a plain CD/DVD by just dragging the photos there; but, that may or may not be playable by everyone. To be sure that the result would be playable in any computer or CD/DVD player, it would be better to use either one of the apps already on your system - such as iPhoto. I don't use that myself - I use other third party software - but take a look at iPhoto help. And, you could make it more interesting by creating a slideshow - also in iPhoto, or iMovie. To give it the final cool touch, bring it into iDVD to give it a polished look if you'd like. You can burn it then from any of the above.
If you happen to have Toast (an excellent burning app), you could use that as well (that is my preferred way to work). In Toast, you have multiple choices: burn a data CD/DVD for Mac only, for Mac & PC, etc, burn a picture CD, video DVD, etc, etc.

How to hide the page ribbon and quichlaunch for non admin users

HI
1 ) how to hide the ribbon in a page in sharepoint 2010 for non administrator users
2) how to hide quicklaunch also for non admin users
in quick lanuch i want to hide links for all site content also.
i used Document Center Template to create my web application.
adil

HI
i did not get how i use this control
<Sharepoint:SPSecurityTrimmedControl
runat="server"
PermissionsString="FullMask">
2
  <div>
3
    <SharePoint:SPLinkButton
id="idNavLinkViewAll"
runat="server"
NavigateUrl="~site/_layouts/viewlsts.aspx"
Text="<%$Resources:wss,quiklnch_allcontent%>" AccessKey="<%$Resources:wss,quiklnch_allcontent_AK%>"/>
4
  </div>
5
</SharePoint:SPSecurityTrimmedControl>
adil

User Interface Access Customisation for non admin users

Hi,
It is understood that for non-admin users, some features of the Planning Interface is not enabled and this can be controlled by proper access permissions. But, is it possible to extend the customization to provide some additional features in the menu bar for an user?
For example, if View User wants to manage task lists. Is it possible by some sort of customization? Please advise.
Thanks.

Hi,
You can create right click menus, and you can also create links on the tools page. Would any of these help you?
Here is the doc on those subjects:
Creating and Updating MenusAdministrators can create right-click menus and associate them with data forms, enabling users to click rows or columns in data forms and select menu items to:
Launch another application, URL, or business rule, with or without runtime prompts
Move to another data form
Move to Manage Approvals with a predefined scenario and version
The context of the right-click is relayed to the next action: the POV and the Page, the member the user clicked on, the members to the left (for rows), or above (for columns).
When designing data forms, use Other Options to select menus available for Data Form menu item types. As you update applications, update the appropriate menus. For example, if you delete a business rule referenced by a menu, remove it from the menu.
To create, edit, or delete menus:
Select Administration, then Manage, then Menus.
Perform one action:
To create a menu, click Create, enter the menu's name, and click OK.
To change a menu, select it and click Edit.
To delete menus, select them, click Delete, and click OK.>
Specifying Custom ToolsAdministrators can specify custom tools, or links, for users on the Tools page. Users having access to links can click links from the Tools menu to open pages in secondary browser windows.
To specify custom tools:
Select Administration, then Application, then Settings.
For Show, select Advanced Settings.
Click Go.
Select Custom Tools.
For each link:
For Name, enter the displayed link name.
For URL, enter a fully qualified URL, including the http:// prefix
For User Type, select which users can access the link.
Click Save.

What is current CommSuite support for non-ASCII passwords?

Hello all,
Some of our users managed to change their passwords to non-ASCII strings (via replication from MSAD by ISW) and no longer have access to their communications services.
While replicating the problem, I have set a (UTF-8 non-ASCII) string as my password in DSEE directly, and *can* log in to Convergence with this password. However, if I change the working password to a non-ASCII string from Convergence itself - it is accepted during the secondary password check, there is no error returned, SOME password is apparently saved into the LDAP directory, but neither of the original non-ASCII plaintext strings can be used for login back into Convergence. Restoration of access is only doable by admin at this point.
Checking email by IMAP from Thunderbird no longer works with a changed non-ASCII password (including the state when it still works for Convergence).
Delegated Admin has an explicit check for non-ASCII characters in the password and refuses to set a misbehaving one.
I see that among the standards supported by CommSuite, there is IMAP4rev1, and RFC 5255 refers to it as the reason that non-ASCII passwords and usernames are for now not supported, though this is expected to be a temporary state of things, and software can prepare for the future by implementing checks for valid UTF-8 strings as well.
https://wikis.oracle.com/display/CommSuite/Messaging+Server+Supported+Standards
http://tools.ietf.org/html/rfc5255
5.1. Unicode Userids and Passwords
   IMAP4rev1 currently restricts the userid and password fields of the
   LOGIN command to US-ASCII. The "userid" and "password" fields of the
   IMAP LOGIN command are restricted to US-ASCII only until a future
   standards track RFC states otherwise. Servers are encouraged to
   validate both fields to make sure they conform to the formal syntax
   of UTF-8 and to reject the LOGIN command if that syntax is violated.
   Servers MAY reject the LOGIN command if either the "userid" or
   "password" field contains an octet with the highest bit set.
   When AUTHENTICATE is used, some servers may support userids and
   passwords in Unicode [RFC3490] since SASL (see [RFC4422]) allows
   that. However, such userids cannot be used as part of email
   addresses.
So, the main question at this point is: does or does not all of the CommSuite stack support non-ASCII passwords?
If no - please confirm, so we can instruct the users to not create problems for themselves (and maybe manage to set up some policy to not accept non-ASCII passwords to MSAD/DSEE in the first place).
If yes - what should be done to enable support in Convergence/IMAP/SMTP/XMPP/WCAP/WABP/... services - perhaps, setting the LANG/LC_ALL locale environment variables or equivalent JVM flags for UTF-8 in server startup scripts, etc.? (I know that DSEE ldapsearch requires either envvars or a command-line flag for charset encoding of values, so I figure similar quirks may be relevant for some other software)
Thanks in advance for either response,
//Jim Klimov

I can't respond for the suite, but the Messaging Server product should work with UTF-8 usernames and passwords as long as the standard SASL authentication mechanisms that are documented to use UTF-8 are used (e.g. SASL PLAIN). IMAP LOGIN may work fine with UTF-8 as well even though that's non-standard. We do not implement SASLprep, however, so the strings provided by the client to the server must be identical UTF-8 strings for authentication to succeed. If they are provided in a different decomposition, different canonical form or non-standard charset, that's not supported and will fail. We don't test this scenario extensively, so you may encounter bugs (that we'd have to prioritize and fix as with other bugs). Messaging Server recently implemented a restricted option (broken_client_login_charset) for a customer who was stuck with broken clients that sent ISO-8859-1 for the IMAP login command arguments.

Generic Object Services - View Attachments disabled for non admin user

Hi,
I am using SAP 4.7 and the attachments created using table TOA01 - archive link are visible to an administrator user through Generic Object Services toolbox while same View Attachments option appears disabled for other non admin users.
Kindly help !

Hi Neha,
I'm sorry I don't have answer to your question but I wonder if you could help me.
I'm looking at OSS note 530792 to configure GOS 'create attachment' option to copy the attachments to the archive server. currently, these are written to the SAP office tables SOC3, SOFFCONT1, etc and I want to use the archivelink and SAPHTTP and copy to the archive storage.
Have you successfully managed to configure your system since you mentioned TOA01?
In the same GOS menu I've activated the 'Business document' option and can copy these to the archive server by correctly configuring OAC2 and OAC3.
I'll really appreciate of you could please share your knowledge.
Thanks.
Soyab

Why can't Apple make 'publish changes only' for non .mac users?

The recent iWeb update to 1.1 and the now increasingly obvious differential between .mac and non .mac features has prompted me to post here today.
I can understand comments, passwords and search facilities being a .mac only experience because it requires server side technology. I can also understand that .mac users get enhanced features like slideshows as well.
But why is the fundamentally *basic* option to 'publish the changes only' not available to non .mac users?
I know uploading to .mac uses a different protocol to uploading via FTP, but I don't think it is about that. Obviously the software engine in iWeb 1.1 can now track the pages that have changed, and flag those for uploading. So if the facility to do this is not available with non .mac uploading, is this some form of crippleware? Can any software engineers comment on this or am I talking off the top of my head? [And please mods, don't delete this post - I use the word 'crippleware' in its harshest form, clearly I can still use iWeb to make fantastic websites - I am asking a technical question here.]
Michael
A Trusty Quicksilver G4 Dual 1GHz

OK, from reading this thread:
http://discussions.apple.com/thread.jspa?threadID=486335&tstart=0
There is a pattern: An error occurred while publishing file “/blah/blah", while file "/blah/blah" seems to be random from one person to the next, but they all share one thing and that is communication protocol.
For iWeb to be able to publish changes to .Mac, it has to:
1. identify if the file exists
2. do the following:
2a. if not exists, copy it to .Mac
2b. if exist, do some sort comparison - CRC checksum -
2b1. if checksums match, don't copy
2b2. if checksums don't match copy it to .Mac
At least I think that's what going on, I don't have .Mac so that is best I can think of. Perhaps, some Apple SW engineers can jump in here.
Now, the bad part is iWeb has to (and I'm assuming iWeb uses WebDAV):
1. go thru each file locally
2. crawl its way into .Mac (WebDAV is a slow protocol) to find the the counter part.
3. when it finds a file that matches a client side file, it has to (some how) do checksum on-the-fly across the net work (which is slow and congested)
#3 is I think where it failed, there are many factors here: 1) networks congestion 2) latency 3) protocol overhead 4) checksum calculation time etc...
iWeb eventually times out because any/all of the above.
It's nice that WebDAV can author to the host yada, yada, but it's so SLOOOOOW.
What I would do is for every publishing, I would build a files and their checksums keep it on the host (or local, must be hidden).
For subsequence publishing, I would (use a fast protocol like FTP) download this pre-built files/checksums list. Locally, do a full publishing, making checksum comparison, the result is delta changes; upload only those. Build a new files/checksums list upload that too.
What I mean to say is offload everything that is possible to local machine, bandwidth is PREMIUM!

Publishing iCal calendars for non iCal users?

Firstly I guess I should set out the ideal solution I want to acheive.
I am looking for a way to publish calendars from iCal to my hosting server which will be viewable by PC/non iCal users via a web browser. I'd have to do it via ftp as my servers do not currently support WebDav.
Currently I have managed to publish the calendars which are viewable via a browser which appear as a list of code rather than as a calendar.
Is there a way to do this using iCal or, dare I mention, another calendar/organiser software package?
PowerMac G5 2.5Ghz Dual + G4 1.67Ghz Powerbook 1Gb RAM Mac OS X (10.4.10) 20Gb 1st Generation ipod still working well!

Hello Julian,
Thanks for this. Excellent solution and pretty straight forward to set up. Wish I'd had this years ago.
Cheers again
Anthony

QuickTime fails to initialize for non-admin users (Error 63441)

I have installed iTunes 6.0.4 (including QuickTime 7.0.4) on my XP PC. iTunes and QuickTime work fine for the Admin users, but not for non-Admin accounts.
iTunes crashes with the generic Microsoft 'send error report' message; QuickTime gives "QuickTime failed to initialize. Error # 63441".
Any help / suggestions appreciated.

Eventually fixed it!
As mentioned in numerous other posts this came down to an issue with registry keys.
Updated the permissions for HKEYLOCALMACHINE\SOFTWARE\Apple Computer, Inc.\QuickTime to give 'Full Control' to 'Everyone'.
Initially had a lot of difficulty accessing the Apple Computer, Inc. branch - kept getting 'access denied'. This turned out to be because there was no owner set for the key. Once I had made myself owner I was able to make the other changes.

Using mms.cfg file to enable Autoupdate for non-Admin users

I need help in getting this to work. So far it does not.
Adobe Flash for windows 17.0.0.23
Windows 7 Enterprise - 5000 systems
Users are not administrators on systems.
The Non admin user gets prompted with a screen ( we do not want any prompts)
Then the install fails because they are not an administrator.
My mms.cfg file:
AutoUpdateDisable=0
AutoUpdateInterval=1
SilentAutoUpdateEnable=1
How do I use this or any other method to have Adobe Flash update automaticly for all users including non-admins
and give no prompts?
What are the next steps. Is there an enterprise support site or method to use for mass distributions for Flash?
Please Get back to me today before 12:00 EDT 13 Apr 2015.
Gary Pearson
401-233-6898

Hi garyp81126656,
The current mms.cfg file configuration will perform either a notification update or a background update. There are a few options to update non-admin users:
Host the background update resources locally. When using the Adobe servers for background updates there is no way to disable notification updates. By hosting the background update resources locally users will never be prompted to update.
Disable updates and deploy Flash Player updates via SCUP, SMS, or Group Policy.
You can find the various deployment options are listed in Chapter 3 of the Flash Player Administrator's Guide. The Admin Guide also contains information to license Flash Player for distribution within your organization, which is a requirement for any of the deployment methods described in the Admin Guide. Additional information is available at An outline of Flash Runtime installation options
Maria

Current itunes Track for non-ichat users?

Similar Messages

Maybe you are looking for