Current List of CC Fico Providers

Anyone else is welcome to throw in their knowledge of other companies that include free FICO scoring with their credit card membership. Currently what I have so far. Discover Card // Transunion CR Citi Card // Equifax CRBarclay Card // Transunion CR Pentagon Federal // FICO NextGen Score Chase Slate // Experian CRWalmart // Transunion CRUSAA // Vantage Score CRMerrick Bank // Transunion CRFirst national Bank of Omaha // FICO 8 Bankcard Score from Experian I think Amex has started provide experian for some members with CBP however I am uncertain at the moment as I have a CBP and unable to access a Fico. Anyone else got any to add?

travisr0 wrote:
Anyone else is welcome to throw in their knowledge of other companies that include free FICO scoring with their credit card membership. Currently what I have so far. Discover Card // Transunion CR Citi Card // Equifax CRBarclay Card // Transunion CR Pentagon Federal // FICO NextGen Score Chase Slate // Experian CR I think Amex has started provide experian for some members with CBP however I am uncertain at the moment as I have a CBP and unable to access a Fico. Anyone else got any to add?Walmart has transunion as well its exactly same as discover from what i can tell

Similar Messages

How to send current list item URL in email by using sharepoint 2010 workflow?

Hi All,
I had created sharepoint workflow usind SPD 2010. when new item is created it sends the email with link. But it sends current list link not the current item link.
I tried to use Encoded Absolute URL but this like
http://asdf.com/Lists/abc/10.00
but i need something like this
http://asdf.com/Lists/abc/DispForm.aspx?ID
I have grow thorough some post and i found that,
Statically i can write http://asdf.com/Lists/abc/DispForm.aspx?ID= and from Add lookup i can get ID by choosing current item.
The link which i get is partially hyperlink like this
http:aasdf.com/Lists/abc/DispForm.aspx?ID=10 (here 10 is not hyperlink)
when i copy and paste this link it works fine but by clicking it i am not getting true result.
Please help me to solve this issue.
Thanks.

Hi Raymond,
It works for me. Thank you so much.
I also have another issue related workflow. If you can help me, i really appreciate you.
I already configured AAM. I have two Share Point Address which are:
Default : http://default.com
Internal : http://intranet.com
I have List workflow using SharePoint Designer 2010. When new item get create, it sends email to person for approval. But when it sends email it sends Dafault zone URL.
Dafault zone URL is only accessible through Virtual Machine. We cant access from local machine. So i need to send intranet zone URL in email so user can open through local machine.
I tried it but i can only able to do for one list. I have to so this general for every list.
How can i send intranet zone URL?
Swapping the zone URL is not solution for this issue because after swapping situation is same.
Thank You.

How can I get an item and it's attachments from the current list using SP's JavaScript Client Object Model on newform.aspx?

I only recently learned/read about SharePoint's JavaScript Client Object Model. I'm reading online trying to figure this out but not having much luck.
On newform.aspx (and dispform.aspx) I want to get the
current list,
the last item created, and it's attachments. I now the CAML query I need to get the last item created, but first I have to get the current list and I am not sure how to do that.
I tried this but it returns null:
SP.ListOperation.Selection.getSelectedList()

Hi,
For your issue, you can get the list name from the new form url and retrieve the list last created item :
https://social.msdn.microsoft.com/Forums/office/en-US/b90a64f8-2255-41b0-9d91-78335dd4a4cf/get-list-name-from-list-url-through-javascript?forum=sharepointdevelopmentprevious
http://msdn.microsoft.com/en-us/library/office/hh185007(v=office.14).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

HTTP servers inside /etc/pacman.d/current list?

Hello,
Does anybody know the arch servers working throw HHTP :80 ( not FTP: 21) which I can use at the /etc/pacman.d/current list ?
Thanks a lot.

Thank you very much shining. I have found one server which is ok for me. It is even have emacs-cvs at the community repo.
mouse256 I am not a big pro at networking and because of that I can't understand what wrong witn my NAT routing right now. I just found throw testing that I can not connect o ftp://repo and can connect to http://repo. Tnat is why I need it before I will understand what is the problem with my routing.

The name of the current list item

hi
i have a table that stores the users names and the available button for him (list item)
i want to create a function that returns a value
in the display condition of the list item to show or hide the item .
my function should receive two parameters one of them is the current user which is the :APP_USER. variable and the other parameter is the current list item which its display condition execute the function .
so how can i get the current item ?
thanks

Ayman,
You could hard-code it in each function call within each list item's condition.
Scott

Get current list of programs in used

Hi,
Is there a function module can I use to get the current list of programs or tcode being used? What I mean is that a user started tcode - CL02, I need to create a report that is showing that CL02 is being accessed by that user.
Thanks.

Hi Janet,
Please refer the below thread(s),
Transaction to get list of all transactions used by a user during a period
Re: Pulling the history of the user for list of transactions used
Best Regards.

Can't get rid of old bookmark list for current list to save for backup

My computer was infected with malware and crashed in November. I lost everything but was able to get my bookmarks back with a jump drive.
I then went in and removed a lot of bookmarks and folders, and have added a lot of other folders and bookmarks over time. I do mean a lot.
I am now trying to make a current back up, but every time I try to export it to html format it reverts back to the original list that was edited to the current list, which I can see, and even though it does light up when I select all, it again reverts back to the original list for export, and will not show the list as is now.
Am curious why the original list is even here, as it should of disappeared when the computer crashed, so how can it still be here is another question, but this is not my main question of course.
How do I get rid of the original list and get it to export the current list for back up? PLEASE! Once bitten twice shy.
Running XP Professional on a Sony Vaio 2002.
I have tried to make a copy in a word doc but cannot get it to "copy" to paste to put it into that format.
Thank you in advance, Trisha

I'm still unclear what is happening when you export.
This article has the steps to export bookmarks to an HTML file: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]].
Are you saying that the file you export contains the old bookmarks that you removed, or the old bookmarks reappear in Firefox when you try to export??
The JSON format consists of text, but isn't meant to be easily read. Its real purpose is to be restored back to Firefox is you lose your bookmarks. So it is a convenient backup format.
I can understand that you aren't sure what it contains. If you'd like to see how it restores, you can copy the .json file to a convenient location (e.g., thumb drive or documents folder) and restore it into a new Firefox profile.
This doesn't replace your existing Firefox settings, but would be an independent settings folder that exists alongside it. You can create and switch between profiles for testing, to isolate different users, or other purposes. Just don't delete any profiles without backing up the ones you really care about, just in case something were to go wrong during the process.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
Any time you want to switch profiles, exit Firefox and return to this dialog.
When creating a new profile, I recommend using the default location suggested, and to avoid data loss, not re-using any existing folder.
Once you get the new profile with its default bookmarks, you can restore your last .json backup to see what it includes. This is where the "convenient location" comes in: when using the steps in the following article, you will use "Choose File" to locate that .json file. [[Restore bookmarks from backup or move them to another computer]].

What is system variable to find the current list line in list processing

hi
what is system variable to find the current list line in list processing

Hi,
Please find below the system variable related to list processing
LILLI    INT4     10     Processing lists       List line selected
LINCT INT4     10     Creating lists           Page length in a list
LINNO INT4     10     Creating lists            Current line
LINSZ INT4     10     Creating lists          Line width in a list
LISEL CHAR     255     Processing lists       Contents of the chosen line
LISTI    INT4     10     Processing lists       Index of the chosen list
Thanks,
Muthu.

Getting folder from older bookmarks list into current list

Through syncing between Safari on my MacBook Air and my iPad I lost a folder in my bookmarks list that is important to me. Through Time Machine I've recovered a version of the list that has the missing folder. I don't know how to get the folder into the current bookmarks list. Help appreciated.
Bookmark creation and editing of bookmarks is one area where Safari could in my opinion be significantly improved: The display of the bookmarks list when adding a bookmark is confusing and difficult to negotiate; there is no provision for sorting the bookmarks list; provision for editing the bookmarks list is primitive and cumbersome.
The value of having a backup bookmarks list is limited if the only thing you can do is replace the current list with the backup. It should be possible to move bookmarks and folders between the backup and the current list.

Thanks. I used Xmarks once, way back.
I find syncing of bookmarks through syncing of Safari through iCloud VERY confusing. With syncing activated, it is impossible to edit the bookmarks list on any device. As soon as you make a change, syncing converts it back to what's on the other devices. Even shutting the other devices down doesn't prevent that from happening.
I was able to edit the list on my MBA just now only by shutting wifi off, creating a copy of the edited list once I was done so if syncing overwrote the edited list I wouldn't have to do it all over again. When I turned wifi back on the changes persisted and have apparently been updated to my other devices.
Also confused about possible interaction between syncing through Xmarks and iCloud.
I can recover an older copy of my bookmarks list using Time Machine. But if I simply overwrite the current copy with the older one I lose any changes made since the last Time Machine backup.
So--I think--my question--how to get a folder from an older list into a newer one--is still unanswered.

List of InDesign Service Providers?

Posted by Marc Madenwald... [Updated July 29, 2003]
Hello,
There is an online directory of print service providers who support Adobe InDesign located at: http://partners.adobe.com/asn/partnerfinder/search_service.jsp
If you can not find a print service provider in your area or your current provider does not accept InDesign files then Adobe would like to work with them to ensure they can support you. Please help Adobe contact them by completing the form located at: http://partners.adobe.com/asn/partnerfinder/findspform.jsp
If you are a print service provider and would like to be included in the online directory you can register for free with the Adobe Solutions Network (ASN) or apply to become an ASN Adobe Authorized Service Provider at: http://partners.adobe.com/asn/service/benefits.jsp
A PDF brochure about the Adobe Solutions Network Print Service Provider Program is posted at: http://partners.adobe.com/asn/service/PDFS/ASN_PSPP_NA_DS.pdf
Print Service Provider who are interested in learning more about supporting Adobe InDesign (or InDesign customers who want to get this information to their service provider) should visit the resources available at: http://partners.adobe.com/asn/service/indesign/index.jsp
These resources include:
A FREE InDesign Print Service Provider Toolkit:
http://web3.kpcorp.com/adobeASN/form.asp
The InDesign 2.0 Printing Guide for Print Service Providers:
http://partners.adobe.com/asn/service/indesign/PDFS/ID2_Printing_Guide.pdf
If your service provider doesnt have InDesign so they cant support output of your files, let them know that they can order a 30 day fully functional trial version at http://www.adobe.com/products/indesign/tryindesign.html
If you are looking for more advanced training options please search the online directory of Adobe Certified Training Providers located at: http://partners.adobe.com/asn/partnerfinder/search_training.jsp
Best regards,
Marc

Hi Max,
Thank you for your quick response. I have attached a couple of screenshots, which should hopefully help to explain what I mean. In service designer it is possible to define extensions, one of which is 'service attributes'. When we define imageURL1, then put an image url in the individual service, the image automatically gets shown on the service details page, with no further customisations needed. We were wondering if there are any other service attributes that work like this, i.e. can be defined and have a certain behaviour automatically associated with them, or imageURL is the only one? If there are others do you know where we could find a list of them?
Many thanks,
Richard

Current list of all SAP modules and sub-modules

Can anyone point me to a current and comprehensive list of all available SAP modules and sub-modules? Currently, the best source I have found for this list is SAPNote 36677, which lists all the structure of components for customer incidents. However, this SAPNote list is over 23K line items and includes information outside of the modules and sub-modules, in a format that is difficult to normalize.

Eric,
a similar question was posted in this link: http://scn.sap.com/thread/3652322
Assuming you are looking for an overview on the modules for the SAP Business Suite, personally I like the list in the SAP help
Also a valuable resource is the SAP Release Strategy webpage, which provides link to the Solution Explorer, which shows the available modules by LoB Line of Business or Industry solution, and the official Product List called PAM Product Availability Matrix, which is pretty technical.
thank you
erich

List of SD ,FICO and Retail cubes and Reports

Hi,
I need list of Cubes and Reports related to SD,FICO and retail.
<removed by moderator>
Regards,
Shiva Kumar G.C
Edited by: Siegfried Szameitat on Nov 12, 2008 11:21 AM

Hi,
Goto BI content in RSA1 and you will be able to see the list of Queries and Cubes related to the SD and FICO modules.
Actually it's too long to type all the details here
Regards,
Balaji V

Current Listing of of compliant Firefox 4 EXTENSIONS & PLUG-INS

'''It would be convenient to have a listing or a way to filter through all EXTENSIONS & PLUG-INS that are currently suitable for Firefox 4. When I tried the beta, I found too many of my favorite extensions were incompatible at the time.
What's the easiest way to find out whats truly available for Firefox 4 ????'''

Though not comprehensive, the following list shows the compatibility of many popular add-ons - https://addons.mozilla.org/en-US/firefox/compatibility/report
When you search on the add-ons site, you can choose to only display add-ons that work in Firefox 4 by selecting 4.0 in the "Compatible with" section in the left hand column.

Current list of traded in games possible?

Often times when I do trade ins, my local bby, doesn't give me a receipt and at least once failed to give me my 10% bonus and 2x rewards points.
That's not my problem, I do not recall what all games I've traded in, and Do not want to go over the limit, thus I am asking if its possible to pull up a complete list of trades.
I look in my transactions but its not as helpful as I'd like because I know not all trades are listed there, and some games are just listed by title and not platform and title.
I was pretty sure the limit on trades is 3 of the same title, per system, per year.
And frankly I'd rather not exceed the limit and be punished.
I wish I could say that my life was simple enough I could just remember it all, but not so much actually.

Hi BobSmith007,
Thanks for choosing Best Buy for your game trade-ins!
At the current time, I don’t believe the functionality exists to show you a fully detailed list of previously traded in games at Best Buy. As everyone else has mentioned, holding onto your receipts is going to be your best option for now. With that said, our systems are constantly evolving, so this functionality may very well be implemented down the road. As far as the limitations go, you are correct in saying that it's three of the same title, per system, per year.
With that, I do regret hearing that you may have run into a few hiccups when attempting to get your receipt. There should be absolutely zero issues in receiving a receipt for a trade-in completed at Best Buy. I sincerely hope you don’t run into any problems in the future with this.
I appreciate your question, as well as your feedback here!
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Provider not listed in Linked Servers Providers (Visual FoxPro Ole db)

I'm trying to set up a linked server to a VFP database. I have downloaded, and installed "Microsoft OLE DB Provider for Visual FoxPro 9.0" I did read the Installation instructions about previous versions - there were none.
After installing, I launched SSMS and tried to create a Linked Server, but the VFP Provider is not listed.
I made sure the vfpoledb.dll was registered by running 'regsvr32.exe fpoledb.dll'. Launched SSMS - Provider still not listed.
I have uninstalled and re-installed the OLE DB Provider. Logged in as Administrator. SQL Server 2012
What do I need to do to get VFP to show up in the Providers list?
Thanks,
Mike

Hi mbailey218,
Since you didn't mention your SQL Server 2012 is 32-bit or 64-bit, I assumed it as a 64-bit version.
Did you download the Microsoft OLE DB Provider for Visual FoxPro 9.0 from
here? It is a 32-bit oledb provider which means it can work with 32-bit SQL Server only.
As far as I know there's no 64-bit version OLE DB Provider for Visual FoxPro, so you may take either workaround below.
Working with 32 bit providers and 64 bit SQL Server
use a 32-bit version SQL Server 2012(the last option you may choose)
If it is 32-bit SQL Server you installed, please confirm and provide your SQL Server version details and the version of the OS where your database is hosted so that we will look into the specific scenario.
Eric Zhang
TechNet Community Support

Current List of CC Fico Providers

Similar Messages

Maybe you are looking for