Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Similar Messages

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Applying oracle patch set for Oracle 10.2.0.4

Hi All,
I need some clarification on below suggestions from SAP,
<div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
It is mandatory to install the most current available SBP in SAP environments.</div>
I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
Regards,
Ramesh.

ramesh_basis wrote:
Hi All,
>
> I need some clarification on below suggestions from SAP,
>
> <div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
> SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
> It is mandatory to install the most current available SBP in SAP environments.</div>
>
> I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
>
> I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
>
> Regards,
> Ramesh.
Hi Ramesh,
Firstly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> OPatch" then download and install OPatch_10205_Generic_v0.zip
Secondly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> Generic (32-bit / 64-bit)" then download and install "Pre-Upgrade Information Utility utlu102i.sql (zipped)" and "p8350262_10204_Generic.zip"
Thirdly, "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> AIX5L (64-bit)" then download and install "SAP_102048_201106_AIX.zip"
You can find readme fles in the zip files.
Best regards,
Orkun Gedik

Install the latest patch set for Oracle 10.2.0.4.0

I install SAP PI 7.1 EHP1 on Windows Server 2008 (RC1).
I already installed Oracle DB software 10.2.0.4.0
Now I would like to install the latest set for Oracle 10.2.0.4.0
I downloaded the following files from Service Marketplace:
- p8559467_10204_MS_WINX8664.zip
-p7592030_10204_WIN_GENERIC.zip
- Opatch_10204_Generic_v5.zip
- and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
Question:
1) What is the procedure/order to install the patch set?
2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
Thank you!

> - p8559467_10204_MS_WINX8664.zip
> -p7592030_10204_WIN_GENERIC.zip
> - Opatch_10204_Generic_v5.zip
> - and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
That one is for updates 10.2.0.<4 to 10.2.0.4. Since you are already on 10.2.0.4 that one is no more necessary.
> 1) What is the procedure/order to install the patch set?
> 2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
See Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4
Basically you will
- patch Opatch
- unzip the patch to a directory where <sid>adm has access
- stop all Oracle Services
- then execute opatch apply
Markus

Latest patch set for oracle client 8.1.7

hello,
what is the latest patch set exactly for oracle 8.1.7.xx? I know that this version is desupported but I need this client for a third party application that we have in use.
thanks
katharina

Patch 2376472 is the latest patch set for 8.1.7 which will bring you up to 8.1.7.4. It is still available on Metalink.

Oracle Critical Patch Update for Oracle Database 10g Release 10.2.0.3.0

Hi,
The [ Oracle Critical Patch Update for April 2012 was released on April 17th, 2012|http://www.oracle.com/technetwork/topics/security/cpuapr2012-366314.html] , wherein it was stated that below list versions will get affected.
Oracle Database 10g Release 2, versions 10.2.0.3, 10.2.0.4, 10.2.0.5
Currently I am using
BANNER
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
Can anyone tell me, difference between
Oracle Database 10g Release 2, versions 10.2.0.3 with Oracle Database 10g Release 10.2.0.3.0
I am much concerned whether to apply patch for 10.2.0.3.0, wherein the affected version is Oracle Database 10g Release 2, versions 10.2.0.3
Thanks,
Sam

user12983673 wrote:
Can anyone tell me, difference between
Oracle Database 10g Release 2, versions 10.2.0.3 with Oracle Database 10g Release 10.2.0.3.0There is no difference -- you use version 10.2.0.3 which is affected by last CPU.

Patch set for 11g database.

From where can I download the patchset for oracle 11g database?
Regards,
Atif Iqbal

Any patchset for 11g release 1/2You can download 11gR2 (11.2.0.2.0/11.2.0.1.0) or 11gR1 (11.1.0.7.0/11.1.0.6.0) directly from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html and you do not need to apply any patchset on top of it.
and also the meta notes access.Since you do not have a CSI number, I believe this will not be helpful -- We cannot post the contents of MOS (Metalink) docs since this violates Oracle support agreement policy.
Thanks,
Hussein

Patch set for oracle-8.1.5

Hi,
Does anyone know where can i get patches for bug:883333 ==> import error where schema contains synonym.
FYI, I'm currently using Oracle8.1.5 on AIX4.3.3. I'm already report this problem to Metalink but they still not upload the patches.
TQ

rdbms 815 went out of support on dec. 31, 2000.
you need to move to a currently supported version (i.e 816 or 817(recommended)).
once a product goes out of support, patches are no longer created for it ..

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
    jdbc_host="foo.com"
    jdbc_sid="//mypdb1.foo.com"
    jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
                   jdbc_host="mydbinstance"
                   jdbc_sid="pdborcl12c"
                   jdbc_port="1522"
                   jdbc_user="mytestuser"
                   jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                   jdbc_mode="thin"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
use
<map_data_source name="my_12c_test"
                   container_ds="jdbc/db12c"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

Oracle Database Release 1 (10.1.0.5.0) for solaris 10

Hi can anyone tell me where to download Oracle Database Release 1 (10.1.0.5.0) for solaris 10? Thanks in advance.

10gR1 is no longer supported - you will either need to open an SR with Support and ask them to ship you the media (assuming you have a valid license and a support contract) or see if you can download from http://edelivery.oracle.com. In either case, you will most likely get the base version of 10gR1 and you will need to patch it up to 10.1.0.5. The patch is only available in My Oracle Support. Is there a reason you need such an old version of the software ?
HTH
Srini

Solaris 10 patches for Oracle Database 11gR2

Hi,
I downloaded Oracle Solaris 10 s/w from e-Delivery and got it installed. For Oracle Database 11gR2 I also need the followging patches:
120754-06: SunOS 5.10_x86 libmtsk
119961-05: SunOS 5.10_x86: Assembler
119964-14: SunOS 5.10_x86 Shared library patch for C++_x86
Though we have access to MyOracleSupport we can only download s/w patches using our support contract with Oracle and not OS patches.
Is there any other way I can get these patches.
Rgds,
Thiru.

Thiru,
You won't find the patches in the patches/ directory on the DVD or the ISO image. Oracle integrates the patches directly into the packages, so there is no need to provide or install them separately.
All patches have a patch number (e.g. 120754) and a revision (e.g. 06). A newer revision of a patch always contains all fixes of the previous revisions. So try to run "showrev -p | grep 120754" instead, and you'll see that patch 120754-08 is pre-installed. As revision 08 is newer/higher than 06, the patch requirement is satisfied.
Hope that helps,
mp.

Patch 8290549 for oracle 9.2.0.8

Hi,
I need to install April patch 8290549 for oracle 9.2.0.8 but have some doubts if it
is cumulative patch and if it is include Jan patch.
I will appreciate if someone could help with the two questions below.
Is April patch 8290549 for oracle 9.2.0.8 is cumulative patch ?
Is it include January patch 7592365 ?
Thank You,
Ronen

All CPUs released by Oracle are cumulative i.e. they include all the fixes from the first CPU released for a particular release (f.ex. 9.2.0.8) till the current one.
The Readme for the patch itself has following lines
<quote>
Critical patch update (CPU) patches are cumulative, which means fixes from previous Oracle security alerts and critical patch updates are included. It is not required to have previous security patches applied before applying the CPUApr2009 patches. However, you must be on the stated patch set level for a given product home before applying the CPUApr2009 patches for that release.
<quote>
Edited by: Satish Kandi on May 27, 2009 8:54 PM
Added Readme details.

Installing Current patch set after SAP installation

Hi,
We are installing SAP ECC6.0 on Solaris x64. We installed the Oracle RDBMS software and missed installing the Oracle Current patch set. We have proceeded with the SAP installation. Can we install the Patches after the SAP installation or do i need to uninstall SAP and do t all over again. Please help asap as i need to complete it..
Regards
Dee

Hello Dee,
> Can we install the Patches after the SAP installation or do i need to uninstall SAP and do t all over again
Of course you can install the patchset after the SAP installation. The current patchset is the 10.2.0.4.
After applying the current patchset - please install also the "on-top" patches - check sapnote #1137346 for this. Also check sapnote #830576 for setting the corresponding database parameters after the patchset installation.
Regards
Stefan

Oracle E-Business Suite Extensions for Oracle Endeca, Release 12.1.3.4 Installation

Hi All,
Previously we installed Oracle Extension for Endeca 2.3 for ChRM Claims on Linux Server but showing something went wrong with it. Now we are planning to install/upgrade with its recent version. Our main approach is also include the "budget dashboard" on EBS. For these we are referring the article id 1562372.1 for installation.
So is these good approach to de-install version which we installed previously and re-installed the complete set installation with recent version? QuickInstall package i.e E-Business Suite Extensions for Oracle Endeca, Release 12.1.3.4 Generic V39077-01.
E-Business Suite Extensions Oracle Endeca Server Quick Install for Linux x86-64 V39078-01.
Is there any effect on EBS if we do so?
Because we installed different patches for previous installation and as per the doc id 1562372.1 we need to apply some more different patches for these installation.
Or Is there any approach to to upgrade E-Business Suite Extensions Oracle Endeca which we installed previously?
Please help me to regarding these I am very new to these.
Thanks & Regards
Rahul

Hi,
While checking the load data its showing error in clover url.
We got error like this.
Graph 'sandbox://Common/graph/FullLoad.grf' failed!
And we followed the document for this issue Endeca graphs failing (Doc ID 1549013.1)
Please help me to fix this issue.
Regards
Kumar

Current Patch Set for Oracle Database Release 11.2

Similar Messages

Maybe you are looking for