Current Patches for Windows (32bit) 9.2.0.8

We have recently upgraded to Windows 32-bit Oracle 9.2.0.8.  Note 539921  lists the patchset for Windows 32-bit as follows:
NT_I386 32-bit
/Oracle/Oracle 32-Bit/Oracle 9.2.0. 32-Bit/Oracle 9.2.0.8. 32-bit/
NT_I386/Patchset_9208_WINNT.zip
The patch set is installed with the runInstaller - see README.html
For more information about installing patch sets, see Note 578683.
*In addition, use opatch to install patch 12 for 9.2.0.8.
/Oracle/Oracle 32-Bit/Oracle 9.2.0. 32-Bit/Oracle 9.2.0.8. 32-bit/
NT_I386/9208_Patch12_WINNT.zip*
So, after an upgrade to Windows 32-bit 9.2.0.8 you should then immediately apply patch 12?  The problem is reading note 1107601 - CPU Patches October 2007 (Oracle Critical Update Program)
states the following:
*The CPU patches are not a patch set, but rather a collection of patches. If
there is a critical problem, you may have to install a separate fix, which
conflicts with the CPU patch. In this case, you must uninstall the CPU
patch.*
But there is nothing specific for 9.2.0.8 (it implies there are no conflicts for 9.2.0.8):
For Oracle 9.2.0.7, note the following:
Unfortunately, the CPU patches for Oracle 9.2.0.7 conflict with patches
that have already been installed and that are important for an SAP system.
Therefore, there will be no further release of the patches for Oracle
9.2.0.7. *We therefore recommend that you upgrade the database to Oracle
9.2.0.8 and use the CPU patches for Oracle 9.2.0.8 instead.*
So I'm assuming that after installing patchset 9.2.0.8 for Windows 32-bit I should apply patch 12 (which is CPU October 2007).  There are some patches listed under "Oracle Other" that seem to be generic patches listed under the download section for oracle 9.2.0.8.  Do these patches cause a conflict with patch 12?  I haven't seen a note that says to install them.
I haven't found a note that says to install anything other than patchset 9.2.0.8 and then patch 12.  Is this right?  I need to find out pretty quick so any help  is appreciated!

Hi,
do following as of note 539921
first apply patch set 9.2.0.8
/Oracle/Oracle 32-Bit/Oracle 9.2.0. 32-Bit/Oracle 9.2.0.8. 32-bit/
                                        NT_I386/Patchset_9208_WINNT.zip
than apply cpupatch CPUOct2007 patch 12 for  9.2.0.8  if you found critical problem with CPU it's optional
use opatch to install patch 12 for 9.2.0.8.
     /Oracle/Oracle 32-Bit/Oracle 9.2.0. 32-Bit/Oracle 9.2.0.8. 32-bit/
                                          NT_I386/9208_Patch12_WINNT.zip
regards,
kaushal

Similar Messages

  • Issue on Informatica PowerCenter 8.1.1 for Windows 32Bit

    Hi ,
    I was trying to install Informatica PowerCenter 8.1.1 for Windows 32Bit in Windows XP system. I am getting the the following error during installtion.
    Is it support windows XP OS.
    Pinging the domain
    =================
    Current time: 2009-Feb-09 15:21:00
    Command Executed
    cd /d "D:\Informatica\PowerCenter8.1.1\server\bin"
    infacmd.bat ping -dn "Domain_VDC01-HPd1295" -dg "VDC01-HPd1295:6001" -nn "node01_VDC01-HPd1295" -re 60
    Output of execution
    Output: [ICMD_10133] Command [ping] failed with error [[ICMD_10053] Node [node01_VDC01-HPd1295] Domain [Domain_VDC01-HPd1295] Host:Port [VDC01-HPd1295:6001] has failed to ping back.].
    Error:
    ExitCode: -1
    Installation Complete
    ======================
    Thank
    Settu Gopal

    Having a look at the FTP site, it would seem that the file is available on:
    ftp://download.oracle.com/www/otn/nt/oracle8i/oracle817ntee.zip
    Obviously this bypasses the licence agreement page that you may wish to read seperately.
    Jason.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jason Kane ([email protected]):
    Oracle 8.1.7 for Windows download goes to Yahoo Finance!!!!
    http://technet.oracle.com/cgi-bin/go?nt817ee-full
    Which is the link given on the technet page (at least at the moment - Wednesday morning here in England).
    One was quite surprised to find it take the browser to quote.yahoo.com!
    Jason.<HR></BLOCKQUOTE>
    null

  • SAP Netweaver CE 7.1 EHP1 for Windows 32bit

    Hello,
    anybody knows where I can download a SAP Netweaver CE 7.1 EHP1 for Windows 32bit?
    At the SAP Software Distribution Center I have found only 64bit version.
    Günter

    Hello John,
    thank's for your answer which helps me much! In the meantime SAP told us also that it is included in the developer studio.
    I don't have DVDs. I can only download from the SAP Software Distribution Center and there I can find 51036014 NW CE 7.11 Appl., Dev.WP 32bit, Doc. 1 of 6.
    In the Requirements for the training SAP wrote we have to install SAP EHP1 for NetWeaver CE 7.1 SP4 and Oracle 10.2 or SQL-Server 2005.
    If I look to the downloaded 51036014 kit I find the following directories:
    CE711_01_DOCU
    CE711_01_IM_WIN_I386_ADA
    CE711_01_IM_WIN_I386_MSS
    CE711_01_JAVA_EXPORT
    CE711_01_JAVA_IDE
    CE711_01_JAVA_J2EE_INST
    CE711_01_JAVA_J2EE_OSINDEP
    CE711_01_JAVA_J2EE_OSINDEP_UT
    CE711_01_JAVA_JDMP
    CE711_01_JAVA_JDMP_COMP
    ESE_NET_11
    FWK_CE711_01_TOOLS_WIN_I386
    K_CE711_UI_WINDOWS_I386
    MAXDB_UPDATE
    MAXDB_WINDOWS_I386
    There is no directory for Oracle. Do you know which directory I have do use for installation?
    Sorry I am a beginner  in SAP
    regards,
    Günter

  • Security Update 2007-001 patch for Windows

    Hi, I am having no luck in finding the Security Update 2007-001 for Quicktime security patch for Windows XP.
    Can someone please direct me to either the link to directly download the Windows version of the 2007-001 security patch, or a link to the Software Update tool in order to download this patch.

    http://docs.info.apple.com/article.html?artnum=304989
    If Software Update was not installed during your QuickTime Player install you'll need to uninstall it, re-install and include Software Update software.
    Is that enough install?

  • Difficulty installing Rescue and Recovery 4.2 patch for Windows Vista

    Which between System Update Installation History and Post-Installation Status Report should I believe, when they tell a different story?
    When I run thinkVantage System Update, the post-intallation status report indicates that the following fails to install:
    * Rescue and Recovery 4.2 patch for Windows Vista
    * ThinkVantage Client Security Solution for Vista SP1
    * Lenovo Wireless WAN Activation Patch
    However, when I open the ThinkVantage System Update History Log, I read that the above updates have been installed.
    Which one should I believe?
    I'm willing to believe that the update has been installed, but whenever I run System Update, I keep getting the same message that the above three need to be installed.
    Should I keep ignoring the message? If not, what else could I try?
    I have a T60 running Vista with SP1 installed. 

    Hi privard,
    Thanks for your feedback. Anyhow, let me see how i could help to sort this out for you.
    Cleo 
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Can somebody helpme apply Oracle Olap 9.2.0.1.0.a patch for Windows

    Everything on the system is a fresh installation.
    1.Oracle 9iR2 Database, I chose the data warehousing option.
    After installation I checked to make sure that everything could be started.
    2. I then proceeded to install the Oracle OLAP patch 9.2.0.1.0a patch for windows.After navigating to the 2499827 directory.
    I typed OPatch\opatch apply as stated.
    It started then said "Peforming Pre patch installation checks"
    At the end of this
    I recieved a message saying
    "The following required components were not located or have the wrong versions
    oracle.options.olap"
    I guess it was to right to assume that the patch process failed, particularly as don't see any olap\admin directory in my %ORACLE_HOME%. The olap directory is there.
    Can somebody please give me some pointers. Is there something I have missed with regards to setting up Oracle 9iR2 thats preventing me from patching it.
    Thank you
    Richard Smith

    If you are missing the admin directory under your olap directory your initial Oracle9i Database Release 2 installation appears to be the culprit. Again, be sure to install the Enterprise Edition with the Data Warehouse database configuration. Also, make sure your Global Database Name and SID are all set up and running fine. Perhaps you installed over a previous ORACLE_HOME? Be sure to follow these steps for a proper Oracle removal:
    1. Terminate the Oracle9i Database and its processes
    Go to the Services applet in Control Panel and Stop all running Oracle processes
    2. Run OUI to uninstall your previous version of Oracle9i with OLAP Option, then Exit
    Choose 'Deinstall Products...'
    Select the products you need to remove, then click 'Remove...'
    Then click 'Exit' when done
    3. For a clean installation remove the following directories and registry entries (if they still exist):
    Directories:
    <your_drive>:\oracle\ora92
    <your_drive>:\oracle\oradata
    <your_drive>:\oracle\admin
    <your_drive>:\Program Files\Oracle
    Registry Entries:
    [HKEY_CURRENT_USER\Software\ORACLE]
    [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92Agent]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92ClientCache]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92HTTPServer]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92PagingServer]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92SNMPPeerEncapsulator]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92SNMPPeerMasterAgent]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92TNSListener]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleServiceMY_SID]

  • CPU patch for windows

    Hi ,
    Is the oracle CPU patchs released separately for windows platform (like how they release it for UNIX flavours ).... or is it only Bundle patches for windows . I did some metalink search and google search and my understaing is there is no CPU patches for windows ... we may need to use only Bundle patches for windows platfrom . If so , does Bundle patch include CPU patches ?

    Hi;
    You need to check below link and you need to find patch number from notes and you need to check patch from metalink. If the patch is not avaliable for Windows platform than you need to rise SR and get patch from support
    http://www.oracle.com/technetwork/topics/security/alerts-086861.html
    Regard
    Helios

  • SAProuter.sar patch for windows x86 32bit

    Hi friends,
    I am unable to find SAPRouter.sar patch (Release Kernal 700) for windows x86 32bit. And also tel me the steps for config at system level, as I have done all the req steps at service market.
    Does SAPRouter to be connected in the internal network?
    While creating RFC connnection to SAPOSS I am geting an error.
    If anyone have an idea reg SAPRouter, just msg it.
    Regards,
    nagesh

    Hi Andrews,
    I have seen tht path but I am unable to view for win 32 bit. These are for different OS found in the SAPRouter link.
    SAPROUTER 7.00
    AIX 32bit
    AIX 64bit
    HP-UX on IA64 64bit
    HP-UX on PA-RISC 32bit
    HP-UX on PA-RISC 64bit
    Linux on IA32 32bit
    Linux on IA64 64bit
    Linux on Power 64bit
    Linux on x86_64 64bit
    Linux on zSeries 64bit
    OS/400
    OS/400 V5R2M0
    Solaris on SPARC 32bit
    Solaris on SPARC 64bit
    Solaris on x64_64 64bit
    TRU64 64bit
    Windows Server on IA32 32bit
    Windows Server on IA64 64bit
    Windows Server on x64 64bit
    z/OS 32bit
    z/OS 64bit
    I will be thankful if u send me a message reg this.
    Regards,
    Nageshwar

  • Cpu jan 2010 patch for windows

    Hi All,
    can i know the patch number for cpu jan 2010 patch set number for windows.
    kk

    It depends on your version of Windows (2000,2003,2008, 32bit, 64bit, itanium, etc).
    Your best bet is to view the My Oracle Support note for the Jan 2010 CPU (ID 986632.1) to find the correct patch number.

  • Current patchset for windows 2003 32 bit OS and oracle 10.2.0.4

    Hi,
    From the Service Marketplace i come to understand that SAP has released only patch collection 8 for windows 32 bit server and oracle 10.2.0.4.
    I am currently in patch collection 5.
    Please let me know if i need to apply patch 8 or higher.
    Regards,
    siddhartha.
    Edited by: Siddhartha Rabindran on Dec 13, 2008 7:25 AM

    It´s advised to have the latest patchset but it´s not required if you have no problems.
    Markus

  • Photoshop elements 7 and the patch for windows 7

    I have installed the patch on my hp laptop for windows 7 but photoshop elements 7 does not function properly and close the program.  any suggestions?

    Hlm1 do you receive a specific error message?  Did the program ever work?  If so what changes have you made?  What are you doing within Photoshop Elements when you receive the error message?
    If your software is able to open successfully then I would recommend posting your inquiring in our Photoshop Elements forum.

  • Blue Screen of Death when installing latest patches for Windows 7

    I get a BSOD when I installed the latest windows patches.  the actual error message skips between a General protection Fault and the following:
    DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS.
    It is involving the file applemtp.sys at stop 0X000000CE
    I am unable to recover from it including a "safe mode" and a revert to previously known configuration.
    Any ideas would be greatly appreciated.

    Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
    There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
    You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

  • SMS2003 unable to deploy secuity patches for windows 8.1

    Hi
    I'm using SMS2003 as a deployment tools. Recently when I try to deploy security patches onto our windows 8.1 PCs and Laptop. From SMS2003 console, it shows deployment successfully. But when I double check the status via PCs and Laptop. None of the patches
    deployed.
    Any idea what's happening.
    Thanks and looking forward for reply.
    Tommy

    I am pretty sure that SMS 2003 does NOT support Windows 8.1. I'd open a case with CSS to verify, but would assume that they'd tell you the same thing.
    Wally Mead

  • EM patch for windows 7

    i have installed windows 7 32 bit on my pc . and install oracle 10g r2 the database is installed sucessfully but the EM does not run.
    it gives some java error and i can not login to EM . is there any patch to run dbconsole on windows 7 .
    waiting for response
    yahya

    Thanks Pavan for ur reply i run the following query and i m afraid my versioin is not compatible what should i do to run my EM on windows 7.
    select * from v$version
    where banner like 'Oracle%';
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    waiting for ur response
    yahya

  • 11i patches for windows 2000 server

    Can any one let me know about the patches that have been released for 11i installations on windows 2000 server.

    We used ACS 3.2 with 200 server several months without problems (with regular security and system updates and ACS was working fine) few weeks ago we have upgraded (upgrade not fresh install) server to 2003 and ACS is still running OK - so I think you dont need affraid of security upgrades
    M.
    Hope that helps rate if it does

Maybe you are looking for

  • OBIEE error while scheduling the report.

    Hi, I scheduled one report in OBIEE tool for 8.30 pm but that report get failed. I executed the same report many times with the same database configuration, same FTP configuration, I never get such exception before. In the morning i again execute tha

  • WL6.1 + IIS, request.getInputStream is not working. Please help.

    I'm running IIS + WL 6.1 and in my servlet code, when I use request.getInputStream(), it has nothing in the input stream for e.x. InputStream istream = request.getInputStream(); BufferedInputStream buf = new BufferedInputStream(istream); byte[] b = n

  • How do I get a song from another site (MP3rocket) to itunes?

    I subscribe to mp3rocket music downloads and can play the songs on my computer but can't get them over to itunes and onto my ipod. The site says they go right to itunes but I don't know how to get them into the library. I am new to all this.

  • Moving a Cluster Shared Volume with a VM

    Hi, Is that possible to move a Cluster Shared Volume (dedicated to 1 VM) with its associated VM together if the VM live migrates to another node ? I try to find a way on Internet but nothing ... Thank you for the answer :-)

  • Trying to call Northern Ireland; no country code f...

    I am actually trying to call northern ireland, and there is no country code in skype for that. I do have credits my calls are not going thru. As Neil notes, below, this post was transferred from its previous location to create its own new topic here;