Current period time vs previous period time
Hi All,
I have to create a report which compare the sales period time..
for example variable 0calmonth period 0108 - 0208
product | current period 0108 / 0208 | previous period 0107 / 0207 | current - previous
TV | 1000 | 500 | 500
Audio | 100 | 300 | -200
its work great
but when I add 0calmonth in column query
product | current period 0108 - 0208 | previous period 0107 - 0207 | current - previous
0107
0207
0108
0208
0107
0207
0108
0208
0107
0207
0108
0208
TV | 0 | 0 | 800 | 200 | 300 | 200 | 0 | 0 | -300 | -200 | 800 | 200 |
Audio | 0 | 0 | 70 | 30 | 150 | 150 | 0 | 0 | -150 | -150 | 70 | 30 |
This is not what i want.
I want this.
product | current period 0108 - 0208 | previous period 0107 - 0207 | current - previous
0108
0208
0107
0207
0108-0107
0208-0207
TV | 800 | 200 | 300 | 200 | 500 | 0 |
Audio | 70 | 30 | 150 | 150 | -80 | -120 |
How do that?
Hi,
I think there is a way to do this, take normally first 4 fields, product | current period 0108 - 0208 | previous period 0107 - 0207 | current - previous
Then remove 0CALMONTH from columns and after that create a RKF by new selection, using sales Keyfig. with 0CALMONTH resticted to the value 0108, and next take a new selection and restrict the same with 0208.
Similarly restrict for remaining months also (0107 0207 0108-0107 0208-0207 ) so that it can be arranged in the order u want.
Hope this helps.
Rgs,
I.R.K
Similar Messages
-
Call Time: Current Period = Lifetime
I can not figure out why my call times are equal...and the numbers make absolutely no sense whatsover...I bought my iPhone on iDay and have only done a full restore but once back in Sept...am I right to assume that when I did the restore, I wiped out the lifetime stats?...ok, assuming this is an accurate, then I should at least have lifetime stats that reflect since mid Sept which amounts to about 40 days...yet it shows the following for both current and lifetime call time:
*5 Days 17 hours !!!!!!!*
I have searched the discussion board for an explanation of what might be causing this but nothing jumped out at me...I saw a lot of responses to the standby and usage time but this isn't my issue...do I have a iPhone replacement issue...I've already done a restart and while that affected the standby/usage stats, the current period/lifetime stats remained unchanged...please, does anyone have an answer for this?...any help is greatly appreciated !Hmmm, so since the restore, I've been on the phone 5 days and 17 hrs...ahhh, and since I've never done a reset, that's why they are equal...that clears it up for me...wow, thanks !
I do have 1 addt'l question, if I may, when I do a reset, will that wipe out both my lifetime and current periods?...or will only the current period reset to zero while the lifetime is maintained for history purposes?
Thanks for taking the time to enlighten me...I sure do appreciate it -
Is the "Call Time Current Period" is the minutes that I used from my plan?
Under the Setting, there are
- Time since last full charge > Usage : is this just minutes(time) since I fully charged?
- Call TIme > Current Period: Is this the minutes I used from my plan (450 minutes for 59.99/mo.)? And is this correctly updated after fully charged?
Thanks in advance for clarifying my questions!blue sky wrote:
Under the Setting, there are
- Time since last full charge > Usage : is this just minutes(time) since I fully charged?
Yes
- Call TIme > Current Period: Is this the minutes I used from my plan (450 minutes for 59.99/mo.)? And is this correctly updated after fully charged?
No. The current period is just the time since it was last manually reset.
Thanks in advance for clarifying my questions!
No problem -
P & L report for current period,YTD and previous YTD
I am trying to create a P & L report with the columns for current period,YTD and previous YTD, I have include the measures as the key of columns, which by using period or YTD we can retrieve the current period and YTD column, is there as easy way to get the previous YTD? although I can get it by using evtim to het every month and calculate the previous YTD.
resolved, just need to bring both time and measures in the columns
-
Current period, Previous Period and Sum from starting to current period
Dear Friends,
I have a typical requirements to push the following 3 KF into a .CSV format from BW CUBE.
1.Amount of Current period,
2............Previous Period
3............Sum from starting to current period
Cube is stored at period level..
Can anyone through me your views of doing, posibilities and prefered ways of the 2 approaches below
a) Infospoke, Badi enhancements
b) New cube to caliculate abouve things and then infospoke
c) Query and useing RSCRM... tool to run the query to dump into .CSV
Thanks for your valuable time.
regards,
hariAnother possibility is taking a snapshot to a transactional ODS using the APD. This creates an outbound layer that you can then use Open Hub to push out.
-
Logic for carry forward of previous stock to current period stock.
Hi Experts,
Client is using already MC.9 for see the stock analysis report, however as per there requirement we are exploring BOM as well as fetching quantity from table level as well. in my report I am experiencing difficulty to carry forward previous period closing stock quantity to current period stock quantiy, if there is no received for current period, however the same is happens in MC.9
Could any one tell me what is the logic behind MC.9 which is do carry forward previous period closing stock to current period stock quantity in report.
As per the requirement I am using S031, S032,S033, however unable to get logic for carry forward the previous month stock quantity to current month.
have a requirement of creating a report of showing material stock period wise for each plant in below mention format.
Header 1
Header 2
Header 3
Header 4
LFGJA/LFMON
ROH (MT)
HALB (MT)
FERT (MT)
11.2013
100.000
121.000
121.00
12.2013
50.000
12.000
123.00
01.2014
23.231
.23.234
45.342
02.2014
23.231
34.094
45.098
03.2014
34.098
98.983
00.000
04.2014
00.000
69.093
98.098
05.2014
00.000
89.098
00.000
For Example Break up of ROH material plant wise in below mention format.
LFGJA/LFMON
WERKS
MENGE (MT)
11.2013
P001
30.000
11.2013
P002
50.000
11.2013
P003
20.00
Thanks in advance,
SKNHi,
The last period closing stock = current period opening stock. You may get the details from MBEWH and S032 tables. Refer the doc: Material Stock and Valuation History tables - how to read them
Regards,
AKPT -
Current Period & Previous Period in MBEW
Hi,
I have to generate a report in BIW to show the material stock of current year to back three years month vice.
For which i will fetch data from table MBEW(for current period data) & MBEWH(for past periods data).
As i am a technical personal so i want to know what exactly the current period stands for and previous period.
If i am not wron the MBEW stores current period data for material valuation.
1. Suppose as this is January 2008, will the MBEW store data only for this period ?
2. And as this month is not complete yet then will this table wil be updated daily ?
3. what happens with the data of this table when a month ends ?
4. Now when i look up at the data in the MBEW its showing me current period as 001 & current fiscal year 2008 - what does this signifies ?
Our client follows V9 fiscal variant, i.e. fiscal period is OCt- Sep.
Can anyone please provide me some functional details regarding my query's ?hi,
table MBEW is for material valuation table, irrespective of the period. here there is no bifurcation of this current period and previou period.
MBEWH- is material valuation history table.
here current period running active period in which the posting is beeing done.
previous period is one month before the current period.
here in MBEWH, an option is given to fill the last current month as required for fetching the data.
Edited by: manipal on Jan 10, 2008 4:56 AM -
Current period load and previous period load
Hi
when I look into some cube, its loading the full load data for Previous period as well as Current period.
the next day we r deleting the both over laping request and loading the same current and previous load .
could any one explain why this selection in infopackage in full loading.
why dont't we load with last posting period / Fiscal year selection into infopackage selection for full load.
Thanks
Ram
Message was edited by:
ramIs the datasource is non delta enabled ?
If yes , den Full load is done always using the Overlapping Request Deletion in the Infopackage or DTP in BI 7.0 - so as to make all data available .
If ur willing to change the dates in the Infopackage filter daily ( u can rite some routine though ) den u can do that but if u want to automate all this process u go with Overlapping feature. -
Apply previous period Costing run to Current period
Hi ,
Is there any way I can apply a previous period costing run to the current period?
I had done a full costing run through transaction CK40N on Oct 2010 with the following dates
Posting Period: November 2010
Costing Date From: Nov 1st 2010
Costing Date To: Dec 31st 2010
Qty Structure Date: Nov 1st 2010
Valuation Date: Nov 1st 2010
How can I apply the results of this costing run to December 2010? I do not want the costing run to affect November 2010 and I also do not want to re-run the costing run.
Thanks,
Sincerely,
NickyHi,
We have just completed the analysis of the November costing run which consisted of a huge list of materials. We do not want to re-run the costing run for December because we will have to do the analysis again and we fear that we will not be able to update costing before Dec 31st 2010.
Is there no other way to re-apply the Nov Costing run results to Dec?
Sincerely,
Nicky -
MM:Price Change did not Carry forward from previous to current period
Hi Gurus,
Client has Reported that the Weighted Average Cost (WAC) was automatically reset to Zero in a particular Period and didn’t carry over from the previous period , The initial analysis was done and it was found that there is a configuration for “Price Change in Previous Period and not in current Period” which has to be maintained for the company code
The question is whether this configuration (“Price Change in Previous Period and not in current Period”) impacts both the Standard Price and
WAC or does this impacts only Standard price
Any pointers will be helpful, Will also Award Points
RegardsHi Gurus,
Client has Reported that the Weighted Average Cost (WAC) was automatically reset to Zero in a particular Period and didn’t carry over from the previous period , The initial analysis was done and it was found that there is a configuration for “Price Change in Previous Period and not in current Period” which has to be maintained for the company code
The question is whether this configuration (“Price Change in Previous Period and not in current Period”) impacts both the Standard Price and
WAC or does this impacts only Standard price
Any pointers will be helpful, Will also Award Points
Regards -
2nd Previous Period from the current period
Hi MM Gurus,
Is it possible in MM to open a 2nd previous from the current period?
Please advise,
Thanks,
Thembahi,
> Check the OSS NOTE 487381
You can only open the last period via using the MMPI..using indicator allow back posting...
Other than this you can open pervious periods for sandbox techniques. as well ....but SAP don't recommend it...
check few posted threads on SDN...
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Jun 2, 2009 9:52 AM -
Current period in Accounting 1 view of Material Master
Dear Experts,
In Accounting 1 view of Material Master there is a current period, now it is 12 2009.
Is it possible to make it 11 2009, if yes how to do it.
Please help if you have solution. it is very crucial for me.
Thank you for your support.
Regards,
ZusenHi,
Please read the Solution part of note 487381. There is still a few things need to be carry out before you can proceed
with the initialization :
Bear in mind that the initialization of a posting period has the
following effects concerning the period stocks:
o The initialization of the posting period to a previous or to any
posting period may lead to the loss of the information of the
inventory balances of the previous periods.The book value of the
current posting period is taken as the basis also for values of
the previous period in this case.
If you want to continue working with this new posting period, in
addition you should execute report Z_DEL_HIST_ENTRIES attached so
that history entries greater or equal to the new posting period
will be deleted.
o If you have to briefly reset the posting period by one period
(for example, postings must still be posted in a certain period)
just to make a correction (and for a small number of postings),
you should initialize the posting period back again to the old
value so that the values of the previous period will not be lost
(you should forbid postings when carrying out corrections).
However, afterwards the values of the previous period or the
history records (as of Release 4.5) of the materials posted in
this case are inaccurate.
You should NOT execute report Z_DEL_HIST_ENTRIES in this case.
o However, if the posting period is generally reset again to a
previous posting period and if postings were made during this
time, all information on the inventory balance of the previous
periods is lost.
As of Release 4.5a, you should use the cited correction report
Z_DEL_HIST_ENTRIES in order to delete history records that are
more current than the current posting period.Otherwise, it can
result in deviations (inconsistencies) for the update of the
history records.
o Important! If there are open physical inventory documents that
have status 'counted' or for which indicator 'Freeze inventory
balance' has been set, you should reject these if they refer to a
previous period or have been created in the former previous
period.The inventory difference to be posted can be determined
from the current book value of the previous period and the book
quantity frozen in the physical inventory document (ISEG-BUCHM)
and does not match the inventory balance of the previous period
that is currently valid. -
MR21 - no accounting doc. for the current period
Hi,
we are facing the following problem.
Each month, our accounting team is doing the price change through MR21. They are posting it to the last day of a previous period. Each month there are two accounting documents - one posted to the last day of the previous period and one to the first day of a new period.
As I understand this is a standard behaviour since the tick in OMRN is missing. (It was not ticked for previous few years).
However this month, there was no accounting document for the current period.
We have patched SAP_APPL in the time between these two activities.
I have checked that MM period was changed several days before they have done MR21. There were many material movements (sales) concerning the affected material masters. Materials are priced by the standard price.
I have tried to check OMRN for the affected company code and do the MR21 with no results - as it does not effect MR21 whether it is checked or not.
I havent found any note for this so far.
Any help appreciated.Hi,
If the issue occurred after upgrade, you may check for SAP notes or raise an OSS ticket to SAP.
Regards,
AKPT -
Error: No depreciation posting required in period 009 (current period)
Hi,
I am getting error " No depreciation posting required in period 009" and 009 is my current period.
The description of the error says " Do depreciation is posted, since according to the posting cycle no postings are required in this period". In fact this is the first time i am running depreciation. I want to post the depreciation for 1st period. More over i could not able to see the planned values in asset explorer also.
Whenever i am entering this asset in the asset explorer it is giving the above error. But while i run the depreciation its not giving any error. When i check in spool to view the depreciation, its giving msg as "List contains no data" check error log.
Could anyone help me in resolving this error. what could be the reason for this error.
Thanks
SaberaHi,
I checked in TABA table, its showing that till 9 the period depreciation has been posted. But i have not posted the depreciation. If it is posted, then it has to show in the planned values as posted, but its showing as "No depreciation" and its not even showing the depreciation for other periods. Could you able to clear this query? I wonder why it is giving this kind of error.
Regards
Sabera -
How to change the current period in material master
hi everybody,
as i have installed sap 4.7 ides version on my home pc for practice , but hwenver i am creating the new material master in the system , i observe that in accounting1 tab the current period is 12 2002 , how should i change the current posting period so that i can start the transaction in current uear 2009 and then later i can work in 2010 ....
i have tried the transaction mmrv, mmpv, mmpi through some resources but i didnt know how to do the settings in the system in IMG (SPRO) kindly help me through , i have wasted lot of time in this..
i hope MM team will help me out of this...
AMIT BATHLAHi,
Check in OMSY Transaction that, Which current month and year is having your comapny code.
and go to T.Code MMPV
enter Next Month of that cureent period and Year
and Execute. You find the message that your current period has changed.
Do the same process month by month till reaches to current period and year.
Let me know if you have further queries.
Padma.
Maybe you are looking for
-
CS3 update failure on Mac OS 10.6.8
Running CS3 on Mac OS 10.6 and updates do not download, specifically for Acrobat 8 Professional v 8.1.5 updates 8.1.3 , 8.1.4 , 8.1.5 , 8.1.6 repeatedly prompted but never able to download Individual updates downloaded from support site do not load w
-
Updated iPod to 1.2 , now it tells 'use itunes to restore'. How ?
Hello, sorry my english. I have just updated my iPod nano from firmware 1.1.1 to 1.2 using latest iPod Updater 2006-06-28. It went ok. Then i entered iTunes 6.0.5 and made an eject. The iPod showed "OK to disconnect". I disconnected. But now when I t
-
Hello, Since it's not possible to add IT2051 to the AdHoq Query, I was trying to create an additional structure and wrote a little program for retrieving absence data. The problem I get is that the output only shows results for 1 day and not for the
-
Problems installing flash player. Learner
I am experienceing problems installing flash player. I go to the adobe website and install the program and I am told it has been successfully installed. No flash player icon apppears on my desktop. When I press the windows start icon and click on "
-
Setting archive attribute for files
Hi, I've written a program to make backups from files. I'd like to set archive attributes for files so the program knows which files have changed since the last backup. Is there any way to do that?