Current position in image resets upon switching between images

I have Adobe Photoshop CS3 on Windows XP. Here's what happens:
I have multiple images open at once
I'm zoomed in real close on a picture, say somewhere in the lower-right-hand corner of the image
I switch to another image (ie, go to Window->[Other Image File.jpg] or hit Ctrl+Tab) or I create a new image
Upon switching back to the first image I find the viewing position has changed to the very upper-left-hand corner of the image (ie, pixel location 0,0).
This forces me to scroll/navigate myself back to the original position of my image every time I toggle across multiple pictures.
It's very frustrating as there are times I am cutting down an image for a web design or photo edit and have to switch between multiple pictures very often throughout the process. It just wastes a lot time having to re-scroll to my original spot in the image. Anyone else out there had this issue?
- Tim

Let me guess. You're switching images by clicking on the filmstrip.
The badges are "active". Clicking one of them will do the action associated with that badge.

Similar Messages

Oracle XE switching between instances

Hi,
I've installed oracle XE and created second database. Currently, I have two databases, can switch between them and have 8GB of user data available, even in separate DBs. I wonder, if this is license agreement complient. Only one instance is running at a time, have only one instalation...
Thanks in advance Jakub
Edited by: user11108056 on 25.5.2010 5:16

There is one more reference about licensing in instalation manual:
On a single computer, only one installation of the Oracle Database XE software can be performed. This does not affect any existing installation or new installations of Oracle Database 10g Standard Edition, Oracle Database 10g Standard Edition One, or Oracle Database 10g Enterprise Edition. In addition, users can run only one instance of the Oracle Database XE database on each individual computer. To run more than one Oracle Database server instance or install more than one copy of the database software, upgrade to Oracle Database 10g Standard Edition, Oracle Database 10g Standard Edition One, or Oracle Database 10g Enterprise Edition.
But even this does not look like a problem to me...
Jakub
Edited by: user11108056 on 25.5.2010 7:10

Using Windows 7 and Firefox 10.0.2, at random times all home page images "disappear" when switching between web sites. Page layout on some web sites is lost. Requires removing and downloading Firefox to restore. Any ideas?

I have recently (6 months ago) purchased and use an HP Pavilion desktop with Windows 7. At times, when especially active (several windows open) and switching between windows or using links to connect with another web page, all the images on the home home page "disappear", that is to say there is space, but no image, as if the page did not load correctly. When this happens, pages other than the home page also do not display images.
Same pages display correctly in Explorer whenever this happens.

Hi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj

I currently live in Australia and am thinking of buying a mini Ipad3g. However, I'll be moving back to the UK soon. Is it easy to switch between using the 3G in different countries? Thanks

I currently live in Australia and am thinking of buying a mini Ipad3g. However, I'll be moving back to the UK soon. Is it easy to switch between using the 3G in different countries? Thanks

iPads work worldwide. Just get a local iPad dataplan and sim.

Fastest way you switch between multiple images (CS3) ?

I'm originally a Fireworks user (from 2001) and am starting to learn Photoshop as it is in my CS3 set and it's superiority in image editing.
BUT, I was suprised/shocked/P.O.-ed to notice Photoshop doesn't have tabs to easily switch between images like Fireworks has had for the last 7 years.
(Yes, I realize CS4 has that option now, but I'm not willing to dole out another $600 bucks for another upgrade )
Anyway, enough ********.
My question is:
"Can you tell me how you switch between multiple images opened in Photoshop CS3?"
I'm assuming there must be a keyboard shortcut I can't find, or something besides having to shrink down the images and routing through them . . .
Thank you for your time and help,
Brad

Hi again My,
Thanks for the reply on my other post as well.
Ctrl+Tab
Got it. Thank you.
Quick and easy enough. I'm happy :-)
Brad

When I set black point on windows, the image switches between blank and full image, why?

when I set black point using windows, the image switches between blank and full image, why?

I set black point with alt button down while I move sllider. When black
dots show, I stop and back off a bit. That's the normal result. Normally a
white screen appears until I release the alt key. In my case, sometimes the
screen goes from white to full image. It's not all the time. I view my
power and ram use as I work and it doesn't spike when this happens. It's
as if the alt key command is not holding. I've used both alt keys with
same results.
Thanks for responding. I hope you have some ideas.

Do I need to reset the router when switching between Win and Mac?

I just set up my new Mac Pro with OSX 1.5.2 and Win XP using Bootcamp and it all works fine, but I have one question about connecting to the internet.
I have a Belkin pre-N wireless router. I am connected using an ethernet cable.
When I switch between OSX and Windows by restarting the computer, is it necessary to restart the router while the computer is off so that when it comes back on it can locate its proper connection?
When I was working on my old PC and my new Mac Pro, I noticed that if I just took the ethernet cable from the Mac or PC and connected it to the other machine, it couldn't find the internet unless I turned off the router, waited a moment and turned it back on again, connected to the other machine and then started the machine.
As the two OSs are now in the same machine, will this continue to happen or can I simply switch between operating systems without having to re-initialize the router and connect it before turning on the computer again?
I haven't tried it yet because I am afraid to screw things up, so I am continuing to turn off, restart the router, re-connect and turn the computer on again. That work perfectly but it is tedious.
Can anyone please advise on whether this is necessary or not?
Thanks a lot for any advice.

Luis:
You should be able to leave the router on and switch between the two OSes. Try it. Worst thing that can happen is that you would need to restart the router.
Axel F.

Double-tapping to switch between or clear running apps is not working with iPhone 4s.

when I double tap to close out or switch between running functions, it does nothing ever since yesterday. I have the most current update since last week and the home button works for all other purposes so it's not broken. Now my battery is draining because I cannot shut off running apps. Please help!

Hi Kate,
Welcome to Apple Support Communities.
It sounds like you’re running into a multitasking issue that’s preventing you from switching between apps or forcing them to quit. Try restarting your iPhone, as shown in the article linked below.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If that doesn’t do it, you can always try restoring the iPhone to factory settings too.
Use iTunes to restore your iOS device to factory settings - Apple Support
Cheers,
-Jason

Why will Firefox allow me to have multiple tabs available, but not allow me to switch between tabs, and can only look at a new tab by closing the previous one?

Whenever I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab won't open, and I can't switch between multiple tabs. The only way to get to a new tab is to close the one I am currently on, and even then it will only open the next tab in order of precedence, so I can not even choose which tab is the next to view. This problem is making it impossible to use firefox as a research tool which requires fast switching back and forth between multiple tabbed pages simultaneously.

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

How to switch between two query in Web templete.

Hi all,
Here i am facing problem to switch between two query in web template by using one 'table' web item. is there any way to use hyperlink 'SAP_BW_URL' and we can switch to query. here i am using these HTML code..
<table><tr><td class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td>
<table><tr><td class="sapbexbtnstd" ><A href="<SAP_BW_URL cmd='reset_item' item='table_data' query_ID='ZSD_ZSD_M01_Q20' apply_cmd_on_target= "X">" >Switch to other query</A></td></tr></table>
but i am not getting correct functionality.
please help me to solve this problem.
I know the best way to say thanks in SDN.
thanks
Kiran Patel

Kiran,
Use the web api reset_data_provider as links or in select option in HTML.
   Onchange event of this select option should call JAVASCRIPT method and
   this in turn resets the current dataprovider to your concerned one.
   How to change graphs:
   The graph item has the default data provider:
   <object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="CHART_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CHART"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="TMP_CHART_DATA_HANDLE" value="IIP_49MOXB0UVNOMM6JOZMZU7QO21"/>
         ITEM:            CHART_1
   </object>
So if you change the DATAPROVIDER_1 using RESET_DATA_PROVIDER to your concerned DP, this changes chart as well !!
   Please use this method and refer to sample code for Onchange Event on SELECT OPTION:
<HTML>
<HEAD>
<script>
function callDP() {
     if(document.forms[0].dp.value == "1") {
        //form your URL here..
       url = SAP_BW_URL_Get() + "&CMD=RESET_DATA_PROVIDER&DATA_PROVIDER_1=..&...";
        SAPBWOpenURL(url);
        //or docuemtn.location.href = url..
        //etc..
</script>
</HEAD>
<BODY>
<form>
<select name="dp" onChange="javascript:callDP();">
<option value="1">1</option>
<option value="2">2</option>
</select>
</form>
</BODY>
</HTML>
HOPE THIS HELPS !!!

Using a KVM switch between the Mini and a PC

I've just bought a Mini to try out the whole Mac experience.
I'm having trouble getting a KVM switch to work with the Mac.
I have a Tripp Lite B034-002-R KVM switch to share between the Mini and my WinXP PC. The switch changes over to the other computer when you press NUM LOCK twice within 2 seconds. This is working in the PC (i.e. switching from the PC to the Mac is fine) but is not working in the Mac (i.e. the switch doesn't change from the Mac to the PC).
I have a MS "Natural Keyboard Pro" USB keyboard.
Is the NUM LOCK key somehow disabled or something on the Mac? I'm hoping there's some knob I can turn to get this working.
Thanks for your help,
Tom

I bought an IOGEAR GCS632U KVM switch to move between my Mini and Windows XP Pro PC. The keyboard is an Apple Pro. The switch was perfect for several days, then every attempt at invoking the hot key mode would fail; resetting the switch would not correct the problem. IOGEAR Support had me try another keyboard, which is the current standard Apple wired keyboard (the $30 one); it had the same problem as the Pro keyboard. Also we tried other things, but all failed. Sent the KVM switch to IOGEAR and they sent me a new one. After two days using the new switch, the keyboard malfunctioned; this time it was the backward delete key that failed. Same problem using other Apple keyboard. IOGEAR Support, after going through the same previous routine in which nothing succeeded in correcting the problem, tells me to return the switch and they will send me another. Based on my experience, apparently the GCS632U model has an incompatibility problem with (some?) Apple keyboards. This is confirmed by two posts on other discussion groups sites. Also, IOGEAR Support would almost admit that to be the case. They suggested that I use a generic keyboard, but I refuse to buy one just to use that KVM switch. IOGEAR should post the potential problem on their website as a warning.
Does anyone out there know from experience that a particular IOGEAR model does work with an Apple keyboard? IOGEAR Support says that they will send me a different model if I pay the difference. Or can anyone give me the brand name and model number of any KVM switch known to be compatible with Apple keyboards (particularly one that costs less thatn $75)? A ConnectPro 2-port USB KVM switch will work, according to another discussion group post. Any advice or information will be much appreciated.

Crystal Reports - Switch between multiple databases at runtime (esp. DB2)

Hi,
we are currently developing a reporting application in .NET (C#) with an integrated Crystal Viewer. We want to be able to change the databse dynamically at runtime, especially between different DBMS.
We encountered no problems when switching between a SQL Server and an Oracle DB, but we ran into big trouble if trying to connect to a DB2 db.
In the report itself we have a SQL Server connection defined that is used during the design phase.
In our application we change the connection at runtime using the following code:
CrystalReportViewer viewer = new CrystalReportViewer();
ReportDocument document = new ReportDocument();
document.Load("<<path>>");
Tables tables = document.Database.Tables;
foreach (Table t in tables)
    ConnectionInfo info = new ConnectionInfo();
    info.UserID = "<UserId>";
    info.Password = "<Password>";
    info.ServerName = "<DSN of DB2 DB>";
    info.DatabaseName = "<DB2 DB Alias>";
    TableLogOnInfo tableInfo = t.LogOnInfo;
    tableInfo.ConnectionInfo = info;
    t.ApplyLogOnInfo(tableInfo);
// ... Setting parameter values ...
viewer.ReportSource = document;
We also tried to add the following lines of code after the "ApplyLogOnInfo" call without any success:
t.LogOnInfo.ConnectionInfo.UserID = "<UserId>";
t.LogOnInfo.ConnectionInfo.Password = "<Password>";
t.LogOnInfo.ConnectionInfo.ServerName = "<DSN of DB2 DB>";
t.LogOnInfo.ConnectionInfo.DatabaseName = "<DB2 DB Alias>";
Especially we are wondering because we don't get any error message. The Crystal Viewer just opens and shows an empty report without any data records. The TestConnectivity method called on each table (we are only using one table at the moment) also returns true.
Furthermore it seems that whenever we call ApplyLogOnInfo, the UserID, password, server name and database name is resetted to the values defined in the data connection within the report (SQL Server, used in the desing phase as mentioned above).
Any ideas, what we are doing wrong?
Kind regards,
Markus
Edited by: X-Giesi-X on Feb 10, 2010 4:53 PM

Hi Markus
OK. Make sure you have the latest updates. First apply SP 2:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Than FP 2.4:
https://smpdl.sap-ag.de/~sapidp/012002523100001024152010E/cr2008_fp24.zip
Next, open the report in the CR designer and enable the "Verify on first refresh" option (File | report Options)
If that does not help, export the report to rpt file format and try to view the exported report in the CR designer. What do you see?
Ludek

Getting around commiting at task to hardware in DAQmx and maintaining HW timing when switching between two AI tasks.

I have a project that requires two HW timed AI task that are triggered at different rising edges. I originally started with an example vi that has HW timed retriggerable AI that seemed to working fine until I decided to capture two channel with a seperate task. I received error messages due to the orginal task being committed to the hardware that prevented the second task for being configured due to reserved resources.
I was able to changed the commit to verify and switched from a analog edge trigger to a digital edge so I could use another PFI for triggering the second acquisition and the program seems to work fine at the momment.
Questions that I have are:
What exactly do verify, reseve and commit refer to in regards to task setup and impact on task switching delay. What information is actually transfered when configuring the task and what are the typical delay times for switching between tasks for the task controls listed above on a PCI6071e card. I am concerned that HW timing may have been sacrificed in order to work around the reserved resources and that if someone bumps the mouse the timing sequence will miss a trigger due to an IRQ.
Any information on this topic would be greatly appreciated.
Kindest Regards,
Bill

Lon,
Thanks for the reply. I have another related question in regards to configuring the read property node for a digitally triggered start-stop routine with 2 presamples and collecting 5 samples per channel on 14 channels. Triggering occurs at 500 Hz and the total sampling time for all channels is restricted to 500 us max. I am current dealing with a single AI task and having difficulty capturing all the data in an output file. I have tried using a large array to store the data until the test is complete then write the array to a file to see if the file I/O was the problem. It did not work.
I have looked the the vi and information with respect to "How do I use digital triggering to start and stop AI". The description included with the vi indicates that the read property "Relative to" must be set to current read position and the buffer definition modified to something hugh in order to keep the ahead of the write. I have tried this and cannot seem to capture the correct number of bytes in the output file. I have tried different "Relative to" settings and offsets with no luck.
A quick summary of the test is 1000 cycles with 5 samples per channel on 14 channel captured twice during each cycle. Data read as I16 (2bytes). Neglecting the 300-500 bytes in the test comment header, the file should be in the 112k range (1000*5*14*2*2). When I do happen to collect some data the file size is either way too small or much larger than expected.
All this information to ask the simple question; How do I configure the read properties to make certain that I collect all the data and store it in a file.
I apologize for running on about this problem, but I am getting really frustrated with this.
Kindest Regards,
Bill

Master is always switching between the same two members.

Hi all,
We have observed that our replicated environment, is always switching between the same two members even though there are other members with more cpu power.
As said on message {message:id=4169549}: "+In the event of a tie, an arbitrary, but predictable attribute is used to break the tie. In the current release, that tie breaker is an implementation artifact, and is not available through the public API.+"
I know the availability of "je.rep.node.priority" property but, is it possible to set a custom tie breaker or add some king of randomness to the default tie breaker?
BR,
/César.
Edited by: Cesar Alvarez on 04-jul-2011 18:05

Cesar,
No, currently there is no way for the application to influence the election, except through the use of je.rep.node.priority. However, is it possible to use node priority to achieve your goals? If use a positive priority value for all nodes (and avoid using zero), elections would make this choice:
- first consider nodes with most recent log files as master candidates
- node priority used as a tie for those most-recent nodes.
Since node priority is mutable, you could even change the node priority randomly on each node, which is rather awkward, but would work.
Out of curiosity, could you tell us your motivation for injecting some randomness into the master selection? We understand that some nodes have more resources and should be higher priority, but have not thought about why randomness would be useful.
Linda

Current position variable?

If I have several items that move across the screen but the user can click any of them at any time, how do I record the current position of any of the items item in order to use that data to change the position of the item after the user clicks?
This is what I am doing: I have 11 images that slide accross the screen. The user can click any of them at any time. When he clicks one I am scaling the image so it looks like it is comming forward (z axis) and then the rest of the images are scaled down so it looks like they are going back on z axis. So what I am trying to do is get the current position of the image when the user clicks the image so that I can use that to correctly estimate the scaling and moving of the image to make it look like it scales from the center and not from the top left corner.
So if have a variable that gets the current position of the image being clicked I'm thinking I can change its position using something like: x = currentposition + -45;
Thanks for any input!

thanks : )
I see what you mean, I do need to add more data so you see what I'm working with!
I have 11 images loaded and put through an array and then assigned to buttons: b1, b2, b3 etc which are sprites.I then placed them across the stage evenly (they are not all on the stage at the same time. They slide on from the right and go off to the left till the 6th btn is in the middle of the screen. there are about 3 images on the screen at one time). Each one of the images is a btn which will lead to its respective part of the flash project. Each of the buttons are in one movieclip called imageLoaderHost.
I have backbtn and nextbtn which moves the images right or left. I think that should give you a good amount of data as a base to understand what I am doing with the following code now:
          public function setBtns():void {
               btnNext.dir = -1;
               //btnNext.limit=stage.stageWidth-imageLoaderHost.width;
               btnNext.addEventListener(MouseEvent.CLICK, shiftF);
               btnBack.dir = 1;
               btnBack.addEventListener(MouseEvent.CLICK, shiftF);
          function shiftF(e:MouseEvent):void {
               //trace(shiftamount);
               var mc:MovieClip = MovieClip(e.currentTarget);
               var destX:Number = imageLoaderHost.x+ mc.dir * shiftamount;
               trace (destX<stage.stageWidth-imageLoaderHost.width, destX<0);
               //TweenLite.to(imageLoaderHost, 4, {x: destX, ease:Quad.easeOut});
               if (destX>0) {
                    //trace ("if executing");
                    TweenMax.to(imageLoaderHost, 1.3, {x: 25, ease:Quad.easeOut});
               }else if(destX<stage.stageWidth-imageLoaderHost.width) {
                    //trace ("else if executing");
                    TweenMax.to(imageLoaderHost, 1.3, {x: stage.stageWidth-imageLoaderHost.width, ease:Quad.easeOut});
               }else{
                    trace ("last else executing");
                    TweenMax.to(imageLoaderHost, 2, {x: destX, ease:Quad.easeOut});
          public function onButtonClick(e:Event):void {
               var namesArray:Array = ["b1","b2","b3","b4","b5","b6","b7","b8","b9","b10","b11"];
               var buttonWanted:String = namesArray[Number(e.currentTarget.name)];
               switch (buttonWanted) {
                    case "b1" :
                         break;
                    case "b2" :
                         break;
                    case //ETC ALL THE WAY TO B11
So, that all works fine and dandy! So now I am trying to make it so I can pull the x of any of the buttons at any time (or at least 1 of the the 3 that are one the stage at that time) and assign it as a sort of x value so that I can use that to scale it so it looks correct. I will have to scale it and move it at the same time so it looks like it is being scaled from the center because I have the reg point set to the default left top corner and that is what all of my current code is written around.
Hopefully that was not toooooo long winded and my words are somewhat understandable!

Current position in image resets upon switching between images

Similar Messages

Maybe you are looking for