Current position of Cursor in TextEdit Element

Hi
I would like to know how can i determine the current position of the cursor in general.
I would also like to know the current position of the cursor in textedit element.
Regards
Piyush

I checked the property, but it does not fulfill my requirement.
What i want is:
There is a view with several textedit/input elements, say A,B,C....n
There is a Helper Function Button, But.
Now when the user clicks on the button, i need to add a text, 'HELLO' in the element where the cursor is currently positioned.
So in other words, the focused element will be appended by text 'HELLO'...
So if i can find out the focused element, then i can append the text.
Now my question is how do i find out the focused element in the view.
Regards
Piyush

Similar Messages

Utilizing the cursor's current position in an action?

I had hoped this would be an easy thing to achieve but I have yet to find a solution after searching for many hours. Basically I want to use the current position of the cursor as a variable in an action, rather than the exact XY coordinates as recorded during the making of the action. More specifically I want to bucket fill a particular part of the image based on where my mouse is at the time of executing the action.
Any ideas? And with something this simple, would I even need to use a script? Any kind of help would be greatly appreciated!

Hello there,
I'm also facing the same problem...
Have you found any solution or work-around yet?
The code i'm using is the following:
IS
CURSOR cur_autonum
IS
SELECT an_nr + 1
FROM autonum
WHERE an_kode ='ADV'
FOR UPDATE OF an_nr NOWAIT
RECORD_NOT_FOUND EXCEPTION;
RECORD_IS_LOCKED EXCEPTION;
PRAGMA EXCEPTION_INIT(RECORD_IS_LOCKED,-54);
BEGIN
OPEN cur_autonum;
FETCH cur_autonum INTO :ptperson.pe_nr;
IF cur_autonum%FOUND
THEN
UPDATE autonum
SET an_nr = :ptperson.pe_nr
WHERE CURRENT OF cur_autonum;
CLOSE cur_autonum;
ELSE
     CLOSE cur_autonum;
     RAISE RECORD_NOT_FOUND;
END IF;
EXCEPTION
WHEN RECORD_NOT_FOUND
THEN
:global.rc := fnc_alert(118);
clear_record;
previous_record;
RAISE Form_Trigger_Failure;
WHEN RECORD_IS_LOCKED
THEN
IF cur_autonum%ISOPEN
THEN
CLOSE cur_autonum;
END IF;
:global.rc := fnc_alert(119);
clear_record;
previous_record;
RAISE Form_Trigger_Failure;
WHEN OTHERS
THEN
IF cur_autonum%ISOPEN
THEN
CLOSE cur_autonum;
END IF;
RAISE;
END;
greetings,
Emiel

Consistant Scrolling position between cursor keys and mouse - how to do it??

When I read with Adobe Reader, I often use the mouse on my laptop and scroll the pages down with the scrollbar and then become engrossed in reading the article.
Being engrossed, however, I also sometimes press the cursor down key, with the expectation that it will scroll the page down from the current position I am reading from.
Unfortunately it jumps to whereever it was 50 or so pages before, or to the start and I have to mess around trying to find my place.
It's deeply, deeply irritating and slows down my reading significantly.
I have read all the Adobe reader help and settings, but cannot find anywhere I can change this behavour. I
Anyone else affected by this and if so how did you overcome it?

I shoud be clearer and say that it jumps to wherever the cursor was last placed by the cursor keys.
Can't believe its just me who has this problem....

How to maintain position of cursor while in split screen view?

When I'm in split screen view, how do I position the cursor at a specific point on the code side and then shift focus to the design side without relocating the cursor?

Sorry, but the key phrase I used was "shows up". If you can't see it, you don't feel comfortable that it IS where you want it to be.
Sure it works the way you said, but the comfort level of seeing it in the right place is missing.
Another way of positioning elements in relation to tags is to use the Tag Selector at the bottom of your Document Window. Click the tag name in the Tag Selector, and the entire Tag and contents is highlighted. Then either strike the left arrow (to go before the tag) or the right arrow (to go after the tag), and you will be precisely positioned vis-a-vis the tag.
Z

Stepper motor 8SMC1-USBhF and power meter PM100D: how to merge the two VIs into one and make a XY graph of the current position and the power

Hi there,
I have a stepper motor (8SMC1-USBhF) and a power meter (PM100D). I want to measure the power while the stepper motor is moving, and obtain an XY graph with the current position on x axis and the power on y axis. So I just merged the two VIs together by copying and pasting, and created local variables for current position and readout value, and changed them to read, and then linked them to the XY graph, but apparently it doesnt work.
So could you please instruct me how to merge them and obtain an XY graph appropriately?
Attached are the two VIs.
Thank you!
Attachments:
PM100D Simple Example.vi ‏42 KB
StepperMotor.vi ‏97 KB

Hello,
The XY graph requires that each datapoint on the X axis corresponds to a datapoint on the Y axis. To create XY data you will need to creat two arrays of X data and Y data with the same amount of elements then cluster the two arrays together to wire into the XY graph. As an example take a look at the VI snippet below. Is there a specific error being thrown?
Regards,
Isaac S.
Applications Engineer
National Instruments

How to position the cursor in a text

I there a better way to position the cursor in a text portion other than trying it several times until the OS picks the right space? I know the iPad has a good way to do it by zooming in.
Or is RIM working on it.....

I've been pretty successful at getting the cursor to hit where I want in text entry boxes.
Maybe some more practice will make perfect. Worked for me, until I got used to,and then again maybe my using a touchscreen smartphone, the process just comes second nature for me.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error in TCode iview Select a line or position the Cursor correctly

Hi All,
I am getting the below error while selecting the row in Tcode iview
Select a line or position the Cursor correctly.
You have not selected a delivery or a delivery item for processing and the cursor is not positioned on a valid line, even after i am
selecting the Delivery and click on the execute button
My system config :
NW04s SP 20
Thanks&Regards
Murthy

Hi Murthy,
Create the Iview again.Hope the issue will resolve.
Thanks,
Arun

Is there anyone there? I hope there is someone who can you understand this problem and have the common sense to respond? I open gmail. I want to save an email to one of my folders. I position my cursor over the appropriate Folder icon or by choice, to th

Is there anyone there? I hope there is someone who can you understand this problem and have the common sense to respond?
I open gmail. I want to save an email to one of my folders.
I position my cursor over the appropriate Folder icon or by choice, to the Trash.
The friendly finger pointing cursor icon changes to an arrow icon.
The hand icon allows me flawless access to opening and/or moving emails.
The arrow, however does not open the link.
On the Google menu bar the cursor hand with finger opens the links to Everett (my name), Search, Images, Maps and Play.
When I attempt to open the remaining links in the menu bar (YouTube, News, Gmail, Drive, Calendar and More) the arrow icon replaces the hand. The arrow icon does not work. It will not activate these links. Nor does it open email messages in the Inbox.
Usually I reset, even reboot Safire and sometimes the problem goes away, then reappears.
Can you imagine if this condition should it happen to a tech savvy Google Support person? Perhaps one can share and make my problem go away.
I am considering dropping Google as my mail source. Unfortunate!
Everett Halvorsen
[email protected]
718.490.3824

I have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.

Fix for broken tool cursors in PS Elements 7 with Windows 8.1?

I have Photoshop Elements 7 and have been perfectly happy with it for editing photos/images as a hobby on my older Windows XP and Windows 7 PCs. I have no real need to upgrade to Photoshop Elements 12. I just installed Windows 8.1 on my new Surface Pro and now all the tool cursors in PS Elements 7 are broken. Reinstalling PS Elements 7 did not work. All the tools which use an actual graphic for a cursor appear distorted. What can I do to fix this?

Generally that's caused by the system dpi scaling
(the triple cursor effect)
Go to Control Panel>Appearance and Personalization>Make text and other items larger or smaller
Then try adjusting the size to Smaller
You might have to use Let me choose one scaling level for all my displays and use the Custom sizing options and choose something like 124% or 149%

How to position the cursor at the end of the text with EDIT_TEXT?

Hello, it wanted to ask to them if somebody could make work the module of function EDIT_TEXT so that it positions the cursor at the end of the text that is visualizing in the text editor. In the documentation it says that passing a ' X' to him in the field scrollend of the parameter Control is obtained that operation. Nevertheless, I did this and the cursor continues appearing at the beginning of the text that visualizes.
Somebody could help me please?
Regards,
Gabriel
PD: The code that I use is the following one:
FORM f_ingresar_comentarios.
DATA: l_action,
l_result LIKE itcer,
l_pedido LIKE thead-tdname,
li_coment_save LIKE i_comentarios OCCURS 0,
li_coment_aux LIKE i_comentarios OCCURS 0 WITH HEADER LINE,
l_lines TYPE i,
l_lines_save TYPE i,
l_lines_insert TYPE i,
l_index TYPE i,
l_index_aux TYPE i,
l_insert,
lwa_control LIKE itced.
CLEAR: l_action.
CLEAR i_comentarios.
REFRESH: i_comentarios,
li_coment_save,
li_coment_aux.
l_pedido = v_pedido.
Leemos el texto si es que existe
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = v_id_text
language = sy-langu
name = l_pedido
object = c_ekko
IMPORTING
header = wa_cabecera
TABLES
lines = i_comentarios "Lineas de texto leídas
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
Armamos la cabecera por primer comentario para el pedido
CLEAR wa_cabecera.
wa_cabecera-tdobject = c_ekko. "Objeto en tabla TTXID
wa_cabecera-tdname = v_pedido. "Nro de pedido
wa_cabecera-tdid = v_id_text. "ID en tabla TTXID
wa_cabecera-tdspras = sy-langu. "Lenguaje
wa_cabecera-tdlinesize = 70.
ENDIF.
Salva comentarios originales
li_coment_save[] = i_comentarios[].
lwa_control-scrollend = c_x. " c_x = 'X'
Abre el editor de texto
CALL FUNCTION 'EDIT_TEXT'
EXPORTING
header = wa_cabecera
save = space
control = lwa_control
IMPORTING
newheader = wa_cabecera
function = l_action
RESULT = l_result
TABLES
lines = i_comentarios
EXCEPTIONS
object = 1
id = 2
language = 3
name = 4
linesize = 5.
Si cambio los comentarios, actualiza comentarios
CASE l_action.
WHEN c_unchanged.
WHEN c_delete.
WHEN c_update OR
c_insert.
Obtiene cantidad de lineas de comentarios originales y modificados
DESCRIBE TABLE li_coment_save LINES l_lines_save.
DESCRIBE TABLE i_comentarios LINES l_lines.
Si se insertaron lineas...
IF l_lines > l_lines_save.
Calcula cantidad de lineas a insertar para luego calcular valor de
indice a partir del cual insertar los nuevos comentarios
l_lines_insert = l_lines - l_lines_save.
l_index = ( l_lines - l_lines_insert ) + 1.
Controla que al menos una de las lineas insertadas sea diferente de
blanco
l_index_aux = l_lines.
l_insert = c_n.
DO l_lines_insert TIMES.
READ TABLE i_comentarios INDEX l_index_aux.
IF sy-subrc = 0 AND
i_comentarios-tdline <> space.
l_insert = c_s.
EXIT.
ENDIF.
l_index_aux = l_index_aux - 1.
ENDDO.
IF l_insert = c_s.
Carga comentarios originales y agrega lineas insertadas
li_coment_aux[] = li_coment_save[].
APPEND LINES OF i_comentarios
FROM l_index
TO l_lines
TO li_coment_aux.
Setea variable para indicar actualizacion de comentarios.
v_comentario = 'S'.
Agrega usuario y fecha del comentario
CONCATENATE sy-uname
sy-datum
INTO li_coment_aux-tdline
SEPARATED BY space.
li_coment_aux-tdformat = '*'.
APPEND li_coment_aux.
Grabamos el texto
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
client = sy-mandt
header = wa_cabecera
savemode_direct = c_x
IMPORTING
newheader = wa_cabecera
TABLES
lines = li_coment_aux
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ENDCASE.
ENDFORM. " f_ingresar_comentarios
In addition, I made another program simpler that it uses the same functions and also have the same problem:
*& Report Y_GVA_TEXT *
REPORT y_gva_text .
DATA: wa_cabecera LIKE thead,
i_comentarios LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: l_action,
v_comentario,
l_result LIKE itcer,
v_pedido LIKE thead-tdname VALUE '3',
l_pedido LIKE thead-tdname,
c_a05 LIKE thead-tdid VALUE 'A05',
c_ekko LIKE stxh-tdobject VALUE 'EKKO',
l_lines LIKE sy-tabix,
lwa_control LIKE itced.
CONSTANTS: c_x VALUE 'X',
update VALUE 'U', "Langtext verändert
insert VALUE 'I', "Langtext eingefügt
delete VALUE 'D', "Langtext gelöscht
modify VALUE 'M', "Kein Langtext, Inlinezeile veränd.
unchanged VALUE ' '.
CLEAR: l_action.
CLEAR i_comentarios.
REFRESH i_comentarios.
Leemos el texto si es que existe
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = c_a05
language = sy-langu
name = v_pedido
object = c_ekko
IMPORTING
header = wa_cabecera
TABLES
lines = i_comentarios "Lineas de texto leídas
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Armamos las cabecera para mostrar los comentarios
CLEAR wa_cabecera.
wa_cabecera-tdobject = c_ekko. "Objeto en tabla TTXID
wa_cabecera-tdname = v_pedido. "Nro de pedido
wa_cabecera-tdid = c_a05. "ID en tabla TTXID
wa_cabecera-tdspras = sy-langu. "Lenguaje
wa_cabecera-tdlinesize = 70.
ENDIF.
lwa_control-noendlines = c_x.
lwa_control-scrollend = c_x.
Abre el editor de texto
CALL FUNCTION 'EDIT_TEXT'
EXPORTING
header = wa_cabecera
save = space
control = lwa_control
IMPORTING
newheader = wa_cabecera
function = l_action
RESULT = l_result
TABLES
lines = i_comentarios
EXCEPTIONS
object = 1
id = 2
language = 3
name = 4
linesize = 5.
Si cambio los comentarios, actualiza comentarios
CASE l_action.
WHEN unchanged.
WHEN delete.
WHEN update OR
insert.
Agrega usuario y fecha del comentario
CONCATENATE sy-uname
sy-datum
INTO i_comentarios-tdline
SEPARATED BY space.
i_comentarios-tdformat = '*'.
APPEND i_comentarios.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
header = wa_cabecera
IMPORTING
newheader = wa_cabecera
TABLES
lines = i_comentarios.
ENDCASE.

Murugesh,
I believe that you have mis-read Gabriel's problem.
Gabriel,
The cursor is not positioning at the base of the editor as you have cited.
In order to get this functionality to work, you must set the LINE_EDITOR import paramter to 'X'.
data: hdr like THEAD.
data: l_itced like itced.
hdr-tdobject = 'VBBP'.
hdr-tdname = '4000029521000030'.
hdr-tdid = 'Z005'.
hdr-tdspras = 'E'.
hdr-TDLINESIZE = '100'.
hdr-TDTXTLINES = '3'.
l_itced-SCROLLEND = 'X'.
CALL FUNCTION 'EDIT_TEXT'
    EXPORTING
    DISPLAY             = ' '
    EDITOR_TITLE        = ' '
      HEADER              = hdr
    PAGE                = ' '
    WINDOW              = ' '
    SAVE                = 'X'
      LINE_EDITOR         = 'X'   " here !!!
      CONTROL             = l_itced
    PROGRAM             = ' '
    LOCAL_CAT           = ' '
IMPORTING
    FUNCTION            =
    NEWHEADER           =
    RESULT              =
    TABLES
      LINES               = lines
EXCEPTIONS
    ID                  = 1
    LANGUAGE            = 2
    LINESIZE            = 3
    NAME                = 4
    OBJECT              = 5
    TEXTFORMAT          = 6
    COMMUNICATION       = 7
    OTHERS              = 8
Don't forget those points !!

Why is my BDC_CURSOR command not working to position the cursor?

Why is my BDC_CURSOR command not working to position the cursor? Here are the details regarding my issue.
I am writing a BDC to mass delete routing material assignments using transaction CA02. I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen. But once here, I cannot get the BDC_CURSOR command to take me into the list. Here are the commands I am using. Please let me know what I may try differently.
CA02 Material Assignment - Set position <-- this resets list of materials to correct position
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'MAPL-MATNR(01)'.    <-- this is not working to set the cursor into the list
PERFORM bdc_field       USING 'BDC_OKCODE' '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.

Thank you for your reply.
I had used SM35 to record. However, I was not aware of the "create program" feature. I had commented out a section from my previous post which I have now added back (latest code below). But it still did not resolve the issue.
When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list. I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen. I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves. But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
Here is code used. It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
CA02 Material Assignment - Set position
this code functions to position the desired material to first in screen list
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'MAPL-MATNR(01)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
Acknowledge Pop-Up Screen
PERFORM bdc_dynpro      USING 'SAPLSPO1' '0100'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=YES'.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.

Current position in ovi maps 3.06

Hi All,
I have N8 with ovi maps 3.06.
I was just wondering how to get current position in current maps, as there is no option as there was in older versions.
I click on maps and then nothing happens
Plese help
Thanks

Once you get the GPS Lock (The Red Dot stops flashing..) and start Navigation.. you will see your Location ( a small arrow ) on the map moving as you travel..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

REGARDING position the cursor at the end of the field

i friends,
i have a field having length of 20 ,i need to place the cursor at the end of the filed means at the 20 th position the cursor must be there how will i acieve this...plz help me the value which i will pass to this field is may be of character 4 ,5 what ever but the cursor will be always at the 20th position or at the end of the filed plz help me.......

parameters:pa_str(20) type c default '11111111111111111111' .
initialization. .
Set cursor field 'PA_STR' offset 20.

To position the cursor

How to position the cursor at next item if i choose kod_kat_pkj = '2' then the cursor will go(jump to) to kod_ngra ( state)
Begin
--Job categories
     begin
          select initcap(nama)
          into :lmd_pmk_pkj.kod_kat_pkjn_d
          from lmd_ref_kat_kerja
          where kod = :lmd_pmk_pkj.kod_kat_pkjn;
     exception
          when no_data_found then
               :lmd_pmk_pkj.kod_kat_pkjn_d := '-Tiada-';
     end;
--Worker Categories
     begin
          select initcap(nama)
          into :lmd_pmk_pkj.kod_kat_pkj_d
          from lmd_ref_kat_pkj
          where kod = :lmd_pmk_pkj.kod_kat_pkj;
     exception
          when no_data_found then
               :lmd_pmk_pkj.kod_kat_pkj_d := '-Tiada-';
     end;
--State if imigran
     if :lmd_pmk_pkj.kod_kat_pkj = '3' then
          begin
               select initcap(nama)
               into :lmd_pmk_pkj.kod_ngri_d
               from lmd_ref_ngri
               where kod = :lmd_pmk_pkj.kod_ngri;
          exception
               when no_data_found then
                    :lmd_pmk_pkj.kod_ngri_d := '-Tiada-';
          end;
     end if;
--State
     if :lmd_pmk_pkj.kod_kat_pkj = '2' then
          begin
               select initcap(nama)
               into :lmd_pmk_pkj.kod_ngra_d
               from lmd_ref_ngra
               where kod = :lmd_pmk_pkj.kod_ngra;
          exception
               when no_data_found then
                    :lmd_pmk_pkj.kod_ngra_d := '-Tiada-';
          end;
     end if;
exception
     when others then
     call_alert('e_alt01','POST_QUERY LMD_PMK_PKJ : '||dbms_error_text);
End;

Post-Text-Item
if :lmd_pmk_pkj.kod_kat_pkj = '2' then
     go_item('lmd_pmk_pkj.kod_ngra');
elsif :lmd_pmk_pkj.kod_kat_pkj = '3' then
     go_item('lmd_pmk_pkj.kod_ngri');
else
     go_item('lmd_pmk_pkj.bil_pkj_l');
end if;
But why when i choose 2, the cursor not jump to next item kod_ngra.

Position the cursor at the top of the JTextArea?

How do you position the cursor or document at the top of the JTextArea. When I set the JTextArea to some text that exceeds the JTextArea ScrollPane it scrolls to the bottom of the document. How do you position the document to the top of the JTextArea?
thanks,
Peter

setCaretPosition(0);

Current position of Cursor in TextEdit Element

Similar Messages

Maybe you are looking for