Current project disappeared while working in PS Touch ...

Today i started a project on PStouch and suddenly all disappeared and the tutorial side opened. And there is no access to my old projects.
I try to upload them before on the cloud but this takes to much time and there are format problems.

If you are in a Tutorial you might just advance through to the end and then choose not to save.

Similar Messages

  • Hello, All my spreadsheets disappeared while working on one of them, what to do?

    All my spreadsheets disappeared while working on one of them, what to do?

    I just did a reset all settings on both.
    Will see where this gets me.
    Thank you for your helpfull input.

  • Project file disappeared while working!!!!

    Hello, l work on a double dual core 3ghz intel mac, 8 gig of ram and a load of disk space (2 tera). Good machine. I've been editing on a network drive (full of space and very quick, far enough for sp DV, wich is the format I'm on). Now everything is working fine, no problem of anykind, files where captured on a local drive so no problem with a 2 gig file limitation. So all cool... but then suddenly while working, I choose to save my project (save) and the system tells me "file error". Impossible to save on the original location on the network. When I browse to the folder where the project is, the file has disappeared... Now the funny part comes: if I look at the same folder on an other machine, either mac or
    PC, I can definitely see the file!! It's there (good to know it's the old version, before the save and error message, so it wasn't saved at all when the problem occured). It's there but on the machine from wich I had the problem it isn't!!!! It's the second time this arrises, first time I thought "that's odd", but now it seems to me as a major issue. Hopefully when the problem came, after the "file error" message I could still save the project in another location, so I didn't loose any work - if this happens to you.
    Did anyone experience this very annoying and worrying situation? Is there a solution?
    Many thanks!
    Raphaël Grana
    PS almost forgot: if I disconnect the network drive and then reconnect it, the file is available again...

    Hello
    I think I am in the middle of a similar problem and I am not on a network. This was also going aon a few months ago.
    I would save the project and it wouldn't show up in the finder (even though I was sitting there using and working the project) or I would try to save and I would get a warning such as Unknonw file or general error.. So I would save a new version which would be fine, then that wouldn't save, and so on.... And yes if I closed the finder window and reopened it the file I saved would sometimes appear. I really couldn't figure it out. It happened on a few projects but I couldn't see any rhyme or reason.
    Eventually I reloaded FCP and all the updates again. Everything was going fine. Until last night. First I couldn't save (got the unknown file message) and then.... (arround the same time) One of my Hard drives lost all but one locked (Indesign) file!!! 148GB of media (FCP,quciktime,renders, etc) files, no warning! poof! gone! The drive was still there and passed all verification and didn't need any repair (using disc utility), all the info was gone! And I never touched it! Interestingly, I don't believe the project I was working on at the time had much to do with the Drive that lost everything. But the project I opened up just after the save problem occured did. When it opened with all of it's media "offline" (which had definitely been there earlier in the day)I discovered the disc issue.
    OK, don't know if that helps, yes I've experienced similar but don't have the answer, yet.
    Good Luck!
    Len
    powermac, G5, dual 2.0 ghz, 2gig Ram   Mac OS X (10.4.9)   Pioneer dvr -107D

  • Prores renders disappearing while working in project. Please Help?

    Hi There,
    I am having a problem when I render a sequence, creating all the video preview files and as i continue to work on the sequence, or task switch and come back to that sequence, the render files are disappearing (ie. going from green to yellow or red) and having to be re-rendered before export.
    General
    Editing mode: Custom
    Timebase: 29.97fps
    Video Settings
    Frame size: 1920h 1080v (1.0000)
    Frame rate: 29.97 frames/second
    Pixel Aspect Ratio: Square Pixels (1.0)
    Fields: Upper Field First
    Audio Settings
    Sample rate: 48000 samples/second
    RENDER:
    Quicktime
    Prores422
    1920x1080
    Max Render Quality (Checked)
    Composite in Linear Colour (Checked)
    Footage being rendered and going offline is prores422 1080i60 from an EVS XT-3 with a three way colour correction, and brightness/contrast filters on it
    I am trying to work in an end to end prores workflow with the EVS XT-3 (hence the necessity for prores all the way through)
    Preview files:
    Prores422
    I am running Premiere Pro CC on an AFP connected NAS over gigE (jumbo frames enabled on all components, Mac Mini running OSX server 10.8 fibre connected to a Sonnet RAID)
    Have tried with projects set on local drive and also on NAS.
    It appears to be something with the generation of peak files that is throwing the renders off each time? Even when you re-render. They then appear to go back offline.
    Any help or ideas would be great!
    Thanks
    Chris

    Hi smith,
    Something tells me that the files are getting confused. If new times are written into the regeneration of peak files by the server, then those files cannot be relinked. I'll look around for some answers, I know I have heard about this problem before somewhere.
    Kevin

  • Motion clip disappears while working in 3d

    In Motion 4.0.3, I'm working in 3d mode with a clip I've dropped in a drop zone.  I have also applied a False Color Filter to the clip.  When I rotate the camera angle, the clip disappears.  I think this has something to do with the filter.  How can I get the clip to remain visible the entire time?  I'm about to try to apply the filter before I export from FCP, which I think will work, but I would like to know if I can use the filter in Motion and make it work.  (The clip is exported from FCP 7.0.3 in .mov format.)

    Tried it again and applying a filter before exporting from FCP did fix the problem.  Still would like to know about the problem with applying the filter to a video clip in motion when changing camera angles in 3d though.

  • While working in iMovie, computer shut down and all imported clips from that project disappeared. The project still existed, with titles, but all video clips were gone from the movie as well as the computer library.

    Clips were imported from SD card into iMovie project. While working on the project, computer shut down. When restarted, all clips from that event were no longer in the project, or in the computer library. Project existed, with titles, but blank spaces exist where clips had been.

    OH MY GOD! This EXACT thing just happened to me! It didn't save my event and didn't show the date in the iMovie library but if I look under all projects, the project is there. Except that there are little blank place holders where all my clips were. Also the title of the project has a little yellow "!" symbol next to it which I can only assume means that the file is corrupted.
    I can't believe it destroyed like 8 hours of work!
    I have a 15" mid 2011 MBP and Mavericks OS.

  • Why did ps touch does not show saved project and my old project disappear?

    Why did ps touch (ipad 4) does not show saved project and my old project disappear?

    OldGhias,
    Have you found a solution yet? I don’t know if I will be of any help but I was curious and no one else has chimed in yet.
    I don’t quite understand all of your statement.
    To clarify, you were making SimpleSave backups from Win95 and cannot see them all on the Win7 laptop?
    Or
    You were copying files over (SimpleSave utility not used) and you cannot see those files on Win7 but you can on the Win95 machine?
    Do you have another Win7 machine you could connect the external to, to see if the files are still not showing (one that is not locked for work)?
    On the drive that shows full, can you see it in Disk Management showing the correct size of the drive and also another CD drive? Not your real CD/DVD drive, it’s actually a CD emulator that is attached to the HDD for encrypting the backups and all SimpleSave’s have them.
    Lastly, did you reformat the SimpleSave drive to Fat32 first?
    My understanding is that USB support was quite limited on Win95 machines. Since Win95 is Fat32 and the SimpleSave drive is by default NTFS, I would think it would not work.

  • External Hard Disk disconnected while rendering, project disappeared now with a yellow exclamation sign triangle. Is there a way to recover it?

    Hello,
    I was working on a project located at a library in an external hard disk. The external hard disk was disconnected while FCPX was rendering. Once it was connected back there's no project in the event, I can't find it in Finder nor anywhere else and I get a yellow triangular exclamation sign icon. Has the project disappeared? Is there a way to find it? I have no backup
    Recovering this is quite important for me.
    I'd greatly appreciate any help or tips.

    Try here for 10.1.1:
    https://discussions.apple.com/message/25059825#25059825
    Al

  • I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope y

    I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope you will find a solution for the same.Help with using Adobe Muse CC

    Thanks,
    I have tried with a new site it's working perfectly.
    See the screenshot of the error.
    Thanks for your support Rohit

  • I was working on a project in iMovie (10.0.1) and iMovie just crashed. when i reopened it the project i was working on disappeared. in my list of projects it still says i have 3 projects but its only showing me 2. is there any way i can recover my project

    i was working on a project in iMovie (10.0.1) and iMovie just crashed. when i reopened it the project i was working on disappeared. in my list of projects it still says i have 3 projects but its only showing me 2. is there any way i can recover my project?? PLEASE HELP!!!

    iMovie on your Mac  has nothing to do with iCloud storage.  Download and use Find Any File  to search for your iMovie project.  FAF can search areas that Spotlight can't, like invisible folders, packages and system folders.  If there a file with your file name on it anywhere on the hard drive FAF will find it.
    Do you have Time Machine enabled backing up to an external HD?  This situation is exactly what TM is good at.  It makes hourly backups so you can go back to find and restore the missing file.  All HDs crash at some time or another and having a good backup strategy is the only protection against that.

  • Currently i am working in InDesign CS5.5 version 7.5 i am working on a project that requires working

    currently i am working in InDesign CS5.5 version 7.5
    i am working on a project that requires working with another person who is using the latest version of CC,
    how will CC effect my current project and will i be able to share the file ?

    It could be a one way trip.
    There have been instances where your older version was more stable for CC as an exported idml.
    Prior to ver 7 (?) text engines were occasionally updated which would cause text to reflow in later versions.

  • I iPod touch too big to use while working out?

    I have an iPhone 6 plus, Is it ok if i buy iPod touch to use while working out? or will it be too big? or should i buy shuffle? Nano isn't an option because i don't use nike  or radio. I'm confused. help?

    Thats what I thought, but my mind doesn't go away from touch as it has wifi usability! I can use that at gym! And also if i feel to use the apps while i put aside my 6+ for some time as it is large, I thought of iPod touch again! OMG I'm still confused.crazy apple!

  • Speedgrade CC 2014 becoming increasingly slow while working on a project that was direct linked from Premiere CC.

    Speedgrade CC 2014 direct link from Premiere Pro CC 2014.  The application is becoming increasingly slow when making any adjustment or just selecting any buttons on screen.  While working for and hour on my project it is now bordering unresponsive.  In addition it is causing the Finder to become slow and any other applications such as Safari and Mail. 
    I'm on a Mac Pro5,1 OS 10.8.5, 6-core intel xeon 2.93GHz, 16gb Ram, Ati Radeon HD 5770 and NVIDEA Quadro 4000 cards. 
    I'm hoping this is just a setting in speed grade and not a bug.

    First, Davinci and  the Adobe DVA's (digital video apps) utilize resources very differently from each other. That said, your hardware is making me green ...
    This is something that should fly on your system, so ... I would definitely suggest my previous thing of running that benchmark testing ... it will tell you how your system runs the Adobe stuff, and indicate if anything could be modified so it would work better. Some people with FAR less a system than you're running fly through a DL session. Even my system with only four "real" cores (8 "logical" ones ... whatever ... ), 16Gb RAM, and a GTX770/4Gb vRAM and multiple internal & eSATA drives to split things up for throughput sustained stuff, has been running pretty smoothly. Even though it wasn't using much of the video card, which screams for many people in the Adobe DVA's. This latest set of improvements has pretty much nearly eliminated Sg using it ... so we'll have to puzzle out WHAT is causing Sg and the other apps to ignore my card when in identical setups it's a real beast.
    That's the kind of thing that can drive the engineers up the wall. Some of the systems that have had terrible problems such that users have been on here complaining that "no on could possibly be running "serious professional footage & effects" on a system like theirs, didn't you idiots test it?" ... have received the response ... that Kevin or Al or someone is running a completely identical system to almost all tiny respects ... and is flying with 6k footage running a ton of PrPro & Ae effects then worked heavy in Sg. And coasting at it. Not that they at all challenge that the user's system is nearly unusable at the moment ... but figuring out why on two nearly identical setups it works so differently can be rather tedious with hundreds of thousands of lines of code involved, various plugins, and maybe a 2/3rds moon on the third Tuesday.
    Like mine. I know quite a few people use this card on the Adobe apps and it's really flying for them. It's been re-installed twice on mine, Windows and all monitoring systems see it fine, but ... even after multiple installs and CC cleaner attempts and such it's not "seen" properly by any Adobe app. So ... off  to run the benchmark to see what all in my system is doing fine ... and if there's any hint as to why that card isn't getting used.
    Also ... it would maybe be useful to get Dennis Weinmann or Fran Roig to jump in, maybe get a sample of your project file or info on those LUT's or something, to see if they've got any ideas. Trouble is most of Adobe's staff is on Winter Break for the next week plus.
    Neil

  • Captivate 4 crashes while working with Power Builder projects..Can anyone help to solve this issue??

    Captivate 4 crashes while working with Power Builder projects..Can anyone help to solve this issue??

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • While working on FCPX project, power failed. Power on, restarted, opened FC, Project Library shows blank icon, no clips. Click on icon, nothing happens. Haven't done back-up. Can project be recovered?

    While working on a FXPX project, there was a power failure. Power back on, restarted FCPX, project name in Project Library is a blank icon, nothing happens when I click on it. Believing back ups were automatic and continuous, I made no back up. Can the project be recovered?

    Years of fine internet use via WIFI then randomly it starts dropping then one day (weeks later) it is no longer accessible at all and even saying "No hardware installed" when I click on WIFI icon at the top right on screen. Here is how I finally fixed it!:
    For six months I wallowed in this problem and had to connect my macbook pro to the internet via ethernet cable which as you can image was very restrictive :/
    I have had numerous laptop technicans befuddled by this WIFI problem and most concluding with how my WIFI card must be broken and that I will need to buy a new one. The last suggestion I had on the matter was to buy a USB wifi dongle.
    So I ended up buying this one, http://www.asus.com/nz/Networking/USBN10_NANO/Unfortunately my macbook pro didn't want to read the install disc and it didn't autorun so it didn't work. After reading more forums I saw that you could download the program from the net and sure enough it worked.. BUT STRANGER when I took the USB dongle out the WIFI was still working!! The program appears to have reminded my four year old macbook pro that it is indeed WIFI capable.
    So to find this miraculous program its located herehttp://www.asus.com/nz/Networking/USBN10_NANO/HelpDesk_Download/
    Same link as above just under SUPPORT>Driver&Tools
    You then click on a file when its downloaded and a file called MAC will appear, then click on install. Within 5 minutes you should have your WIFI back. My macbook pro crashed again today but without having to get the shortest ethernet cable you've ever seen out again - I was able to install the program again and WIFI was up and running once more. Moral of the story - didn't need to spend any money to fix this and not even using the USB dongle.
    So happy!! Hope it works for you too!
    This also worked on a MacBook that lost its WIFI when a user accounts password was changed and the keychain password wasn't known to them - another random way to lose WIFI apparently

Maybe you are looking for

  • Subsequent debit for a vendor before invoice??? (URGENT!!!!!)

    hi all, i want to post subsequent debit for a vendor before invoice.  but the system is giving a message "The quantity to be debited/credited cannot be any greater than the quantity invoiced so far." can anybody tell me how to post subsequent debit b

  • Isatap Adapter & Teredo Tunneling Adapter fault

    When I run my housekeeping I always have code 10 faults on the Isatap Adapter and the Teredo Tunneling Adapter. I am not sure what these do and it dosen't appear to have any effect on my laptop. Can anyone explain what these adapters do.

  • I forgot the answers to my security question.

    How do I reset my security questions?

  • What is the command for getting a screen back that disappears?

    How do I get my working screen page back when it disappears to the right from a feather like touch on the mouse? I do not know why it disappears or how to get it back. Please let me know what is the command?

  • Ipod/nano - artist list doubles

    hello. when i go play a specific artist. i have doubles (two U2's for example). i essentially can't chose the artists and then select to play all, b/c i would then have to go back and select the same artist (the repeat) to play the other few songs. i