Current Requirements / Stock using 2LIS_03_S194

Hello expert,
I need to upload in BW Current Requirements / Stock using 2LIS_03_S194 business content extractor.
Checking the data with R/3 transaction MCBZ and MD04 I noticed that data for some material are wrong. In particulat the problem occurs with materials managed with special stock to the vendor (subcontracting).
The system considers (uploading data on structure S194) the requirements
of those materials twice, as they represent a requirement for our plant
and for the vendor at the same time but the requirement is always the
same, so it has to be considered only once ---> in the structure I see
the field 'Total Goods Issue' with a non correct value (double).
This problems reflects on data exctraction for BW (data source
2LIS_03_S194).
How can I solve this problem?
Thanks
Massimo

Is there a indicator ( by means of a syetem field) to indicate a material is from plant or sub contracting? . Like for example a document type to distinguish. If yes, you can eliminate in the start routine.
Ravi Thothadri

Similar Messages

Logic for carry forward of previous stock to current period stock.

Hi Experts,
Client is using already MC.9 for see the stock analysis report, however as per there requirement we are exploring BOM as well as fetching quantity from table level as well. in my report I am experiencing difficulty to carry forward previous period closing stock quantity to current period stock quantiy, if there is no received for current period, however the same is happens in MC.9
Could any one tell me what is the logic behind MC.9 which is do carry forward previous period closing stock to current period stock quantity in report.
As per the requirement I am using S031, S032,S033, however unable to get logic for carry forward the previous month stock quantity to current month.
have a requirement of creating a report of showing material stock period wise for each plant in below mention format.
Header 1
Header 2
Header 3
Header 4
LFGJA/LFMON
ROH (MT)
HALB (MT)
FERT (MT)
11.2013
100.000
121.000
121.00
12.2013
50.000
12.000
123.00
01.2014
23.231
.23.234
45.342
02.2014
23.231
34.094
45.098
03.2014
34.098
98.983
00.000
04.2014
00.000
69.093
98.098
05.2014
00.000
89.098
00.000
For Example Break up of ROH material plant wise in below mention format.
LFGJA/LFMON
WERKS
MENGE (MT)
11.2013
P001
30.000
11.2013
P002
50.000
11.2013
P003
20.00
Thanks in advance,
SKN

Hi,
The last period closing stock = current period opening stock. You may get the details from MBEWH and S032 tables. Refer the doc: Material Stock and Valuation History tables - how to read them
Regards,
AKPT

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

'''Anonymous'''
Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
'''chris'''
'''''Crashing'''''
See:
http://support.mozilla.com/en-US/kb/Firefox+crashes
http://kb.mozillazine.org/Firefox_crashes
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
http://support.mozilla.com/en-US/kb/Firefox+will+not+start
http://kb.mozillazine.org/Browser_will_not_start_up
'''''Hanging'''''
See: http://support.mozilla.com/en-US/kb/Firefox+hangs
'''''Hanging at exit'''''
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''''Safe Mode'''''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''chris'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''Update Shockwave for Director (aka Shockwave Player)''': your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (important security update released 2010-05-11; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

I've backup my iPhoto on WD My Passport. When I try to pull up the photos from the external hard drive onto a different computer, it says "You can't open your current photo library using this version of iPhoto." It says I have to use a later version.

After backing up my photos on a My Passport hard drive I can't open iphoto from the hard drive. It says "You can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto." I have done all the upgrades for iphoto. Anyone know what I'm doing wrong?

What versions of iPhoto and OS X are on each computer? You can find out by going to your iPhoto application (from the Applications folder), clicking it once to highlight it, and click cmd-i to open its information window. The version number is in the General tab.
Your version of OS X can be found from the Apple menu, then About This Mac.
The latest version of iPhoto (9.5.1) requires OS X 10.9, so if you have an older version of OS X on that computer, you will have to upgrade to Mavericks and then upgrade to the newer iPhoto.
Matt

Restricted stock used in intra-company stock transfer

Hi,
Can anyone give me the link about the description and difference between unrestricted stock, restricted stock and blocked stock?
And for intra-company stock transfer(in one company code), I would like to post goods issue with restriced stock. and in inter-company stock transter and third-party sales, I would not like restricted stock to be used. How can I configure in system?
Many thanks,
Aries

Hi Attila,
Thank you for your informaiton.
For different delivery types, such as LF, NLCC, NL, the checking rule are all the same. It is very unreasonalbe
because for NL(stock transfer under one company code), we would like restricted stock used and for LF and NLCC, we only want unrestricted stock. Due to the same checking rule for all the delivery types, changing checking rule will not meet the requirements for all the types. If there is a customizing to set checking rules for different delivery types. If there is not, how can I do modification to meet our requirement?
Many Thanks
Aries

Getting current date without using client's clock

Is there a way to get the current date without using client's clock?
The java application we developed has many windows on which the Current Date is an important display field. As it's used 24x7, we need to make sure the date is current.
Right now, we make a CORBA service call to get the date from the server everytime the user Resets any of these windows. This is causing a peformance issue due to the slow service call.
Is it possible to get the Date once from the server and then start a timer to derive the date thereafter. Will a change in the client's clock affect this logic ? Can we implement this without using client's system time.
Or is there another better way ?
Thanks for your help.

If I can summarize your current requirements:
1. You need to know the time.
2. You don't trust the client's clock so you want to get the time from another computer.
3. You want this access to be "not too slow".
I find requirement number 2 to be peculiar, I've never seen an application that doesn't accept the time on the client system as valid. However, there it is. Maybe it's a system for checking employees in and out, and the smarter ones have been faking out the system by changing the clock. If your CORBA connection is too slow, and NTP is too slow (it takes the little program I got from USNO about 3 seconds to synchronize my clock), why not write your own time server? A simple web server that returns only the time to any request would work. If that's not fast enough then I'd suggest you're out of luck.

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

HT204268; I have purchases on an aol login pre 2008 and all recent stuff under an apple id. I currently see and use everything when i login with the apple id. After March 31st will my apple id account still show and contain all?

HT204268; I have purchases on an aol login pre 2008 and all recent stuff under an apple id. I currently see and use everything when i login with the apple id. After March 31st will my apple id account still show and contain all?
I understand the instructions to create a new account id (apple id) from the old aol account. However, does this mean my purchases will be split into 2 accounts; or does the fact that I currently see everything under my apple id (regardless of the purchased by username) mean this will all still appear in my current account as it does now?

You see them where when you login your non-AOL account ?
If you currently have two accounts (the AOL username account and an email address account) then you will continue to have two accounts, and nothing should change when you update the AOL account to be an email address (apart from how you access that account).
You will just be renaming the account to have an email address for accessing it, not creating a new account.

I have the current iPhoto when I try to open it I get an error message You can't open your current photo library using this version of iPhoto

You can’t open your current photo library using this version of iPhoto.
I am using the current iPhoto and O/S 10.8.2

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Can't open current photo library using this version of iPhoto 7.1.5

I have recently had to perform a disk repair due to the disk image not mounting. In this process I completed a full backup of my home folder and verify/repair/format of my harddrive. At this time I also added 4G RAM bringing the MacBook up to 5G RAM.
Since the reinstallation of 10.7.5 (Which took about 18hrs) I have none of the iLife package. I have reinstalled from the original disk that I recieved on initial purchase back in 2008. After installation I ran the software update and have updated everything (iTunes, iPhoto etc) I have been able to import all data from my backup via a simple drag & drop. I am now unable to open my iPhoto library (file size 105.43G). I have searched many forums and have been unable to find a solution that is suitable (rebuild library) because as soon as I launch this option it brings up the following message:
You can’t open your current photo library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
After this I must quit the application. What am I missing? I'm sure it is something quite simple... I'm hoping it is as easy as it was to find the recoveryHD during the reformat of the disk.
Any help would be greatly appreciated, Cheers.

It sounds like a damaged library. Try the 2 fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the last three options.
Fix #2
Rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be untouched for further attempts at fixing or in case the rebuilt library is not satisfactory.

Can't open iPhoto after installation .Displays message :You can't open your current photo library using this version of iPhoto

Can't open the program after Installing . Shows message " You can't open your current current photo library using this version of photo.
Made several attemps in fresh instalaltion without any success.

So I assume it is version 9.3, not sure?
Look at the application in the Finde, if you cannot launch it.
Select your iPhoto application in in the Applications folder and use the command "File > Get Info". What does the Info panel show in the "General" brick?
If it says 9.4.3, try to launch iPhoto by clicking the iPhoto icon in the Applications folder. Does that work?

Yet AGAIN! "You can't open your current photo library using this version of iPhoto"

I have read every thread on this topic I could find in these forums, and tried most solutions, and I still can't get iPhoto to work.
Equipment: MacBook Pro June 2010, OS 10.6.8. Bought a Macbook Air February 2012, OS 10.7.2
Not sure why, but I can't open iPhoto. Here's what I have tried.
Original message on MBPro: "You can’t open your current photo library using this version of iPhoto".
1. Tried to rebuild library as per this thread https://discussions.apple.com/message/8429269#8429269. I get the list of checkboxes, but when I hit "okay" I get the same "you can't open your current photo library ..." message again.
2. Ran software update - no sign that iPhoto is out of date.
3. Copied new version of iPhoto from brand new MBAir to MBPro, replacing older version . Got same "you can't open your current photo library ..." message again.
4. Tried to rebuild library using new version of iPhoto - guess what - same message.
5. Downloaded free trial version of iPhoto Library Manager as suggested in the thread referenced above. The dmg loads to my desktop just fine but nothing happens when I click on it -- this has never happened before. Perhaps it is looking for iPhoto, which of course I can't get to work.
So I have been unable to access my old iPhoto library with (sob) thousands and thousands of family photos in it. I run TimeMachine on to an external hard drive every hour so I hope that if my iPhoto library is corrupted, there is a safe copy on that external drive ...
Between this hassle -- hours of time wasted -- and recent debacle of upgrading iTunes which erased my library and all of my playlists, which also took hours and hours to restore ... my 25 year devotion to Apple products is taking a major hit. I'm getting very weary of heart-pounding fear every time a new software upgrade arrives ... but that's a topic for another time. ;-)
Thank you very much indeed for all suggestions.

I'm going to start from scratch as the link you references is very, very old.
Try this: launch iPhoto with the Option key held down and try to create a new, test library and import some photos. If you are able to then the problem lies with your current library. If you get the same message then maybe the iPhoto application is the problem.
Try the following again: make a temporary, backup copy (if you don't already have a backup copy) of your library and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If all of these fail there's one more option:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the each subfolder in the Originals folder (iPhoto 09 and earlier) or the entire Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects.
OT

You can't open your current photo library using this version of iPhoto.

I tried to open iphoto this morning and recieved this message: "iphoto damaged or incomplete." There was also a white circle with a slash through the icon in both dock and applications folder. Recently I had loaded idvd from ilife since it was not included on my MBP. I reinstalled iphoto using the disc and then the following began to occur.
I received this message when I tried to launch iPhoto after reinstalling. Yesterday it was working fine. "You can’t open your current photo library using this version of iPhoto." It gave me the option of quitting but nothing else.
I followed directions on another thread to rebuild using the database by holding down command+option while launching iphoto. None of my folders came back and all the photo boxes are empty, although there are dates.
I do have a backup on an external but am not sure how I would restore using that (I've never had to in the past).
This is iphoto 11 - version 9.1. I am unsure how to check what version was installed when I purchased this MBP (Nov. 2012). I am also runnign OSX 10.8.3
Is there anyway to remove the update and recent install and revert to what I had yesterday? Or even two days ago?
Any help would be appreciated. I don't want to have to re-create my folders.
Thanks in advance!

When you installed iDVD, you must accidentally also have reinstalled and downgraded iPhoto.
This is iphoto 11 - version 9.1. I am unsure how to check what version was installed when I purchased this MBP (Nov. 2012). I am also runnign OSX 10.8.3
You have two options, either delete your current iPhoto version and reinstall iPhoto from the AppStore, or go to the -menu and run Software update to upgrade your current iPhoto version to iPhoto 9.4.3, the current version.
To reinstall: See this document http://support.apple.com/kb/ht4718
Scroll down to the paragraph: Restoring iLife applications after Internet Restore of OS X Lion or OS X Mountain Lion
It explains how to reinstall the bundled iLife applications, that came preinstalled, from the AppStore.
Regards
Léonie

After installing ilife '11 when i opened iPhoto its display a message"You can't open your current photo library using this version of iPhoto, what can i do sir??

i buy apple mac book on 12.04.2012, mac osx 10.7.2, 500gb hdd,4gb ram, i installed ilife '11 in it, after installing ilife '11 when i opened iPhoto its display a message"You can’t open your current photo library using this version of iPhoto,You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library? but option coming only quit, when i check for software update it shows ur software is up to date, waht can i do sir, how can i use my iphoto???

Make sure you are updated to the latest version - 9.2.1
LN

I cant open my current iPhoto library using this version (8.1.2) of iPhoto

I recently (August 2014) bought a new macbook pro with OS X Maverick 10.9.4 and I have an old white macbook with OS X 10.7.5. I went to the apple store to transfer all of my data from my old mac to my new mac. Everything synced except for my photos in iPhoto, which I had alot of. The people at apple sent me home with cable cords to try syncing my iPhoto again but when I got home to open my iPhoto on my old mac, the app gave me a message that had the title "You can't open your current photo library using this version of iPhoto" and with the subtext "You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto." The message gives me a 'quit' button and that's it. My time-machine also doesn't work (which is a whole different story) so I can't use that to get to my iPhoto. I'm not sure if purchasing the new version of iPhoto on my old computer will work because I'm not sure if it will have all of my old photos in it that I need to access. I just really want my old iPhoto back with all my wonderful pictures

Connect the two systems together and drag the iPhoto library over from the old system to the pictures folder of the new system and launch iPhoto on the new system
LN

Current Requirements / Stock using 2LIS_03_S194

Similar Messages

Maybe you are looking for