Current security status of IOS7

my wife an I share an iphone 4s running IOS8, but need a second phone when we are apart. I have a chance to get an iphone 4 from a friend, but this is running IOS7, and is not supported by IOS7. Would the iphone 4 still be secure for emails in particular if we link it to the same apple ID.

Hi,
Go to the System and click on Status on your Easy access menu.
you can see the Patch.

Similar Messages

  • One or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.

    hi All,
    i have one of the requirement for an application, we do upload some release not in file server and that is used in application link to see the note. in this note i have converted the Excel into .HTM format(web page). this was working fine, but from last
    two days all of a sudden we are recieving error as above.
    one or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.
    could anyone please help me on this.
    Thanks and Regards,
    krishnamurthy

    Hi,
    Actually Arnavsharma provided a operable method for you. But no luck, it's not invalid.
    Here I also offer you an method you can try.Please delete the extra (parasite) zone from the Zones subkey :
    Click Start , click Run , type regedit , and then click OK
    Expand the following registry subkey
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones
    Delete the extra (parasite) zone from the Zones subkey
    Note: The parasite zone is a pseudo-graphic number listed before zone number 0. The pseudo-graphic number looks like a miniature upper case "L"
    Close the registry editor
    Thanks!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • BSP: Use of dynpro services is not possible in the current system status

    Hello,
    in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
    Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
    If i test the method this works fine.
    If i call this method in my eventhandler i get BSP error:
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    Use of dynpro services is not possible in the current system status
    Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
    Error Name
    Program ZCL_CRM_CS_DATA_SERVICES======CP
    Include ZCL_CRM_CS_DATA_SERVICES======CM001
    ABAP Class ZCL_CRM_CS_DATA_SERVICES
    Method CREATE_CS_ORDER
    Line 54
    Long text -
    Error type: Exception
    Any ideas?
    thank you
    Best regards

    Hi,
           Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
    Regards,
    Arun Prakash

  • CRM70 Use of dynpro services is not possible in the current system status

    Hi all,
    i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
    I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
    Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    Use of dynpro services is not possible in the current system status
    Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
    Could one of you experts please give me a hind?
    Thank you
    Kind regards
    Manfred

    Solved,
    there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
    Kind regards
    Manfred

  • Use of dynpro services is not possible in the current system status

    Hi,
    I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA,  working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
    "Use of dynpro services is not possible in the current system status"
    not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
    Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
    Error Name DYNPRO_SEND_IN_BACKGROUND
    Program SAPLSKEY
    Include LSKEYU03
    Line 33

    Hi Keith,
    Welcome to the SCN forums!
    SAPLSKEY
    You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
    In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
    Regards, Trevor

  • The server principal "XYuser" is not able to access the database "Ydb" under the current security context

    SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
    The server principal "XYuser" is not able to access the database "Ydb" under the current security context
    This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

    This appears to be a Login/Database Mapping issue.  I was having this problem, but was able to resolve it as follows:
    Using the SQL Server management Studio:
    In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins. 
    That is: ServerName -> Security -> Logins
    NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
    Select the Login that is having the troubles.  Right click on the Login and select ‘Properties.’
    The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to.  When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself).  Map the Login by checking the box next to the database name.  Set the default schema.  Then select the roles for the Login in the Database role membership list box.  I selected db_datareader and public.  After clicking OK to save the changes, the problem was resolved.
    In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

  • My software is STUCK on "Retrieving current session status" What is this and how do I fix it? i am not able to convert any files at all!! Please help!

    My software is STUCK on "Retrieving current session status" What is this and how do I fix it? i am not able to convert any files at all!! Please help!

    Hi JulietaQ,
    In order to help you better.
    Please let me know which application or Service of Adobe you are using. If this is subscription i would request you to log-out and log-in back and let me know if that helps.
    ~Ajlan Huda

  • Cannot convert pdf to word - just spins and says retrievin current session status - has been doing it for days

    Cannot convert pdf to word - just spins and says retrievin current session status - has been doing it for days

    Hi da522811,
    Are you still having trouble converting files? It sounds as though you may be trying to convert via Reader, is that correct? If so, please try logging out, and then logging back in. You may need to log out via the web interface at https://cloud.acrobat.com if you don't have access to the Sign Out button in Reader.
    Please let us know how it goes.
    Best,
    Sara

  • Current Security Context Not Trusted When Using Linked Server From ABAP

    Hello,
    I am experiencing a head-scratcher of a problem when trying to use a Linked Server connection to query a remote SQL Server database from our R/3 system.  We have had this working just fine for some time, but after migrating to new hardware and upgrading OS, DBMS, and R/3, now we are running into problems.
    The target database is a named instance on SQL Server 2000 SP3, Windows 2000 Server.  The original source R/3 system was 4.7x2.00, also on SQL Server 2000 (SP4), Windows 2000 Server.  I had been using a Linked Server defined via SQL Enterprise Manager (actually defined when the source was on SQL Server 7), which called an alias defined with the Client Network Utility that pointed to the remote named instance.  This alias and Linked Server worked great for several years.
    Now we have migrated our R/3 system onto new hardware, running Windows Server 2003 SP1 and SQL Server 2005 SP1.  The application itself has been upgraded to ECC 6.0.  I performed the migration with a homogeneous system copy, and everything has worked just fine.  I redefined the Linked Server on the new SQL 2005 installation, this time avoiding the alias and referencing the remote named instance directly, and it tests out just fine using queries from SQL Management Studio.  It also tests fine with OSQL called from the R/3 server console, both when logged on as SAPServiceSID with a trusted connection, and with a SQL login as the schema owner (i.e., 'sid' in lowercase).  From outside of R/3, I cannot make it fail.  It works perfectly.
    That all changes when I try to use the Linked Server within an ABAP application, however.  The basic code in use is
    EXEC SQL.
       SET XACT_ABORT ON
       DELETE FROM [SERVER\INSTANCE].DATABASE.dbo.TABLE
    ENDEXEC.
    The only thing different about this code from that before the upgrade/migration is the reference to [SERVER\INSTANCE] which previously used the alias of just SERVER.
    The program short dumps with runtime error DBIF_DSQL2_SQL_ERROR, exception CX_SY_NATIVE_SQL_ERROR.  The database error code is 15274, and the error text is "Access to the remote server is denied because the current security context is not trusted."
    I have set the "trustworthy" property on the R/3 database, I have ensured SAPServiceSID is a member of the sysadmin SQL role, I've even made it a member of the local Administrators group on both source and target servers, and I've done the same with the SQL Server service account (it uses a domain account).  I have configured the Distributed Transaction Coordinator on the source (Win2003) system per Microsoft KB 839279 (this fixed problems with remote queries coming the other way from the SQL2000 system), and I've upgraded the system stored procedures on the target (SQL2000) system according to MS KB 906954.  I also tried making the schema user a member of the sysadmin role, but naturally that was disastrous, resulting in an instant R/3 crash (don't try this in production!), so I set it back the way it was (default).
    What's really strange is no matter how I try this from outside the R/3 system, it works perfectly, but from within R/3 it does not.  A search of SAP Notes, SDN forums, SAPFANS, Microsoft's KnowledgeBase, and MSDN Forums has not yielded quite the same problem (although that did lead me to learning about the "trustworthy" database property).
    Any insight someone could offer on this thorny problem would be most appreciated.
    Best regards,
    Matt

    Good news! We have got it to work. However, we did it in something of
    a backwards way, and I'm sure you'll laugh when you see how it was done. Also, the solution depends upon the fact that the remote server is still using SQL Server 2000, and so doesn't have quite so many restrictions placed upon it for distributed transactions and Linked Servers as SQL Server 2005 now does.
    At the heart of the solution is the fact that the Linked Server coming FROM the remote server TO our SAP system works fine. Finally, coupled with the knowledge that using DBCON on the SAP side to the remote server also does actually provide a connection (see Notes 323151 and 738371), we set up a roundabout way of achieving our goal. In essence, from ABAP, we set up the DBCON connection to the remote server, at which point all the Native SQL commands execute in the context of the remote server. From within that connection, we
    reference the tables in SAP via the Linked Server defined on the remote
    server, as if SAP were the remote server, selecting data from SAP and inserting it into the remote (but apparently local to this connection) tables.
    So, to spell it out, we define a Linked Server on the remote server pointing back to the SAP server as SAPSERV, with a SQL login mapping defined on the remote system pointing back to a SQL login in the SAP database. We also define a connection to the remote server from SAP using DBCON, using that remote SQL login for authentication.
    Then, in our ABAP code, we simply do something along the lines of
    exec sql.
       set connection 'REMOTE'
    endexec.
    exec sql.
       connect to 'REMOTE'
    endexec.
    exec sql.
       insert into REMOTE_TABLE
          select * from SAPSERV.SID.sid.SAP_TABLE
    endexec.
    exec sql.
       commit
    endexec.
    exec sql.
       disconnect 'REMOTE'
    endexec.
    This is, of course, a test program, but it demonstrated that it worked,
    and we were able to see that entries were appropriately deleted and inserted in the remote server's table. The actual program for use is a little more complex, in that there are about four different operations at different times, and we had to resolve the fact that the temp table SAP_TABLE was being held in a lock by our program, resulting in a deadly embrace, but our developer was able to work that out, and all is now well.
    I don't know if this solution will have applicability to any other customers, but it works for us, for now.
    SAPSERV, REMOTE, REMOTE_TABLE, and SAP_TABLE are, of course, placeholder names, not the actual server or table names, so as not to confuse anyone.
    Best regards,
    Matt

  • Current database status does not match sitemap page

    After I had to drop and recreate an 10g instance the OEM Home tab displays Status Pending. The instance, however, is available and all other OEM functions like Performance, Installation, and Maintenance work fine.
    If I try to shutdown the instance the I get this message in the Startup/Shutdown:Confirmation screen :
    Current Status open
    This is the correct current database status, although it doesn't match the current status in the sitemap page.
    Stopping and starting the instance through OEM did not change this condition.
    How do you get OEM to update the status to what it knows it correct instead of what is stored in the sitemap page?

    Ok, I did that many times already. The command is 'emctl stop dbconsole' and 'enctl start dbconcole'. OEM still thinks the instance is Pending.
    Becasue of this and other problems with this instance I am going to cut my losses and uninstall 10.1 then reinstall 10.2 this weekend.
    For example, I am now getting messages like this on Startup and the database will not Open:
    ORA-04030: out of process memory when trying to allocate 41987820 bytes (pga
    heap,KCL disk IO request block array)
    If I allocate much LESS memory to SGA and PGA and then Startup the instance comes right up.
    Thanks for you help.

  • Your current security settings do not allow this file....

    Trying to download the latest version of iTunes and get the message "Your current security settings do not allow this file to be downloaded." I have made no changes at all, previous to attempting to download this update and have never had a download problem previous to this. I turned off my antivirus and set my browser security to its' lowest security level; still get the same message.

    Uh...that would be a tad difficult. I'm not supposed to have it. No one is...yet. I keep in touch with a friend I worked with as a PC tech about 10 years ago at a Best Buy (while in college.) He does Beta testing, sends me odds and ends (that typically wreck my system) and this one halfway works (actually less than half the features.) But, I've escaped bad software in the past using it. Sometimes, however, it prevents good software from loading as well. That's why I have asked if anyone else reported this kind of thing.
    The name, if you can find it, is 'Illegal Opcodes Anti-Trash.' Illegal Opcode is a screen name, by the way. And, it was written using Visual Basic. That's about all I can give you; that's pretty much all I know.
    If anyone else can verify something similar to this, let me know. I could uninstall it (Anti-Trash) and try again, but I just read other peoples problems and I'm a little leary to say the least. My current version of iTunes still works fine, so why risk it.
    Thanks for the feedback,
    Bradley

  • Current Number Status in Number Range

    Hi All
    Plz tell me the table in which status of Current Number is stored. That always increment in the Number ranges while running related Tcode.
    Like i am running a BDC program and for that transaction at the run time i want to compare some number with current Number Status of the Number Range.
    How will i do? Thanks in advance.
    Regards
    Ravi Arora

    Hi Ravi,
    There are a lot of FM's ( NUMBERRANGE* ) from se37 which can be used to get the information you need.
    Check them you might not need to code to get the current number, The FM will do for you.
    Regards
    VJ

  • Why doese this message appear"Your current security settings don't allow this file to be downloaded"

    no one helped me in this post, why Adobe Company doesn't have an answer to my question?
    please, i need your help
    "Dear Helpers,
    We used to use adobe reader 6 in our foundation to view pdf files on the internet, and since we had upgraded to the new version of adobe (to adobe 7 and X) the browser (IE 8) couldn't open any pdf file, and always returning this message: "Your current security settings do not allow this file to be downloaded".
    we have a group policy that doesn't allow the users to download files from the internet, but when we were using adobe reader 6, this message have not occurred while opening pdf file online, and everything was fine,"
    Please help me in this issue
    Thanks in advance
    Kind regards

    Hi eleanora27327971,
    I don't think there's a problem with the PDF file that you converted--that sounds more like a browser setting. What browser are you using? Are you able to download files from other websites? Or, are you able to log in to https://cloud.acrobat.com using a different web browser, and download from that browser? (See System requirements | Acrobat.com for a list of supported web browsers.)
    Tell me a bit more about your setup (what operating system, browser and version), and I should be able to point you in the right direction.
    Best,
    Sara

  • Cannot find a token authenticator for the 'System.IdentityModel.Tokens.X509SecurityToken' token type. Tokens of that type cannot be accepted according to current security settings.

    i am using a custom binding in the BTS Adapter with the following elements (similar to TransportWithMessageCredential with both the client and the server certs)
     encoding (soap11)
     https transport
    Security : CertificateOverTransport
    Problem: the request is sent successfully, but when i receive the response in BizTalk i get the following error
    System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party. ,after turning on tracing in the WCF Trace the following error is present "Tokens of that type
    cannot be accepted according to current security settings. "
    Solutions tried
    1) Changed the security to MutualCertificate , this time request also fails with the following error message  The remote endpoint did not provide a domain name system (DNS) claim and therefore did not satisfied DNS identity 'xxxx.com'.
    This may be caused by lack of DNS or CN name in the remote endpoint X.509 certificate's distinguished name.
    Binding configuration
     <behaviors>
          <endpointBehaviors>
            <behavior name="EndpointBehavior">
              <clientCredentials>
                <clientCertificate findValue="XXXXXXXXXXXXXXX" x509FindType="FindByThumbprint" />
                <serviceCertificate>
                  <defaultCertificate findValue="XXXXXXXXXXXX" storeName="TrustedPeople" x509FindType="FindByThumbprint" />
                  <authentication certificateValidationMode="None" revocationMode="NoCheck" />
                </serviceCertificate>
              </clientCredentials>
            </behavior>
          </endpointBehaviors>
          <serviceBehaviors>
            <behavior name="ServiceBehavior" />
          </serviceBehaviors>
        </behaviors>
        <bindings>
          <customBinding>
            <clear />
            <binding name="XXXXXXXXX">
              <textMessageEncoding messageVersion="Soap11" />
              <security allowSerializedSigningTokenOnReply="true" authenticationMode="CertificateOverTransport" requireDerivedKeys="false" securityHeaderLayout="Lax" messageSecurityVersion="WSSecurity10WSTrust13WSSecureConversation13WSSecurityPolicy12BasicSecurityProfile10"
    requireSecurityContextCancellation="false">
                <secureConversationBootstrap />
              </security>
              <httpsTransport />
            </binding>
          </customBinding>
        </bindings>
    Thanks -Madhu

    Please refer to the similar discussion:
    http://social.msdn.microsoft.com/Forums/en-US/6a3d38ee-30ca-43fb-b906-6e95808df69d/cannot-find-a-token-authenticator-for-the-systemidentitymodeltokensx509securitytoken-token?forum=wcf

  • When I try to use ExportPDF, a box shows up that reads "retrieving current session status"

    When I try to use ExportPDF, a box shows up that reads "retrieving current session status" and I am unable to continue.

    Hi Kyle,
    Could you try:
      Choose Edit > Preferences (Win) or Adobe Reader > Preferences (Mac)
      Click 'Online Services' on the left-hand side
      Sign out of our Adobe ID and sign back in.
      Try to convert your document again.
    Let us know how it goes.
    -David

Maybe you are looking for