Current Stock Balance

Hi Experts,
I have an issue regarding Closing Stock Which is normally followed in Indian Accounting System . This Closing Account is Sum of Raw Materials, Finished Goods, Work In Progress. But unfortunately B1 does not maintain two different accounts for Raw Materials and Finished Goods . Same Inventory Account is followed and effected for both of them . Our need is to track two different G/L Accounts , One for Finished Goods and one For Finished Goods . All the Transactions such as GRPO, A/P Invoice should effect Raw Materials Account and Transactions such as receipt from production and Sales transactions should effect Finished Goods A/C . seperately. Currently in both the cases same Account i.e Inventory account is only effected .
Moreover We need to have Closing Stock Balance (Raw Materials + WIP+Finished Goods) at Income Side of Profit and Loss Report .
Plz provide me some suggestions and guidance for how to resolve this issue.
Thanks in Advance.

Hai!
Having seprate Acc's for Raw Matrial and FG is Possible in SAP B1. This depends on the Valuation Method you follow.
Please tell me this,
1. Are you using Indian Standard COA or User-Defined?
2. what is your current Valuation method for all items ?
3. How do u differentiate your Raw Material and FG items ?
4. will u purchase a FG Item ?
5. Do u sell a Raw Material ?
jaiho!
Edited by: Thanga Raj K on Jul 20, 2009 11:08 AM

Similar Messages

  • Stock Balance Report

    Hi
    I have to create one stock balance report as on specific date,  I have checked MB52 it will show the current stock balance.  How to findout which are the stock types needed to check?
    Regards
    Sebastian John

    hi friend
    check the link
    [http://wiki.sdn.sap.com/wiki/dosearchsite.action]
    and give 'Stocks ' in the search field
    regards
    surender
    Edited by: SURENDER on Oct 14, 2009 12:10 PM

  • Report for Project Stock Balances as on a previous Date

    Hi PS Gurus !!
    We need to have a Report that gives the Project Stock Balances and Values as on a Past Date. The system gives a Current Status Report, but is there a Report that gives the Values for Past Date. This is a report for the Auditor's Interest.
    Secondly, we would also need a Report on the Movement of Project Stock in the past periods. Is this possible ??
    Thanx !!
    Ravi

    Hi Everyone !!
    I would once again request all of you to kindly answer to my question, as I need a solution to this urgently.
    Thanx & Regards,
    Ravi Kumar

  • How to loading the opening stock balance into Infocube 0IC_C03

    Dear Expers,
    I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
    Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    (1)original text:
    Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
    0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
    (see screenshot).
    Question:
    How to find option that upload mode u201CCreate opening balanceu201D?
    i'm  use to customize infopackage.  i  can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
    (2) I actived BI Contnet (0IC_C03), I seen that the data flow  as following:
    Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
    Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
    Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
    Quesiton: I donu2019t  know whatu2019s version, neither like BW 7.X nor like BW 3.X,
    Why have infosource in BW 7.X, how to use infosource load data to target?
    Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
    Do  I  need to create a  customize ODS?
    Thank you very much , if you will answer me above two questions.
    Best Regards
    Steve

    >
    stevezhuang wrote:
    > Dear Expers,
    >
    > I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
    >
    > Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    >
    > (1)original text:
    > Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
    > 0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
    > (see screenshot).
    >
    > Question:
    > How to find option that upload mode u201CCreate opening balanceu201D?
    >  i'm  use to customize infopackage.  i  can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
    >
    >
    >
    > (2) I actived BI Contnet (0IC_C03), I seen that the data flow  as following:
    > Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
    >
    > Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
    >
    > Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
    >
    > Quesiton: I donu2019t  know whatu2019s version, neither like BW 7.X nor like BW 3.X,
    > Why have infosource in BW 7.X, how to use infosource load data to target?
    > Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
    > Do  I  need to create a  customize ODS?
    >
    >
    > Thank you very much , if you will answer me above two questions.
    >
    >
    > Best Regards
    > Steve
    You don't need to worry about 0DF_C07 as it was defence cube not activated during your Business Content Activaiton.
    YOu can create your own infopackage for 2LIS_03_BX and there will be option generate intial status.
    This loading will create your Opening Balance.
    you need to compress this with NO Marker UPDATE option unchecked(as you will have to update hte marker).
    After this load movements 2LIS_03_BF and reval 2LIS_03_UM. Compress this with NO MARKER UPDATE option checked.
    Regards,
    RK

  • Inventory - Historical load from BF to 0IC_C03 changes current stock qty

    Loaded 0IC_C03 from 2LIS_03_BX to create opening balance.
    Compressed with "Marker Update" (Unchecked). Ran a report to display opening stock (0TOTALSTOCK).
    Report matches perfectly with MMBE in source system.
    Next, I loaded historical movements from 2LIS_03_BF. Compressed without "Marker Update" (Checked).
    Ran the stock overview report. The stock balances are now changed. Historical movements
    should not change current stock positions.
    Steps leading upto this issue (ECC/BI 7.0):
    1. Loaded data from BX setup to PSA and then to cube using a DTP with the "Initial Non-cumm for Non-cumm" option. Compressed with "Marker Update".
    2. Init BF without "Data Transfer" to create my delta pointer and then loaded BF setup table data to the PSA using "Full Repair request". Created 1 request per year based on posting date year.
    3. Then pushed data from PSA to cube using "Delta" DTP. Compressed all historical requests WITHOUT "Marker Update" (checkbox ticked).
    Any suggestions ? I have some sort of a workaround for now - the BX records in the cube do not contain values for the Material Document Number (MBLNR). I can put a charateristic filter in the query to display only records that have a null value for Mat Doc Number. In that case the report seems to be correct as I am eliminating the records from BF.
    Regards,
    Ash

    HI,
    Are you trying to install something which does not have their corresponding Infoarea, Infoproviders etc..? This might be the reason for those errors.
    Also You should use Collect objects automatically.
    Regards,
    Rahul S

  • Create Query using data from 0IC_C03 to show stock balance

    Dear All,
    I have successfully setup 0IC_C03. I have loaded in the data in accordance with the documentation. I check the result and it seems the stock balance match with the data source.
    However, my question is how can I setup a formula in the query so I can look up stock balance based on the date I put in to run the query.
    For example, I loaded in the data on Oct 13, 2008. For material A,  I have a key figure called Quantity total stock which is the net of receipt and issue total stock is  10,000 LB as of Oct 13, 2008. 
    When I run the same query using the date as of Oct 31, 2005, the quantity total stock show  -10,000 LB.  The stock balance of material should be 0 LB on Oct 31, 2005.   I know I can't just simply create 2 key figures - one using the loading date (Oct 13, 2008)  and one using the input variable date to add up together since I will have trouble if I enter Oct 13, 2008 as the input variable day because it will zero out.
    Please advise. Thanks.

    Hi Brian,
    Thank you for your reply.  After I double check, the setting was wrong in the DTP of 2LIS_03_BX to feed the infocube 0IC_C03.  it wasn't set to initial Non-cumulative for non-cumlative value in the extraction mode. after I change that and re-ran the whole process, the current and past stock balances are correct.
    However. the problem happen again when I test delta update.  I loaded 2LIS_03_BF delta update first to 0IC_C03 and compress with no marker update was checked. after that, I loaded 2LIS_03_UM delta update and compress with no no marker update was checked.  For some reasons, the quantity total stock doesn't add up. it should be 9600 LB in total quantity stock but show 0 LB as of Oct 08. When I ran the query for Oct 06, the quantity total stock show -9600 LB.  do you know why? Thanks again.

  • Deleting all stock balances in IM and WM

    Looking for some ideas on the topic of deleting all stock balances in a plant in both IM and WM for a project that is occurring currently.
    We plan on using transaction MB1C with a 562 movement type, we have configured our WM movement type to create an immediate TO and confirm, search strategies are set up to *** however, when inventory is in multiple bins in the same storage location I get one TO then multiple TR's due to the splitting of inventory among bins which I don't want to get so some strategy is out of whack there.
    Second question is to anyone out there that knows of a better way than what I mentioned above. This is a pure purge as the plant(s) will be forever disabled and the data is non important in the system that is being purged.
    Thanks
    Stan

    The other options of depleting Inventory is either scrapping- 551 or GI to cost center 202. These would in turn accomplish the same result as 562- not much difference there.
    If your stock is stored in mulitple bins then you will have to contend with several transfer orders.

  • What is meant by opening stock balance?

    what is meant by opening stock balance and  how we load the opening stock balance .Actually i gone through the document in SDN.But i didn't understood properly.Can anybody explain in simple words.

    Hi Pardhu,
    In many cases your SAP R/3 system goes live earlier than your BW system.
    Say during go live in R/3 on 1st May 2009 - you had certain stock of product1 in inventory - say 100 PCS.
    You then sold 20PCS of product1 and brought 40PCS until today.
    So the stock of product1 in your inventory is 100 - 20 + 40 = 120.
    Now if your BW system was to Go Live tomorrow.
    You would have to let BW know what is your current stock level.
    From tomorrow then you can record only movements in BW.. ie you will send only data of sold and brought pcs of prodct1 from tomorrow.
    To inform BW about the current stock level you need the data source 2LIS_03_BX.
    To send the movements to BW you have the data source 2LIS_03_BF.
    2LIS_03_BX picks data from statistical table.
    For the statistical table to reflect the current stock of product one , you need to run MNCB ---> which precisely calculate the current stock level of product1 using the logic 100 - 20 + 40 ie stock till date and stores it in the statistical table.
    Then you load this data through 2LIS_03_BX to BW. Thus BW has the information of current stock.
    Then you load the movemens only through 2LIS_03_BF after setting up the delta.
    Markers can only be updaed when compression is done.
    You choose to update the marker based on certain conditions.
    BW uses markers to store the information of stock levels.
    It stores the stock as the marker value(reference value) +/- delta changes.
    When the cube is compressed you can update the marker. This will make the reference more current in time. Thus to calculate current stock you will have to take into account lesser deltas and a more current marker .. this improves performance...
    For further details on this :
    [How to handle inventory management scenarios|http://sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    Hope this helps,
    Best regards,
    Sunmit.

  • PGI - Stock balance

    Hi Gurus,
    I need the delivery completing and the stock balances clearing as there is NO physical stock. When I try to PGI it gives me an error-
    Deficit of BA unrestricted -use 30 EA
    When I go in MMBE and check the stock for the batch, it shows that 30 are reserved for the order.
    Can you please comment on what is happening and how to solve and do PGI to balance the stock.
    Thanks
    Bawa

    No there is no stock it is showing negative -30 in MB52. There was TO (picking) confirmed in june and now i got to PGI. I tried to change actual GI date to current date but didnt worked, still same error.
    Thanks
    Bawa
    Edited by: Bawa Bawa on Nov 11, 2008 2:21 PM

  • Opening and closing stock balances

    Hi
    What report can i use to show the opening and closing stock balances of materials for the last 12 months.
    Thanks
    Vinesh

    You can view the report in MMBE.
    other than this you can try
    MBEWH and MARDH
    Also follow the link:
    Re: op.& closing stock detail in MM
    Thanks
    Nisha

  • Report for Reorder point, safety stock, current stock and fixed lot size

    Hi,
    Purchasing Dept. is looking for a report which can give list of materials falling below the reorder point, so that they can go ahead and create procurement proposals for those materials.
    They also want to see the Reorder Point, Safety Stock, current stock and fixed lot size in the same report.
    Let me know if there ia any standard report availbale which displays the same or any approach to get the same.
    Thanks in Advance.
    Regards,
    Shankar Goud.

    Hi,
    There is no standard report because this is meant to be managed by the MRP run.
    The MRP lists show all materials that have a problem (such as stock below reorderpoint) but MRP generates requirements for these anyway and so all you need to do is to look for the MRP generated requirements (requisitions?) and you have your list?
    Are you using MRP?
    If so then please use the standard functions in MRP to get this.
    If not, then WHY NOT?
    Steve B

  • Inventory Report for current stock and Safety, Minimum etc stock levels

    Hi,
    Is there any report available to view the current stock against the minimum, safety stock levels so that the user can plan further actions accordingly.  Can anyone please guide me on this.
    Thanks in Advance.
    Regards,
    Laxmi

    Hi Shailesh,
    Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything.  Can you please help.
    Regards,
    Laxmi

  • Report on current stock and safety stock

    Hi,
    I want to have the report on current stock and safety stock.
    In MC.9 it gives wrong safety stock. When I go to cross check the safety stock in material master & in MC.9 I see differences.
    Thanks,
    Kiran

    You can user tcode MC.9 or MC.5 to know valuated stock available at given plant. Stock lying in Returns (MB52) will not be a part of this report as it non-valuated stock.
    The stock in the accounting view of the material master considers stock at plant level including stock in Transit (Intra & Inter plant stock trasnfers) & special stock like stock issued to vendor , consigment stock etc which is valuated at plant level.
    whereas and stock in the plant stock view of the material master does not consider such special stocks hence there will always difference in both veiws.
    For Physical stock as on particular date you can consider MB5B report with radio button "Storage location/Batch Stock" wherein you will get Quantity issued & Qunatity received in those SLOC along with Opening stock & Closing stock for the specified period.
    use tcode
    MBLB to know stock at vendor.
    MB54 - Consignment Stock.

  • Stock balances

    How can we get the stock reports in SAP
    Vaibhav

    Hi Vaibhav,
    Please try MB5L -Stock balance per GL or S_P00_07000139 - Stock card and IMAT Report
    Regards,
    Polla

  • Stock balances by location

    Hi I wonder if you can help. I have ran tcode MB5L which provides me with a list of all stock by material code, providing quantity and value. In order to find out which storage location, I can double click on the items, and it shows the storage location, which is via tcode MMBE. However MMBE is for stock balances by location for individual material codes only. Is there one I can run for all stock balances by storage location?

    Perfect - many thanks for the quick response. Points have been awarded.

Maybe you are looking for

  • Error while processing payment through F110

    Hello I am getting the following error while processing payment through F110 > Payment method selection for items due now to the amount of EUR          287.32- > Payment method "Q" is being checked > Bank details are being checked >     Customer/vend

  • Adding a Lightroom action to Export Actions folder

    Despite endless monitor calibration with Spyder, my prints from Mpix come out much darker than they appear on my Intel iMac monitor (running OSX 10.5.5). I have tried using Shades to darken my monitor, but I don't like my screen looking that dark all

  • Field value in header

    I am stumped. Need to print out a student report that has header info of student_id, name.. but as you know the header won't let me insert field there. How do you handle this ? I use word to create the rtf. Can you help ? BIP:10.1.3 Thanks. Munshar

  • Web Sharing not an available option in preference sharing

    I bought a Max Mini with OS X 10.6.4 server already installed. I dont have web sharing as an option to check when I go to system preferences>sharing. Is this an option that I need to install myself? I thought web sharing was installed by default? Any

  • Trouble with GridRow expanding

    Hello all: I'm fairly new to Flex development, hope this question is not too obvious. I'm trying to create a Grid with rows and components that get larger as a user a resizes the window. I'm using constraint-based layout, and it seems to work fine ti