Current System Date is not an open or authorised accounting period

Hi
Has anyone come across this system error message when running a Manual Internal Recon for a Supplier from Business Partners Module:
"Current System Date is not an open or authorised accounting period"
I couldn't find a post on it in the forum.
The scenario:
December 2010 Posting Period is Unlocked
November 2010 & January 2011 Posting Period are Locked
Suppliers transactions to be reconciled average between August 2010 to December 2010, the Suppliers Currency is USD, the Recon Date is 25/01/2011 (todays date), the database LC = ZAR, SC = ZAR therefore making the USD = FC, Recon total = zero (after ticking relevant postings) > Reconcile > Gives above error message
I tested x3 scenarios:
- Change Recon Date to 31/12/2010 (as December 2010 period is Unlocked) = Recon reconciles
- Open the January 2011 Posting Period = Recon Reconciles
- Reconcile any Local supplier = LC (ZAR) Supplier with the same Recon Date (25/01/2011) = Recon Reconciles
With the above mentioned it looks like something to do with Exchange Rates based off Recon Date trying to pull from January 2011 but can't because Jan 2011 Posting Period is Locked.
Any ideas on the error message or why this may happen.
Regards
Kurt Walters

Hi Rakesh
Thanks very much for the reply, your answer has agreed to what I have said so I will consider this message closed now, thanks for the help much appreciated.
Gordon - I am aware of this as per my post, just wanted to check as LC can post fine with the Period being closed but the FC will not based on the Recon Date, as per Rakesh agreement due to the FC looking at the Recon Date as well as Exchange Rate for that recon date and Period not open it will gives an error message.
Thanks both for your replies, much appreciated.
Regards
Kurt Walters

Similar Messages

SCOM not generating alerts & The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager

Hi Anyone can assisting on this. The SCOM 2007r2 i managed suddenly do not pump out alerts.
I have perform full scom service restart(data access, agent, config). it no load up related datawarehouse like(stored, write)
I also restarted my sql db services. It show me the error like this. Anyhow i can fix it
The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager" requested
by the login. The login failed.
Login failed for user 'HK\svc-scomsdk'.
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at System.Data.SqlClient.SqlConnection.Open()
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at System.Data.SqlClient.SqlConnection.Open()
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".

Hi,
I would like to suggest you reset the SDK account password (in this case, it seems like that the account is 'scomsdk'). And change the password for the account in service configuration.
Please go through the below article for details:
How to change the credentials for the SDK Service and for the Config Service in Microsoft System Center Operations Manager
http://support.microsoft.com/kb/936220/en-us
Regards,
Yan Li
Regards, Yan Li

How to get current system date and store in db

may i know how to get the current system date so that i can store it into the database

java.util.Date is NOT deprecated, just most of its methods are.
Use
new java.sql.Date(System.currentTimeMillis());to get the current date. Note that the date in a client machine
may differ from the clock of the server!
BTW: java.sql.Date extends java.util.Date.
Fritz

Creating a field or workflow that responds to the Current System Date.

In our activities/tasks we have a field that is the Expected Completion Date or Required Completion Date. Based on that date, and the current date, I want a workflow to trigger when the required completion date is less than 30 days away, sending daily reminders to the owner/manager that they have a activity/task due.
The way I see it I have two options.
1. Customize a field to be the system date. Create a workflow that says every time that field changes, and the date is within 30 days of required completion date, send out an email.
2. Create a workflow that somehow incorporates the current/system date, and do the same thing as above, substituting the field with the actual date.
I don't know how to make either of those options happen. Does anyone either have other options or advice on how to make this work?
Thank you in advance!

Hello Cyril,
Here is an idea that could be done:
You could create a dynamic step by having a step that holds all the properties for both configurations (the superset of the necessary variables) and an extra one that indicates which 'mode' the step is in. Then you create the main Edit substep in whichever language you desire. That substep window will then have a box/dropdown/etc. at the top you can use to choose between modes A & B. When the user changes the value, you would dynamically change the rest of the window to contain the appropriate properties for mode A or B. You then copy the property values in that window to the Step properties, and copy the mode to your variable and you can run the step in that mode. When the step then runs, it checks the mode variable, and depending on its value, it will run the step in mode A or B.
Now we could add a dialog that allows us to choose when we put a step down but we should still allow the user to change later via the Edit substep we create.
I don't think we can create something that inserts a completely different step, but we can have one step that has the ability to do both and we can pick which one we execute. Also note we still don't have the ability to edit the Panels for a step, so we have to use a new window that we call from our Edit substep to complete the step.
Hope this helps.
Regards,
Olivier L. | Certified LabVIEW Developer

System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for user 'NT AUTHORITY\SYSTEM

Dear ALL
After successfully shifting the CRM from 2011 to 2013 i found a problem in Reporting section none of the report is working after some finding i conclude that MSCRM_FetchDataSource is not able to connect successfully
Through my report manager i tried to test the connection of MSCRM_FetchDataSource but i got the following error
System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for
user 'NT AUTHORITY\SYSTEM'.
I already add the NT Authority \ System as a db_owner under my database user of MSCRM_CONFIG
But still no success any one have any idea why it's happaning
Regards
RB

I found a solution I hope my post will help other
I gave the db_owner to 'NT AUTHORITY\SYSTEM' and 'NT AUTHORITY\NETWORK' and assigned with both CRM and Config database
It resolved my issue
RB

Urgent ! Exit code to calculate End Date (31/12/9999) to Current system Dat

Dear All,
I have a scenario where i need to calculate Position time hold by an employee in an organisation.
I have 2 date Char ( DATE FROM & DATE TO), the problem is that is , If an employee is having
2/3 position in an organisation its current position End Date is always 31.12.999 as its End date is
not know. For previous position End Date is maintained.
My requirement is to calculate Position hold time including Current position.
I have created 2 Formula Variable on Date From & Date To,
The issue is that Date To is having both Values Previous Position Date thats ok as its not 31/12/9999
I am geting those values in Forumla in addition its also having Date For Current position as 31/12/9999
which should be converdet in to current system date.
I need to write a User Exit on End Date Forumla Variable which should only convert if Date = 31/12/9999
else leave it as it.
For EX,
EndDate
1/1/2005
1/1/2006
31/12/9999(Only this value need to convert as current system date and leave above valuse as it)
Can any one please provide me the code for this, this is v urgent.
Thanks V V much.
Regards,

Hi Dilek,
I now understand what you were writing.
I played around a bit and it still doesn't work like I want to.
The really strange thing is when I adapt an existing (SAP - standard) dynamic action (for another IT) the 'calculation part' is performed and with my own attempt it doesn't substract the day.
0442              BEGDA     06     10     P     T001P-MOLGA='05'
0442              BEGDA     06     20     I     MOD,0014,1539
0442              BEGDA     06     30     W     P0014-ENDDA=P0442-BEGDA
0442              BEGDA     06     50     W     P0014-VTROP='-'
0442              BEGDA     06     55     W     P0014-VTRAN='1'
0442              BEGDA     06     60     W     P0014-VTRZH='010'
If IT0442 is created or changed, IT0014 with subtype/wagetype 1539 should be delimited with enddate = (startdate IT0442 -/- 1 day)
If you can have a look whether I mak e an obvious mistake, it's appreciated.
In the meantime I'll fiddle around as well at my end.....
Thanks,
Wilfred.

How to display current system Date in the Date Input field ?

Hi,
I am having a Date Input field( binded to Data type). On load, i would like to display the current system date filled in that input field.
How do i achieve this ?
Reg/Venkat

Hi Venkatesan,
In your view in your init() method add the following code:
wdContext.currentContextElement().setOrderDate(new Date(System.currentTimeMillis()));
this is if your Date-attribute is in the root of the context.
else you have to set the date in the node where the date-attribute is present with:
IYOURNODEElement node = wdContext.createYOURNODEElement();
node.setOrderDate(new Date(System.currentTimeMillis()));
regards,
Björn

I need to get the Current System Date and time in the format

I need to get the Current System Date and time in the format
*6/24/2009 11:30:29 AM*
How do i do it ?

I seem to be saying this a lot lately.
Google is your friend.
I googled "java current date format" and SimpleDateFormat featured prominently in the results.

Want to shedule a report in background with current system date

Dear All,
I want to schedule a report which is having date parameters in the selection screen.
What i want is that , every time in the schedulling period the report should run in current system date only with a variant.
Would it be possible.
Thanks in Advance.
With Regards
Shantanu

Yes possible by 2 ways.
I) This way you can use the current date dynamically
Go to your variants in change mode,
1. Check the box 'Selection Variable' for date.
2. Click on selection variables
3. Choose 'D' for dynamic date calc
4. Choose current date and save.
II)Default it in code
Default sy-datum for the selection variable.
Hope this helps.

Assign current system date to the existing variant of date field

Hi Experts,
I am working with BDC for data uploading. Here I have a different requirement that how to assign the current system date to the existing variant of the date field .
The date field is defined as: select-options s_date type sy-datum.
Anybody have an idea, pls let me know.
please help me .
appreciate your valuable suggestions.
Thanks.
Prasad.

Hi,
try like this...
SELECT-OPTIONS: s_date FOR sy-datum DEFAULT sy-datum.
Arunima

Current System date in report

Hi,
Iam working on BW reports. Currently iam with report which needs to get the current system date automatically in reports.
Can anybody help me on how to get the current system date in report automatically.
I tried in layout but it gives all info. But i need only current system date.
I even tried variable of type sapexit under 0calday. but as it is an variable it filters values with reg to current system date.

Hi Ucas,
U have to write the code for the variable as follows:
1) Go to transaction SMOD
2) Enter 'RSR00001' in Enhancement field. Also select the 'Components' radio button. And press 'Display'.
3) Double click on the function module 'EXIT_SAPLRRS0_001'
4) Then, double click on code text 'INCLUDE ZXRSRU01'
5) Now, u reach a screen, where u can write ur include program. U have to write, for example, 'INCLUDE my_code'. Then double click on this to include ur code inside.
6) The code can be :
CASE i_vnam.
    WHEN '<write ur variable name>'.
    CHECK i_step = 2.
    s_range-sign = 'I'.
    s_range-opt = 'EQ'.
    s_range-low = sy-datum.
    APPEND s_range TO e_t_range.
ENDCASE.
Assign points if u find the above info useful.
Message was edited by: Vishesh Pahariya

How to access current system date???

Hi Experts,
I am working on a process wherein a user creates a proposal and a notification is sent to the manager for approval.
Now i need to send the date of creation as a attribute to the manager.
Can anyone guide me as to how to get the current system date???
Thanks a lot.
Cheers
Gaurav Raghav

Hi Wojciech Matulewicz,
I have tried using this before and i faced this problem.
When i click on create proposal, the screen just refreshes and the CO execution doesnt ends.
Without ending this field, however things work fine.
here is the code:
Method technicalDescription()
IGPAttributeInfo date = output.addAttribute("DATE", IGPAttributeInfo.BASE_DATE);
date.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
Method execute()
Date currDate = new Date(System.currentTimeMillis());
contextElement.setDate(currDate);
Method complete()
output.setAttributeValue("Date", wdContext.currentContextElement().getDate());
If i comment out this code, the CO execution works out fine, but on addition of this code the screen refreshes and CO execution doesnt end.
Am i doing something wrong???
please help me out with this.
Thanks.
Cheers
Gaurav Raghav

Set current system date in a field on load of a page

Hi APEX users,
I read about a similar thread on the subject but I am just as confused.
Simply I need assistance with the following:
I have a page that has many fields and one of those fields is DATE_RESOLVED. This is a DATE Picker field but I want this field to show the current system date every time the form loads/reloads BUT yet give the user the ability to change the date if they should choose to do so by way of the DATE Picker calendar.
How would I achieve this?
Any help will be greatly appreciated. My form is functioning just fine but I just need to achieve this one last date function.
Thanks in anticipation for your assistancel.
Rick

Hi Ric,
the follwing should cover your requirements.
a)
On you main page screen, if you click on your particuar date item, say P1_MY_DATE
set the follwing:
#1 under Source,
Source Used: only when current value in session state is null
Source Type: Plsql expression or function
Source value or expression: sysdate
#2 under default
default value: sysdate
default value type: plsql expression
b)
On your main page screen, create a new page computation by clicking on the '+' icon next to computation on the left hand side (page rendering)
location- item on this page (default) -> next ->
compute item: select your item (P1_MY-DATE) -> computation point: Before regions ->computation type: plsql expression -> next ->
computation: sysdate -> next
(leave blank, unless you want this to be conditional) -> create
done...

XMP file "system.xmp" could not be opened for writing

hai
i am trying to download OpenSPARCT1 code on to the kit. i am working on linux platform .upto bit gereration it is o.k. but after that in the DV guide it is given like this "Right-click on the microblaze_0_boot loop application and select Mark to initialize BRAMs.,and when i am doing this it is showing the msg asXMP file "system.xmp" could not be opened for writing'.If anybody know the reason please send me.

Hi Rd,
Per SAP Note 1911880, this has been identified as a Bug in CR 2011. Since CR 2013 is just a rebranded version of the same tool, the SAP Note should apply to CR 2013 as well.
For CR 2013, the issue has been resolved in FP3. I would suggest you to upgrade to the highest available version for CR 2013 and see if it works.
Another workaround could be to right-click the CR Designer exe > Run as Administrator > Log-in with Admin credentials > try opening the report.
-Abhilash

Export Preset to Rename with Current system Date?

Hi All,
I'm trying to build some export presets with a naming convention to include the current system date, eg: YYYYMMM-Title-Custom Text. This convention is oftened required for photo club, local, national & international photo competitions. The only date function I can find is the 'capture date'. Is there a way to modify the Export Filename Template Editor to include 'current system date' ??
Edit:
Sorry forgot to add, LR5.3, Mas OS 10.9.1
Regards
Craig

You need to click the 'Define' button and choose Date/Time Now (Custom Metadata):
If you need more help, please contact me outside the forum - thanks.
Rob

Current System Date is not an open or authorised accounting period

Similar Messages

Maybe you are looking for