Current time for the X-axis in the wave chart

I understand that the "attribute node" function is edited to show the current year/month/day/hour/minute/sec in my waveform chart. However, the default year is 1904 and trying the "attribute node" still fails. Please anyone show me the step-by-step procedure to do it.
- An awl trying to learn L/V.

My L/V is Ver.5.0. Referencing your suggestion, on the panel I click X-scale -->, Formatting --> X- Scale Formatting. Then I arrive at "Scaling Factors". Here I see year "1904" and modification is impossible. I can not find any place to put value 7 as you suggested. Your suggestion to use ENUMS does not seem to be clear to impliment. Trying "Attribute Node" in the Diagram leads me to "X scale info", but further try does not make it. And I can not find "Offset and Multiplier" and "Get Date/Time" as you showed. Sorry to say that still I am not successful. This might be due to the version differences.
As a reference, I here attach the panel and diagram of my work.
Attachments:
jks.llb ‏252 KB

Similar Messages

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!

Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous

HT1349 my home button will not work properly... I have to hold it down several times for it to go to the home screen

my home button will not work properly... I have to hold it down several times for it to go to the home screen

I would try a restore just to see if it could be something software related, but if that doesn't work I would recommend taking to an Apple Store to see if it is a serious hardware issue and if it is, assuming you're in warranty, then they would be able to replace your phone.

Contacts - would like current time for every person.

I cannot find where to put this question, either here or on the feedback page. I would like a feature on Contacts which shows the current time for a contact.
I have contacts in many parts of the world. It would be nice to simply display the current time for each contact.

Feedback would be the place. We're just users here and can't do anything about the software.
I like the idea, though.

Access the X-axis value from Flash Chart

Hi,
Is there a way I can access the X-axis value from Flash Chart to populate a report in another page? My X-axis is not a direct column in the table it is computed in the query.
X-axis is MON-YEAR computed from the Begin_Date column. I want to capture the MON-YEAR clicked by the user to populate a report for that Mon-Year.
Here is my chart SQL.
select 'f?p=&APP_ID.:18:&SESSION.:::::::' link,
to_char( "VIEW"."BEGIN_DATE",'MON-YYYY') label,
sum(decode(TYPE_Id,2,Value,0)) "Value-1",
sum(decode(TYPE_Id,1,Value,0)) "Value-2"
from "VIEW" where to_char( "VIEW"."BEGIN_DATE",'MON-YYYY')= to_Char(sysdate-100, 'MON-YYYY')
group by to_char( "VIEW"."BEGIN_DATE",'MON-YYYY'),
to_char( "VIEW"."BEGIN_DATE",'YYYY')
order by to_char( "VIEW"."BEGIN_DATE",'YYYY')
Any suggestions?
Thanks

Thanks Marco..
I did the same thing. I found this info at Re: Charts and links
in the forum.
Thanks for the help again.
Nimmi

How to keep showing items created in current month for 5more days only in the next month by OOB functionality only

Hi,
I have a Time Reporting site where users log in their time twice a month.This site uses only Out Of Box functionality. There is no scope for coding in my site.
In the list i have created a view which shows the Time Report of the user logged in for the current month only.
There is a new requirement : Current month's Time Report should be visible to the users in the next month for 5 starting days of the month only so that users can edit this month's Time Report in the next month's 1st 5days incase they forget to edit it in
the current month.
e.g: If i am absent on the last day of the month , my time report for this month(March) should be visible for 5 days in April so that i can stiil edit March's time report. However after 5days the Time Report for March should not be visible. After 5days only
April's time report will be visible when submitted(April's time report).
Please can anybody help me out with this.
Regards ,
Guru

Hi Guru, you have a couple of options: 1) set a retention schedule through the list's settings> Information Management Policy Settings. Where the start date < start date + 35.
2) create a view and filter by the date like above.
These aren't perfect scenarios, but will get you close to what you want.
cameron rautmann

Saving to SharePoint works only half the time for Windows 7 Users--all the time for Windows XP users

We have a SharePoint 2010 Environment with hardware load balancing, 2 WFEs, 2 Apps Servers and 1 SQL Server. This was built in October 2013. Office Integration and Saving back to SharePoint works all of the time for users on XP. It works sporadically for
users on Windows 7. When Windows 7 users do the following:
Opening an Office Document from computer and saving it to SharePoint
Within a Document Library, using Save As from an opened document
When selecting in a Document Library from the Document Tab> “New” and then the desired content type
Send> Save to SharePoint from within Office Document
They may either be brought to the SharePoint library (correct) or to My Documents (incorrect).
In the case of number 1 (Opening an Office Document from computer and saving it to SharePoint)--using Save and Send will sometimes open the SharePoint library and sometimes open My Documents.
Our URL is https://CompanyName.domainname.com/Sites/SiteCollectionName
The intermediary "Sites" is actually a blank path.
When My Documents is opened I've noted with Fiddler (a web debugger) that we get a 404 on sites:
Could this be the issue?

Some things to double check:
Ensure that you have sticky sessions enabled on your load balancer
Check that your WebDav calls are making it to the server
Ensure that you have a root site collection in all your web apps
Just out of curiosity, what is the http request look like for the 404 error?
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Is there a way to show the current URL for a WebHelp topic in the browser?

RoboHelp 11, WebHelp.
When I open the WebHelp project, the URL displays the start page for the Touchstone Help project: ..../Documentation/Touchstone/Content/Content.htm.
As I go to different pages in the Help, the URL never changes.
Our client consulting personnel often like to copy a URL to send to a client who has a question about a particular topic.
Is there a WebHelp setting that supports display of the current URL?
Thank you.
Carol Levine
AIR Worldwide

Hi, Jeff.
Internet Explorer 9.
I've got the pointer in the topic.
Right-clicking displays the following shortcut menu.
When I click "Create shortcut" (the only option with "shortcut" in the name), the following message appears.
After clicking Yes, the shortcut is on the desktop. The user must then right-click the URL, select Properties, copy the URL from the Web Document tab, paste it into an email, and send it.
Is this the process as you understand it?
Thanks.
Carol

My new password isn't working for in stalling elements 12. I just changed it several minutes ago. Will it take some time for it to feet in the system?

I've got Elements 12 downloaded and now I'm trying to install it, but my new password isn't being accepted. I just changed it a bit ago. What should I do? Does it need more time to get in the system, so to speak?

Hi,
The only password is the one for you Adobe Id which I presume you are using to ask this question. If you can log on to the forum, it should work during the install.
What error message do you see?
Brian

Label printing (repeat X times for certain label depends on the input file)

I want to print the label.. and source file is something like..
Item Name No.of Copies to be printed
Item 1 5
Item 2 3
Item 3 2
when it convert to the dat file.. i think maybe is something like
^field ItemName
Item 1
^field NoCopy
5
^field ItemName
Item 2
^field NoCopy
3
^field ItemName
Item 3
^field NoCopy
2
Is there anyway for me to detect the NoCopy and then print the label according to the NoCopy??
In this example, i want to print 5 sheets for Item 1, 3 sheets for Item 2, and 2 sheets for Item 3.
Hope to hear from you guys asap!!
Thank you!
Thank you!!

On the subject of printing labels I would have to admit that I never really had much luck with my label printer. I spent all my time messing around with the printer and it still never printed any decent looking labels. In the end I decided to give up on the whole DIY approach and I found a british labels company to do my
label printing for me, they saved me so much hassle.

Get est time for sql without running against the db ??? possible ?

hello,
is there anyways to get a query execution time without running that against the database ?? even an estimate would be good...i am on 10.2.0.3 ......i am it might be impossible for it...but anyways to get estimate besides setting autotrace only ?? as i said want nothing but just like a estimate time for how long will it take to finish the query...i know we can very long_ops view but as i said..without running against the DB ...is that possible ?? as the explain plan i get shows time ?? but is that how long it will take to finish up or ?/
select * from table(dbms_xplan.display);
| Id | Operation            | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |      |    56 | 3192 |     9   (0)| 00:00:01 |
|   1 | MERGE JOIN CARTESIAN|      |    56 | 3192 |     9   (0)| 00:00:01 |
|   2 |   TABLE ACCESS FULL | DEPT |     4 |    80 |     3   (0)| 00:00:01 |
|   3 |   BUFFER SORT        |      |    14 |   518 |     6   (0)| 00:00:01 |
|   4 |    TABLE ACCESS FULL | EMP |    14 |   518 |     2   (0)| 00:00:01 |
-----------------------------------------------------------------------------

user11168115 wrote:
hello,
is there anyways to get a query execution time without running that against the database ?? <snip>
How long is a string?
How deep is a hole?
How long does it take to read an unknown number of blocks containing an unknown number of rows from an unknown disk system with an unknown contention load, pulling it across an network of unknown bandwidth and unknown load ....
And I'm not saying that if you somehow provide all this that the answer can be known. I'm saying the too much of the information tht would be needed to make such an estimate is unknowable. Much of it will be widely variable from one execution of the query to the next execution of the exact same query. Which leaves you with exactly what to base your estimate on?
Without even seeing your query, I can tell you with absolute certainty that it will take between 1 nano-second and 100 years to execute.

HT1212 Every time i try to turn on my Ipad the only i can see the the date and time for a second and them the screem goes off again !

I have an Ipad 2 /. Everytime a push the bottom to turn it in the screem shows the time for a second and the screem goes black again
what can I do ??

Are you sure it's charged?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Time for a new Mac - Whats the BEST for Aperture?

Its time for me to upgrade my box and while I have money to spend I don't want to break the bank. This computer is just for Aperture!!! Which is the best graphic card(s), do I need 16 gigs of memory, is two quads worth the money? If I put RAID in can I get by with just 2 hard drives or do I need 4 for speed? If I buy the best and most of everything the box and displays comes to $14,000. Do I have to spend that much? $8000 is more realistic. What do you suggest?
TIA
Chris

Best is to wait until after Mac Expo SF in 2 weeks, then decide which Mac Pro is best. Aperture demands heavy hardware so the highest end MP will be "best" but some middle range model or even an older model may be most cost effective while still very good. Wait.
Today 2 drives in a RAID 0 array probably saturates a MP as far as throughput is concerned, but we need to wait and see what new MPs, cards, etc. are before configuring an optimum Aperture box. Doing exactly that homework is much of what I will be doing at Mac Expo.
-Allen Wicks

Use of current time for polling Database Adapter query

I am writing a simple BPEL process with a Polling Database Adapter and a Recieve. The idea is that we are polling an XE database for any entries in a TRIP table which have an expiration date/time field that has passed.
The Adapter was build using JDeveloper 10.1.3.2 (with Oracle Application Server patched to 10.1.3.3.0) as a "Poll for New Changed Records in a Table" Operation type with a STATUS field (0 for live, 1 for expired) as the Logical Delete Field.
I was unable to find a way to generate a SELECT query expression with the wizard that would allow me to use current/system time as an attribute, so I finished the wizard and edited the Toplink Descriptor to use a custom SQL expression for the query. This resulted in the following code in the toplink_mappings.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<toplink:object-persistence version="Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)"
xmlns:opm="http://xmlns.oracle.com/ias/xsds/opm" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:toplink="http://xmlns.oracle.com/ias/xsds/toplink"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<opm:name>ExpiredTripPoller</opm:name>
<opm:class-mapping-descriptors>
<opm:class-mapping-descriptor xsi:type="toplink:relational-class-mapping-descriptor">
<opm:class>ExpiredTripPoller.Trip</opm:class>
<opm:alias>Trip</opm:alias>
<opm:primary-key>
<opm:field table="TRIP" name="ID" xsi:type="opm:column"/>
</opm:primary-key>
<opm:events xsi:type="toplink:event-policy"/>
<opm:querying xsi:type="toplink:query-policy">
<opm:queries>
<opm:query name="ExpiredTripPoller" xsi:type="toplink:read-all-query">
<toplink:timeout>0</toplink:timeout>
<toplink:call xsi:type="toplink:sql-call">
<toplink:sql>SELECT ID, LPN, START_TIME, EXPIRY_TIME, STATUS FROM TRIP WHERE ((STATUS = '0') AND (EXPIRY_TIME < SYSDATE)) ORDER BY EXPIRY_TIME ASC</toplink:sql>
</toplink:call>
<toplink:reference-class>ExpiredTripPoller.Trip</toplink:reference-class>
<toplink:cache-usage>primary-key</toplink:cache-usage>
<toplink:lock-mode>none</toplink:lock-mode>
<toplink:container xsi:type="toplink:list-container-policy">
<toplink:collection-type>java.util.Vector</toplink:collection-type>
</toplink:container>
</opm:query>
<opm:query name="findAllTrip" xsi:type="toplink:read-all-query">
<toplink:timeout>0</toplink:timeout>
<toplink:reference-class>ExpiredTripPoller.Trip</toplink:reference-class>
<toplink:cache-usage>primary-key</toplink:cache-usage>
<toplink:lock-mode>none</toplink:lock-mode>
<toplink:container xsi:type="toplink:list-container-policy">
<toplink:collection-type>java.util.Vector</toplink:collection-type>
</toplink:container>
</opm:query>
</opm:queries>
<toplink:does-exist-query xsi:type="toplink:does-exist-query">
<toplink:existence-check>check-database</toplink:existence-check>
</toplink:does-exist-query>
<toplink:read-all-query xsi:type="toplink:read-all-query">
<toplink:reference-class>ExpiredTripPoller.Trip</toplink:reference-class>
<toplink:container xsi:type="toplink:list-container-policy">
<toplink:collection-type>java.util.Vector</toplink:collection-type>
</toplink:container>
</toplink:read-all-query>
</opm:querying>
<opm:attribute-mappings>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>id</opm:attribute-name>
<opm:field table="TRIP" name="ID" xsi:type="opm:column"/>
<opm:attribute-classification>java.math.BigDecimal</opm:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>lpn</opm:attribute-name>
<opm:field table="TRIP" name="LPN" xsi:type="opm:column"/>
<opm:attribute-classification>java.lang.String</opm:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>startTime</opm:attribute-name>
<opm:field table="TRIP" name="START_TIME" xsi:type="opm:column"/>
<opm:attribute-classification>java.sql.Timestamp</opm:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>expiryTime</opm:attribute-name>
<opm:field table="TRIP" name="EXPIRY_TIME" xsi:type="opm:column"/>
<opm:attribute-classification>java.sql.Timestamp</opm:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>status</opm:attribute-name>
<opm:field table="TRIP" name="STATUS" xsi:type="opm:column"/>
<opm:attribute-classification>java.math.BigDecimal</opm:attribute-classification>
</opm:attribute-mapping>
</opm:attribute-mappings>
<toplink:descriptor-type>independent</toplink:descriptor-type>
<toplink:caching>
<toplink:cache-type>weak-reference</toplink:cache-type>
<toplink:always-refresh>true</toplink:always-refresh>
</toplink:caching>
<toplink:remote-caching>
<toplink:cache-type>weak-reference</toplink:cache-type>
</toplink:remote-caching>
<toplink:instantiation/>
<toplink:copying xsi:type="toplink:instantiation-copy-policy"/>
<toplink:change-policy xsi:type="toplink:deferred-detection-change-policy"/>
<toplink:tables>
<toplink:table name="TRIP"/>
</toplink:tables>
</opm:class-mapping-descriptor>
</opm:class-mapping-descriptors>
</toplink:object-persistence>
To test I used the above custom SQL at the command line and it filtered the records by EXPIRY_TIME as expected.
When deployed, the polling process updates the STATUS file dof table entries, but all entries with status 0 regardless of EXPIRY_DATE. My modification appears to be being ignored. I was unsure as to whether the QUERY was being determined in some other way so I modified the descriptor (with the toplink expression editor) to compare against a literal time value, producing the following modified toplink_mappings.xml:
<?xml version="1.0" encoding="UTF-8"?>
<toplink:object-persistence version="Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)"
xmlns:opm="http://xmlns.oracle.com/ias/xsds/opm" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:toplink="http://xmlns.oracle.com/ias/xsds/toplink"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<opm:name>ExpiredTripPoller</opm:name>
<opm:class-mapping-descriptors>
<opm:class-mapping-descriptor xsi:type="toplink:relational-class-mapping-descriptor">
<opm:class>ExpiredTripPoller.Trip</opm:class>
<opm:alias>Trip</opm:alias>
<opm:primary-key>
<opm:field table="TRIP" name="ID" xsi:type="opm:column"/>
</opm:primary-key>
<opm:events xsi:type="toplink:event-policy"/>
<opm:querying xsi:type="toplink:query-policy">
<opm:queries>
<opm:query name="ExpiredTripPoller" xsi:type="toplink:read-all-query">
<opm:criteria operator="lessThan" xsi:type="toplink:relation-expression">
<toplink:left name="expiryTime" xsi:type="toplink:query-key-expression">
<toplink:base xsi:type="toplink:base-expression"/>
</toplink:left>
<toplink:right xsi:type="toplink:constant-expression">
<toplink:value xsi:type="xsd:date">2007-07-30</toplink:value>
</toplink:right>
</opm:criteria>
<toplink:timeout>0</toplink:timeout>
<toplink:reference-class>ExpiredTripPoller.Trip</toplink:reference-class>
<toplink:cache-usage>primary-key</toplink:cache-usage>
<toplink:lock-mode>none</toplink:lock-mode>
<toplink:container xsi:type="toplink:list-container-policy">
<toplink:collection-type>java.util.Vector</toplink:collection-type>
</toplink:container>
</opm:query>
<opm:query name="findAllTrip" xsi:type="toplink:read-all-query">
<toplink:timeout>0</toplink:timeout>
<toplink:reference-class>ExpiredTripPoller.Trip</toplink:reference-class>
<toplink:cache-usage>primary-key</toplink:cache-usage>
<toplink:lock-mode>none</toplink:lock-mode>
<toplink:container xsi:type="toplink:list-container-policy">
<toplink:collection-type>java.util.Vector</toplink:collection-type>
</toplink:container>
</opm:query>
</opm:queries>
<toplink:does-exist-query xsi:type="toplink:does-exist-query">
<toplink:existence-check>check-database</toplink:existence-check>
</toplink:does-exist-query>
<toplink:read-all-query xsi:type="toplink:read-all-query">
<toplink:reference-class>ExpiredTripPoller.Trip</toplink:reference-class>
<toplink:container xsi:type="toplink:list-container-policy">
<toplink:collection-type>java.util.Vector</toplink:collection-type>
</toplink:container>
</toplink:read-all-query>
</opm:querying>
<opm:attribute-mappings>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>id</opm:attribute-name>
<opm:field table="TRIP" name="ID" xsi:type="opm:column"/>
<opm:attribute-classification>java.math.BigDecimal</opm:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>lpn</opm:attribute-name>
<opm:field table="TRIP" name="LPN" xsi:type="opm:column"/>
<opm:attribute-classification>java.lang.String</opm:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>startTime</opm:attribute-name>
<opm:field table="TRIP" name="START_TIME" xsi:type="opm:column"/>
<opm:attribute-classification>java.sql.Timestamp</opm:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>expiryTime</opm:attribute-name>
<opm:field table="TRIP" name="EXPIRY_TIME" xsi:type="opm:column"/>
<opm:attribute-classification>java.sql.Timestamp</opm:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>status</opm:attribute-name>
<opm:field table="TRIP" name="STATUS" xsi:type="opm:column"/>
<opm:attribute-classification>java.math.BigDecimal</opm:attribute-classification>
</opm:attribute-mapping>
</opm:attribute-mappings>
<toplink:descriptor-type>independent</toplink:descriptor-type>
<toplink:caching>
<toplink:cache-type>weak-reference</toplink:cache-type>
<toplink:always-refresh>true</toplink:always-refresh>
</toplink:caching>
<toplink:remote-caching>
<toplink:cache-type>weak-reference</toplink:cache-type>
</toplink:remote-caching>
<toplink:instantiation/>
<toplink:copying xsi:type="toplink:instantiation-copy-policy"/>
<toplink:change-policy xsi:type="toplink:deferred-detection-change-policy"/>
<toplink:tables>
<toplink:table name="TRIP"/>
</toplink:tables>
</opm:class-mapping-descriptor>
</opm:class-mapping-descriptors>
</toplink:object-persistence>
On deployment, this version of the BPEL process behaved as expected - only modifying the records with EXPIRY_TIME less thatn the literal time specified. (Also, I can't really pass in the time as a parameter as this is a polling model).
Can anyone shed any light on what is happening or suggest how I might go about polling in the desired way?
Cheers

Please take a look at this article which states SYSDATE is not supported in a
where clause.
http://www.oracle.com/technology/pub/articles/bpel_cookbook/qualcomm-bpel.html
Excerpt from the article:
Here are three important things you should do in implementing the above design:
Have the status of the record being processed stored in the database. The status includes the process state, next process attempt time, and processing attempt count.
Create an updatable view that exposes only records that are ready to be processed. A view is needed because the database adapter cannot handle a where clause that compares against SYSDATE.
Design logic that determines if a process instance that has faulted should be retried and when the retry should occur. This information will be updated in the database by use of a stored procedure. This can also be done with an update partner link and additional logic in BPEL.
mahalo,
a iii

How can I use a timestring saved from LV as a csv spreadsheet file as the x axis of a LV chart?

I'm saving the timestring portion of a timestamp as HH:MMS along with each set of data fields to a cvs spreadsheet file, i.e. each row of the file starts with the timestring followed by data in each remaining column. The first row contains data field headings. I can read this file back into LV with no problem and can remove the header row but cannot find a way to use that timestring as the x axis of a chart graph. I have no problem graphing the data in that format within Excel itself. Can anyone help?
Thanks,
DennisR

Check the timestamp indicator, it is trying to write your time-stamp to your time-zone, so you will need to change the time-stamp to universal time. For the time-stamp indicator it is easy enough you just need to edit the indicator to display universal time, however for a purely data sense it is a bit odd, I have never found a straight forward way to do it so I use the conversion between Time in Seconds and Date/Time to do it for me.
Attachments:
Time Extract.png ‏21 KB

JCA polling DB Adapter current time for MarkReadValue

Hi,
For future debugging I would like to use current time (in whatever format) for MarkReadValue in a logical delete polling DB Adapter.
I understand that complex expressions such as ${weblogic.Name}, ${IP}, ${instance} work with the system properties. Is there a complex expresion for getting current date and time (in whatever format)?
Thanks,
--cb

Hi Manish,
Can you copy paste your .jca file?
I think the problem is with the name 'pollingStrategy'. Verify if the property used in the .jca file is PollingStrategy (Use Capital 'P').
Regards,
Neeraj Sehgal

Current time for the X-axis in the wave chart

Similar Messages

Maybe you are looking for