Current Time of Load on Infocube available in query report

Hi Gurus,
I just want to ask if there are available method to include in the query report the most recent time and date of loading of infocube. The requirement is when extracting the bw report, it would show the last time of loading from the infoprovider, from the infocube.
Initial plan is to add a field but where exactly will be the source of the time and date of the infocube loading.
Your inputs are very much helpful.

Hi
if the endgoal is to have in the webi, it is even easier.
Just create your statitistics query in the query designer and insert it as a new query in the webi (in webi you can have more than 1 query) they run sequentially but in my cases just one 1 sec tops. So even no workbook needed.
for the statistics check : (I think i used MP 0TCT_MC01)http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0e5ca3b-95ce-2b10-4d94-864ab29a8b63?overridelayout=t…
grtz
Koen

Similar Messages

Running query report times out

All,
At my customer we have a BW3.1 system.
When running a query using ta rsrt it times out after 1 hour. The query/report should be done in 5 minutes but somehow it gets stuck.
With an SQL trace we see no queries and in the Dialog work process we do not see any update on new records being read.
When its started it starts building/reading a temporary table: BI0/03010 but its get stuck and times out eventually.
We also ran the drop temp tables job and rerun the query, however this does not help.
Does anyone have any ideas where to look?
Grt,
Sjoerd

Run ti through RSRT in debug mode and display the SQL run schedule - then go and look at the query execution path
If your cube is partioned try and make sure you get the partioning object into the where clause (ie 0fiscper or 0calmonth) - if you cant get it on a selection screen - try and derive it in a cmod in a filter
Next - check that the database stats are current for the entries in the query
Go to the query exection path and click on the tables - they will give you the last statistics date
Updating the db stats can have a dramatic effect on the order you see in the query execution path
The temp table is probably a hierarchy build - these are a nightmare for large hierarchies - but go with the other things first

Suppose I have two identical laptops loaded with my current time machine back up. I take one on a trip and update it with time machine but leave it. I come back w time machine HD and connect the home laptop, will it just update or start over from scratch?

Suppose I have two identical laptops loaded with my current time machine back up. I take one on a trip and update it with time machine but leave it behind. I come back with the time machine HD and connect it to the home laptop, will it just update or start over from scratch? is there a way to make it just update it?

You might have better luck using a clone.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Commonly Used Backup Methods

Data loaded in Infocube is not visible in the Reporting

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and select All Elementary Tests in the dropdown ->Transaction data , select the Consistency of the Time Dimension for an InfoCube and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh..

Run-time connection load balancing

Hello!
I'm using jdbc thin client (10g) and I'm trying to improve connection pool management. I would like to enable run-time connection load balancing. Is this option
available with Fast Connection failover?
Basically when a a client requests a connection from the connection cache by calling the getConnection method on the DataSource object, I want that the connection selected
is the connection that belongs to the best instance from the connection cache. The client receives the connection that would process the work request with the
best response time.
With run-time connection load balancing ebabled what's happen when new connection is requested? The same algorithm?
Other question:
Is it possible create a manually process to distribute new connections? Having the following connection string:
url="jdbc:oracle:thin:@
(DESCRIPTION=
(ADDRESS=(protocol=tcp)(host=192.168.12.17)(port=1521))
(ADDRESS=(protocol=tcp)(host=192.168.12.18)(port=1521))
(load_balance=on)
(connect_data=(service_name=EHR)))"
In a specific moment I want that new connections only will be created in a specific instance... How can I do this? P.e.
Connection POOL has 10 connections (5 in each instance). All sessions are active and a new session needs to be created. At this moment I want to decide wich instance
is the best to attend the request...
Thanks a lot
Best Regards

Hi, there are several questions here. So, let me try to answer some, and I could address more if you have further questions. I am also presuming you are using JDBC driver's
colocated Implicit connection cache.
1) Yes, you need to enable FCF on the pool to leverage RCLB. Note, there are
no specific knobs for RCLB on the client side, only the RAC / DB side which requires
LBA to be enabled (this is documented in the RAC clusterware admin guide)
2) When LBA is enabled on RAC/DB, RAC starts posting FaN events to the pool.
This enables the pool to pick the best connection to an instance with the best
service response time or throughput -- depending on how LBA was enabled.
3) When new connections are created, the pool relies on the DB listener to place/create
the connections on the appropriate RAC instance -- this depends on the LBA goal you
set, and is required to be set to "short"
4) The pool currently does not have the ability to create a conn to a named instance.
What's the requirement or use case for this? If we understand this better, perhaps
we could address this. How do "you" decide which is the best instance to connect?

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

0CSM_USER_TEXT taking much time to load

Its related to 0CSM_USER_TEXT which isn’t a Retail Datasource/Object so I’m to assume it’s a FI&Gen Job. The job currently produces 200,000 records over an 8 hour period. Firstly it used to finish in 8 sec for some number of records those were Not more than 10,000.
Please tell me solution why the loading is taking so much of time. Because of this whole Process Chain is taking time to load.

Hi,
Assuming as its taking more time while loading to psa.
if yes then please check your job log at source side.
Go to your info pack monitor--> menu environment--> job overview--> job in the source system--> it will prompts for source user id and password. enter them and you will egt your job.select job and lick on log details icon from tool bar. there you can see your job in detailed steps.
Thanks

Takes a very long time to load pages and is laggy

The new''' FF (4) '''was good at first, but recently it is starting to lack the goodness it once had.
'''It is becoming slower and slower by the day and takes a very long time to load pages. Sometimes the "loading" icon circles for 5 minutes, and whether the page loads or not depends on my luck at that time.'''
Also, it has become seriously '''laggy''':
'''Scrolling''' up and down, typing and '''filling out forms''' (like writing this message) etc have slowed down.
I have deleted the history, and cleared the cache, but to no avail.
Could it be some of the add-ons?
Or is it that FF4 was all hyped up and '''''can't stand to it's name'''''? :)
Please help.
Info: Vista 64-bit, 4GB ram, 2.33GHZ....can't be my computer!

You could try to disable this feature for now by toggling this pref on the <b>about:config</b> page:
*devtools.debugger.source-maps-enabled = false

Takes a long time to load library

recently when I click on itunes to initiate....it takes a very long time to load library. Never used to do this. Any advice on how to correct this.

I have 192Gb of 999Gb left
That should suffice.
I have now disabled FACES, XML and previews. I'll test this shortly to see if it helps. I'm not sure what difference this will make to other apps.
That will be important, when you want access the APerture library from other applications using te Media Browser or when you want to sync your images to your deviced usin iTunes. For images, that you want to use in the Media Browser you will need previews, or for browsing your aperture library in quick Preview mode. You can craete previews indivudally, if you do need them only for selected images. If you want to use the Media Browser with third party applications, however, you will also need the XML. See:
Aperture 3.5: Set "Share XML with other applications" to "Never" for better performance and faster quit times
Okay. I've closed Aperture and reopened it 4 times. It appears to go through this 'IMPORTING FROM iCloud November 2013' every time.
Either it takes a very long time, or there is an image or a video in your Photo Stream that cannot be imported, because it is incompatible or corrupted.
For iPhoto libraries it used to help, to remove the current "Importing" or "Auto Import" folder from the library package. Try, if this will help for your Aperture library.
See this post by LarryHN how to do it:
TS3745 Re: iphoto library error message???
If you cannot get the import to stop this way, post back, Then you have to delete the photos from your Photo Stream or reset the Photo Stream.

List "View" with current time in column

Hi.
I know that list view does not support fields calculated on page load. But I have to realize such functionality.
Can someone provide options for realizing this?
"Hack" some internal SQL query, inject JS on a view page, use .NET code somehow?
Using JS seems as the best solution, but how can I do this?
Thanks.

Hi,
According to your post, my understanding is that you wanted to display the current time in colum.
The following code snippet for your reference.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
function date(format, timestamp) {
var that = this,
jsdate, f, formatChr = /\\?([a-z])/gi,
formatChrCb,
// Keep this here (works, but for code commented-out
// below for file size reasons)
//, tal= [],
_pad = function(n, c) {
n = n.toString();
return n.length < c ? _pad('0' + n, c, '0') : n;
txt_words = ["Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur", "January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"];
formatChrCb = function(t, s) {
return f[t] ? f[t]() : s;
f = {
// Day
d: function() { // Day of month w/leading 0; 01..31
return _pad(f.j(), 2);
D: function() { // Shorthand day name; Mon...Sun
return f.l().slice(0, 3);
j: function() { // Day of month; 1..31
return jsdate.getDate();
l: function() { // Full day name; Monday...Sunday
return txt_words[f.w()] + 'day';
N: function() { // ISO-8601 day of week; 1[Mon]..7[Sun]
return f.w() || 7;
S: function() { // Ordinal suffix for day of month; st, nd, rd, th
var j = f.j();
if (j < 4 || j > 20) {
return (['st', 'nd', 'rd'])[j % 10 - 1];
else {
return 'th';
w: function() { // Day of week; 0[Sun]..6[Sat]
return jsdate.getDay();
z: function() { // Day of year; 0..365
var a = new Date(f.Y(), f.n() - 1, f.j()),
b = new Date(f.Y(), 0, 1);
return Math.round((a - b) / 864e5);
// Week
W: function() { // ISO-8601 week number
var a = new Date(f.Y(), f.n() - 1, f.j() - f.N() + 3),
b = new Date(a.getFullYear(), 0, 4);
return _pad(1 + Math.round((a - b) / 864e5 / 7), 2);
// Month
F: function() { // Full month name; January...December
return txt_words[6 + f.n()];
m: function() { // Month w/leading 0; 01...12
return _pad(f.n(), 2);
M: function() { // Shorthand month name; Jan...Dec
return f.F().slice(0, 3);
n: function() { // Month; 1...12
return jsdate.getMonth() + 1;
t: function() { // Days in month; 28...31
return (new Date(f.Y(), f.n(), 0)).getDate();
// Year
L: function() { // Is leap year?; 0 or 1
var j = f.Y();
return j % 4 === 0 & j % 100 !== 0 | j % 400 === 0;
o: function() { // ISO-8601 year
var n = f.n(),
W = f.W(),
Y = f.Y();
return Y + (n === 12 && W < 9 ? 1 : n === 1 && W > 9 ? -1 : 0);
Y: function() { // Full year; e.g. 1980...2010
return jsdate.getFullYear();
y: function() { // Last two digits of year; 00...99
return f.Y().toString().slice(-2);
// Time
a: function() { // am or pm
return jsdate.getHours() > 11 ? "pm" : "am";
A: function() { // AM or PM
return f.a().toUpperCase();
B: function() { // Swatch Internet time; 000..999
var H = jsdate.getUTCHours() * 36e2,
// Hours
i = jsdate.getUTCMinutes() * 60,
// Minutes
s = jsdate.getUTCSeconds(); // Seconds
return _pad(Math.floor((H + i + s + 36e2) / 86.4) % 1e3, 3);
g: function() { // 12-Hours; 1..12
return f.G() % 12 || 12;
G: function() { // 24-Hours; 0..23
return jsdate.getHours();
h: function() { // 12-Hours w/leading 0; 01..12
return _pad(f.g(), 2);
H: function() { // 24-Hours w/leading 0; 00..23
return _pad(f.G(), 2);
i: function() { // Minutes w/leading 0; 00..59
return _pad(jsdate.getMinutes(), 2);
s: function() { // Seconds w/leading 0; 00..59
return _pad(jsdate.getSeconds(), 2);
u: function() { // Microseconds; 000000-999000
return _pad(jsdate.getMilliseconds() * 1000, 6);
// Timezone
e: function() { // Timezone identifier; e.g. Atlantic/Azores, ...
// The following works, but requires inclusion of the very large
// timezone_abbreviations_list() function.
/* return that.date_default_timezone_get();
throw 'Not supported (see source code of date() for timezone on how to add support)';
I: function() { // DST observed?; 0 or 1
// Compares Jan 1 minus Jan 1 UTC to Jul 1 minus Jul 1 UTC.
// If they are not equal, then DST is observed.
var a = new Date(f.Y(), 0),
// Jan 1
c = Date.UTC(f.Y(), 0),
// Jan 1 UTC
b = new Date(f.Y(), 6),
// Jul 1
d = Date.UTC(f.Y(), 6); // Jul 1 UTC
return ((a - c) !== (b - d)) ? 1 : 0;
O: function() { // Difference to GMT in hour format; e.g. +0200
var tzo = jsdate.getTimezoneOffset(),
a = Math.abs(tzo);
return (tzo > 0 ? "-" : "+") + _pad(Math.floor(a / 60) * 100 + a % 60, 4);
P: function() { // Difference to GMT w/colon; e.g. +02:00
var O = f.O();
return (O.substr(0, 3) + ":" + O.substr(3, 2));
T: function() { // Timezone abbreviation; e.g. EST, MDT, ...
// The following works, but requires inclusion of the very
// large timezone_abbreviations_list() function.
/* var abbr = '', i = 0, os = 0, default = 0;
if (!tal.length) {
tal = that.timezone_abbreviations_list();
if (that.php_js && that.php_js.default_timezone) {
default = that.php_js.default_timezone;
for (abbr in tal) {
for (i=0; i < tal[abbr].length; i++) {
if (tal[abbr][i].timezone_id === default) {
return abbr.toUpperCase();
for (abbr in tal) {
for (i = 0; i < tal[abbr].length; i++) {
os = -jsdate.getTimezoneOffset() * 60;
if (tal[abbr][i].offset === os) {
return abbr.toUpperCase();
return 'UTC';
Z: function() { // Timezone offset in seconds (-43200...50400)
return -jsdate.getTimezoneOffset() * 60;
// Full Date/Time
c: function() { // ISO-8601 date.
return 'Y-m-d\\TH:i:sP'.replace(formatChr, formatChrCb);
r: function() { // RFC 2822
return 'D, d M Y H:i:s O'.replace(formatChr, formatChrCb);
U: function() { // Seconds since UNIX epoch
return jsdate / 1000 | 0;
this.date = function(format, timestamp) {
that = this;
jsdate = (timestamp === undefined ? new Date() : // Not provided
(timestamp instanceof Date) ? new Date(timestamp) : // JS Date()
new Date(timestamp * 1000) // UNIX timestamp (auto-convert to int)
return format.replace(formatChr, formatChrCb);
return this.date(format, timestamp);
$(function() {
$('.ms-noWrap').text(date('l, F jS, Y, h:i:s A'));
</script>
Note: You should change the class name to fit your environment.
http://jsfiddle.net/licson0729/jHHsm/
More reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/580b9c50-f945-4931-b68f-da68d84e766e/how-to-display-current-date-time-in-share-point-using-jquery
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to retrive the new reocrds which are posted at the time of loading data

hi experts
i have a doubt
if we are performing a load operation at the time of loading if client posts some new records related to the current load is those records will be transferred to the target with the current load or we have to load them at the time of delta load, what will be the problems occurs at this situation
also we are having an option in RSA3 ---BLOCKED ORDERS is it going to helpful for this situation
also i found some answer like at the time of loading we need to lock the base tables so that the new data will be blocked is it the solution for the above scenario
thanks in advance

Hi Lokesh,
Not clear if you are referring to posting of records during an initialization activity or normal delta, full loads. In case of an initialisation for a LO Cockpit datasource you cannot allow any postings to be done in the source (ECC) system. In case of normal delta, full loads, the changes are stored in tables/extract structures/delta queues and are not affected by the changes in the source system during that time. The changes done during that time are captured in the next delta run.
Hope this helps!
You may want to refer to blogs from Roberto on the extraction methods and their operations.
Regards,
Kunal Gandhi

Firefox beta 18 "not responding" every time I load a page. This didn't occur as much with FF3.5.4.

I have tried various upgrades/updates of Firefox (4 and above). I currently have Firebox beta 18. EVERY TIME I load a page, the browser will always hang and I get "Not Responding" in the status bar. The hang time is usually more than a few minutes or I'd have to end the program through the task manager. Sometimes after the freeze, I'll get a "warning: script was unresponsive" popup and then it will freeze again (I can't even press 'stop script' or 'continue') because the popup is "not responding".
I don't seem to have this problem with FF3.5.4 (only this version has deemed compatible) however I can't view flash plugins/media or certain features of a webpage because it's not updated. Therefore I would not like to downgrade back to 3.5.4 because there's no point if I can't view half the things on a page..

If you've updated from a version as ancient as 3.5.4, then you run the risk of encountering problems. You should start with a fresh profile to ensure old preferences, data files and changes made by extensions are not interfering.
First, create a backup copy of your profile folder, just to be safe.
* [[Back up and restore information in Firefox profiles]]
Then use the Reset Firefox feature.
* [[Reset Firefox – easily fix most problems]]
If the problem persists, see the following article.
* [[Firefox hangs or is not responding - How to fix]]
Do not reinstall old versions of Firefox. They contain security vulnerabilities and shouldn't be used. Very old versions might also be unable to handle data files in your profile folder in their new formats, which can lead to all sorts of problems. And lastly, many websites require a modern browser to work properly.
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html

Azure Data Sync Log Take Too Much Time to Load

Hi,
I've found that the Azure Sync Log inside the Portal take too much time to load if my sync group was created long time ago. i.e. for those new sync group with only a few logs, it will take around 5 seconds for loading. However, I've many sync group created
more than 1 year, and it will take me up to 10 minutes for viewing the first page of the logs.
It seems the Portal will download ALL the logs to my browser even I just want to view the most recent logs (maybe I just want to view the last 10 records, but it will download the whole 5000 pages?)
It will be great if the Portal only fetch the data of the page I am currently viewing, instead of fetching all the logs.
Is there any ways to speed up the log loading time?
Michael Yung

Hello,
I suggest you post a feedback on
Azure SQL Data Sync feedback forum.
All of the feedback you share in the forum will be monitored and reviewed by the Microsoft engineering teams responsible for building Azure.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How can I get the current time in Xcelsius?

I'm reading in an XML feed containing dates/times, and I'd like to do a calculation to see how old it is -- but I can't seem to access the current time in Xcelsius (=now() doesn't work -- it only calculates once, when the model is loaded).
I can get around that (a bit awkwardly) with a timer, but I'd also like to know what the user's current time zone is... Any ideas?

Hi,
Maybe you could use a web service to return the required information - you can feed the timezone to the web service.
Have a look at this:
http://www.earthtools.org/webservices.htm#timezone
http://markitup.com/WebServices/TimeZones.asmx?op=CurrentDateTime
Best regards,
Jacob

Loading to Infocube

Hi Gurus,
I did load to InfoCube (Delta).We deleted the full and delta loads from the cube and dso.I am able to load the data Up to DSO is fine now.I executed the DTP from DSO to Cube but it didn't pick any load.Load was successful with Zero records transfered.Please share your thoughts on this issue.
Thanks,
Rani.

Hi,
Please check if you have any Start routine that acts as a filter when transferring data to the infocube.
Also you could check if the request in ODS is available for reporting, if not please update the status accordingly.
Please check the data mart status of the request in ODS also.
Regards,
Nitin

Current Time of Load on Infocube available in query report

Similar Messages

Maybe you are looking for