Current versions are not availble as Solution Manager Logical Components

I'm settinp up a new Enterprise Portal server in Solution Manager EHP1. The portal server software is Enterprise Portal 7 running on NW 7.0 SR3. I cannot assign this server to the Logical Component SAP Enterprise Portal in Solution Manager because of a version mismatch.
Only two versions of Enterprise Portal are available in Solution Manager
1.) SAP EP 6.0 ON WEB AS 6.20
2.) SAP ENTERPRISE PORTAL 5
Why are these my only choices?
I cannot create a new logical component under SAP Enterprise Portal because with the correct version because EP7 is not available.

You have to select SAP Netweaver and under that you can select usage type Enterprise Portal.
After EP 6.0, SAP changed strategies and EP 7.0 falls under SAP Netweaver 7.0.
- Digesh Joshi

Similar Messages

  • Wily Introscope is not running in Solution Manager 7.1

    Hello Experts,
    wily Introscope is not running in solution manager system,
    below error getting in log, solution manager is running on windows server and how to start wily in windows.
    8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    Please assist me on this
    Best Regards
    Hanuman

    Hello Srivastav,
    i am getting below problem in wily introscope log
    9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
    java.net.BindException: Address already in use: bind
      at sun.nio.ch.Net.bind(Native Method)
      at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
      at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
      at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
      at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
      at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
      at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
      at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
      at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
      at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
      at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
      at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
      at com.wily.introscope.em.internal.Application.start(Application.java:27)
      at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
      at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
      at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
      at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
      at org.eclipse.core.launcher.Main.main(Main.java:30)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
      at java.lang.Thread.run(Thread.java:662)
    9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
    9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
    9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
    9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
    9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
    9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
    9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
    9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
    9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
    Please help me to sort this issue,
    Best Regards,
    Hanuman Chinthalwar

  • What are configurations required on Solution Manager 7.0

    Dear Sir,
    I have asked to my Implementation Partner to implement Solution Manager with following details.
    Maintenance Optimizer Configuration, Usage, Hands on and Training. Patching using Solution Manager.
    a. Configuration Maintenance Optimizer
    b. Installation of Software Lifecycle Manager u2013 SLM
    c. Software Logistics Controller u2013 SLC
    d. SLD Registration
    e. Configuration for Transport Directory
    f. Support Package Manager u2013 SPAM (Specially on SM)
    g. Java Support Package Manager u2013 JSPM (Specially on SM)
    h. Usage of MO and Demo
    i. EWA Scheduling Using SM.
    j. EWA Recommendations Implementation
    Please let me know If I am forgeting any thing or needs to be configured for smooth running of our setup. What are thing to be configured??
    Please also let me give a brief(in addition to notes) about Usage of SLC, SLM, SLD, Transport Directory and How it will help in transport management system.
    Is it possible to apply patches from Solution Manager to all systems?
    Regards
    Dharmendra

    Dharmendra,
    There are many features with Solution Manager EHP1 SP 04.  See if you ask them to upgrade to latest level.
    Also following more features are available.  Depending on your company and your requirement you could configure it.
    - System Monitoring via central auto alert
    - System Availability monitoring (CCMSPING)
    - Central system administration
    - DBA Cockpit
    - CPH (Central Performance History)
    - Job Management
    - Project Administration
    and many more things are available.  Go through Link: [www.service.sap.com/solutionmanager] for more information
    Thanks,
    Digesh Joshi

  • EWA report is not showing in solution manager 7.1 SPS10

    Hi Experts,
    I have configured EWA in solution manager 7.1 SPS10 as per guides and best practices and managed system is showing perfectly for MOPZ configuration, RFC's are working fine but the Background job SM:EXEC_SERVICES completes in a  few seconds with job log content showing the error
    Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)
    The EWA alert is generating successfully in managed system and available at service market place but it is not showing in solution manager because of the above mentioned error
    Please let me know any solution for this problem.
    Thanks,
    Bharat.

    Bharat,
    Note  1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1  should have most of the answers related to EWA
    Also Make sure you add the system to active solution by using "Put in Solution".
    "Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)"  this msg is for sending alert to SAP. check if note 1925658 is implemented and also note 1984512.
    -SS

  • 2 Mountain Lion Servers: unable to create an OD replic as Mac OS X Versions are not compatible

    Hi folks,
    with tow Mountain Lion Servers -1 upgraded from Snow Leopard Server, 1 Upgrades from Lion Server- I cannot create the Open Directory replic to bind it to the master Open Directory. Both mac mini's are 10.8.2 with Server 2.2 (166). 
    I created a completely new Open Directory on Server1, when trying to create the replic on Server2 he tells me: "Your server cannot become a replic of "Server1", as the used Mac OS X Versions are not compatible."
    Have you any idea, how to make this work?
    Kind regards
    Conrad

    Hi wholestone,
    Welcome to the BlackBerry Support Community.
    Do you have iCloud calendar enabled? If so, this may be why your calendar is not syncing. You would need a copy of the calendar that is saved locally on your Mac and not in iCloud. This KB provides more information as well as a possible resolution. "Synchronization support of BlackBerry Desktop Software for Mac" http://bbry.lv/Sm1SeJ
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • "VLAN(s) are not available in Port Manager" in 7613

    Dear Sir,
    I got a problem when I try to create a VLAN in a 7613 router. The screen capature like the following:
    router(conf)#vlan 1045
    router(conf-vlan)#exit
    VLAN(s) are not available in Port Manager
    The VLAN is failed to create. The VLAN range which is failed to create is from 1001 - 1060. Is there any expert that meet the similar problem? and what should I do to solve the problem? so that I can create VLAN 1045?
    Thank you very much!

    Extended Range VLAN - FAIL
    I was reading an old post on CCIE talk about extended range vlans and I learned something new.  The post is here:
    CCIE Talk
    If  a Catalyst switch has any routed ports then it uses an extended vlan as  an "internal vlan" for that port. Why? I don't know but it's something  to take caution with if you run into any issues.
    Check it out:
    SW1#sho vlan internal usage
    VLAN Usage
    Now let's create a routed port:
    SW1(config)#int f0/24
    SW1(config-if)#no sw
    Now we have VLAN 1006 taken up:
    SW1#sho vlan internal usage
    VLAN Usage
    1006 FastEthernet0/24
    SW1#
    What happens if we try to create or modify VLAN 1006? Let's see:
    SW1(config)#vlan 1006
    SW1(config-vlan)#exit
    % Failed to create VLANs 1006
    VLAN(s) not available in Port Manager.
    %Failed to commit extended VLAN(s) changes.
    00:06:13: %PM-4-EXT_VLAN_INUSE: VLAN 1006 currently in use by FastEthernet0/24
    00:06:13: %SW_VLAN-4-VLAN_CREATE_FAIL: Failed to create VLANs 1006: VLAN(s) not available in Port Manager
    SW1(config)#
    FAIL. What if we were supposed to use VLAN 1006?  Shut it down, enable VLAN 1006, then re-enable the port.
    SW1(config)#int f0/24
    SW1(config-if)#shut
    SW1(config)#do show vlan internal usa
    VLAN Usage
    SW1(config)#vlan 1006
    SW1(config-vlan)#exit
    SW1(config)#int f0/24
    SW1(config-if)#no shut
    SW1(config-if)#exit
    SW1(config)#do show vlan internal usa
    VLAN Usage
    1007 FastEthernet0/24
    The switch uses the next number.
    http://ccietobe.blogspot.com/2008/12/extended-range-vlan-fail.html

  • What are installations material for Solution Manager 7.0 EHP 1

    hi friends,
    we plan to do installing Solution Manager 7.0 ehp1,
    can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
    thanks..

    https://service.sap.com/swdc
    ->  SAP Installations and Upgrades
    -> Installations and Upgrades - Entry by Application Group
    -> SAP Technology Components
    -> SAP SOLUTION MANAGER
    -> SAP SOLUTION MANAGER 7.0 EHP 1
    -> Installation and Upgrade
    Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
    Installation.
    Nelis

  • Updated FCP X versions are not showing up

    Updated FCP X versions are not showing up in my App Store upgrades. Apple has been less than helpful other than to verify that I'm looking in the right iTunes account. Can anyone tell me why I can't see the updated versions? I can see my updates for both compressor and motion.

    You probably have the app purchase "hidden" in the App Store.  See this tech note for further details:
    http://support.apple.com/kb/HT5149
    When you reinstall FCPX it should show as already purchased and allow you to just download it again.  No charge as far as I know.

  • The types of the parameter field and parameter field current values are not compatible.----

    HI,
    I am attempting to set report parameters in my .jsp code via URL parameters.
    I am able to set the report name, server connection dynamically however when attempting to set the Parameters I receive:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException: The types of the parameter field and parameter field current values are not compatible.---- Error code:-2147213303 Error code name:invalidParameterField
    The parameter on the report is a String Type, named for this example p1.
    The value that p1 represents is LERAD
    My code:
    String stringValue = request.getParameter("p1");
    CRJavaHelper.addDiscreteParameterValue( clientDoc, "","p1", stringvalue);
    returns the above mentioned error.
    I have tried:
    String stringValue = (String)request.getParameter("p1");
    which returns the above error
    And;
    String stringValue = new String(request.getParameter("p1")).toString();
    which returns
    java.lang.NullPointerException
    java.lang.String.<init>(Unknown Source)
    org.apache.jsp.callReport_jsp._jspService(callReport_jsp.java:105)
    org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
    I notice that the CRjavaHelper.java declares this addDiscreteParameterValue as accepting an Object type for the newValue.
    Any ideas???

    Hi,
    nevermind.
    case sensitivty strikes again.
    my URL param was P1 ( case sensitive)

  • The product version and database version are not compatible

    The following simple program gets an exception {The product version and database version are not compatible} its very hard to proceed from here. Does anybody know what cause this?  
    Best Regards
    Jan Isacsson
    using System.Collections.ObjectModel;
    using Microsoft.MasterDataServices.Deployment;
    using Microsoft.MasterDataServices.Services.DataContracts;
    namespace MdsDeploy
        class Program
            static void Main(string[] args)
                try
                    ModelReader reader = new ModelReader();
                    Collection<Identifier> models = reader.GetModels();
                    foreach (Identifier modelId in models)
                        Console.WriteLine(modelId.Name);
                catch (System.Exception ex)
                    Console.WriteLine("Error: " + ex.Message);
                Console.ReadKey();

    Hi Jan,
    For the error "The product version and database version are not compatible", as Emma said, the version number of the Service does not match the database schema version.
    In your scenario, which version of database are you using? Please note that MDS update required after SQL 2012 SP1 installation, please refer to the links below to see the details.
    http://byobi.com/blog/2012/11/mds-update-required-after-sql-2012-sp1-installation/
    http://msdn.microsoft.com/en-IN/library/gg488708.aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • What features from previous versions are not available in Adobe Photoshop Elements 12?

    What features from previous versions are not available in Adobe Photoshop Elements 12?
    A handful of features from previous versions are not available in Photoshop Elements 12 due to new product support for 64-bit systems.
    Below, we list the features and the easy alternatives available to you in version 12:
    The Magic Extractor ToolAlternative: Use the Quick select tool together with the Refine Edge tool to quickly select and extract anything from your photos.
    Texture Fill
    Alternative: Use the Edit > Fill Layer option and select the "Pattern" option for Contents. You would have to pre load the pattern file with the texture you want.
    Here is a tutorial on how to create a pattern file: http://www.hongkiat.com/blog/creating-custom-pattern-in-photoshop/
    Frame from video (imports a frame from video in PremiereElements)Alternative: Use the freeze-frame feature in Premiere Elements to capture a frame in video and save it as a photo
    Interactive layout mode in Photomerge PanoramaAlternative: None
    Photoshop ShowcaseAlternative: Try Adobe Revel. Elements 12 will let you view and share your Elements photos and videos across smartphones, tablets, and the web, via Adobe Revel.
    Enhance>Adjust Color>Color VariationsAlternative: None specifically, but you can use Auto Smart Tone
    Filter>Render>Lighting EffectsAlternative: None

    I thought Adobe staff only came here in their "spare time"?

  • How to buy apps that are not availble in my region?

    How to buy apps that are not availble in my region?

    No.
    you can ONLY use the itunes store of your country of residence (proven by the issuing country of your credit card and the valid billing address of that card) and ONLY while you are physically located inside the borders of that country.

  • Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

    Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

    Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

  • We sent you three weeks ago add-on ImageExchange 2.9.4 and it still did not pass "fully reviewed" is there a reason? The current version do not support FF 18

    We sent you three weeks ago add-on ImageExchange 2.9.4 and it still did not pass "fully reviewed" is there a reason?
    The current version do not support FF 18 so the issue is urgent
    Thanks
    Eyal Shaked - Picscout

    I talked to the Addons people, and apparently your add-on was rejected several weeks ago. They said to read the email you received from them for those reasons. I'm locking this thread as this is a Firefox support forum, not an extension dev support site.

  • Wily Introscope is not running in Solution Manager 7.1 and tech monitoring

    Hi Experts,
    we are able to log in wily introscope, But metrics(values) are not coming in wily
    we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
    2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
    thanks in advance for you help
    Best Reg

    Hi Srivastav.
    Actually i am new to solution manager, and we have done basic steps of solution manager like
    system preparation,basic configuration,managed system configuration and technical monitoring,
    in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
    my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
    currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
    Best Regards,
    Hanuman

Maybe you are looking for

  • Getting Error in Adobe Form as Script failed (language is formcalc:context

    Hi Experts, While acessing Adobe forms from MSS , After Selecting the Scenario After Edit Form Before the form is Displayed I am getting a POP-UP message stating the following Error. Script failed (language is formcalc;context is xfa[0].data[0].Reque

  • CS5 editing mode not supported and file import error

    Hi.  I edited a series of projects on PP CS5 on my iMac.  My computer crashed, so I am now working off my MacBookPro to finish off a few projects.  I have PP CS5, Final Cut Pro, and Quicktime all installed.  I have also downloaded all the ProAppsQTco

  • Pro Res 4444 to Pro Res 422

    I have Pro Res 4444 footage that I want to edit in FCS for the web.  My understanding is that it would be better to work in Pro Res 422 (easier to work with etc).  Would it make sense to import the Pro Res 4444 in FC and used compressor to export it

  • The 'IBMDADB2' provider is not registered on the local machine.

    Hi Experts, Need you help on this I am trying to migrate an application from Windows Server 2003 (32 Bit), IIS 6 to  Windows Server 2008 R2 (64 Bit), IIS 7. But i am getting The 'IBMDADB2' provider is not registered on the local machine error  when i

  • Quicktime movies with both pics and videos don't upload correctly to YouTub

    I have a Quicktime movie with pictures, video clips and music. The quicktime movie plays fine in Quicktime, but only the video parts upload to YouTube. How do I fix this? I have tried converting from mov to flv before uploading and same problem. I ha