Current View option in the Print dialog box

I have a PDF file, approximately 55 pages that is comrpised of 50+ .jpg images that were combined into a single PDF file. The images are various size screenshots from Facebook.
I need to be able to print the entire file at 75% magnification in order for every page to be readable. Only way in Adobe’s print dialog box that I can find to do so is select one page at a time, select “Current View” and then print.
When "All" is selected under Print Range in the Print Dialog box, the pages print at different magnifications, most below 10% and unreadable.
Is there a way to get the entire document to print in the “Current View” setting or at a specified magnification?
I’m using Adobe Acrobat 9 Pro.
Any help would be greatly appreciated.
Thanks

duh...
Figured out I had to tweak it in the "copies and Pages"

Similar Messages

Is it possible to Default "Choose page source by PDF page size" option in the "Print" dialog box?

I have an SSRS report that is rendered as a PDF file; the report has many columns and utilizes 11inx17in (Landscape) paper. However, once the report is rendered and users try to print the report they have to manually select the 'Choose Paper source by PDF page size' option in order to get the report to print on the correct paper (otherwise it defaults to standard letter size - landscape orientation).
I'm aware of 'Print Presets' functionality; however, I don't believe they apply to this scenario. Is there a config file/registry setting/anything that can be specified to automatically set the 'Choose paper source by PDF page size' print setting = On/True/Checked?
Any help would be greatly appreciated...

Anybody out there?

HT3669 Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this opt

Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this option?

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Hi Sara,
The problem is every time I try to copy a page from a website or attachment sent to me or anything that I don't create, the dialog box says I have to save it before I can print -- there are no other options on the dialog box. Very frustrating -- one of the girls in my office is having the same problem and we can't find a way around it.
Hope you can help
Thanks
Carol Laskos
"Sara.Forsberg" <[email protected]> wrote:
Sara.Forsberg created the discussion
"Where do I find the printer dialog box to change the setting that asks me to save a file before printing"
To view the discussion, visit: https://forums.adobe.com/message/7070517#7070517
>

How to suppress the Print Dialog Box?

Running an (ASP.NET /Crystal Reports 2008) application and using CrystalReportViewer control. Is there way to suppress the print dialog box when I click the print icon on the report tool bar?
Edited by: juRamz on Aug 26, 2009 2:54 PM

Hello,
Sort of, CR needs the info. Only option is to create your own print button that has all the info filled in. It's a Windows Framework Common dialog box that CR calls so it's the OS that is prompting for the info.
Using ReportClientDoc here's a possible solution, note that this too has a dialog box to select the printer:
private void button1_Click(object sender, System.EventArgs e) // Print To Printer button
    System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
    PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
    CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
    //CrystalDecisions.CrystalReports.Engine.PrintOptions newOpts = new PrintOptionsClass();
    pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
    rasPROpts.PrinterName = cboCurrentPrinters.Text;
    rasPROpts.PaperSize = (CrPaperSizeEnum)
        pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
    rasPROpts.PaperSource = (CrPaperSourceEnum)
        pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
    // new API added to allow changing printing options
    newOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions();
    newOpts.DissociatePageSizeAndPrinterPaperSize = true;
    rptClientDoc.PrintOutputController.ModifyPageMargins(0, 0, 0, 0);
    rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
    MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Can't see printer name in the print dialog box as the printer name is too long

This is actually causing siginificant pain as I am using a tablet and moving around a number of floors/buildings needing to be able to print from where I am.
When printing from Acrobat reader, the print dialog box that comes up does not have a horizontal scroll bar and does not fit in the names of the printers in my organisation. We are unable to change the printer name, so it basically means that when using Acrobat, we can't select a printer.
All other windows applications show more characters and also have a horizontal scroll bar in the print dialog box so you can scroll across to see the rest of a long printer name. Why is acrobat not using the standard windows print dialog?
Has anyone come across this? Help!

This is the Acrobat forum, not the Reader forum. In the future you should check there. I am not sure why you can not change the printer name, unless you do not have administrator rights. The name of the printer has nothing to do with where the print copy is sent. It is just for the purpose you mentioned of identifying the printer to print to. If you are not the administrator, ask your IT folks to change the name for you and explain why.

Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported.

I downloaded Indesign CS3 trial and liked everything about it until I attempted to print to postscript and got that message. Nothing I have tried has helped. I have seen in various forums that others are having the same problem, but haven't found any solution offered. I am running Tiger 10.4.10 on a new Intel Imac with 3G ram. This is a procedure I use very often in my workflow, and have never had this problem with CS2 on my PC or other Macs. Is there a solution? I downloaded the .1 update and installed that and it didn't change anything.

PLEASE SOMEONE HELP ME.
Its the first time Im using print booklet option to save my file. I have the same problem when trying to save as pdf and get the
"The Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported."
I'm trying to save a .pdf of a booklet of a facing pages document of A4 size each facing page for a whole size A3, then hope to let the pages be correctly arranged by inDesing, then print and staple.
Meaning pages will be like this - Page #60 left side [of the A3] - page #1 right side [of the A3] , page # 2 right side[of the A3] - page #59 left side[of the A3] etc...
I CANT DO IT. I tried to follow Melvin Thompson , but when I choose save .ps and open it in preview all I see is independent a4 pages and just the left ones , .. How can I save my file as .pdf ready to be printed in a3 ?
I really appreciate any help.

The Save as PDF option in the Printer dialog is not supported.

My client is asking me to save a separations PDF file. But whenever I save it to PDF, a this message pops out: The Save as PDF option in the Printer dialog is not supported. I'm using InDesign cs5 and Adobe PDF 9.0. I'm on Mac OS X 10.6.6.

What it says is correct, have a look at this post here.

PUT BACK THE MISSING THE SCREEN FUNCTION IN THE PRINT DIALOG BOX!!!!

Hello all...
I am a creative director in the screen print (garment industry) for over 20 years. We have always used PS to directly print and control our halftone screens and angles through the screen function in the print dialog box. Now it has miraculously disappeared after so many versions previous.
I emplore Adobe and their team to please update this function back into CS5.
Although it is a function many might not even understand how to use, it is IMPERATIVE to the screen printer/artist in this industry.
There are workarounds, of course, but they are much more tedious and time consuming.
I truly cannot convince enough that we folks in this industry want this function back!!!!!

You might want to also post in these Fora:
Photoshop Feature Requests
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop

I cannot and never have been, able to open a file that has been previously saved to hard disk by choosing the print to file option in the print dialogue box

'''I cannot and never have been, able to open a file that has been previously saved to hard disk by choosing the print to file option in the print dialogue box. Firefox displays gooblygook even though the file name is an html, Windows Notepad crashes, MS Excel does not recognise the file type. MS Word displays goobblys also when the file has no filename extension.'''

If you use print to file then you get a file that is meant to be send to a printer and that file has all kind of formatting code for that specific printer.
Opening such a file in Firefox or a text editor can only work if you use a text only printer to print the file to, so make sure that such a printer is installed and selected.

CS6 Photoshop: One newly-created PSD filewon't print because the print dialog box won't appear altho the file properties appear to be the same as other files that do print.

CS6 Photoshop: One newly-created PSD file won't print because the print dialog box won't appear after selecting File > Print. Then "Print" becomes grayed out. The file properties such as permissions, are the same as other PSD files that do print. This file also cannot be converted to Adobe PDF, which is not offered as choice under "Save as", whereas other can be. I've exited, reopened Photoshop, restarted computer, checked out other CS6 PSD files which do print, nothing changes. The 52 MB file has been flattened. OS is Windows 7. Thanks for any suggestions.

Sounds like the printer driver is having some problems.
Try holding the space bar down when you select Print (which makes the print dialog NOT load previously used settings).

Put adobe as an option in the printer selection box

how do you place adobe as an option in the printer selection box - when i do online remittances from my bank the remittance sheet only shows a print icon - if you hit it i only have the printer, fax and xps document writer as a selection i am using win7 it used to be in the window of the printer selction when i was using winxp can you solve this for me

Yes I have acrobat the thing is on the XP there was a selection as save as an PDF File and that was in the Printer Box where u can select the printer you want to use. But there is no option for this - the reason is again on the bank that I use when you fill out and send your remittance up comes a statement of what you sent date, beneficiary exchange rate etc. you have the option to print this sheet there is no save option on this so when I used hit the printer icon there comes the printer information and on this there was a choice of the printer or save to adobe. That is missing now and I don't know how to get it back you can only do snip it and save that to the file.
Can you advise on that?

After the latest two updates, whenever Firefox starts, the print dialog box appears automatically. Why, and how do I stop this?

Not much else to add. The print dialog box just opens every time Firefox is started or restarted.

Check the Home page setting:
*https://support.mozilla.com/kb/How+to+set+the+home+page
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Is here a way to disable the print dialog box?

I am trying to disable the print dialog box so that a page can print directly from a javascript "print" command. How can I disable the print dialog box so that it will print automatically?

You can try creating a new boolean preference - '''print.use_native_print_dialog''' - and set it to '''false''' and see it that still works. That pref was removed from about:config a number of versions ago, but the underlying code might still be present, so give it a try.
http://kb.mozillazine.org/About:config

Current View option in the Print dialog box

Similar Messages

Maybe you are looking for