Currently Known iPhone 6/6+ Issues - Disheartening

I am concerned about some of the issues I see popping up regarding the new phones as I surf these forums.
- Bending (quite possibly a media-fed overblown story)
- Screen uniformity/discoloration (yikes!)
- Ear speaker volume real low (double yikes!)
Ignoring the bending issues, can any of you speak on the other two? Are these widespread or simply the usual small batch of issues that pop up with any tech device manufacturing?
Are many of you holding issue free new iPhones?
Thanks.

I've had my iPhone 6 now for two weeks.  I've had ZERO issues.  My phone's screen is perfect.  My speaker works just fine.  Bluetooth works.  And I've never for a second been concerned about the phone bending......

Similar Messages

  • A list of known iPhone 4S' iOS 6 issues?

    Hello.
    It seems like many people are having issues with iOS 6 upgrade on their old iPhones (not the new 5). Is there a list of known iPhone 4S' iOS 6 issues of them so far?
    Thank you in advance.

    From this discussion   https://discussions.apple.com/message/16977127#16977127  the pairing is reported as possible.
    Pairing of your iPhone with other iPhone was not successfull. May be not done in the right way.
    iPhone pair with many BT devices without any problem.  I have Samsung Headset and they work.
    I would suggest you go the the shop and ask them to try with an head phone or let an Apple store check your BT.

  • Restoring from iPhone 5 to iPhone 6 Plus issue

    Yesterday, I received my iPhone 6 Plus in the mail via AT&T.  Before I started with the new phone, I checked my current phone, iPhone 5, and it showed a iCloud backup from earlier that day.
    I chose to use iTunes to backup my iPhone 5 and selected the 'Use Encrypted Backup' option because I wanted it to remember passwords and other things that an iCloud backup would not to make the transition easier.
    After I started the backup, it took about 5 minutes to complete and then about 2 or so hours to copy all of the apps off my iPhone to my computer via USB cable.  I hadn't used iTunes to backup my iphone since my iPhone 3G with older iOS many years ago. Once the iCloud backup option was there, I used that.
    So, once it copied all my apps and I was satisfied that the backup was complete, I turned on the iPhone 6 Plus.  Once it got to the spot where it asks if I want to set it up as a new phone or restore from an existing phone, I chose that and told it to restore from an iTunes backup. It prompted me to connect the cable and away it went. It did say that there was an update to 8.0.2, but I chose not to update at the time figuring it may cause issues, so I simply skipped that step planning on updating the iOS after I had my phone restored and ready to go.   It started the restore and the phone restarted twice and then came up to the "Welcome" screen to set it up. iTunes said it was going through a sync, which I expected, to copy over all my photos, ringtones, and apps that were backed up. However, the process seemed to stall on Step 6 of 6 "Waiting for changes to be applied."   I let it sit about 2.5 hours or so and there was no change in the message nor any indication that it was doing anything.  In the iPhone details in iTunes, I could see that it had all my screens set correctly and showed all the apps, but they were grayed out like they weren't there. Indeed, when looking at the phone, it had only the stock apps showing.
    I figured something happened with the restore, so I wiped the phone and started over.  This time, I let it update to iOS 8.0.2 since my previous iPhone 5 backup was from iOS 8.0.2.  Though the same thing happened again where it stalled at Step 6 of 6 "Waiting for changes to be applied."  I again let it sit about 1.5 hours with no change at all.
    So, for a third time, I wiped the phone and started over. I let it update to 8.0.2 and it did its thing with syncing.. It again seemed to stall at step 6 of 6 "Waiting for changes to be applied."  After 30 minutes with no indication of it doing anything, I clicked on the stop sync option. I saw all my phone screens with my app layout correct in iTunes. So, I hit the Sync button. this time, after getting to Step 6 of 6, it showed it was copying over photos from my computer, my ringtones, and then each app to my phone.  When the sync was completed, I disconnected the phone and everything looked right. I could connect to my iCloud account.. All my email accounts were set up and I didn't have to enter the password. My iMessages were there.  Everything looked good.
    The only concern I have is that I never actually got a "Restore Complete" message.  I'm guessing its because I technically stopped the initial sync after the restore.   Or does it not show that and the restore was actually completed when it rebooted my phone twice and brought up the "Welcome" screen where you set a few of the options like wi-fi, location services, etc.   When I go into my iCloud settings in to the backups, there is no message there saying that a restore is in progress.  It did show that before when I looked when the previous attempts stalled at Step 6 of 6. 
    Is this something I should be concerned about or since everything looks to be working properly its good to go?

    I am having the same issue!  I received my new iPhone 6 plus from atnt yesterday at 10am ... activated it and asked phone to restore from my sprint iPhone5s backup at 10:30 am.  It is now 2:17pm the next day and most of the apps that are incomplete are still incomplete right now.  What can I do to fix this or do I have to just wait?

  • "Currently known" in Swedish

    Hi all
    I have a quick question about the currently known operator. It is working very well in 10.3 in an English rulebase.
    So for example,
    the application is confirmed if
    it is currently known whether or not the person is the applicant
    when I load up the debugger or in an ODS request, the value of "the application is confirmed" is initially set to FALSE, since "the person is the applicant" is initially unknown. This works great.
    However, if I do this:
    the application is confirmed if
    it is known whether or not the person is the applicant
    Then actually, "the application is confirmed" is initially unknown and actually will remain unknown until I set "the person is the applicant" to TRUE FALSE or UNCERTAIN.
    Anyway, this is not an issue in English since we can use currently known.
    However, in Swedish, we do not have a translation for "currently known"...
    I am trying to write:
    personen är den kända sökande om
    det är bekant antingen personen är den sökande
    The hidden text for the boolean above goes to [known b1] but in the English "currently known" statement, the hidden text is [not unknown b1]. Whatever I try, I cannot replicate the [not unknown] in Swedish.
    I have also tried *det är okänd att [eller inte]<attr>* and no luck either.
    Any suggestions on how to get the [currently known] functionality in Swedish?
    Thanks,
    Ben

    The only workaround would be to manually edit the file "C:\Program Files\Oracle\Policy Modeling\language\Swedish\templates.xml" and add the following under the heading "<!-- statement operators -->":
    <template name="it is currently known whether (or not)" type="boolean" category="Knowledge States" function="known">
        <match>det är närvarande bekant antingen<commit/> <opt>eller inte</opt> <expr name="expr" type="boolean" level="premise"/></match>
        <replace>not unknown <expr name="expr"/></replace>
    </template>You can then use:
    personen är den kända sökande om
    det är närvarande bekant antingen personen är den sökande
    This will give you [not unknown b1] where b1 is "personen är den sökande"

  • IPhone 5 Calendar Issue: January 1, 1995

    I flew from the Eastern Time Zone into Central Time Zone, which is my home time zone, this afternoon, and tonight my iPhone 5 is telling me the date is January 1, 1995. Can anyone help explain why this is happening, and/or how to fix it? It sometimes switches back to the correct date, but only for a minute or less. I have restarted my phone twice and it has not worked, even when I kept my phone off for over an hour. When the date is January 1st, 1995, I cannot send texts, or go onto the internet, or use any apps using data. PLEASE HELP!!
    Much thanks

    Hello rossiegee,
    The article linked below details some useful information that can help resolve issues with an incorrect date on your iPhone.
    iOS: Troubleshooting issues with date and time
    http://support.apple.com/kb/TS3920
    Cheers,
    Allen

  • Hi. I brought a new iphone 5 and I wanted to restore it to one of my previous iclouds but it's not letting me - the icloud backup is a iphone 5 6.1 ios and my current is iphone 6.0.1 - please advise what i should do...

    Hi. I brought a new iphone 5 and I wanted to restore it to one of my previous iclouds but it's not letting me - the icloud backup is a iphone 5 6.1 ios and my current is iphone 6.0.1 ios - please advise what i should do...

    Hi ldyazch,
    You will need to set it up as a new phone, not from a backup, first. Then, after setup is complete, go to Settings > General > Software Update. Make sure you are connected to Wi-Fi and have at least 50% battery power. After then update downloads and installs, you can go to Settings > General > Reset > Erase All Content and Settings.
    This will let you go through the setup again, and this time you can choose your backup.

  • I am currently using iphone 5 and i want to upgrade my phone to ios7 i want to know is it necessary to keep backup of contacts?

    i am currently using iphone 5 and i want to upgrade my phone to ios7 i want to know if it is necessary to keep backup of contacts?

    As with every computing device, a backup is your ONLY insurance should anything ever go wrong with your device.
    Without a backup, if something does happen to go awry, you will loose whatever you have not backed up.
    So my response is, of course you need a backup.  You always need a backup, no matter what.

  • Is there a way to get my current 3G iphone upgraded to 3GS without buying another iphone?  Thanks

    Is there a way to get my current 3G iphone upgraded to 3GS without buying another iphone?  Thanks

    No.

  • Changed Apple ID password and now Iphone 6 having issues

    I had to reset my password when signing into my apple ID and now my Iphone is having issues.  I can not use imessage. Under settings, It will not allow me to turn it on.  Also under settings my facetime and iCloud are greyed out.  I can using os8.1.2  What am I missing?

    I had the exact same problem and this solution from another thread worked for me:
    "I was able to fix it by entering another email address even though it was wrong/invalid. Once I got the "incorrect email/password" message I then re-entered my actual apple ID and it finally took it. Make sure FaceTime is enabled and working first."
    In the FaceTime App, I entered a fictitious Apple ID and password. Then it actually signed me out. After that, I entered my AppleID and my new password and it did verify my email address.

  • IPhone 4s charge issues

    Hello, my iPhone 4s goes to Apple logo when I plug it in to charge, but it doesn't charge. What should I do? Replace the charger, and the battery?

    Hi be.okey,
    If your iPhone is having issues with charging I would suggest that you troubleshoot using the steps in this article -
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Currently the iPhone does not offer video out capabilities

    Currently the iPhone does not offer video out capabilities. Will there be a software update enabling the iphone to have this feature ? And wll the myvu universal work with the iphone if there is an update available ?

    Hey unclescotty,
    The iPhone does support video out with the 1.1.1 update. You'll just need an Apple Component AV Cable.
    http://docs.info.apple.com/article.html?artnum=300233
    Just update the iPhone through iTunes.
    http://docs.info.apple.com/article.html?artnum=305744
    Jason

  • I am currently using IPhone 4, but recently bought an IPhone 4s. Is it possible for me to keep using both phones? The IPhone 4 will just be an Ipod Touch and Iphone 4S will be my new phone. Thanks..

    I am currently using IPhone 4, but recently bought an IPhone 4s. Is it possible for me to keep using both phones? The IPhone 4 will just be an Ipod Touch and Iphone 4S will be my new phone. Thanks..

    Using an iPhone without a wireless service plan

  • It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps.  Any thoughts?

    It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps.  Any thoughts?

    Hi clintfromid,
    Thanks for using Apple Support Communities.  I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    - Ari

  • I am frequently experiencing Iphone 5 camera issues, while taking photos all of the sudden the camera going to hang mode

    Hi,
    Greetings !!!
    I would like to know what is the root cause of Iphone camera hanging ?
    I am very frequently experiencing Iphone 5 camera issues like while taking photos all of the sudden the camera going to hang mode with full of pink & black line.
    I noticed while camera app turns ON the phone going to hand.
    I went to apple services server with this problem & they said they didn't see any errors.
    Kindly response with my request, and provide me the solution.
    Thannks & regards,
    -Vamsi

    That often happens with cameras when you take pictures of a computer screen. LCD screens "flicker" and the camera will often catch the flicker.

  • IPhone-iTunes Syncing Issues  (3G Phone w/ 2.2 Firmware & iTunes 9.0.1)

    Please feel free to inform me if this inquiry might be better posted in a different section of the discussion forums.
    *iPhone-iTunes Syncing Issues*
    (3G Phone w/ 2.2 Firmware & iTunes 9.0.1.8 running on a Dell PC w/ Windows XP Pro Operating System)
    With the newest 9.0.1 version of iTunes...
    When you synch your Windows XP Pro PC with your iPhone (3G) device & instruct the software to synchronize your iPhone Safari "Bookmarks" with your PC's Internet Explorer "Favorites," should there not be a bi-directional transfer of the information?
    (from iPhone to PC and also from PC to iPhone?)
    I synched my phone yesterday & it appears that there was a successful transfer of Internet Explorer "Favorites" into the iPhone. However, neither were my iPhone Safari "Bookmarks" retained on the iPhone nor were they transferred over to the PC (& into Internet Explorer).
    Do I need to also install Safari on the PC to get a successful bi-directional transfer? OR am I simply not looking in the correct place on the computer to retrieve all the Bookmarks that were apparently removed from the iPhone?
    Furthermore, I've been experiencing difficulty with getting PodCasts that are already sitting in my iTunes account to transfer over to the iPhone 3G.
    When I launch the synch operation, commonly the iTunes progress meter will seemingly go to completion. However, the iPhone will ultimately disappear from the left-side iTunes windowpane & the actual iPhone screen will continue to state: "Sync in Progress." The iPhone will remain in this state for HOURS & HOURS, until I ultimately slide the button to cancel the operation. I have literally left the iPhone connected to the synch computer while the iPhone's "Sync in Progress" status message remained the same for *17+ HOURS. This can not be normal*.
    Any insight would be helpful.

    Note: I resolved the issue by uninstalling and reinstalling itunes with this procedure;-)
    http://support.apple.com/kb/HT1224?viewlocale=en_US

Maybe you are looking for