Currently my HP desktop (Windows 7) is stuck in a constant loop............

............Before that, I had a problem with the IE not operating properly (suspected causes were possibally : ROOTKIT.SIREFEF.SPY, and/or TROJAN.FAKE.AD-DOWNLOAD). After that, for the first-ever I was not able utilize the SYSTEM
RESTORE feature because it was mysteriously disabled! And then when I was able to enable it, however, it did not display any restore points prior to the occurance that started this sequence of unfortunate events! One more problem that
made it even more difficult to resolve this issue. When using any/all of the repair features available in SAFE MODE or after inserting any of the various operating system discs that I had, I do not remember if I chose a password in BIOS (at the
time of my purchase of my HP) or if I did, what that password was. I was just wondering what options i have regarding this issue, if any!

Please see:
Cleaning a Compromised System
Carey Frisch

Similar Messages

Updated my iPad 3 to iOS 6 now it is stuck in a constant loop of restarting

I updated my iPad 3 to iOS 6 but now it is stuck in a constant loop where it restarts on its own. I have tried resetting the network settings but it did not work.

I presume you mean to say that the iPad is not being recognised in iTunes! If so,
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are not faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

Yoga 2 Pro Windows 8.1 stuck in automatic repair loop

So my Yoga 2 Pro is stuck in the (in)famous Windows 8 Automatic Repair Loop, and I'm not sue how to fix it now. I unfortunately neglected to create a Recovery USB stick, so what are my options without it?
I've already tried booting the computer with the Novo button and choosing System Recovery, but at that point the system goes right back into the Automatic Repair loop. I'd strongly prefer to back up my data before resintalling Windows if that's an option--is it possible to stick the SSD into another computer to do so?
Also, would a USB recovery disc created by someone else with a Y2P be useable on my system? I don't need the full partition image since the one already on mine should suffice. I'm also unsure of my system's Windows 8 Product Key, where can I get that if/when I do need to reinstall Windows?
Thanks for any help, it's greatly appreciated.

First and foremost, good luck:
Method 1:
Wait for the machine to boot into the 'Automatic repair couldn't repair your PC' error message.
Click the 'Advanced Options' button
Open cmd and type:
bootrec /fixMBR
bootrec /Fixboot
bootrec /rebuildBCD
and also
chkdsk /r c:
chkdsk /r d:
Method 2:
https://www.youtube.com/watch?v=iNKEsOF7e4M
Method 3 (copied from a youtube comment):
1. Turn on the computer.
2. Wait for the machine to boot into the 'Automatic repair couldn't repair your PC' error message.
3. Click the 'Advanced Options' button
4. Click the 'Troubleshoot' button
5. Click the 'Advanced options' button
6. Click the 'Startup Settings' button
7. Wait for the system to reboot into the 'Startup Settings' menu (is the same menu for safe mode)
8. Select the 'Disable early launch anti-malware protection' option. (Press '8')
9. If this worked for you, you should now boot into windows.
10. Now you can shutdown your system and it should hopefully work first time the next time you start the system.

Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

This ANE doesn't support Desktop(Windows) platform

When I try to add ANE extension to FB 4.7 get this error "This ANE doesn't support Desktop(Windows) platform". Is this a bug ?

By default, when an ANE is imported in to a Flex/ActionScript mobile project, it lets you know what are the un-supported targets for that ANE( i.e., both iOS and Android on device and current desktop) whichever are applicable. So its not a bug, it is the expected behaviour.

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
http://www.stratospherix.com/products/filebrowser/
Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

How to detect what keyboard is currently active on desktop?

Hi there, I'm working on a virtual keyboard (window with buttons as keys) for my swing application. When I show keyobard window I would like to adjust the layout of my virtual keyboard to system keyboard that is currently active on desktop. But I don't know how to detect what keyboard is currently active. How to detect this? Thank you.

I answered my own question - see
http://forums.ni.com/t5/LabVIEW/Loading-and-Running-a-VI-on-a-cRIO-from-a-PC/td-p/796657
On the Real-Time CompactRIO Properties > VI Server, you must check the box for TCP/IP protocol, which by default is unchecked.
Also, when you make a Build Specification for a VI and set it to run on startup, you can still enter the VI name (not c:\ni-rt\startup\startup.rtexe) as the VI Path on the Open VI Reference.

Windows 8 install stuck at "setup at starting"

I boot windows 8 from usb last month,,but it wont read from dvd, so i decided borrow my friend's win8 bootable...
but it stuck at purple screen and "Setup is starting" message..
somebody please help me,,,because winxp isnt supported anymore to download executable files...
Help me!
ps
-I speak Indonesian too.

Hey Muhamad,
Contact your computer manufacture to inquire about an updated Basic Input/Output System (BIOS).
Modify your computer's BIOS the following ways:
Change the Plug and Play settings. For example, if Plug and Play functionality is currently being controlled by the BIOS, change it so it is controlled by the operating system.
Enable or disable Universal Serial Bus (USB) support.
Disable power management support.
Disable infrared support.
Disable all serial ports.
Remove non-essential hardware devices one at a time. This includes a second video adapter, Small Computer System Interface (SCSI) adapters, modems, sound cards, network adapters, and other non-essential
Industry Standard Architecture (ISA) adapters, Peripheral Component Interconnect (PCI) adapters, and PC Cards.
Disconnect non-essential external devices and cables, such as backup devices, external hard disk drives, printers, and scanners.
If you are using a notebook computer, verify that it is not currently in a docking station.
Specify a different computer type when you start your computer.
http://support.microsoft.com/kb/217073
you can see it and more from this url:
http://social.technet.microsoft.com/Forums/windows/en-US/2dc4b5d3-8dc3-4e23-9ef9-56e534aae426/windows-7-installation-stuck-on-setup-is-starting?forum=w7itprogeneral
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors. My window is now "stuck" when I Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors with the presentation on monitor externally hooked up to my computer. My window is now "stuck" when I open Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Desktop Windows Composition and Windows 8.1 Pro x64 [SOLVED]

Hi, I'm Jenn, also new to these forums.
I stumbled upon a problem when switching from Windows 7 x64 to Windows 8.1 Pro x64.
I have the EXACT same setup, same laptop, same hardware, same programs, same configuration, everything.
Windows 7 never did anything like the problem I now have in Win 8.1. Here's the problem;
Whenever I run more than 1 3D application, after 1-5 minutes the screen blinks, and hangs the graphics of one, some or all the programs (randomly). It doesn't hang the actual program (or game), it just stops rendering the graphics -- I can still hear the software's
sound and if I click around, I can hear myself interacting with it.
I have ALL the latest drivers for the computer, motherboard, ALL devices including graphics cards etc. Also ALL Windows Updates installed, nothing more to install.
All of the programs I use is specifically set to use only the nVidia adapter, forcibly through the nVidia Control Panel, so it's not a switching graphics problem because it's a laptop. Also, never was a problem in Windows 7 either.
Here's what I gathered from event viewer right when it happened;
A logon was attempted using explicit credentials.
Subject:
Security ID: SYSTEM
Account Name: PIXIELIGHT$
Account Domain: HYPERUNKNOWN
Logon ID: 0x3E7
Logon GUID: {00000000-0000-0000-0000-000000000000}
Account Whose Credentials Were Used:
Account Name: DWM-1
Account Domain: Window Manager
Logon GUID: {00000000-0000-0000-0000-000000000000}
An account was successfully logged on.
Subject:
Security ID: SYSTEM
Account Name: PIXIELIGHT$
Account Domain: HYPERUNKNOWN
Logon ID: 0x3E7
Logon Type: 2
Impersonation Level: Impersonation
New Logon:
Security ID: Window Manager\DWM-1
Account Name: DWM-1
Account Domain: Window Manager
Logon ID: 0x412659B
Logon GUID: {00000000-0000-0000-0000-000000000000}
Process Information:
Process ID: 0x304
Process Name: C:\Windows\System32\winlogon.exe
Special privileges assigned to new logon.
Subject:
Security ID: Window Manager\DWM-1
Account Name: DWM-1
Account Domain: Window Manager
Logon ID: 0x412659B
Privileges: SeAssignPrimaryTokenPrivilege
SeAuditPrivilege
SeImpersonatePrivilege
An account was logged off.
Subject:
Security ID: Window Manager\DWM-1
Account Name: DWM-1
Account Domain: Window Manager
Logon ID: 0x3E3290A
Logon Type: 2
So as you can see, DWM is logging in and out some account that can be all the way up to DWM-7 from what I've seen so far. It just logs in, sets some parameters and the directly logs out.
This is a ONE-user system, Only my user account is on it, and remote login has been disabled.
In Windows 7, at least DWM could be disabled - not that I ever had to, because it worked with all my stuff, but seeing as DWM is screwing up totally in Win8, I thought I'd just disable the server, but it's nowhere to be found.
Also, it seems Microsoft changed how it works, the system has been redesigned to generate an OK even if it's still on, like this example below:
DwmEnableComposition( DWM_EC_DISABLECOMPOSITION ) does not work on Windows 8, even though it returns S_OK. Confirmation is by calling DwmIsCompositionEnabled(), which shows the former function had no effect.
There's only 1 dwm.exe running.
There's only 1 user logged in (me).
There's only 1 user in the userlist (except for the Administrator account).
Running only 1 of the softwares at a time is not an option for me, either for work or for home use, so how can I fix this?
// Jenn

Hi Jenn,
Please take a look at the following article.
http://msdn.microsoft.com/en-us/library/windows/desktop/hh848042(v=vs.85).aspx
In Windows 8, Desktop Window Manager (DWM) is always ON and cannot be disabled by end users and apps.
I suggest you to download and install the graphic driver from the manufacturer and check if this issue still exist.
As you may have two graphic cards, we could temporally disable one and check if there are compatibility issues.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

After updating my IPad2, my desktop window IOS/ ITunes is not syncing neither updating

After updating my IPad2 last week, my desktop window IOS is not syncing and giving message for updating the IOS 11.1.1 on windows.
But when I am trying to update the ITunes on Windows it is breaking after downloading approx 40 MB.
Downloaded through ITune help but as earlier after downloading approx 32 MB out of 97MB, the process of downloading is getting aborted.
Following files has been down loaded
1. AppleApplicationSupport.msi : = Manually installed after uninstalling the same, as directed by process.
2. AppleMobileDeviceSupport.msi = Manually installed after uninstalling the same, as directed by process.
3. Bounjour.msi = Manually installed after uninstalling the same, as directed by process
4. SetupAdmin.exe = When tried to install, giving ME the message that contact the vendor for installation.
No additional files are downloaded, tried more than 10 times, WHY?
WHAT SHOULD I DO ????

Downloaded through ITune help but as earlier after downloading approx 32 MB out of 97MB, the process of downloading is getting aborted.
Following files has been down loaded
1. AppleApplicationSupport.msi : = Manually installed after uninstalling the same, as directed by process.
2. AppleMobileDeviceSupport.msi = Manually installed after uninstalling the same, as directed by process.
3. Bounjour.msi = Manually installed after uninstalling the same, as directed by process
4. SetupAdmin.exe = When tried to install, giving the message that contact the vendor for installation. #####
No additional files are downloaded, tried more than 10 times, WHY?
Quicktime already updated.

IOS 7, when I plug my phone to my desktop, window xp, I can only see the photos that I took this morning, over 2000 photos in my phone can not be seen right now, can anyone help?

I have just update my iPhone 5 to iOS 7, everythings gone smooth, however, when I plug my phone to my desktop, window xp, I can only see the photos that I took this morning, over 2000 photos in my phone can not be seen right now, can anyone help?

Try to connect in recovery mode to restore, without using the latest backup, explained here:
iOS: Unable to update or restore

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

Windows 7 install stuck on "completing installation"

Hey guys,
Iv been trying to install Windows 7 on my Macbook Pro 13'' mid summer - 2010 from bootcamp. Im running 10.7.3. Everytime I try to install windows It gets stuck on "Completing installation" Iv left it running for hours (4-5 hours) and nothing is changing. I have an image if it helps..
http://4di8ag.blu.livefilestore.com/y1pdjGiUR0cdhWITu8HopcacxhE-s3ccdCNpn3UfVQtc voMTacPL0AHTE1BbV9X15bMk3XiVEPFbeJolxThohNgtQ0K_0nNLLdL/Completing_installation. jpg
Oddly enough, I have had windows 7 installed on this Mac before but then I deleted and now I am looking to get it back (I am using the same disc I had used the previous time). Iv looked around for days for any solutions that have been found but nothing has worked so far. If anyone can help me it be great!

My 2006 is also liist on the uncompatible list. So there is an extra step to reburn the DVD.
Round about way of saying you bought System Builder? rather than retail which costs more but has both.
You might also have been better with pre-SP1 if you could find it. That does get mentioned from some users.
For free there are Windows 8 CP edition (and release candidate in June) to try, those you do burn from ISO to DVD. Try that.
ALL the support docs, faq etc and manual: http://www.apple.com/support/bootcamp
For 2010 iMac there is a driver for ATI. By not telling us what model mac, or whether Lion or not - so you downloaod Apple drivers from BCA

Desktop Window Manager Service on Windows 7 Starter - Any Reason to Leave It Running?

Hello everyone,
-As per title, I'd like to know whether is it better to turn off Desktop Window Manager Session Manager (UxSms) service on Windows 7 Starter - or not. I mean changing the service's default startup type from Automatic to Manual (or Disabled).
-In Windows 7 Starter, the Aero theme and desktop composition are not available at all (not even a basic/partial one), so letting Desktop Window Manager (DWM.exe) to continuously run is useless as it does absolutely nothing. Is my deduction correct?
-All opinions and suggestions are welcomed, thank you very much.
Regards,
-Musafir_86.

Please read the information posted @
http://msdn.microsoft.com/en-us/library/windows/desktop/aa969540%28v=vs.85%29.aspx
Desktop Window Manager
The desktop composition feature, introduced in Windows Vista, fundamentally changed the way applications display pixels on the screen. When desktop composition is enabled, individual windows no longer draw directly to the screen or primary display
device as they did in previous versions of Windows. Instead, their drawing is redirected to off-screen surfaces in video memory, which are then rendered into a desktop image and presented on the display.
Desktop composition is performed by the Desktop Window Manager (DWM). Through desktop composition, DWM enables visual effects on the desktop
as well as various features such as glass window frames, 3-D window transition animations, Windows Flip and Windows Flip3D, and high resolution support.
The Desktop Window Manager runs as a Windows service. It can be enabled and disabled through the Administrative Tools Control Panel item, under Services, as Desktop Window Manager Session Manager.
Many of the DWM features can be controlled or accessed by an application through the DWM APIs. The following documentation describes the features and requirements of the DWM APIs.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Currently my HP desktop (Windows 7) is stuck in a constant loop............

Similar Messages

Maybe you are looking for