Currpted images & video due to bit locker

i just lost all my images, video when i was removing the bitlocker in windows 8 , when i recover the data its just get currpted plz help me to repair all the images..........

Hi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Bit-Locker Repair BDE Image Problem

So Executed Bit-Locker and output it in a image, now I'm doing this for weeks now because there are problems and research and I came in a dead end.
Unfortunately the log is not save :( so I don't have anything to show
but here is the deal around 25% it says error can'r read sector but it still running and still reading some blocks
then after 1 week (Yeah that long) it says 100% with an image file it produce, then when I open image file (Winrar,Explorer,UltraISO) it says it is corrupted. Then a little of my sould just died, after weeks of trying and research this happend :(
What should i do? is there someway I can open the conents of IMG?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Bit Locker Decrypt

Hai
I am using Windows 7 Enterprise 32 bit Os. I have encrypt my external hdd with bit locker. i am not using this hdd after log time. i for got my bit locker password. my system was formated due to some problem. i have the recovery key but it is not working.
kindly give me any idea for unlock encrypted external hard disk.

the only way to recover data will be using a working recovery key.
http://technet.microsoft.com/en-us/library/ee424308(v=ws.10).aspx
MCP/MCSA/MCTS/MCITP

Bit locker security issues (easy to crack) disk encryption?

Bit locker security issues (easy to crack) disk encryption?
Problem 1: When the PC run I think its too easy to get malicious users (with usb pendrive) or spyware to get the encryption key (fast and easy)
youtube.com/watch?v=0npTlOq6q_0
Problem2:not resistant with bruteforce attacks
youtube.com/watch?v=zvaJxnvbGic
Problem 3: not resistant with boot hacking
Im using DriveCrypt plus pack and searched security issues in bit locker.The bit locker allow you the bruteforce/dic attack easy.I think It would be much safer 1. (I think the keys stored somewhere that is easily read) 2. Do not just be enough password
need a password+file combination to decrypt the disk. DriveCrypt plus pack use a file+password combination if you know the password but you wont have the file you can not decrypt the disk (protect with bruteforce attack).On system boot protected bruteforce
attak you can crash the (boot).If the boot system crash you can not decrypt the disk just the password you need the file+password combination plus to decrypt it. I am not a programmer but I see the BitLocker ( easy security catches to crack the disk encryption).Im
tested DriveCrypt and I can not get the key that easy (Problem 1). I have not tested it in greater depth just trying to (catches to crack software encryption).

Where is your question, sir?
If the question were "is it easy to crack", the answer is "no". Your videos make use of several assumptions and ingredients and permissions that a normal attacker does not have.
"Problem 3" is not clear, please describe what scenario you are talking about.

Windows 8: Bit Locker encrypted drive "Not Found" or "Access Denied"

I just upgraded my Windows 7 Ultimate to Windows 8 Pro. C drive is not Bit locker protected, but D drive is. When I go to Computer and double click on D drive, it tells me one of two errors: 1) Application Not Found (more common), or 2) Access is Denied
(less common).
I thought maybe Bit locker wasn't working, but I plugged in my USB stick that is encrypted and had no issues; it asked for the password and opened the folder.
One thing I did earlier was to setup a new local account, give it administrator password, then delete the other account that I had originally used in Win7 (and in installing Win8). Maybe this caused some sort of security problem.
Please help.
Thanks.

I have been using Bitlocker since it was available with Vista Ultimate. I have had the same password to unlock my drive for 5 years. I NEVER keep my recovery key this drive. but just last month i copied all my data to another drive formatted
it to freshen it up and copied it back over. For some reason i kept the recovery key TXT file.... when i tried your method here due to the same exact problem listed the command prompt would not allow me to enter a password in CMD or powershell. Since
i had the recovery key .. THANK GOODNESS it unlocked perfectly and i was able to retrieve my 6 years of Data. So yes, this works and works well. thank You!

Pre-Provisioning Bit Locker in MDT 2012 SP1 while using MBAM 2.5 - No Pin Required

Does anyone have some step by step instructions for Pre-Provisioning Bit Locker. Through task sequences, we are currently able to bit locker the computers but it's the last set of tasks. I would like to Bit Locker the computer while no data is on the
disc so it's faster and then as its imaging, the files are already encrypted.
Currently:
Creates BIOS Password
TPM turned on and enabled (using CCTK)
Remove Password
Registry changes
Installing MBAM 2.5
Removing Registry Entries
Any help would be appreciated!
Thanks
Rick

Bitlocker Pre-Provisioning is available by default on MDT Litetouch...
If you just want to pre-provision the drive without letting MDT LiteTouch enable any protectors (let MBAM do that) then just run the following command after the "FOrmat and PArtition" step in the Task Sequence:
x:\windows\system32\Manage-BDE.exe c: -used
(OR whatever drive letter OS exists on in WinPE)
AS an alternative, I would add a step just before the "ENable Bitlocker (offline)" step in the task sequence:
    BDEInstallSuppress=NO
    isBDE=YES
then after the "Enable Bitlocker (offline)" step in the Task Sequence, I would set the following:
    isBDE=NO
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Firefox not showing correct HP background image/video, but IE (all versions), Chrome and Safari are. How do I fix this ASAP?

Website www.bludot.com is not showing the proper BG image/video on all browsers (Safari, Chrome and all IE versions) but not on Firefox. The code is right, but FF is still pulling old images. The correct image/HTML5 video should be a cake, as displayed on all other browsers.

Firefox 9 is being withheld for Mac users due to unresolved crashing problems.
A test case would be nice and the URL for the website in question, so someone here can experience that problem first hand.
Or, try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

HP Touchsmart IQ775 Crashes When Clicking On A Photo, Image, Video or Movie

HP Touchsmart IQ775
Vista Home Edition
32 bit
Bought it new almost 3 years ago
Wireless Keyboard & Mouse never worked
Geek squad worked on it (4-29-09) can't fix it
Office Depot worked on it (7-?-10) can't fix it
This first started around January of 2009. Every time I click on one of my photos, an image, video or movie, the screen turns pink. There are horizontal and vertical lines all over the screen. Sometimes, immediately after this happens, the screen will go black. Nothing will work and I have to push the power button in order to shut it down. After rebooting, everything will load and work, that is until I click on a photo, image, video or movie.
Does anyone know what might be causing this to happen and if it can be fixed?

Sounds like a video card problem.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Video jerks a bit after dip to white transitions?

I noticed that even before exporting, and viewing in Premiere, that after any dip to white happens, the very next frame of video jerks a bit. Doesnt happen in dissolves.. Happens on either still images or video. Any clues?

We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

Bit locker Mutliple Drives Mutliple OS's

I have a laptop with two hard drive in it. The primary has Windows 7 Enterprise and is a member of the corporate domain. The secondary has Server 2008 R2 and is a member of the lab domain. There is no trust or association between domain.
The laptop does the Windows multi-boot off the primary drive. I want to enable bit locker to secure the drives.
If the two windows environments were exclusively separate, setting up bit locker on each drive independently would be pretty straight forward, but when I'm in one OS, I will frequently need to get files and data from the other drive (and no, making each
drive big enough to hold all it's own data is not an option, plus the synchronization headache). Both drives will need to be bit locked to their respective OS, but the other drive will need to be accessible.
And not to make things too easy, the secondary drive, which i put in an optical drive bay carrier, routinely gets pulled (not while the system is running, of course) out and popped into a USB case to be used as a library transfer drive.
So....
the Windows 7 drive needs to be natively bit locked. and be accessible when running Windows 2008 from the second drive.
the Windows 2008 R2 drive needs to be natively bit locked, and be accessible when running Windows 7 from the first drive, and be accessible when run as a stand-alone USB drive on another system.
I would appreciate any wisdom you can share to make this all work. And please presume that i know next to nothing about installing and running bit locker, because that's pretty much true.
Let me know if you need more information about my configuration.
Thanks

Hi,
"and be accessible when run as a stand-alone USB drive on another system."
Firstly, if you enable bitlocker for one drive, it will be encrypted always until you decrypt it. Thus after you insert it to any system, it need to enter the credential to access it.
And then, if you want to access one drive in another computer, you need to get the shared permission. After you' re granted the sufficient permission, you could access it no matter if it's encrypted. Of course, another computer must be started.
Karen Hu
TechNet Community Support

FORMAT WINDOWS 7(64) BY MISTAKEN NOW HOW I RECOVER ERASED DATA WHICH I HAD LOCKED DRIVE BY BIT LOCKER

i'm using windows 7 (64 bit) but experiment to install mac on my PC (i 5-4 GB ddr 3-500sata sea gate).by mistaken its format my whole hard drive which is 500 GB sea gate sata.after this i'm confused and install windows 8.1 and then again i had install windows
7 (64 bit) now after 2 time partition erased i'm trying to recover my data 50 percent data but which drive i had locked with windows 7 bit locker it cant recover any thing I've remember its password.
any one help me to get back my data from this locked drive ?

RB
If the drive was both formatted and bit locked you cannot recover your data.
Wanikiya and Dyami--Team Zigzag

I LOSE BIT LOCKER PASSWORD

Hi,
I loss bit locker password on Dell i-5 laptop, and I also made fresh installation of windows 8. I also loss backup file of BitLocker Recovery Key.
I contain many personal data i.e family pics, movies, and official data. So please help me that I open my drive and recover my data.
Waiting for favorable Help.

I'm afraid .. Things will not get going well if you have lost recovery key + password..You have to export it while you are turning
bitlocker on.. If the key and the password is lost, no recovery
I suggest you to type the passwords as you can remember.. and try commonly used passwords by you..
"LOST
bitlocker key?? Can you believe that its the time to reinstall your os again??. Painful but this is true.. If you loose the key there is no way,other than formatting and reinstalling os.. That is why you really really need to keep the key in a safe place"
http://www.pcandtablet.com/windows-8-errors-and-crashes/279/i-have-lost-my-windows-8-bitlocker-key-now-i-cant-boot-how-can-i-recover-my-data.html
http://windows.microsoft.com/en-us/windows-8/bitlocker-recovery-keys-faq
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

Problem with recovering data from Bit Locker enabled hard disk with bad sectors

Hi,
I have Lenovo T430 laptop with Windows 7 and Bit Locker enabled hard disk. While working I encountered blue screen error multiple times. After some time, the laptop stopped to boot by itself and started showing error 'A disk read write error has occurred.
Press Ctrl+Alt+Del to restart' message. I tried to connect the hard disk to a different PC as a secondary drive and tried to check the disk to recover the data. The 500 GB disk is showing as unallocated space and I am not sure how to recover the
data from the hard disk. Appreciate your help to recover the data from corrupted hard disk.
I used the Lenovo Diagnostics tools available in BIOS and it showed 48 bad sector errors on the hard disk. I also used Windows 7 CD and tried auto repair but it looks like it didn't do anything.
Thanks in advance!

Hi SenneVL,
Since there are 48 bad sectors on your hard disk, this means the system can not boot any more, the data might not be restored in a normal way, you'd better turn to data restore company for help.
Regards
Wade Liu
TechNet Community Support

Bit Locker on surface pro 3 ssd card

I had a surface pro 3 which I managed to damage. There was data on the ssd that I needed so I have got it out and connected it to my laptop by usb. When I try and use open it, it comes up with bit locker drive encryption so I need a bitlocker recovery
key. help anyone?

Do you have the recovery key ? If you don't have it, I'm sorry to say but you'll loose all the data.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Bit Locker Recovery key lost

hi,
i recently formated my system. i lost my bit locker recovery key.
how to remove bit locker to the drive.
i tried these....
C:\Windows\System32>manage-bde -status J:
BitLocker Drive Encryption: Configuration Tool version 6.1.7600
Copyright (C) Microsoft Corporation. All rights reserved.
Volume J: [Label Unknown]
[Data Volume]
Size: Unknown GB
BitLocker Version: Windows 7
Conversion Status: Unknown
Percentage Encrypted: Unknown%
Encryption Method: AES 128 with Diffuser
Protection Status: Unknown
Lock Status: Locked
Identification Field: Unknown
Automatic Unlock: Disabled
Key Protectors:
Numerical Password
External Key
External Key
C:\Windows\System32>manage-bde -protectors j: -get
BitLocker Drive Encryption: Configuration Tool version 6.1.7600
Copyright (C) Microsoft Corporation. All rights reserved.
Volume J: [Label Unknown]
All Key Protectors
Numerical Password:
ID: {CA7EA469-38CE-4E7E-814D-292A06DF8819}
External Key:
ID: {D70EAC47-DEBB-480A-BFFC-E74479BDDBC1}
External Key File Name:
D70EAC47-DEBB-480A-BFFC-E74479BDDBC1.BEK
External Key:
ID: {2BD85A61-C76F-4433-8DE6-48651047AF6C}
External Key File Name:
2BD85A61-C76F-4433-8DE6-48651047AF6C.BEK
C:\Windows\System32>
how to solve these. help me

Hi，
If you lost recovery key and are unable to access the disk at this moment, then I'm sorry but I have to say that you're lost. If the data in that encrypted drive is very important for you, then you might need a data recovery center to help you.
Yolanda Zhu
TechNet Community Support

Currpted images & video due to bit locker

Similar Messages

Maybe you are looking for