Cursor control in Aperture

The cursor opens metadata on selection of image can I control it?

Are you asking about the Metadata Tooltips?  You can toggle it on and off using the key combination ctrl-T .
If you are asking, how to select what is displayed in the Metadata Tooltips HUD - you can define the various metadata overlays in the drop down menu "Browser & Viewer Metadata Overlays" (the button with icon like a baggage label). select "Edit" from this menu.

Similar Messages

  • Graph Cursor Controls

    On the graph cursor control (the 4 sectioned diamond that appears withthe cursor legend) I'm wondering what the top and bottom diamond do if anything. The left and right ones are simple enough (forward or back one sample) but the top and bottom ones don't seem to do anything from what I can tell. Are they just for decoration?
    Solved!
    Go to Solution.

    Dan,
    I never noticed that before but you're right, in a multi plot graph the up/down diamonds will attach the cursor to a different plot. I never noticed before because I usually change my cursor style so as to not show the horizontal line (just shows the vertical stripe for the cursor).

  • MBA 2013 - cursor control lost with Bluetooth speakers and Acrobat Pro

    When using Acrobat Prof to fill in form (using Typewriter) and have Bluetooth on playing audio speakers the cursor control in Acrobat goes hayware and cannot control cursor  - ok when I close bluetooth and play music via MBA speakers  - any fix except to stop using the Bluetooth and external audio speakers?
    Using i7 ultimate - 8Gb RAM+512 SSD

    It might be an hardware issue of course. But I'd start by completely uninstalling the Symantec software.

  • "Cursor" control.

    I do support for a High Powered executive and philanthropist who love the Blackberry Passport but *hates* the cursor control within email.
    He wants the trackpad-keyboard feature to behave like the trackpad on his beloved old 9800... is there ANY way we can enhance/emulate this experiance ?
    Unfortunately I dont yet have a second one to test with, but I've just ordered one on the grey market (because Australia always Lags behind in this area >.< ).
    But Any Suggestion is greatly appreciated...

    Can you expand on what type of behavior they are looking for specifically? 
    For example, if they are having difficulty selecting text within a email they reading, have them tap and hold a word within the sentence they'd like to select. After a second or two, the word will be selected and if they continue holding their finger the sentence, followed the paragraph will be selected. 
    If they are having difficulty moving the cursor around when composing email, or writing a document, encourage them to double tap the BlackBerry Keyboard which will show the cursor. They can then move their finger across the keyboard to move the circle to the desired location. Another handy tip for fine cursor control is you can move the cursor one character at a time by tapping on the left, right, top, or bottom of the cursor.I hope this helps! 
    To learn more about using the keyboard check out this section of the user guide. 
    Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
    Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

  • Loss of cursor control

    I have an HP Pavilion TouchSmart Sleekbook running Windows 8.
    I have had trouble with cursor control since I took the PC out of the box.  I called HP support and they had me turn my touchpad off.  They also had me reload some drivers.  Nothing has worked.    However, the cursor continued to jump around the screen as I was typing - sometimes putting me at another position in my document and sometimes just going to the desktop and starting up another program.
    It is now much worse.  My cursor is going to the top right corner of the screen - it even shows a small rectangle in the corner.  It is getting very difficult to control the cursor or click on anything on my desktop or in my mail program (Windows Live Mail).  
    Someone Help!  Please!

    Hello again, I do apologize that you are still having issues. I do have another step that we can try. The tool that I would like you to use is called the HP Support Assistant. Please click on the link to get to the download.  http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-110220-1&cc=us&dlc=en&lc=en...
    This tool will run a diagnostic on your computer and let you know if any issues are found and how to fix them.
    Thanks again.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Quicktime corrupted for iPad 2 videos - no hand cursor controls

    I have a 32-bit Dell XPS M1210 laptop and a 64-bit Dell XPS 435 desktop - both of which have had hard drives recently formatted and authentic Win 7 SP1 installed. Not much on either but IE8, Office 2003, HP Printers, Live Mesh, Avast, Google Earth and a few insignificant programs which are not common to both machines. Neither had ever had Quicktime installed until today since I just started rebuilding both. Wanted to watch the iPad 2 videos just posted. Downloaded current Quicktime, installation flawless.
    Quicktime will not run properly on either machine. Same exact corruption problem on both despite 64 vs. 32 bit etc. The videos play, the black centered controls for Pause, volume etc. are there, however I cannot use them. Cursor blinks to a hand for a split second as I hover over controls, but then changes back to Arrow pointer and is not clickable anywhere on video. So, I can watch the video but can't pause, rewind etc. - no controls.
    I have an old Dell XPS-410 Windows Prof. XP SP3 with Quicktime 7.69.80.9 which runs the videos perfectly, pauses controls etc.
    Since the only thing in common with these two machines where Quicktime is corrupted is Win 7, I suspect problem may be centered there? I have tried uninstalling and reinstalling. If I go find OLD quicktime clips online which have the simple gray control bar at the bottom, they do work to pause etc. AFTER the clip finishes downloading.
    Any help would be appreciated.
    Ruth

    The ipad is certainly no replacement for a computer/laptop.
    It is used in conjunction with a laptop/computer. It is simply a big ipod/iphone.
    I would not even consider the ipad for your needs.

  • Cursor controls text scroll

    I really need a code that controls my scrolling text. In
    other words, when my text is scrolling vertically, I want the user
    to be able to place the cursor over the desired text and stop the
    scroll and click on the text. Does anyone have a simple code for
    this or know where a code can be purchased for download?

    I'm not sure I understand. When the user moves the mouse over
    the text, there shouldn't be any scrolling because the mouse would
    no longer be over the scrollbar which controls the movement. Are
    you talking about being able to scroll the text up and down by
    using the mouse and clicking on the text? I think that's what you
    mean. If so, you can use the scrollPane component, drag it to the
    stage with an instance name of scrollPane. Use frame actions:
    scrollPane.contentPath = "text";
    scrollPane.scrollDrag = true;
    scrollPane.hScrollPolicy = "off";
    scrollPane.vScrollPolicy = "off";
    in this example, you will need to create a movie clip that
    contains a text field and name the movie clip "text", right-click
    that symbol in the library and go to linkage, export for AS,
    identifier name of "text". If you get this to work, you may notice
    the cursor will only change to "the hand" when the cursor is
    directly over text (not in between letters). To solve this, you can
    add a layer below the text field (in your "text" movie clip) and
    create a 0% filled shape the same size as your text field.
    Let me know if this is what you are talking about.

  • Cursor Problem in Aperture

    I'm new to Aperture. I suspect I have inadvertently turned on a feature that causes an information window to appear when I move the cursor over an image or Library item. The box appears without clicking on an item. There are times when this could be useful but generally it is distracting. Please help me to turn this feature off.

    Hit the 'T' key.

  • Cursor control problem

    I have a problem controlling my cursor. I've noticed it while in Yahoo email, but it may occur at other times also. It seems to occur when my fingers are on or near the mouse pad. What happens is that, for no apparent reason, the cursor image changes from a perpendicular line to a little rectangle. When this happens, I lose control of the cursor, and it takes off down the page. I can get back control by taking my hands away from the keyboard for a few seconds, but then when I try to do something, it may happen again and again. It is not a huge problem but is very annoying. Any suggestions? Is there some kind of sensitivity adjustment I need to make with the mouse pad? Hey! It just happened while I was typing this post.

    Try disabling tapping.
       Mouse pointer jumps around as you type
    -Jerry

  • Photoshop CS5 - Cursor control

    Hello
    I wonder if it’s possible with Photoshop CS5 (OS: Win7)  to control and navigate the cursor position automatically?
    Situation: I have a layer with many scattered points.
    Wanted: I would like to jump automatically (e. g. by mouse click) to every single point.
    Or is it basically not possible because it is a Graphic-  and *not* a Vector Software.
    Many thanks for any help
    Lars
    PS: I know the feature "Free Transform" (Ctrl + T) but it is not what I am looking for.

    Hello Mylenium
    Many thanks for the answer.
    I have to clarify my question. I wasn’t precise enough, it’s a little bit different.
    Given: I have individual image coordinates for a set of locations.
    Wanted: A possibility to position the cursor sequentially at those image location by the means of an external script or procedure.
    Thanks for any help.
    Lars

  • Does Internet Explorer take over cursor control ?

    Hi all,
    Is it possible that Internet Explorer takes over control of the settings of the cursor in Shockwave dcr files ?
    Since a couple of months I have realized that the cursor in my dcr movies does not change anymore from the default pointer despite being instructed using lingo commands.
    For example:
       on startMovie me
          cursor 280
       end
    should change the cursor into a finger, but it does not.
    I have also tried hiding the cursor (cursor 200) and using my own custom made custom but the default pointer refuses to disappear.
    When using Google Chrome all works well.
    Hower, this is not a proper solution since I cannot control the users choice using Internet Explorer or Google Chrome.
    I would expect a lot of screams from all over the world but the lack of that makes me think there maybe a simple way to avoid this.
    Any comments are very much appriciated.
    Ted

    Hi all,
    Is it possible that Internet Explorer takes over control of the settings of the cursor in Shockwave dcr files ?
    Since a couple of months I have realized that the cursor in my dcr movies does not change anymore from the default pointer despite being instructed using lingo commands.
    For example:
       on startMovie me
          cursor 280
       end
    should change the cursor into a finger, but it does not.
    I have also tried hiding the cursor (cursor 200) and using my own custom made custom but the default pointer refuses to disappear.
    When using Google Chrome all works well.
    Hower, this is not a proper solution since I cannot control the users choice using Internet Explorer or Google Chrome.
    I would expect a lot of screams from all over the world but the lack of that makes me think there maybe a simple way to avoid this.
    Any comments are very much appriciated.
    Ted

  • Cursor control in labview

    Hi,
    I am new to LabVIEW and I just want to control the cursor in my code .Please find the image with this .In that when I 1st run the vi the cursor shoud automatically blink at numeric and when I press "enter" it should move to numeric2 and again when i press "enter" it should move to numeric3.
    Can somebody help me in finding a solution for this?
    Solved!
    Go to Solution.

    The LabVIEW Help contains all of the documentation on all the properties and methods for the various LabVIEW classes. Books on LabVIEW will basically cover the fact that they exist and how they can be used. They won't contain full documentation. There are also examples that ship with LabVIEW that deal with property nodes. Just open the Example Finder (Help -> Find Examples) to find them.
    To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
    If you're looking for a book for LabVIEW, do a search on this forum, as this question has come up many times, and various recommendations have been given.

  • Cursor Control on extension of JPanel

    I have a time-series graphing class that extends JPanel. I want to be able to position the cursor very accurately on the graph and would like to use the arrow keys to 'nudge' the cursor around the graph. I can't find any suitable methods for controlling cursor movement from the Java program. Am I missing something obvious?

    http://forum.java.sun.com/thread.jsp?forum=4&thread=157024
    http://forum.java.sun.com/thread.jsp?forum=5&thread=11550
    http://forum.java.sun.com/thread.jsp?forum=5&thread=8978

  • Delivery Incompletion procedure  - CustomTAB - Cursor control

    We have defined a new tab in delivery at item level and we have some
    custom fields on that new screen.
    This new screen is working ok.
    We also have made one of this new field as part of our incompletion
    procedure. 
    Scenario is like this:
    1. We do not fill in the value for this field.
    2. We check incompletion procedure.
    3. Incompletion procedure has an entry in the log.
    4. We select that item and click on edit data.
    5. Now SAP takes us to this new tab.
    6. But SAP is not positioning the cursor in the right field
    It always positions on the first field on this new tab.
    Looking for some tips here.
    Thanks
    Satya

    Hi,
    From what I understand the Incompletion procedure works fine.
    As far as the position of cursor is concerned,this is the Standard behaviour in most of the SAP screens and the cursor in not always positioned in the exact field where the data needs to be entered.
    This behaviour you could notice irrespective of custom or standard fields.
    Hope this helps.

  • Lost Cursor Control and locks up after putting the iMAC to sleep

    Has anyone an idea why the iMAC locks up and will not accept mouse of tracker controls after putting to sleep for a awhile?

    Yes, just put your computer to sleep whenever you judge it right.
    The three nightly maintenance tasks are not important enough to change your habits,
    they do not affect OS X performance: only disk space.
    And yes, since 10.4.2 they are automatically delayed if your computer was sleeping, but you still have to run them manually
    — all three together once a month is fine —
    if you sometimes shut down or reboot your computer.
    Use this Terminal command
    sudo periodic daily weekly monthly
    or one of the "cache-cleaners" utilities like Cocktail etc.
    HTH
    Axl

Maybe you are looking for