Cursor disappears except near dock (right side) OS 10.6.8, 27" Intel iMac. Started this morning.

This morning my wireless mouse needed battery replacement. After that, the cursor disappears as I move it away from the dock area. If I move over buttons and am lucky, the proper action will take place but I cannot see the cursor. Sort of like playing Battleship game. Blindly move the mouse and hope I hit something. Although this is new this morning, I've had the same problem in the past but it went away. It seems worse or much more annoying this morning.My wired mouse displays the same problem. I had to borrow my wife's laptop to send this problem. The only program open is Safari.  I did a restart hoping to clear the problem but no dice.

I tried the safe boot and it solved the problem. What is a Safe Boot? Where can I learn more about it and when to use it? Will the problem be gone when I do a normal boot? I read elsewhere that someone thought that F10 would solve the problem but it did not for me. I read also that someone upgraded to Lion and still had the problem.
I am still using Rosetta because I use Eudora (I know, a diosaur) and at one time had a suspicion that Eudora is involved but this morning, I had the problem after a restart and Eudora was not active.
I'd really like to know what Safe Boot is intended for. Thanks for the help

Similar Messages

  • When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this?

    When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this?
    For instance I view an apartment ad which has various pictures attached. It says click on the pictures to see an enlarged version. FF opens the page however most of the page is blank and the picture appears to be pushed to the right side of the page and shows as if it has been scrunched agains the right side not showing the whole picture.
    What Can I do to correct this?

    I see that you have increased some font sizes considerably.
    * font.size.fixed.x-western: 20
    * font.size.variable.x-western: 22
    This can effect margins when the website specifies these as em values and cause content to shift.
    If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow pages to choose their own fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
    It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.
    You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    Note that your System Details List shows multiple Flash plugins.
    * Shockwave Flash 16.0 r0
    *Shockwave Flash 12.0 r0
    You can find the installation path of all plugins on the <b>about:plugins</b> page.
    *http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
    You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
    *(32 bit Windows) C:\Windows\System32\Macromed\Flash\
    *(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
    Your System Details list shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
    The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
    You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
    The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    You can delete this user.js and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences

  • I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

    I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • 4MOT/1/40000002:Right side-0 I did run hard ware test and this code came up,, wondering what it is??

    4MOT/1/40000002:Right side-0
    I did run hard ware test and this code came up,,, wondering what it is??

    You have to take the computer to the Apple store as soon as possible.
    Interpretation of these error codes are very difficult.
    There is no published info about these codes from Apple.
    Best.

  • 17" combo drive Intel iMac- is this the right external DVD drive to get?

    Earlier in the week, I bought a refurbished 17” white Intel iMac from the Apple Store. It came without the Superdrive, only the combo drive.
    As this will be a holiday gift for a niece with small kids, I thought being able to burn DVD’s using iDVD would be nice for her. I understand she can attach an external FW DVD drive to do this, and I just want to make sure to give her the right info for buying in case she wants it (she has someone that can put it together for her)-
    DVD Drive: PIONEER DVR-112, from here, $32.90 (from ‘lakewoodlawnman’ in an earlier post) http://www.mwave.com/mwave/viewspec.hmx?scriteria=AA36700&RSKU=AA36700
    Enclosure (recommended in the same post, with instructions for assembly): ANYWARE ME-340U2F USB2.0 & FIREWIRE FOR 3.5" & 5.25" DEVICES EXTERNAL ALUMINUM ENCLOSURE $30.90
    http://www.mwave.com/mwave/skusearch.hmx?SCriteria=AA39270&CartID=done&nextloc=
    Does this look okay? Do you think there will be any problems with it and the iMac 17-inch 1.83GHz Intel Core 2 Duo?
    If you have any other suggestions, I’d appreciate it (these forums rock, btw!)
    Thanks!

    I own 2 Pioneer 110-Ds that work with iDVD and over at ripdifferent.com there are several people that use the drive and enclosure I suggested and it works with idvd for them.
    One of the 110s is in the same enclosure.
    PIONEER DVD-RW DVR-110:
    Firmware Revision: 1.41
    Interconnect: FireWire
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RAM, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No

  • HT201210 All my contacts disappeared...and my phone was sync 'ing' for over 1 1/2hours this morning and nothing was changing...

    my phone is acting up.....have lost contacts for second time in two months, also when I take a picture it goes black and back to 'homescreen'....
    I had my phone hooked to computer this morning sync 'ing' for over 1 1/2hours.......

    If you are using the iphone as designed then you should lose very little or nothing.
    You should be syncing contacts with your computer regularly, so all of your contacts should be on your computer and you can sync them back.
    You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera, most especially before any attempt to update.
    You should be transferring all purchases made on your iphone to your computer: File>Devices>Transfer Purchases
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Dock & arrow disappear on Right side of Desktop? Why?

    Hi all, hoping someone can explain why I get this occuring inconsistantly?
    Really strange and I cant pinpoint it to any activity. Some days all works well & like just now, I find that the dock & pointer compleatly disappear only on the right side of the desktop!
    I can bring back the pointer but it takes a lot of movement to get it to re-appear. It happens with the usb mouse or trackpad.
    The dock never appears. I have to set it to the bottom or the left.
    Support doesnt have a clue. Sometimes it comes before more problems start like system performance hanging/freezing, iPhoto hanging/freezing.
    Dont mind having the dock on the left but it is freaky having the pointer disappear.
    any help would be appreciated,
    frank

    It seems that when the SVHS plug is inserted the PB wants to find an additional monitor. That is where the black hole is.
    thanks all,
    frank

  • Right side of trackpad will not click.

    Over the past couple days I have noticed my trackpad acting up, and have realized that the right half, or at least most of it, does not respond to clicks. Tap to click still works, though I don't usually use this feature, and I can still move the cursor when I drag the right side. It is only the physical click that seems to be broken. What causes this issue, and would this be covered under my extended warranty if I had to get it repaired?

    This just happened to my MacBook Pro. Were you able to take it to Apple for a replacement of the broken parts?

  • Bottom casing of MBP Late 2011 flexing on right side.

    Hello,
      I recently (about 3 weeks ago) purchased a 15" MacBook Pro with the Anti Glare High Resolution Screen, and an upgraded 750GB 7200Rpm HDD from my local Apple Retail Store. So far, I have had nothing but positive things to say, however I have found a little bit of an annoying quirk that I am slightly concerned about.
    I noticed while picking up my MBP that the bottom casing flexes quite a bit on the right side. At first, I just assumed I had put too much pressure on the right side by picking it up with one hand, and it wasnt anything to worry about. However, after 3 weeks of this happening I have noticed it more and more and I decided to see exactly what was going on. So I flipped the MBP upside down and gently applied pressure on various points of the back casing and it seems that there is either something missing on the right side causing the MBP bottom casing to flex, or this is just a design flaw. It doesnt seem likely that its a design flaw because its not flexing at all on the left side.
    I am extremely careful with my MBP as I am with all of my things, especially my MBP considering I spent nearly $3,000.00 on it. Im very anal about keeping things in good order, and just wanted to be sure this is nothing to worry about, and if it is indeed a problem that requires attention, would like to take the MBP into the Genius Bar ASAP. Im completely capable of, however Im not at all interested in opening the thing up or anything to fix something that shouldnt be there in the first place on a computer thats only 3 weeks old, so if this does require attention, I will be expecting a solution to come from Apple.
    This is my first Mac and so far Im very impressed. If I had spent hundreds of dollars on a plastic PC, I wouldnt even bother, but considering this Mac cost me what it did, I didnt expect something like this. Any help is much appreciated. Thank you.

    Thanks for the reply Andrew. I am still a bit concerned considering if left alone, over time, its very possible that this will get worse and could eventually cause some kind of damage as well as accelerated wear on whatever is underneath the casing that is being touched each time the bottom casing flexes as its picked up, and the bottom casing itself. It only flexes on one side, and its very noticeable. Is this the case with all of the MBP's over 13"?

  • It it possible to have info on the left and right sides of iweb templates?

    When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

    Hi
    You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
    In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
    But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • Alphabetical Navigation on right side for Artists/Albums/Songs (Mobile)

    There's a utility that allows you to move through alphabetical lists quickly via a thin alphabetical list on the right side of a list. For long alphabetical lists, this is almost necessary to quickly get to where you're going. Adding this to the right side of the Your Music sections that are alphabetically organized would be incredibly helpful.

    I couldn't find a topic for this so I made my own. I got forwarded here by an admin. I'll just post my mockup here:
    Original postI really want to see fast scrollbars implemented in the android mobile app. It's a small detail, but it makes a huge difference in terms of speed when trying to quickly find a specific artist, album or song inside Your Music. It would also be great to have it in regular playlists when they have alphabetical sorting enabled.
    Examples of it implemented in stock android, KK Dialer and Action Launcher 3                 Mockup of Spotify implementation: 

  • Firefox will not let me click on some tabs and will not let me scroll up on right side of screen

    all of the sudden tonight firefox will not let me "click" to open tabs. also will not let me scroll the screen up on right side of screen. can scroll down, but not up.

    This issue can be caused by the Yahoo! Toolbar extension
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Another populate right side shuttle

    I have read the posts regarding populating the right side of the shuttle and have used a lot of Dkubicek's code from his example. The thing I am not sure about...is this supposed to be populating the right shuttle. Here is what I want to do. User comes to page, empty shuttle. They select userid, then using ajax I populate the states that user is assinged to. Once they select a specific state, I want to populate the right shuttle with all the counties that user is assigned to. I already have the left shuttle populating with ALL the counties in the state using a simple LOV. Right side will not populate. No filter needed. This is what I have built.
    application item
    shuttle_item_value
    application process
    BEGIN
    OWA_UTIL.mime_header ('text/xml', FALSE);
    HTP.p ('Cache-Control: no-cache');
    HTP.p ('Pragma: no-cache');
    OWA_UTIL.http_header_close;
    HTP.prn ('<select>');
    FOR c IN (select DISTINCT t.county_name
    from apexim.hrw_fcm_zip_xref t
    where t.fcm_userid = 'LBROWN'
    and t.oper_state = 'VA')
    LOOP
    HTP.prn ('<option value="' || c.county_name || '">' || c.county_name || '</option>');
    END LOOP;
    HTP.prn ('</select>');
    END;
    javascript
    <script language="JavaScript1.1" type="text/javascript">
    function f_p2_get()
    var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=p2_get',0);
    get.add('P2_MEMBER_ID',html_GetElement('P2_MEMBER_ID').value)
    gReturn = get.get();
    if(gReturn)
    {  html_GetElement('P2_MEMBER_NAME').value = gReturn  }
    else
    {  html_GetElement('P2_MEMBER_NAME').value = 'null'  }
    get = null;
    </script>
    <script>
    NS4 = (document.layers) ? true : false;
    function f_filter_shuttle_item(pThis,pShuttle1,pShuttle2,event)
    var code = 0;
    if (NS4)
    code = event.which;
    else
    code = event.keyCode;
    if (code==13)
    var l_Return = null;
    var l_Select = html_GetElement(pShuttle1);
    var p_array = '';
    var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=filter_shuttle_item',0);
    for (i = 0; i < $x(pShuttle2).length; i++)
         if (p_array == '')
    p_array = $x(pShuttle2).value;
         else
    p_array = p_array + ':' + $x(pShuttle2)[i].value;
    get.add('SHUTTLE_ITEM_VALUE', p_array);
    gReturn = get.get('XML');
    if(gReturn && l_Select){
    var l_Count = gReturn.getElementsByTagName("option").length;
    l_Select.length = 0;
    for(var i=0;i<l_Count;i++){
    var l_Opt_Xml = gReturn.getElementsByTagName("option")[i];
    appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
    l_Opt_Xml.firstChild.nodeValue)
    get = null;
    function appendToSelect(pShuttle1, pValue, pContent) {
    var l_Opt = document.createElement("option");
    l_Opt.value = pValue;
    if(document.all)
    pShuttle1.options.add(l_Opt);
    l_Opt.innerText = pContent;
         else
              l_Opt.appendChild(document.createTextNode(pContent));
         pShuttle1.appendChild(l_Opt);
    </script>
    on select of state drop down
    onChange="f_filter_shuttle_item(this, 'P1010_COUNTY_SHUTTLE_LEFT', 'P1010_COUNTY_SHUTTLE_RIGHT',event);" autocomplete="off"
    Thanks in advance, Justin

    We have accomplished our task

  • How do I get the word Bookmarks to appear on the right side of my bookmarks toolbar? It has disappeared.

    In my Bookmarks toolbar there is a star, an arrow, and a house. There used to be the word "bookmarks" but it disappeared. I want the word "bookmarks" back so that I can click on that. If I right click in the blue area, all I get is Open all in Tabs, etc. There is nothing to say how I get the word bookmarks.

    Firefox has two bookmark buttons with a star in the Customize window.<br />
    One star button has a drop-marker that open the Bookmark menu and may appear on the Navigation Toolbar or on the Bookmarks Toolbar if the menu bar is hidden.<br />
    The other star button without the drop-marker opens the bookmarks in the sidebar (View > Sidebar > Bookmarks).
    *https://support.mozilla.org/kb/How+to+customize+the+toolbar
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
    You can drag the Bookmarks menu button with the drop-marker in the Customize window from the toolbar palette on a toolbar (e.g. Navigation Toolbar or Tab Bar or to the left side of the Bookmarks Menu Items).<br />
    If you do not see the drop-marker then try them both to see which works.
    You only see the Bookmarks Menu button when the Menu bar with the Bookmarks menu is hidden (View > Toolbars or Firefox > Options).<br />
    If the Bookmarks Toolbar is visible then the Bookmarks Menu button is displayed on the Bookmarks Toolbar as part of the Bookmarks Toolbar Items (bookmarks), but you can move it from the right side to the left side of the Bookmarks toolbar if the Customize window is open.<br />
    Otherwise the Bookmarks Menu button will appear on the right hand side of the Navigation Toolbar.

  • Using OS 10-6-8. For no apparent reason, mail refused to open and the icon in the dock changed and the application has disappeared except in iWork. Under Iwork, the message says: "yoou tried to open Mail version 4.5 (1084/1085) in: /Applications/iWork '06

    Using OS 10-6-8. For no apparent reason, mail refused to open, the icon in the dock changed appearance and the application has disappeared except in iWork. Under Iwork, the message says: "you tried to open Mail version 4.5 (1084/1085) in: /Applications/iWork '06. Using OS 10-6-8. It can't be used on thius version of Mac OS X. Try opening the version of Mail located in the Applications folder..."  How do I get back to mail and retrieve my existing messages?

    You should consider downloading the 10.6.8 combo updater and applying it again.
    http://support.apple.com/kb/DL1399
    Pondini has a great page about upgrading.
    http://pondini.org/OSX/Combo.html

Maybe you are looking for

  • Vb6 - How do I Pass a single variable - CR XI

    I have a vb6 application that retrieves data from an ACCESS DB.  I would like to pass a single variable programatically to an .rpt file loaded into form containing a crviewer object.  The ultimate goal is to generate a report based on a single record

  • Error when creating a resource : Failed to initialize the DSDL

    Hi, I've configured a cluster and trying to configure an Oracle mount point. ,ve already created the listerner and server resources for Oracle but having the following error with mount point creation: Command executed: /usr/cluster/bin/clresource cre

  • Prompt for Apple ID of another iphone user appears when purchasing apps

    When I try to purchase an app, the Apple ID that appears & the password asked for in the prompt is for my boyfriend's phone & not mine. We both have iphones (mine is a 4, his a 4s).

  • Setup date and timer on a flash banner

    anoyone please help me to setup the date and time on a flash banner. if it does need action script please provide me with code thanks.

  • ODS Partitioning ?

    Hi - I am looking for guidelines regarding ODS/DSO Partitioning. We are dealing with the LO extractor which brings billing conditions into BW/BI  (We are running BI 7).  We expect very large volumes of data from this extractor.  We plan to implement