Cursor does not automatically disappear

This is a fairly trifling problem, but it annoys me. When I play a video in itunes, my settings are such that it automatically goes to full screen. It used to be that my cursor would automatically disappear as soon as it went into full screen, but since updating to 10.1.2 that is no longer the case and the cursor floats over the video. I can make it disappear easily enough by moving the cursor once the video has gone to full screen and it fades away with the video controls, but this is an annoyance as I use Remote on my iPhone to control the videos from a distance.
Anyone else experience the same thing? I wouldn't bring up something so minor except that it used to work right, and now it doesn't.

Nevermind. iTunes 10.2 FTW, as I'd hoped.

Similar Messages

Tool cursor does not change or does not show up

If you change tools in Photoshop but the cursor does not change (or disappears entirely), this indicates a bug in your video card driver. To fix it, you need to update your video card driver.
Sometimes you can fix it temporarily by turning down the hardware or driver acceleration in the properties panel for the video card.

Chris Cox 11/23/02 4:59pm

Bridge Does Not Automatically Bring Up Photoshop When the Photo is Double-Clicked

I have just purchased CS4 with Bridge for my new MacIntosh. In Bridge for the PC, when I double click a photo it automatically brings up Photoshop. On the Mac version, it gives me an error message saying that part of the application is not loaded. I completely uninstalled the program, and reloaded the application and still get the same message. So in Bridge on the Mac, to get around this, I right click the picture and go to "Open With" and there are two entries: "Open with CS4 (default)" and "Open with CS4." This works if I pick either option. My Windows version only has "Open with CS4 (default)" as the option.
I called Adobe support (in India?) with no solution.
I really like the double click option rather that using the pop-out menu choice. What is wrong with the Mac install, and how can I fix this issue?

Thank you for your help. I updated the software and it "healed" itself.
Best regards,
Gregory T. Stramat
[email protected]
801-978-4735 (Office - Preferred)
801-652-0775 (Mobile)
Omke Oudeman <[email protected]>
01/22/2010 12:52 AM
Please respond to
[email protected]
To
Gregory Stramat <[email protected]>
cc
Subject
Bridge Does Not Automatically Bring Up Photoshop When
the Photo is Double-Clicked
This might mean that you have either 2 installs of CS4 (one on an other
disk?) or you did not use the the default application folder on root level
but have it installed in the user account application folder. Could you
check this?
and go to "Open With" and there are two entries:

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

When I click on a picture, Photoshop Elements 12 does not automatically open.

When I click on a picture, Photoshop Elements 12 does not automatically open (as it did when I used previous versions Photoshop Elements 4 and 9). I can't even right-click (Windows) on the picture and choose Open With and specifiy Photoshop Elements 12. I have called Adobe several times (Case No. 185140584) and they keep saying it has been sent up to senior management and they will call me back with a solution - but to no avail! No return calls and I still can't really use the Product I paid for and downloaded. The only way I can open up a picture to edit it is to open Photoshop Elements 12 and then then click "Open" and then search for the picture on my hard drive (which takes a lot more time! I did not experience this difficulty at all with versions 4 or 9!

Hi,
You failed to say which Windows system you have - I can get the "Open With" to work on my Windows 7 64bit system.
When you try to set up the "Open With", are you setting the correct target program?
It's the green one (not the red one) in the above image.
Once you have selected that program, make sure you set it as default so that a double click will open the photo in the editor.
Good luck
Brian

When I click on a link in an email, it does not automatically open the site page? When I receive an email with a link in it, if I click on the link to open the page, nothing happens. It does not open the internet to that page.

When I click on a link in an email, it does not automatically open the site page?
When I receive an email with a link in it, if I click on the link to open the page, nothing happens. It does not open the internet to that page.

I don't appear to have a toolbar either.

Since upgrading Iphone to iOS 5.1.1 it does not automatically use wifi internet when wifi is available. It has been draining my mobile data. I can only manually change settings with cellular data everytime I get home. Any other solutions?

Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?

Please disregard this question. I'll submit a shorter and more direct question. Thanks.

IPad (3rd generation) does not automatically connect to wi-fi.

iPad (3rd generation) does not automatically connect to wi-fi. It is fully updated to 5.1.1 but you have to manually connect after turning off and back on. I also have an iPad 2 with the same OS but it automatically connects. The wi-fi has no security.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I had to reinstall itunes and now when I plug in my ipod itunes does not automatically come up so I can log in, how do I fix this?

I had to reinstall itunes and now when I plug in my ipod itunes does not automatically open to my library or where I can access the itunes store. What do I do now?

Open iTunes and connect your iPod. Select your iPod in iTunes from the Source list. (I'm assuming this still works, although you didn't indicate if it did or didn't.) Make sure the box is checked to Open iTunes when this device is connected. You should be all set!

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

Perhaps you are loading a template that has a text block already on it.
You might try the blank template option and set that as your go to template in your preferences

My iphone does not automatically switch off the display light when locked. How do I fix this?

I have an iPhone 5 with iOS 8.2 software.
My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
I have tried restarting the phone (using home and lock button), but that did not work.
Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
Thank you x

Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

Adobe Reader does not automatically associate with PDF files in Xp Sp3

I have reinstalled Reader (twice) and it does not automatically associate with PDF files.
How do I fix this problem?
Cheers, JH

The thing is, when I right click a pdf file, and then go to properties, change default program to open with, select browse, I select it in the correct folder, when I click open, it doesnt open and the programs stay blank, so I cant select anything. There is nothing to select. And I have re-installed. But at the end of the install there are no options what file types to associate with. Any way to do it inside Reader?
I have reader 9.2.0. and Win7 up to date. When I'm opening and closing allot of files the whole time, I don't want to do inside reader. Help please?

Artwork does not *automatically* copy to iPod classic

We have 3 ipods in our hosuehold, one classic photo, one 3rd generation photo, and a nano from the latest generation.
All are managed manually.
On the older 2, artwork does not automatically copy across from itunes to the ipod when songs are added. Instead, I have to select each song or album on the itunes library, manually copy the artwork, and then paste it into the iPod. while not crippling, it is certainly annoying.
The nano does not seem to have this problem.
ANybody else have this problem, and is there a way around it?
Of course I have "display artwork" enabled on all ipods, and the software is up to date, on all ipods and on the mac.

I don't manually manage, so my apologies for not being really familiar with it. But my question is, have you noticed that the addition of artwork depends on if the artwork was there from the beginning or not?
In other words, I wonder if when put in a new CD, tracklisting is looked up, you import and artwork gets automatically added. You then drag and drop those tracks to your iPods. Does the artwork show up on the iPod or do you have to do a secondary addition of the artwork?
Versus, if you already had the songs on your iPod, then LATER added artwork to the tracks in itunes, I could see where unless you resynced the songs to the manually managed iPods, that the artwork wouldn't go onto the iPod automatically and would have to be manually added.
I mention this because your Nano is the newest one and I am wondering if the issue is that you have stuff on the older iPods from back before artwork was added to your library. You are now adding artwork, but the songs on the old iPods still have older versions without artwork. The Nano, being brand new, you are probably adding tracks that have since had artwork added and so it maybe seems like it is being automatically added to that iPod and not the others when maybe you just need to re-sync the same tracks to the others?
Again, just some random streams of thought and guessing.
Cheers,
Patrick

Adobe does NOT automatically open when attachments are 'clicked'

Thanks for reading this post. When openning a PDF file attachment within an email or a link from a website, Adobe does not automatically launch to view the documents. In fact, the file conversion screen pops up instead when I select the 'open' tab from the attachment. When I click the 'save' option, the save file type only includes HTLM and ALL Files..... this is odd why PDF is not a save type option. Anyway, any assistance to alievate this problem will be helpful. This is very frustration.... I was also wondering if this could be my Norton 360 that is causing these problems....

Bill was suggesting an alternative approach, making this the default setting in distiller. This is a preference settings in Distiller. I don't have Acrobat 9 on my Windows machine, but this is what is looks like on the Mac:
You want to check the View PDF when using Distiller Check box.

Cursor does not automatically disappear

Similar Messages

Maybe you are looking for