Cursor does not move.

On my IMAC the cursor does not move, but show connected and the click works. just will not move cursor on the screen. I doen the following.
- replaced batteries
- restarted computer
- unplugged computer and restart
- restart while hold command+options+P+R
oh ya, I did notice my picture for my log on changed.
Please help.
thanks

Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Does the mouse move booted from that partition?
Do you have a USB Mouse to try?

Similar Messages

HT4113 My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason

My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Cursor does not move, Cursor does not move

Cursor does not move, can not be controlled by wireless mouse and normal mouse, Are there any solution for this problem? Thank!

in selecting the word, it is very difficult to just place a cursor in the word to make any correction, because it wants to highlight it and it is near impossible to deselect
The standard mouse/text selection action should only select a word when you double-click it. Therefore you should be able to position the cursor within a word by just single-clicking it.
when I do finally get a cursor to appear instead of a highlighted word, the arrow keys don't move the cursor to where I need it
That certainly sounds amiss. I don't think I've ever seen a case where the cursor keys don't move.
So I'm thinking Leopard must have some preference / key preference thing going on?
There is a Keyboard & Mouse preference pane in System Preferences which is clearly the place to start, but off-hand I can't think which options there would cause this kind of setup.

HP wireless mouse H1D34AA cursor does not move

My wireless mouse sometimes does not work - ie the cursor does not move although I can click and the light comes on. Batteries have been changed. This seems to happen intermittently. Any ideas? I have looked at devices and properties etc and removed the dongle and replaced it, nothing seems to work. This mouse is about 6 months old! Thanks

My wireless mouse sometimes does not work - ie the cursor does not move although I can click and the light comes on. Batteries have been changed. This seems to happen intermittently. Any ideas? I have looked at devices and properties etc and removed the dongle and replaced it, nothing seems to work. This mouse is about 6 months old! Thanks

My cursor does not move to the confirmation box after selecting delete

When selecting 'Delete' for an email for instance, the cursor would then move to the confirmation box but with Firefox 4 this does happen now.

Out of curiosity, are you using 'NoScript' or anything of the like?
This occurrence happened to me on the Google page and I figured out that 'NoScript' was blocking Google therefore not allowing the cursor to activate in the search input field. I simply ''allowed'' Google.com and I had no problem thereafter. Perhaps you have a similar problem.

Cursor does not move in my Planning application

Hi, Experts!
I badly need some help with the following issue: I have just created a 9.3.1 classic Planning application and built a simple data entry form in but my up-down-left-right arrow keys do not move my selection from cell to cell in the data form. When I select a writable cell with a mouse and try to enter a data value in it and press Enter, the data value just gets erased and the cursor remains in that same cell. Could anyone help me with what is going on? Thanks!

Are there any javascript errors being produced, you should see in the left hand bottom corner of the browser, I would of thought that be the more likely issue.
I would of suspected something like an implied share but that wipes the cell when you hit save not just when entering data.
Does it happen if you go to via workspace and directly into planning.
If you build a new form with different level0 members do you get the same issue?
Cheers
John
http:

Cursor does not follow in garage band

I click on record and the cursor does not move so I can not follow in what part of the timeline I'm, how can I solve this?

Well, I closed Garage Band and reopen it and it solved the issue, go figure!!

Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

Try these two steps:
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM

My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

Trackpad does not work properly

Cursor does not change during the editing of clips

Hi. I am new to iMovie and am looking for some help. I have imported my clips, put them in my timeline and I want to shorten the clips. According to the movie that is on the Apple web site, when moving my cursor over the line separating my clips, my cursor is to 'change' allowing me to shorten the clip. Well, my cursor does not change. Is there a setting that needs to be corrected. Thanks for any help that can be offered.

Hi konrad - the View Menu DOES have a 'Show Clip Volume Levels" IF you are using iMovie HD!
But according to your Profile you have iMovie 4. Volume control in that version is at the bottom beneath the Timeline Audio tracks.
Hope this helps clear up your confusion.
Better to use the iMovie 4 forum in your case!:-)

End Routine Issue - It does not move data from E_T_RESULT to RESULT_PACKAGE

Hi,
I am facing an issue with end routine. I have gone through previous posts on, how to write end routine and all.I wrote the end routine accordingly.
Here is my scenario,
I have 0CUST_SALES master data , which has all the Sales Org, Distribution Channel and Division, Sold to Party, Sales Grp and Sales Dist.
I am getting , Sold to party and Distribution channel at the field routine.
I am using, Sold to Party and Dist Channel and Division = '01'- whatever i populated using a field routine and trying to get the Sales Org, Sales Grp and Sales Dist at the end routine.
It looks like, all the code that i wrote seems correct but it does not populate any values into RESULT_PACKAGE.
Here is the code I wote at the end routine. I am not sure, whats wrong in it. I used, this link to write this routine :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/203eb778-461d-2c10-60b3-8a94ee91cbfc&overridelayout=true
Global Declaration----
DATA : BEGIN OF IT_CUST_SALES,
    DIV TYPE /bi0/pcust_sales-DIVISION,
    DIST_CH TYPE /bi0/pcust_sales-DISTR_CHAN,
    SALES_ORG TYPE /bi0/pcust_sales-SALESORG,
    CUST_SAL TYPE /bi0/pcust_sales-CUST_SALES,
    SALESDIST TYPE /bi0/pcust_sales-SALES_DIST,
    SALESGRP TYPE /bi0/pcust_sales-SALES_GRP,
    END OF IT_CUST_SALES.
DATA: T_CUST_SALES LIKE TABLE OF IT_CUST_SALES.
Start of End Routine
   SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from
    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE
    where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
End End Routine
Data comes into E_T_RESULT but it does not move to RESULT_PACKAGE. Any inputs will be helpful.
Regards,
Kumar

Hi Hegde,
Declaration is same , its like this.
   datA: e_s_result type tys_TG_1.
    data: e_t_result type tyt_TG_1.
I don't know, when i inserted this code in this post, initially it was OK but once i post i also saw , its not that read friendly.
FYI, i am trying to put the code again, lets see if it works.
SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE   where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
Regards,
Kumar

Itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

Go to the Edit -> Preferences-> Playback
In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
Thanks,
John

Item does not move from Workflow Inbox to Work Item Executed by me

Hi experts,
We have implemented workflow inbox for invoice payment. After archive document in OAWD, we will do posting through Workflow inbox. After posting, the item should go to 'work item executed by me' folder. But the problem is the work item is still in the workflow inbox. What should we do? Pls help. This is urgent. Correct answer will be rewarded, TQVM in advanced.
Rgds,
Nanie

Hi Arianie,
First check the status of your WORK ITEM ID. You can check it in SBWP or in SWI6 transaction.
If your work Item ID still remains in the SAP Inbox & does not move into outbox i.e. "work Item Executed by me" then it may happened that your workflow is not triggered after users/responsible agents action completion. You can check the graphical status in SWI6 transaction itself.
Also check whether your Work Item ID's status is not "ERROR" . If it is "ERROR" then you need to resume the work item ID (Whose status is Error) to start/recall the workflow.
Thanks
Pravin

HT1553 my macbook pro is frozen and does not move from loading screen. Can you help?

my macbook pro is frozen and does not move from loading screen. Can you help?

Call Apple Support and schedule a appointment for a hardware check, or take it into a Apple Store.
We can't help you with that problem.
Good Luck

Playing back music on Itunes stays on 0.00 and counter does not move

Hi When I try to play any music in Itunes the counter stays at zero 0.00 and does not move along. I found this thread which best describes my problem so appears to affect quite a few others: http://discussions.apple.com/thread.jspa?threadID=1205504&start=30&tstart=0 however I have tried all the possible solutions discussed on there without success. My operating system is XP Pro. This has happened several times in the past and quite frustrating (only a reboot normally fixes it but there has to be a reason why this keeps happening). Music and video plays fine on other media players (same as users in the thread attached). My wife's Itunes also does it and she is running Vista on her laptop. By the way I have the latest Itunes updates/versions etc and have also tried restoring to earlier backups - all without success. It was playing fine the other day with exactly the same updates just not today. Thank you for any help.

Same here, only it will sync, but extremely slow!

Cursor does not move.

Similar Messages

Maybe you are looking for