Cursor focus bug(?) in v10.5

Didn't notice this until 10.5. It makes it hard to switch to iTunes and use space bar to pause/play.
1. Play something in iTunes. Note the cursor focus is in the songlist area of iTunes so that you can use spacebar to pause/play.
2. Hide the app (via the dock or by cmd-tab and hitting 'h').
3. Switch back to iTunes.
4. Try using spacebar to pause/play. You can't. The focus is in the entire iTunes window, so you need to click into the songlist area to use spacebar.
I am **pretty** sure this did not use to be the case as it is a common behavior for me and it's not working anymore.
Anyone else notice this?
-Matt
Message was edited by: Matthew Grayson. Spelling correction.

OK, I will post more pictures.
So, I try to customize the standard waveform graph in LV, but right-clicking on the plot and select Advanced-> Customize or Edit->Customize Control form the menu. Go into Customize mode.
In 8.2 and before, you used to be able to just right-click on the decoration for the plot legend and replace it with something from the clipboard, etc.
In 8.5, this functionality has been removed.
However, you can select the item and go to Edit->Customize Control (I show it here for the cursor legend, as it works). You get a new control window.
(Continued in next post)
Message Edited by Matthew Kelton on 11-06-2007 03:23 PM
Attachments:
cursors customize.png ‏15 KB
customize dec 8.2.png ‏12 KB
customize dec 8.5.png ‏11 KB

Similar Messages

Bug: No Cursor Focus with Instant Preview Message Replies

When you receive an Instant Preview Message and click on this notification (not shortcut reply but click on the notification itself for bbm or text messages) this brings you into the Hub to reply to that message.
The cursor focus is now in the reply field blinking however the typing focus is not here. You must explicitly click in the reply field to re-set the cursor focus. Now you can type to reply.
Is this a known bug? Is there a fix?
Blackberry Q10
OS Version: 10.2.0.1803

cor-el, Thank you for the quick response. However, I am not a techie by any stretch and am totally disabled. Your answer basically made no sense to me, sorry. I also have something called Session Manager, in this case irrelevant as my FF page never stayed up long enough for me to do anything even to click on Restore.
I have in the meantime, simply reverted back to an installation of 3.6.8 and everything is working fine right now. I hope others will find benefit from your response as it is way too deep for me to venture.
Thank you again for your response.

Cursor focus during a PPR event

Hi,
I have two messageTextInput columns (lets say text1 and text2) inside a table region. When a user enters a value in text1 and do a tab out, I fire a PPR event and set some attributes in my VO. The problem is: after it is done, the cursor focus does not move to text2, even though the user did a tab out after entering a value in text1. Cursor focus returns again to text1.
Also, I do not want to do a page forward, so that processRequest is called again. That would be a costly operation for us. Please let me know if there is a way to regain cursor focus to the right textInput bean.
Note: This is IE 7.
Thanks. Much appreciate your inputs.
Raja

Raja see this thread, i have replied this some time back:
Re: How to set focus on a textinput/poplist using PPR
--Mukul

When typing in a website after opening in a tab, the cursor focuses to the address bar and makes logging to things difficult, how do I change this?

As stated in the question on any website I open regardless of whether it is a new tab or just a new destination, the cursor focuses on the address bar and makes logging in to sites very infuriating. Any help is much appreciated.

Thanks for the help, it didn't help with this particular problem. I figured it out though, I had an issue with the AVG safe search. I had to just delete the file in the program files x86.

HELP!!!...Firefox 4...STOP cursor focus from going to Bing search box????

I just installed Firefox 4....Now every time I open firefox the cursor will automatically jump to the bing search box.
I want it to start and stay inside the address bar.
A long time ago I had this same problem and searched online and found a solution. I don't remember exactly what it was, but it was something like going into about:config and switching some settings inside there. That fixed the issue and ever time I would open Firefox my cursor would START and STAY in the address bar.
Can anyone help me figure this out again? I don't want any add ons or extensions, I want it back to the way it was this morning before I upgraded to version 4.
Thanks in advance!

***SOLVED***
I finally found the solution...
I have a Windows 7 64bit laptop, but this should work for Vista users as well...possibly XP users too, if you switch a couple of the folders around, if you're an advanced user you shouldn't have a problem....
add this code to your firefox '''''"prefs.js"''''' file, you can find pref.js here, just follow the steps...
C:\Users\<you>\AppData\Roaming\Mozilla\Firefox\Profiles\f9cunhcx.default\prefs.js]]
Now add this line to the bottom of the list. Keep in mind for changes to take effect you must have Firefox closed, otherwise it'll just over write any changes you attempt to make and nothing new will happen.
'''user_pref("capability.policy.default.HTMLInputElement.focus", "noAccess");'''
After adding the above line, save the pref.js file and reopen Firefox, you'll now notice your cursor won't be in the search box. You'll have to manually put the cursor to where you want it to be. I have my home page set to www.msn.com it would drive me nuts that as soon as I open the page my cursor focus would go to the bing search bar. It wouldn't be so bad if it went to the google search bar in the top right hand corner...but anyways I hope this helps someone else out. If it does please leave a comment on your experience for the next person.
Thanks,
James

HTML DB Cursor Focus

Hi everybody,
I work with HTML DB 1.6. My question is about Cursor Focus. In my page Cursor Focus is SET TO: First item on page
My first item is a Select list, my second item is an other Select list and my third item is a Text area. My cursor is focus on my third item; WHY ?. I want on my first one.
Another question, is it possible to move our cursor to the next item after entering data in an item or to choose to don't have cursor on some item?
Thanks. Bye.

Thank you Mr. Horowitz,
But, I just have to write tabindex=''1'' for example or I have to add a tag.
Thanks. Bye.

[svn:fx-trunk] 13172: Fix SDK-24776 which is a ColorPicker focus bug in the Arcade theme.

Revision: 13172
Revision: 13172
Author:   [email protected]
Date:     2009-12-22 16:14:56 -0800 (Tue, 22 Dec 2009)
Log Message:
Fix SDK-24776 which is a ColorPicker focus bug in the Arcade theme.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24776
Modified Paths:
    flex/sdk/trunk/samples/themes/arcade/src/defaults.css
    flex/sdk/trunk/samples/themes/graphite/src/defaults.css

error dateField not selecion date 27/11/2002 ?
This is bug flex 3 ?
thanks

Cursor Focus in PLSQL portlets

Hi,
Is there a way to set the cursor focus in a form created in a PLSQL portlet without using javascript?
Thanks

Hi,
You cannot do it using plsql. You will have to use javascript.
Thanks,
Sharmila

Cursor Focus issue

Hello Everyone,
I have added a remember my username checkbox with login box.
If somebody clicks the checkbox it remembers the username.
However, the cursor remains with the first item ie. username.
I want to change the cursor focus to password field if username
field is not null.
Can anybody help me in setting the tabindex property for password field.
I want to set the tabindex in my plsql procedure.
Thank You,
Parveen

You can do that in your page header Javascript code as follows:
function first_item(){
if (document.getElementById("PX_USERNAME") )
document.getElementById("PX_USERNAME").focus();
else
document.getElementById("PX_PASSWORD").focus();
}where PX_USERNAME and PX_PASSWORD are your username/pwd fields...and then in your page HTML body code put :
onLoad=first_item();Thanks,
Sam

Cursor focus to error field.

In APEX 3.0, when I use Validations, Type Function Returning Error Text:
If :P1_ITEM is null then
return 'Must enter a value';
end if;
Everything is fine, except the cursor goes to the first field in the page. How do I make the cursor go to the field that contains the error (back to the field that did the validation)? Thanks in advance.

Hi Shirley
Sorry I did not see this post but I did reply to your question you post about inserting caps.
if you create another page item say P1_PAGE_FOCUS then as part of your validation you set its value.
If :P1_ITEM is null then
:P1_PAGE_FOCUS := 'P1_ITEM';
return 'Must enter a value';
end if;
add this bit of javascript to your header
function setFocus(FocusItem)
try {
    var oFocus = document.getElementById(FocusItem);
    document.getElementById(oFocus.value).focus();
catch(err) {
    null;
}You should also that your pages Cursor Focus is not set to first page item. Then add the following to your HTML Body attribute
onLoad ="setFocus('P1_PAGE_FOCUS');"
This should then set the page item that you want to set focus to the invalid page item.

WebDynpro Popup Cursor Focus Problem

Hello WebDynpro experts,
since CE7.1 (SP6) I am observing that an input field refuses to take the cursor focus after calling a popup window for a lookup.
Only after some seconds the cursor appears again. Clicking the right mousebutton in this input field the cursor appears at once.
It only happens on Internet Explorer. It does not happen in Firefox(but again when applying IE engine in Firefox).
In some environments (different company, different IE settings) it works fine.
This did not happen in NW04S/7.0.
Does anyone know the reason, a fix or a workaround.
Has it to do with JavaScript-settings?
Thanks a lot for Your answers,
Erik

Hi
[Follow this|requestFocus() doesn't work anymore in NW CE 7.1;
Best Regards
Satish Kumar

Updated - Cursor focus in HTML text field in JEditorPane

The last poster just save my bacon - so an update for others: Adding a JEditorPane to a JWindow will result in all the <INPUT type=text> form elements to be non focusable. Switching to JFrame does make things work again - but I would love to have a JWindow again (I don't want the title bar for a kiosk type operation).
thanks!
brian
Here is the guy I do thank!!!
** PROBLEM
How do I make cursor focus go into an HTML text field in a JEditorPane?
My test appplication is a JPanel containing a JEditorPane and nothing else. The content type is text/html. The HTML text contains a form and an INPUT TYPE=TEXT tag. I use setEditable(false) because I do not want the user to edit the paragraph text, only to type in the text field.
The text field does not get cursor focus. Tab does nothing. The user can click with the mouse to place focus in the text field, so the field is capable of receiving focus. I guess the field is in a View that stops it participating in the component hierarchy.
Is there a way to make this work?
** SOLUTION! - ok, if you don't use JWindow
It turns out that setEditable(false) is not enough. The JEditorPane still gets in the way of the focus cycle. It also needs setFocusCycleRoot(false) and setFocusable(false) to prevent it from participating in focus. Focus on the text field then works normally.
fp

I don't want the title bar for a kiosk type operation).You could use an undecorated frame. Read the API for more info.
Or, maybe this posting will help:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=675445

Remove cursor focus

I have a page with a bunch of checkboxes..
(enough that the page has to be scrolled)
at the bottom of all of the check boxes is a text field..
when the page is run the cursor jumps to the text field at the bottom of the page..
how do I keep it from setting the cursor focus to the text field so the page opens at the top instead auto scrolling to the bottom..

In the page properties look for: Cursor Focus. What is it set to?
If it's set to the first item and the page is still scrolling to the bottom, try changing the cursor focus to "Do Not Focus Cursor" and then write a JS function to set the cursor to your first checkbox.
Martin

Cursor Focus

Hi,
I have a testedit UI field in my view with data and edit button also there down of the textedit.now when i clicked edit button the cursor should be displayed in the textedit filed.Can anybody give me idea regarding this.
With Regards,
Prasad

hello prasad,
To set the cursor focus on the text edit on click of the button edit, do the following
1. bind the UI element Text Edit to one context attribute (suppose it is a value attribute bound
directly to context root node named
source )
2. create an action for the click event of the Button EDIT (suppose its name is EDIT)
    This will create an eventhandler OnActionEdit() in the implementation.
3. Now write the code in the event handler as shown below
    //@@begin javadoc:onActionEDIT(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionEDIT(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionEDIT(ServerEvent)
    IWDAttributeInfo attrinfo = wdContext.getNodeInfo().getAttribute(IPrivateTEST_appView.IContextElement.SOURCE);
    wdThis.wdGetAPI().requestFocus(wdContext.currentContextElement(),attrinfo);
    //@@end
4. deploy and run
done
Hope it is clear
Sarbjeet Singh

Switching between Acrobat DC / XI window and another application - cursor selection bug (video and test files attached)

Hi,
When I have Acrobat XI or DC open along side InDesign (or other programs like Acrobat or Word), I run into a bug where upon switching from InDesign to Acrobat, the mouse cursor automatically selects a bunch of text in the Acrobat PDF with a spinning beach ball, and I have to click around multiple times to release it from whatever text it has selected. It is annoyance I noticed in a few versions of Acrobat now, and I had hoped the bug would be fixed in DC. The only way to prevent this from happening is to click anywhere else on the Acrobat window (eg the menu bar or the side tools panel, but not the PDF itself).
Video describing the problem: https://imgur.com/dXurXcB
Note that no clicking is taking place when switching windows from InDesign to Acrobat - the text in the Acrobat window is being selected automatically by the bug.
If you watch the video carefully, you will also notice that the Acrobat window does not look like it is taking focus during the selection bug - it only takes the focus after clicking around multiple times.
Test documents used to record the video:
http://s000.tinyupload.com/?file_id=14619964329420357364
InDesign CC File
http://s000.tinyupload.com/?file_id=18294837115907237178
PDF File
Computer:
Model Name: MacBook Air 2013
Model Identifier: MacBookAir6,2
Processor Name: Intel Core i7
Processor Speed: 1.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
OS: Yosemite 10.10.1

Thanks for the reply. I think the issue is just confined to Mac machines + Adobe products (this issue doesn't occur when I switch from Word Preview 2016, or Office 2011). I can confirm this issue occurs on more than one Mac as well.
Here is a slightly larger GIF if the first was too hard to make out
https://i.imgur.com/CNKnkC0.gif
It's almost as if the text manipulation / selection from InDesign is carrying over to the Acrobat window, interrupting the normal focus it should get on first click...
Edit: It just occurred with Spotify - Switched from Spotify to Acrobat, with a scanned image PDF. The rectangular selection tool tries to grab a region of the image several times before focus returns to the Acrobat window. It also just happened after manipulating images and text in Word 2016 Preview and Word 2011.

Cursor focus bug(?) in v10.5

Similar Messages

Maybe you are looking for