Cursor freezes on 17" iMac G5 1.9Ghz

The Cursor keeps freezing on an iMac G5 1.9 Ghz...all the software is updated....

Hi strings, and welcome to the discussions.
But can you give us any more information?
What are you doing when it happens? What software
are you usually using? Do you have an Apple keyboard
and mouse? When did it first start happening? Does it
"unfreeze" eventually? How much RAM do you have in
your computer? What other devices do you have
connected to the computer, etc etc
The more information you can provide about the
situation the easier it will be to help you. On the
basis of what you have told us so far the problem
could be caused by any of a hundred and one things.
Cheers
Rod
Hello Rod: thanks for getting back to me.
I could be doing anything, It happens When i'm just moving the mouse across the screen to open a folder, or down to the dock to open an app.It can happen during start up,.or after the machine is on for more then 2 hrs. On that machine I am up to date on all SW updates, Including iTunes and Quicktime,..
It is connected to an Apple wired Kybd and Mouse, and the only external Drive is a 250mb Zip.
there is an NAS attached, and shared with two other macs(an intel mini and a G4 eMac). I have run Every Untility i could think of, and do not have this problem on the Mini with the same OS installed, or on theeMac with Panther running....and this JUST began happening tuesday night at 9pm. Thanks in advance for any assistance...
Bill(Strings)

Similar Messages

  • My trackpad cursor freezes on my imac

    Since downloading Maverick the trackpad cursor freezes periodically.  Does anyone know how to fix it?

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    Trying running this program and then copy and paste the output in a reply. Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • Mouse cursor freezing up

    I am a new iMAC user after many years on a PC. Quite often my mouse cursor freezes up on the screen and my only remedy seems to be to shut down and reboot. This can't be right! There must be a better solution. Can anyone out there assist me?

    I've had the exact same problem ever since I upgraded to Leopard, and the successive updates, including the very latest 10.5.3, have not solved it! I am so disappointed. This is a severe bug. I used to be able to fix it by logging in and out, but today I had to shutdown and restart because my keyboard logout command was not getting through. I can't be sure about this, but it seems as though the problem occurs if I happen to be still be moving the mouse cursor and the logout sequence is engaged. It's as if moving the mouse cursor at this critical time is causing the system to have to keep track of it AT THE SAME TIME the system is trying to kill my user processes. The mouse cursor process ends up dead alright, all the way to the login screen! (Those who are familiar with how UNIX manages processes will understand what I'm talking about.) Please Apple, fix this. Please. This didn't use to happen in Tiger, so how does something like this get broken?

  • G570 USB mouse cursor freezing constantly

    The problem will be explained lower but let me tell you how this was.
    So I've had this problem like 1,5 years ago, after I bought the laptop. So I bought a cheap mouse for it back then, and I noticed that the laptop had problems with the USB mouse, fine, I thought it was the poor mouse, so I bought another cheap one, and it worked fine. Then I bought a gamepad, and again, this problem.
    Today I bought a gaming mouse, and the problem re-appeared. I've been searching through the internet all day long.
    Basically, the mouse cursor freezes constantly, also with that "plugged-unplugged" sound, but the touchpad works.
    I've been looking all around, tried the mouse on another laptop and it works fine.
    I've tried:
    - Starting the laptop in safe mode.
    - Uninstalling/reinstalling the realtek USB reader or w/e its name is.
    - The device manager trick (I think you know what I'm talking about)
    - Been changing the OS many times after I bought the laptop, that problem persisted with the gamepad.
    - Tried different ports around the laptop.
    None of them helped. BUT, I saw that actually it hangs when the CPU is throttling. I've changed my power plan to energy saver and the problem went away. I've changed the maximum/minimum CPU power, the problem went away.
    But the frequency sets constantly at 800 MHz. What can I do to keep it at 2200 MHz (i3-2330M clock speed) and also keep the mouse working well?

    Hey Barrett_killz,
      Welcome to the forums
    I would suggest you trying out a different USB mouse and see if that helps
    Cant suggest anything else as you have already uninstalled and installed the Drivers
    keep me posted
    Lets make 2015 the year of the #DO
    Did I or someone help you today? Press the star on the left to thank them with a Kudo!

  • 10.6.8 cursor freeze

    Hi,
    I clean installed a family member's Macbook Pro 3,1 with 10.6.8 and noticed the cursor will frequently freeze for between 5 to 30 seconds. The cursor freeze was evident prior to installing any 3rd party apps and does not seem to effect any other process happening at the same time. Trashing a file, ejecting a mounted drive or performing a Spotlight search (and some other random tasks) will result in the cursor temporarily not responding to trackpad movement. No information has been written to the logs to suggest a process error. I have reapplied the combo 10.6.8, repaired permissions and also checked the SMART status of the internal HD. Has anyone else noticed this after installing 10.6.8? Thanks

    I have the same problem, and it's very annoying ! It doesn't happen with a "Logitech" Mouse, only with my "Bluestork".
    I have to unplug and replug the USB dongle to unfreeze it.  This problem isn't due to my session, it also happen on a new 10.6 installation on another hard drive. It happens as I connect it on a USB hub or directly to a computer's USB port.
    http://appletoolbox.com/2010/04/mac-os-x-10-6-3-mousekeyboard-freezes-continue-m ore-fixes/
    I have done every step described in this link (except installing 10.6.2) but none solved my problem.
    I don't know what to do,
    Akari.

  • 2011 Mac Mini, 10.8.3, SSD - System CPU at constant 10%, frequent 0.5 sec cursor freezes

    Hi.  I have a Mid-2011 Mac Mini with 8GB of RAM. I have an SSD installed in it as the primary drive, along with another internal 2TB drive and an external USB 2TB drive for media. This machine is mostly used as a media server and player.  It's been running Mountain Lion since I bought it (refurb) last year.  I upgraded to 10.8.3 as soon as that came out, and was running for a while without any problems. This evening, though, I started to notice some problems.
    The main issue is that the CPU (well, one core) seems to be constantly under load. Under Activity Monitor I'm watching the system load (but not user load) hover between about 8% and 12%, all of the time.  But looking at the program list, I don't see anything taking up more than about 2% of CPU, and that is taken up by Activity Monitor itself.
    The annoying way that this manifests itself in the UI is that if I'm just randomly moving the cursor around in a circle, I can watch it periodically hang and freeze for about half of a second every 3-4 seconds or so. Meanwhile, everything else on the system also seems to freeze up for about half a second at the same time, which makes watching Netflix extremely irritating. (With Netflix the sound plays as normal, but the video freezes briefly every few seconds - I verified this in both Firefox and Chrome so I doubt it's a browser thing.)
    I've already tried some troubleshooting steps myself. (None of this has worked yet.)
    I saw a lot of messages in console about "mdworker deny mach-lookup com.apple.ls.boxd", which googling around for led me to this page; per the instructions there I booted into safe mode, waited a bit and rebooted, and now I don't see those messages any more. (I didn't mess with the sandbox.sb file, about which, really? Apple implemented this in Scheme or something?)  Just to be on the safe side, though, I disabled Spotlight indexing with sudo mdutil -a -i off.
    I opened Disk Util and ran a verify on all three disks, no errors.  I found one or two permissions that needed repairing on the startup SSD and repaired them.  The problem persisted.  I also cleared out my caches with Maintenance while I was at it.
    As a side note, even when I rebooted in safe mode, I was still seeing the same behavior (periodic half-second mouse freezes, system CPU averaging a constant 10% or so in Activity Monitor).
    I also spent some time reading this other thread which looked like it had some very useful advice (unlike that poster, though, my Spotlight processes aren't crashing).  So I went ahead and followed Linc Davis's first set of instructions in that thread.  Here's what I've got for steps 1 and 2.
    1. Activity monitor
    Highest-CPU process is Activity Monitor at about 1-2% CPU
    CPU: User 1%, system ~10%, idle ~90%
    System memory: Page outs 0, swap used 0 bytes
    Disk activity: Reads in/sec 0, Writes out/sec 0 (these infrequently spike up to about 40 or 50 max)
    2. System log
    I put up a gist for this here.  It's my last 50 messages or so, probably some are coming from the most recent reboot.  I can see the "IOHIDSystem cursor update overdue. Resending" messages which I presume are linked to my cursor freezes, but nothing else looks obviously suspicious to me.  The stuff about "menucracker" is down to MenuMeters; I uninstalled it and rebooted at one point just to check, but it didn't seem to make a difference so I reinstalled it.
    As far as kexts go, the only one I had that wasn't Apple was SoundFlower. I actually need that one, I use it to stream files from Plex, but I went ahead and uninstalled it anyways, and it didn't make a difference.  My launchd lists start up sickbeard, sabnzbd, and plex, but I've manually quit all of those and the problem persists, so I highly douby any of them are to blame.
    Any advice greatly appreciated.  Is there a better way that I can see what exactly is causing the high system CPU load, like can I list processes by number of kernel calls or something?  I did try top and ps but I didn't see anything obviously different from Activity Monitor in their output.

    Nope, I don't have a "/Users/charon/Library/Mobile Documents" directory, let alone anything underneath it. Is that like an iCloud thing or something?  I tend to avoid the Apple-supplied services when I can (I don't use iTunes either unless I can help it).
    As an update, as of about two days later this problem seems to have solved itself. Possibly sleeping and waking did something to it (though that seems unlikely given how many times I rebooted), or else there was just some long-*** kernel process that finally worked itself out.  But my system CPU is back down to normal and the cursor freezes are gone.
    ??? it is a mystery! ???

  • New condition baffling mouse cursor freezes if I put it on a flat surface even with ac plugged in

    Hi all
    I am now really stumped.  Here is the situation
     ac adaptor plugged in mouse freezes
    UNTIL I plug in WIRED and working lan cable.
    if I unplug the lan cable from the router the mouse cursor freezes.
    NOW that would be strange enough BUT if I unplug the LAN cable the mouse freezes again as expected UNTIL I lift up the S10 ( doesn't matter how I do it) the mouse starts to work again!!!! with the ac plugged in. So now you are all thinking it's the ac socket !!! nope thought about that and it's got nothing to do with it.   The mouse freezes the moment I put the computer down on a flat surface or even near it.
    It's as if the bloody thing is effected by proximity to a mass ? anyone got any ideas

    Hi majorkong,
    Additional ideas are possible shorts internal to the system.  I definitely have a reason to believe that the unit has a hardware problem.  This is either through the touchpad, touchpad cable, or on the motherboard.
    As I see here you have already communicated with us before.  Here is your previous thread with us.
    Have a good night.
    Don

  • 13 in 2011 MacBook screen flickering and fading to white, cursor freezes

    The screen on my MacBook fades in and out, then eventually fades to white and the cursor freezes. It gets worse if you change the angle of the screen.

    These directions are from this Apple document:
    http://support.apple.com/kb/ht1379
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Cursor freezes after site change Mavericks

    My cursor freezes for various amounts of time since downloading Mavericks. Any body else as I'm going to talk to Apple support under Apple care and they tell me no one else has this problem.

    I had the same problem. I have found a work around - sort of. I have unchecked the option to "Allow Bluetooth devices to wake this computer" (System Preferences / Bluetooth / Advanced). I no longer have the problem. Having to wake the computer another way (I have a USB wireless mouse so no problem for me) and waiting a second or two for the bluetooth devices to connect is less annoying than continually losing trackpad connection. I hope that helps you too.

  • Cursor freezes on startup mac mini

    Cursor freezes at upper left corner of screen.  Using my new Mac Mini. The one with the least amount of storage and most recent Mac OS. Occurs when using third party usb keyboard or Microsoft wireless keyboard and Logitech wireless trackball.  Same problem when using OEM Mac wireless mouse. Haven't tried it yet using OEM Mac wireless keyboard.  Have to buy one.

    Which version of iMovie are you trying to run?
    I just updated to latest iMovie 2.1.2 on my iPad Mini with iOS 8.3 and I am in, all video/photos show up. Perhaps a troublesome video clip downloaded from internet?

  • My cursor freezes about once or twice a day.

    When the cursor freezes, the caps lock key lights up green. When I am working on a document this is a huge problem, as I often lose content.  Also, the keyboard has started to do strange things like repeating a key many times or deleting whole lines if i press delete.  Any one with similar problem? Any advice much appreciated

    Hi Raymon
    Maybe unselecting "ignore accidental trackpad input" (or something similar, my mac os is not english) in the keyboard-preferences helps. When you have that turned on, the cursor will not react while you are typing. Maybe your mouse is incompatible with that function or something.
    Bye
    Xavier

  • Cursor freezes completely each time with mac os x 10.6.8

    Hello, mac friends,
    I have a Macbook Pro with 8Gb and upgraded from 10.6.3 to 10.6.8 recently.
    All was well for some but since one week, the cursor freezes when I use either Safari or Mozilla, and and basically the whole system jams.
    I cannot do force quit. Unplugging my mouse (logitech) or just using the trackpad works and I simply need to do a forced close down with the
    on button in the right upper corner.
    I have tried a PRAM reset, a Disk Utility with repair disk permissions and disk repair, and using Disk Utility through the Installer Disk but nothing
    seems to help. I have upgraded both Safari and Mozilla, but still the same issue crops up.
    What is wisdom here? Downgrade from 10.6.8 to a earlier version? Upgrade to LION? or set up a new user or admin account? I have seen various
    threads on the internet but never a definite answer and someone content that his/her problem with the cursor freeze was resolved.
    Please let me know - I think quite a number of other mac users have the same issue.
    Thank you,
    Saab96

    I have a similar problem with my early 2009 Macbook Pro 10.6.8 and have been working on it for several weeks. Something is cuasing my mouse (USB or Logitech Wireless) to stop functioning normally. At first I thought it only happened after the Mac was asleep but it just happened again while I was using it.
    I've cleaned house as far as possible potentially offending programs including getting rid of all browsers except safari.
    Repaired Disk Permissions, Veryifeid the Hard Disk which had some bad sectors after 3.5 years of use. So I replaced the drive with a Seagate 750GB drive. Did a Time Machine recovery from a point in time prior to the problem ever occuring.
    Relentless searched through the Console logs each time it happens but it does not seem to point to one thing.
    Crash Reporter does not even pick it up and create a report.
    I ran Memtest for hours two times and can find nothing wrong with the memory.
    Reset the SMC
    Reset the PRAM which if I understand it correctly also resets the NVRAM?
    Yesterday I did a fresh install of Snow Leopard using the Archive and Install function to create a new system wothout nuking the drive and my USer/networksettings etc.
    Ran updates on the system to get it back to 10.6.8
    And it happened again. I clicked on a window and the "Select" function just hung so no mater where I moved my mouse it kept selected everything. It would not close windows or perform any mouse like functions.
    The command-quit function worked this time and I can always open & run the Force Quit window and shutdown. It'sl like the machine is doing everything except mouse functions.
    The "crash" does seem to affect my Parallels 8 virtual machine as I am able to quit W7 and shut down parallels normally.
    I have over 2GB of free RAM out of the 4GB installed
    Temperature Monitors seem normal.
    I'm really starting to think its hardware....
    I"m going to hard wipe the drive and do a clean install of Snow Leopard next and not install any third party programs whatsoever. But before I waste any more time on this if anyone has any ideas on this I would appreciate hearing them. Apple support has been giving me ideas and veyr helpful as usual but this isn't fixed and I can't live with it.
    This machine never crashed. But since the last week in August it does this constantly at least a couple time a day.
    Thank you for any assistance.

  • HT203176 cursor freezes on mac osx 10.8.5

    cursor freezes on mac osx 10.8.5 have to re-launch finder to regain control, using wireless mouse.
    This happens at various times but more noticable after wakeup.
    Any ideas?

    When you next have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • After Software Update, USB Power Issues and Cursor Freezing

    I have a 1.8 dual g5. After the latest software update I experienced some seriously quirky usb power fluctuations, a card reader frying and sudden, but temporary, mouse cursor freezing. I did some research and went for a clean install from original Leopard disc and downloaded the combo update 10.5.2 from apple support. I then restarted in "safe mode" and ran the 10.5.2 update, restarted, zapped the pram, restarted to disc warrior to repair permissions and clean the drive... then restarted again. Same deal: Spinning lines on gray 1-2 minute. black (sometimes white) screen 3-5 minutes. blue screen 1-2 minutes. log in.
    Tried cocktail, disc utility permission repair and removing log-in applications/drivers. Same deal... ****** computing. I feel like it's 1999 all over again.
    Cost me three full days work so far under a very tight deadline and a lot of stress..... Apple is 100% responsible for this messy release and needs to address it quickly.

    My problem is similar to the others already posted, but quite different too. Perhaps someone else has had this strange issue occur. I attach my nike+ receiver and set my workout as usual, and then I come to selecting playlists. I select my playlist (which is titled running) and my work out starts. HOWEVER, the playlist that I selected plays music from another playlist such as sarah mclachlan (which is not in my running playlist). I have tried everything that you guys already posted short of doing a restore. Any thoughts? I posted this same question on the nikeplus.com web forum but no one has replied. I can find no sequence to the playlist malfunction. For example say I choose to play my sarah mclachlan playlist it will play my irish playlist instead and so forth. Make sense? HELP!!!!!

  • What could this be? Cursor freezes for about a second

    Sometimes, the cursor freezes for about a second. It does not move on the screen. I checked the log files, but I cannot seem to find any trace of it.
    Has anyone else seen this? It does not happen a lot, it happens occasionally.
    I have seen it happen in Safari the most, but that is the app that I use the most anyway.

    Thanks for suggesting we turn off the "accidental input" option. It's a shame we have to live with the alternative - accidental input - which happens to me fairly frequently when I'm typing. But the mouse freezing was driving me insane.
    I found that it was very easy to reproduce. Simple go to a webpage, scroll down the page with the down arrow key, so the mouse disappears on-screen, then try to use the trackpage to move the mouse - it doesn't appear immediately. For me, it takes 1-3 seconds - which feels like forever.

Maybe you are looking for

  • Windows xp won't boot after cloning hard drive to a bigger drive

    I have a HP Pavilion Dv4170us laptop added some new upgrades to it.. max RAM 2GB... a new battery... and I bought a 160GB samsung IDE drive to replace the origional 100GB drive...Using EZ Gig II software and usb drive adapter I successfuly cloned the

  • Graphics Card Not Working In My HP Pavilion g4 1314tx Laptop

    Hi, My Hp Pavilion G4 1314 tx Laptop is not starting up .When I asked hp store people they said graphics card has to be replaced.My graphics card is                           AMD Radeon HD 7450M (1 GB DDR3 dedicated) I'm in India but not able to find

  • Macbook Air or Macbook Pro

    Yes, I know you hear this question a million times a day but I think it's different per person. Here's some information about me: Firstly, I am comparing the 13" MBA (128gb) model with the 13" MBP model but I did have a question regarding the 11" MBA

  • How to monitor Database Users who ever is doing bulk transactions

    Hi All, We need to produce a report (daily basis ) which will provide User and Bulk Transaction details in Database to track the system. How to state a script to perform this monitoring ? RDBMS: 10.2.0.5.0 (64 bit) OS: RHEL-5.2 Thanks, Tusar

  • Payment Processing/Purchase Fields Limit

    I am attempting to use the "restaurant" template to create an order form for our products. Using drop down menues so our customer's can order the desired amounts. The Payments Processing/Purchase Fields has reached some sort of limit and will not con