Cursor issue when writing emails

Hello
When I write emails the cursor changes to selection cursor rather than arrow and I can not seem to get the arrow back.
However, I am able to send the emails clicking with the selection cursor rather than the arrow.
I hope someone can help me with this issue. Thanks

This bug is still in Illustrator CS5
And it depends on aplication main window size!
Especialy if you have two monitors, document window is outside the main window and main application window is not maximized.
If you have application window smaller, than document window (in height), then where document height is still bellow application window height,
there you can see cursor. If you are editing text in position which is over the main application height, there is not cursor visible.
So, my solution is:
Resize main application window to the maximum size.
(And maybe you will need restart Illustrator)
(UPDATE: It depends on window width too! )

Similar Messages

How do you set the left hand margin when writing emails. Some characters disappear off of the left side of the page because the margin is so close to the edge

When writing emails the left hand margin is so close to the edge of the page that some characters disappear from view on the left hand of the page. How can I set the left hand margin to not be so close to the left edge of the page?

Oy. You beat your head for hours and finally concede to asking for help, only to solve it two minutes later. Here's the answer.
In the inspector, on the Layout tab, there's a checkbox that reads, "Show Thumbnail Track".
UNCHECK that box and the gutter goes away.

Is there a way to turn off the iPad spell check feature when writing emails?

Is there a way to turn off the iPad spell check feature when writing emails?

Yes - but you will turn it off everywhere. Settings>General>Keyboard>Check Spelling>Off.

Cursor disappears when writing text?

I have a frustrating problem in CS3 that when writing a block of text, either with text tool or area text tool, that the cursor disappears. I need to see its new position after using the space bar or tab: ready to input the next piece of text.
It seems to be flashing some of the time if I click into the middle of the text block, but disappears where I want to continue it at the bottom of the text block?

This bug is still in Illustrator CS5
And it depends on aplication main window size!
Especialy if you have two monitors, document window is outside the main window and main application window is not maximized.
If you have application window smaller, than document window (in height), then where document height is still bellow application window height,
there you can see cursor. If you are editing text in position which is over the main application height, there is not cursor visible.
So, my solution is:
Resize main application window to the maximum size.
(And maybe you will need restart Illustrator)
(UPDATE: It depends on window width too! )

Slow address lookup when writing emails

When I begin a new email, and begin to type in the name or email address of the person I'm writing to, the lookup/auto-populate is painfully slow. Its so slow in fact, that I can usually type out the entire address before it returns the suggestion list.
I know it used to be faster, but I don't remember when it got this bad. I've looked all over the forums and Google, but can't seem to find anyone else that has this issue.
I have two email accounts on the iPhone- Exchange &MobileMess. I don't populate anything from iTunes.

rlevs wrote:
I have two email accounts on the iPhone- Exchange &MobileMess. I don't populate anything from iTunes.
Okay, but have you ever plugged the phone into iTunes and synced it ?
I ask as a common cause of problems is an overabundance of the memory type "Other" which occurs due to bad data etc building up over time. Normally I would say to plug it into iTunes and see how much the Device has in the Other category and seeing whether it needs a restart.
But if its never been synced before I would be wary of advising this.

MacBook Air: Contacts being picked up when writing emails

I have loaded my Contacts (lots of them, it's business) into my MacBook Air. When I go to write an email, however, it does not pick up the Contact. I end up having to find the email address (the search function is hopeless so I have to use the Blackberry) and type it in rather than the name. It worked fine when I had the Contacts loaded at the Apple Store, but then stopped working at some point. Can anybody advise?
thanks
Dan

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

SSAS -- Having the issues when writing the queries

Hi All,
Need help on SSAS Queries ..
1. We have a cube with ROLAP Storage and dimension is having the MOLAP Storage.
We are facing the data discrepancy issues .. So , we are writing the corresponding sql queries at semantic side to test data .....
But when we write the queries . the data is not matcing and we tace teh query , it is issuing the distinct for some of the feilds ...
Please help on which basis they are taking the distinct ..
Thanks,
Mahesh Alam

Hi Mahesh,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Charlie Liao
TechNet Community Support

Re-open attachment when writing email

Hi Experts,
I am using the write email (IC_EMAIL) functionality in WebIC. When I add an attachment is comes up correctly on the right, but when I want to open it, nothing happens. I don't think this is a SAP problem, more like a IE problem. I am using IE8.
When I move the mouse over the attachment (which appears as a link), I can see the following hyperlink in the status bar:
file:///D:/users/........pdf
So the hyperlink appears to be OK, the mouse pointer turns to hand but still nothing happens.
Any ideas?
Regards,
Csongor

This is a commonsense question...why would someone send email from the form with out attaching the form? and if they like to send email just with text they can do so from their email client, why do they need to use form? I do not think there is such option to do so....the default attachment format option is fdf format. Other format options are XML and PDF.
Good Luck with that.

When writing email, links I send are not click-able why? how can I fix this?

want to add click-able links to emails I use Hotmail and when using Firefox these do not show as clickable as they do say in MSN How do I fix this?
for instance : http://havahartpetrescue.petfinder.com

Set it in Safari's Preferences/General

Strange issue when composing emails

On line 1 i write a sentance.
On line 2 i write a sentance.
If I put the blinker at the front of line 2 and press delete.... line 2 appears directly above line 1. (results shown below)
Before:
Hi Mum
Hope you had a nice day.
AFTER
Hope you had a nice day.
Hi Mum,
Anyone havig this issue????

On line 1 i write a sentance.
On line 2 i write a sentance.
If I put the blinker at the front of line 2 and press delete.... line 2 appears directly above line 1. (results shown below)
Before:
Hi Mum
Hope you had a nice day.
AFTER
Hope you had a nice day.
Hi Mum,
Anyone havig this issue????

Need a desktop email client specifically for WRITING email.

I prefer to read my email through my web browser at gmail.com and don't want to deal with managing duplicate mail with my desktop client. However, when writing email in a web browser, adding files and images is a real pain. I need drag-drop functionality to speed up my work flow. Can I configure Thunderbird (preferably) or Apple Mail to write email using my gmail account, but not clutter the inbox with any mail at all?

Hi
Looking at your wishes I'm wondering if you have considered an IMAP account?
With IMAP the emails on your computer are synchronised with those that are on the server. Each email has metadata recording things like "read" or "unread" status and this metadata is kept sync'd between the computer and server.
Also, of course the location of the email in your mailbox/folder system is kept sync'd as well.
So, all in all, that which is on the server is the same as that which is on your computer.
I have used IMAP for some time and I would not return to using a POP account personally.
I think it would be good for you to try out an IMAP account for it is easier to see how it works that it is to describe. In practice it is very simple and intuitive.
.Mac includes a very slick IMAP account indeed, another you might be interested in is FastMail. .Mac does a free trial period so it might be easiest for you to look at that. If the other things with .Mac don't interest you then I can recommend FastMail which does cost a bit of money annually but it is very well worth it.

Mail is not giving from information when sending emails

Having issues when sending email to recipients, it does notgive my info. in the from section.

Nope, i can send individual emails ; however, my information(from:) is not being shown. So individuals recieve email from me without my information, and could be considered as spam.

Windows 7 displays error message when exiting +cursor issue

Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Doug

function(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?

So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)?

Issue when creating a new email account on Adobe BC

Hi,
I got a big issue when I tried to create a new email account for my site, which is a very email account to me, and I had been using that email address for over 10 years.
Here is the issue, When I created this email account, Adobe BC keep telling me that account has been created (please see the screen shots below), but I did not see this email account on the BC's backend email account list at all. I tried to create that email for over dozen times, it just won't work!
Please anyone who can help me on this, or anyone from Adobe BC tech support team, please contact with me. Becasue I having hard time finding your tech support telephone numeber.
Thank You.

Hello designonly.
You are saying that you have been using that email address for over 10 years. So you are trying to make an address which already somewhere exists?
That brings me to another thing - is the DNS setup made well? In order to make email address work, you should edit the A-Name & NS. Sometime even more settings (depend on domain registrar).
designonly, is this your first email setup?

Cursor issue when writing emails

Similar Messages

Maybe you are looking for