Cursor keys do not properly change to next/previous image

Since a few days, one of my two Lightroom-computers shows a permanent, quite annoying bug, regarding the curser left/right key:
It happens in loupe view:
When I press the cursor-right key, Lightroom doesn't change to the next image
Instead, it doesn't stop changing to the next image before it reaches the end of the folder .
Correspondingly with cursor-left, which takes me always to the first image in of the folder...
Browsing in loupe view is nearly impossible, just the mousewheel still allows to change to the next/previous image.
This happens for all sets, catalogues, folders, etc. If I have selection, then it takes me to the first/last image of the selection, nothing in between possible.
Any advice, what went wrong with my system? Everything was smooth a few weeks ago, and everything works fine on my other computer, which should just behave the same...
Thanks for any hints!
Harald

After hours of testing, I identified the reason:
The problem was raised by the service "skdaemon.exe".
It's meant to be a keyboard enhancing utility, which was preinstalled (und later updated) on this computer.
After deactivation (from autostart), LR works fine again, and I didn't notice any missing keyboard functions yet.
Maybe, this helps someone else in getting around that problem, and thanks for the support.
Harald

Similar Messages

  • Scrolling of dinamani site in firefox using key board not properly configured?

    scrolling of dinamani site in firefox using key board not properly configured?
    by using down arrow i am unable to scroll
    instead it goes to end of page
    previously ie. about 4-5 months back this problem was not there

    You may have switched on caret browsing.
    * http://kb.mozillazine.org/accessibility.browsewithcaret
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    * http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • How can I get cursor keys to work properly in Excel under Mavericks?

    I recently upgraded from Snow Leopard to Mavericks on a 24" iMac, with  wired Apple USB keyboard and mouse. The cursor keys do not work properly in Excel 2011 - instead of navigating through the spreadsheet, they move the spreadsheet up, down, or sideways within the active window. Booting in safe mode did not help. All software is up to date. The cursor keys work as they should in other apps. I have also tried this with peripherals disconnected but that made no difference. Suggestions, anyone?

    Need more information. The drop down calendars are a custom JavaScript that has been developed by a number of different people and use many different methods so without which one and how you implemented it ion the form it hard to determine what is going on.

  • Buttons to change to next/previous state not working

    Hi guys
    Apologies if you consider this an acrobat issue but I thought it was more indesign.
    I am trying to add in a slide show to my interactive pdf and I just can't get it to work.
    I've followed a couple of tutorials to the letter and when I preview in indesign the buttons work fine and the picture changes the next/previous state.  When I export to SWF, again, it works beautifully.  But as soon as I export to interactive PDF, the buttons dont work.
    I can only think this is either something in the export settings or something with my acrobat not letting it be interactive.
    I use CS5 and Acrobat X pro.
    Any ideas?  Literally nothing happens when I click on the buttons in the PDF.
    Thank you

    MSO….multi state object.
    Unsupported in PDF. Never has been.
    The only possible workaround is to create it in a different file, export as SWF and place the SWF into a PDF.
    Bob

  • Internet Explorer's forward/backward for next/previous image

    In addition to right/left arrow to move to next/previous image I would like LR team to add this keyboard shortcut:
    Use Internet Explorer's forward for next image.
    Use Internet Explorer's backward for previous image.
    Here is the reason. I have ViewSonic mouse with five buttons. Extra two buttons I use for forward/backward command within Internet Explorer. It would be nice if the same two extra buttons I could use in LR.
    At the moment I have the two extra buttons programmed to function as right/left arrow. That allows me to use them to go next/previous image in LR. In order to use them as a forward/backward command within IE I have to press Alt key.
    It would be nice if LR team could add IE forward/backward to the list of keyboard shortcuts.
    Best regards,
    Ivan Kmecko

    This is a function of the mouse driver...you should be able to configure settings based on the current application so LR and IE can use the same keys but it'll mean different things in each app.

  • My cursor keys will not scroll my Facebook TimeLine, it jumps from top to bottom, works fine in Chrome browser.

    I am using Linux Mint ver. 16, and the Chrome browser works OK with keybd cursor keys in Gmail, Facebook, etc. but when I switch to your FireFox browser, I find the cursor keys are erratic and the up/down keys jump from the top to the bottom of Facebook time line, with no stopping or scrolling. I have tested this on a desktop PC and a laptop PC, and I get the same result, so I know it is not the hardware. So I will just stop using your Firefox browser until I can get a fix.
    Wayne

    You may have switched on caret browsing.
    *http://kb.mozillazine.org/accessibility.browsewithcaret
    You can toggle caret browsing on/off by pressing F7 (Mac: fn + F7).
    *Edit > Preferences > Advanced > General > Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    Note that this is an accessibility feature of Firefox.
    *http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • Windows 8 error "product key does not match any of the Windows images available for installation"

    Hi Experts
    My HP Pavilion laptop came with window 8. I made the USB recovery for windows 8 using hp recovery manager. My windows was corrupted, while I was trying to install windows 7 in dual boot.
    I used above USB recovery to restore factory default. But every time it is giving me error "HP Recovery Manager Failed error code = 0xefffff08"
    Then I downloaded the OEM ISO mage for windows 8 and tried to do the clean install but now installation process is giving me error "The product key entered does not match any of the Windows images available for installation. Enter a different product key" 
    Please help me. To whom I have to contact?

    Hi ghost-rider,
    Thank you for your query, I will do my best to assist you.
    I understand you tried to do a recovery and you received this error  "oxefffff08".
    First I would suggest you run a hardware diagnostics. Testing for Hardware Failures (Windows 8)
    If no hardware failures are located, you have ruled that possibility out.
    Here is a link to Troubleshooting HP System Recovery Problems (Windows 8) that may help.
    If you are still having an issue doing a recovery, I suggest contacting HP support and explain the issue you are having with doing a recovery. They may have another option available for you.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region  Technical Support Sitemap
    The clean install from an OEM image is looking for the product code as it does not match the one that came with the computer, You would need a new code.
    I hope this has helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How do I change default Next/Previous buttons?

    When I automatically create multiple Submenus using the 'Create Chapter Index' command, Encore generates Next and Previous buttons.
    These are rather plain - they seem to be the same style regardless of the style of menu selected - and I'd like to set another default style.
    Can someone tell me how to do this, please?
    Many thanks
    John

    You can build the next/previous buttons any way you like. Just put them on the menu and then specify them as "Next" or "Previous" under the type field in the properties box. There's more information about this in the help files under chapter menu automation.

  • Next/previous image in imageslider

    Hi there. I can't seem to get the next/previous buttons working. I get the error "
    1061: Call to a possibly undefined method addEventListener through a reference with static type function
    What's going wrong?
    This is the code:
    import fl.containers.UILoader;
    //Declaring Variables
    var menu:MovieClip = menuMc;
    // var prevBtn:MovieClip = menuMc.prevBtnMc;
    // var nextBtn:MovieClip = menuMc.nextBtnMc;
    var playBtn:MovieClip =  menuMc.playBtnMc;
    var stopBtn:MovieClip =  menuMc.stopBtnMc;
    var nextBtn:MovieClip =  menuMc.nextBtnMc;
    var prevBtn:MovieClip =  menuMc.prevBtnMc;
    var imgFolder:String = "imgs/"
    var imgArray:Array = new Array("1.jpg","2.jpg","3.jpg","4.jpg","5.jpg","6.jpg","7.jpg","8.jpg");
    var imgLoader:UILoader = imgLoader;
    var imgCntr:uint = 0;
    var imgCntrTotal:uint = imgArray.length;
    var imgRequest:URLRequest = new URLRequest(imgFolder + imgArray[imgCntr]);
    var imgCntrTxt:TextField = menu.imgCntrTxtTf;
    var slideShowTimer:Timer = new Timer (5000,0);
    var imgVisible:Boolean = true;
    //Init
    playBtn.stop();
    stopBtn.stop();
    nextBtn.stop();
    prevBtn.stop();
    imgLoader.load(imgRequest);
    imgCntrTxt.text = (imgCntr).toString() + "/" + imgArray.length.toString();
    //Events
    //Play
    playBtn.addEventListener(MouseEvent.MOUSE_DOWN,playBtnDown);
    playBtn.addEventListener(MouseEvent.MOUSE_OVER,playBtnOver);
    playBtn.addEventListener(MouseEvent.MOUSE_OUT,playBtnOut);
    //Stop
    stopBtn.addEventListener(MouseEvent.MOUSE_DOWN,stopBtnDown);
    stopBtn.addEventListener(MouseEvent.MOUSE_OVER,stopBtnOver);
    stopBtn.addEventListener(MouseEvent.MOUSE_OUT,stopBtnOut);
    //Next
    nextBtn.addEventListener(MouseEvent.MOUSE_DOWN,nextBtnDown);
    nextBtn.addEventListener(MouseEvent.MOUSE_OVER,nextBtnOver);
    nextBtn.addEventListener(MouseEvent.MOUSE_OUT,nextBtnOut);
    //Previous
    prevBtn.addEventListener(MouseEvent.MOUSE_DOWN,prevBtnDown);
    prevBtn.addEventListener(MouseEvent.MOUSE_OVER,prevBtnOver);
    prevBtn.addEventListener(MouseEvent.MOUSE_OUT,prevBtnOut);
    //Timer
    slideShowTimer.addEventListener(TimerEvent.TIMER,timePassed);
    //EventHandlers
    //Play
    function playBtnOver(e:MouseEvent){
              playBtn.gotoAndStop(2);
    function playBtnOut(e:MouseEvent){
              playBtn.gotoAndStop(1);
    function playBtnDown(e:MouseEvent){
              //Slideshow / Timer starten
              slideShowTimer.start();
    //Stop
    function stopBtnOver(e:MouseEvent){
              stopBtn.gotoAndStop(2);
    function stopBtnOut(e:MouseEvent){
              stopBtn.gotoAndStop(1);
    function stopBtnDown(e:MouseEvent){
              // Slideshow / Timer Stoppen
              slideShowTimer.stop();
    //Next
    function nextBtnOver(e:MouseEvent){
              nextBtn.gotoAndStop(2);
    function nextBtnOut(e:MouseEvent){
              nextBtn.gotoAndStop(1);
    function nextBtnDown(e:MouseEvent){
              nextImg.play();
    //Previous
    function prevBtnOver(e:MouseEvent){
              prevBtn.gotoAndStop(2);
    function prevBtnOut(e:MouseEvent){
              prevBtn.gotoAndStop(1);
    function prevBtnDown(e:MouseEvent){
              prevBtn.play();
    //SlideShowTimer
    function timePassed(e:TimerEvent){
              imgLoader.addEventListener(Event.ENTER_FRAME,fadeImg);
    //Functions
    function fadeImg(e:Event){
              if(imgVisible == true){
                        imgLoader.alpha = imgLoader.alpha - 0.05;
                        if(imgLoader.alpha <= 0){
                                  imgVisible = false;
                                  nextImg();
              if(imgVisible == false){
                        imgLoader.alpha = imgLoader.alpha + 0.05;
                        if(imgLoader.alpha >= 1){
                                  imgVisible = true;
                                  imgLoader.removeEventListener(Event.ENTER_FRAME,fadeImg);
    function nextImg(){
              if(imgCntr < imgCntrTotal){
                        imgCntr++; //staat gelijk aan imgCntr + 1
              }else{
                        imgCntr = 0;
                        imgRequest = new URLRequest(imgFolder + imgArray[imgCntr]);
                        imgLoader.load(imgRequest);
                        imgCntrTxt.text = imgCntr.toString() + "/" + imgCntrTotal.toString();
    function prevImg(){
              if(imgCntr == 0)
                        imgCntr = imgArray.length -1;
                        imgCntr--;
                        imgRequest = new URLRequest (imgFolder + imgArray [imgCntr]);
                        imgLoader.load(imgRequest);
                        imgCntrTxt.text = imgCntr.toString() + "/" + imgCntrTotal.toString() ;
    function tfF():void{
        imgCntrTxt.text = (imgCntr+1) + "/" + (imgCntrTotal);
    Help much appreciated

    says this now about
    Scene 1, Layer 'As', Frame 1, Line 103
    1180: Call to a possibly undefined method prevBtn.
    related code:
    var prevBtn:MovieClip =  menuMc.prevBtnMc;
    //Previous
    prevBtn.addEventListener(MouseEvent.MOUSE_DOWN,prevBtnDown);
    prevBtn.addEventListener(MouseEvent.MOUSE_OVER,prevBtnOver);
    prevBtn.addEventListener(MouseEvent.MOUSE_OUT,prevBtnOut);
    //Previous
    function prevBtnOver(e:MouseEvent){
              prevBtn.gotoAndStop(2);
    function prevBtnOut(e:MouseEvent){
              prevBtn.gotoAndStop(1);
    function prevBtnDown(e:MouseEvent){
              prevBtn();
    function prevImg(){
              if(imgCntr == 0)
                        imgCntr = imgArray.length -1;
                        imgCntr--;
                        imgRequest = new URLRequest (imgFolder + imgArray [imgCntr]);
                        imgLoader.load(imgRequest);
                        imgCntrTxt.text = imgCntr.toString() + "/" + imgCntrTotal.toString() ;

  • Primary Key could not be changed without dropping the index

    I want to change the primary key in the "alter table modus". I don't see any INDEX. I refresh the DATA and get the following error:
    ORA-01785: ORDER BY-Angabe muss Positionsnummer von Ausdruck der SELECT-Liste enthalten
    Version: 3.0.03 Build-03.97
    Edited by: mesch181 on Apr 17, 2011 12:31 PM

    That error message has nothing to do with dropping an index.
    There is a bug in current versions of sql developer where the query used to populate the data grid is stored and if the table structure changes the query can be invalid. Try closing the table and re-opening it.

  • I need a virtual keyboard like the keyboard dock (with numbers and cursor keys) to work properly. Someone know if is it possible? s as an option in my ipad

    Why Apple not have a virutal keyboard for the iPad equal at the keyboard dock as option? For my is more easy work whith the same virtual keyboard in the iPad like my Mac.

    Hi czigrand,
    Thanks for visiting Apple Support Communities.
    Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
    In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
    iTunes: Sending iTunes Gifts
    http://support.apple.com/kb/HT2736
    Best Regards,
    Jeremy

  • Why does muse not properly support alt tags for images?!?!

    Greetings,
    I am fully aware that when you place an image on your site page, right click, click edit image properties, you can then create the title text (by writing the contents in the Tooltip box) and create Alt Text (by writing the contents in the Alternative text box).
    What I cant get my head around is that when done, and published, most if not ALL seo checking programs (in my case  ravens-seo-tools) bring up an error that images are missing Title Text and Alt Text. Yes I have gone through every image on my site and have done everything I can do, that adobe has stated in their SEO Optimisation directions to ensure each image is properly optimised.
    Example:
    As you can see, it appears my site has an unhealthy amount of image issues.
    Looking at the third image above, an image on JEM Fulfilment Client Testimonial | Lin and Leo with the filename lin-and-leo-logo.jpg, the ravens seo tool program has picked up the ALT Text but has shows that their is no Title Text.
    and looking at the image provided below you can see that I have filled out each part to ensure this image is optimised.
    Can someone please explain, what is up with MUSE. Because I have been trying to figure out how to fix this situation for months and I havent been able to come up with any resolution.
    any help would be greatly appreciated.
    Kind Regards

    It seems to be showing up in the source code.

  • Next / previous image swap WITH larger image popup

    Very simply what I need to do is almost identical to what you
    see here:
    http://www.java-scripts.net/javascripts/Slide-Show-Script.phtml
    (scroll down to the animal pictures)
    When you click "next" and "previous" the images swap through
    a series
    called "img1.gif" "img2.gif" and "img3.gif"
    So far so good. However let us assume there is also a set of
    images called
    "img1_lrg.gif" "img2_lrg.gif" and "img3_lrg.gif" which are
    larger
    versions of those little thumbnails. I need for the
    appropriate associated
    large image to popup in its own window when the thumb is
    clicked.
    Has anyone a lead on something like that?
    Thanks very much.

    On Thu, 28 Sep 2006 17:59:37 +0000 (UTC), [email protected]
    (Clay)
    wrote:
    >Very simply what I need to do is almost identical to what
    you see here:
    >
    >
    http://www.java-scripts.net/javascripts/Slide-Show-Script.phtml
    >
    >(scroll down to the animal pictures)
    >
    >When you click "next" and "previous" the images swap
    through a series
    >called "img1.gif" "img2.gif" and "img3.gif"
    >
    >So far so good. However let us assume there is also a set
    of images called
    >
    >"img1_lrg.gif" "img2_lrg.gif" and "img3_lrg.gif" which
    are larger
    >versions of those little thumbnails. I need for the
    appropriate associated
    >large image to popup in its own window when the thumb is
    clicked.
    >
    >Has anyone a lead on something like that?
    >
    >Thanks very much.
    That sounds simple, where are you stuck? Do you not know how
    to open a
    popup? BTW, the JustSo Picture Window extension would be
    perfect for
    the popups.

  • Left and right arrow keys are not working properly now

    I searched the forum and didn't see this posted. My left and right arrow keys are not working properly now.
    For example, when typing, left arrow does not produce the desired action (move cursor one spot to the left), and right arrow does not produce the desired action (move cursor one spot to the right). Also, control + left no longer activates spaces, and control + right no longer activates spaces.
    Interestingly, in investigating the problem, I noticed that my shortcut keys for activating spaces and for activating expose had been changed (software update?). Before, I had set F5 (without pressing fn) for expose and had set F6 (without pressing fn) for spaces. Now, I noticed spaces was set back to the default of F8 (requiring fn).
    The issue persists after shut down, and even when logged on to other users, e.g. Guest.
    All other keys seem to be working fine, including the up and down arrows.
    I don't think it's a cleaning issue because fn + left + right produces the "[" character on the screen.
    Any ideas?

    I'm having the same type of issue on my MacBook except not with arrow keys. The volume keys do different things when I click on them. For example, the mute key brings up the dashboard and the volume up key makes all the open screens smaller (don't know what this feature is called). I did a software update then restarted the computer when this starting happening. Any help would be greatly appreciated, thanks.

  • Excel 2013 not switching cells with cursor keys

    Hello
    I am currently having trouble with excel 2013 x64
    When i use the cursor keys like in earlier versions of excel, instead of navigating through cells, the whole sheet scrolls by that cell in one direction. I am not sure if I have changed the settings or not and any help making it work like older versions
    of excel and the 32 bit edeition.
    Thank you

    Maybe you have accidentally pressed the Scroll Lock key (sometimes the key says ScrLk. Most keyboards have a light to indicate that Scroll Lock is on. Pressing the key again turns it off.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

Maybe you are looking for