Cursor lagging when detecting networks

My mouse cursor is very very laggy when I turn on my airport and while Leopard is detecting networks. Sometimes, if the wifi network signal is weak, when I mouse over the network with the weak signal, it lags more (during 5 sec or something).
It is quite annoying to be honest...
Any of you experience the same problem?

Same hear. 15" MBP bought July of last year. Are you running 10.5.1? I was told by a Genius Bar guy that some models made around the time that I got mine have a slightly different card and that might be the issue. I don't have a solution, just commiserating.

Similar Messages

  • Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers a

    Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

    Good day!
    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    Regards,
    Pfaffenbichler

  • HT5219 Why is there a cursor lag when painting Photoshop on the Thunderbolt Display when conected to my MacBook Pro?

    When painting or using the cursor in Photoshop 6 there is a marked cursor lag, can anyone suggest any fixes?

    Hi JanStran,
    You may need to check your Display settings and/or resolution.
    The article below explains how to used Clamshell mode "closed display" on your Macbook Pro, versus "mirroring."
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    Hope this information helps ...
    - Judy

  • Extreme mouse cursor lag when using Accessibility Zoom (Fullscreen) in Yosemite

    I have a Retina MacBook Pro running OS X Yosemite (10.10), clean installed, connected to an external Thunderbolt Display. When I zoom in using Accessibility, I experience a very prominent lag, moving my mouse cursor (either with my Magic Mouse or Magic Trackpad or the built-in Trackpad) around or when zooming out. It is especially visible when zoomed in on applications like Calendar and Mail. This never happened in Mavericks. My settings are as follows.
    I've tried creating a new user account on my Mac and the problem still persists, which leads me to believe it's a bug with Yosemite.
    Anyone else have the same problem?

    I also have the same exact problem. I have a i5 iMac Mid 2011 with an upgrade to 10.10 Yosemite connected to an external display. I like you never had this issue with Mavericks. Zoom is so painfully slow now that I had to disable it. My iMac has 12 GB of RAM and even with no apps opened, zoom is killer slow.. makes me want to punch a wall-kinda slow.
    I think it's clear to say that something is up with 10.10.. some bug.
    Apple please fix us zoomers

  • Cursor lags when something is executing on Macbook Pro

    When I move something or execute some action, the cursor doesn't respond for a second or so. Anyone else experience this? Any cures?
    Sean

    This is normal. It has something to do with accidental clicking or something. I am not sure exactly what it is called, but everyone's does it. I think I remember someone saying it can be disable by changing settings in the mouse/keyboard section, but I am not sure exactly which one. It happens to me when I change the name of a song in iTunes. That is where I notice it the most. Hope this helps a little.

  • When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

    When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
    == This happened ==
    Every time Firefox opened

    try
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Corporate Win7/Office 2010 | Severe Lag when opening Office 2010 files over the network

    Good Evening Everyone,
    I work in a corporate environment for one of the top banks in the country (USA). We recently upgraded our computers to Windows 7. (The image has office 2010 included in the build)
    I've been experiencing some severe lag when opening Office files over the network. Let me start by saying I've researched a lot and have yet to find a solution that works or even makes much of an improvement. 
    Notes: My laptop is new (64-bit Win 7 Enterprise). The remote desktop where the files lie is new as well. (64-bit Win 7 Enterprise) Both computers have good hardware and more than enough juice to handle applications. 
    There are certain files I work on along with other co-workers that we store on a computer within the office. We simply create shortcuts to the files on our local machines and make changes, etc. from there. However, after this upgrade, every time I try to
    open a file on the remote computer, it takes over a 1 minute to load. I've spoken to our support team who sent someone out and confirmed it's not the network. 
    Both computers are on the same subnet as well. I've changed the trust center settings on both the client computers and "server" to trust any computer on the network. I have also changed the network card's speed from "Auto Negotiate" to
    full duplex 100mbps with no luck.
    I am out of options here and in desperate need for a fix. Even saving changes to a file we work on takes forever. 50% of the time when I close a spreadsheet, the title bar has a not responding message and takes a minute to eventually close. 
    PS: Extra Info : All computers run McAfee AV and use McAfee for disk encryption. I've confirmed all computers are up-to-date in every respect with the AV software. 
    Thanks,

    Try: 
    Open My Computer.
    Open the Tools menu and choose Folder Options...
    Select the File Types tab.
    Select the extension (for example DOC, or XLS) of the file that is slow to open.
    In the Details section, click [Advanced], and another dialog box will open. 
    In the Actions section, click Open then click [Edit...], and another dialog box will open.
    http://windowssecrets.com/forums/showthread.php/149672-10-9-2012-Updates-and-very-slow-opening-of-Office-files
    KR

  • [SOLVED] Windows lag when moved...?

    Using Xfce, with and without composite, the windows lag when being moved. It's like the whole window isn't held together properly; the window movement is kind of choppy, but still smooth, if that makes any sense.
    This makes for a rather bad experience. And I'm clueless as to what causes this. It's certainly not my HW:
    CPU: i5-2500k
    GPU: GTX 460
    RAM: 8GB, 1600mhz
    Also, even more disturbing, is that when moving a window there seems, if you look closely enough, to be a white after-effect where text and the pointer was a few moments ago. As an example: If I grab a window and move it in a small circle, this happens.
    Any ideas? Running nuts here...
    Last edited by nonah (2012-03-19 00:27:31)

    Okay I'll try but I can't guarantee the completeness. Here are all the steps I managed to recollect:
    First install:
    compiz, compiz-decorator-gtk, ccsm, compiz-fusion-plugins-main
    the decorator and plugins are somewhat optional but will provide you with gtk window borders and more options.
    then edit the following paragraph in /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml
    <property name="Client0_Command" type="array">
    <value type="string" value="compiz"/>
    <value type="string" value="ccp"/>
    </property>
    (This replaces xfwm4 with compiz as the default window manager for Xfce)
    Then after running
    sudo nvidia-xconfig
    add the following line to the "Device" section within /etc/X11/xorg.conf
    Option "TripleBuffer" "True"
    also add
    nvidia-settings -l
    to your autostart.
    Now open up ccsm and within "General Options" on the tab "Display Settings":
    tick the option for "Sync to VBlank"
    UNtick the option "Detect refresh rate"
    drag the slider for the refresh rate to match the refresh rate of your display (60 Hz in my case)
    Go back to the main page of ccsm and open "Window decoration". Insert the following line into the "command" field:
    gtk-window-decorator --replace
    (This will provide you with your gtk borders on compiz otherwise you would have to use emerald)
    On the main page of ccsm tick "Move windows" under "Window Management". (Otherwise you won't be able to move windows around at all)
    Restart your system and it should load compiz now. If compiz is acting funny you can always temporarily switch back to xfwm by running "xfwm4 --replace".
    Note that you will have the best video experience with mplayer (no GUI).
    Consider using vdpau as video output with the corresponding codecs if you don't plan to play 10bit H264 videos, otherwise stick to xv.

  • Node failed to join the cluster because it ould not send and receive failure detection network messages

    One of my customers has a Windows Server 2008 R2 cluster for an Exchange 2010 Mailbox Database Availability Group.  Lately, they've been having problems with one of their nodes (the one node that is on a different subnet in a different datacenter) where
    their Exchange databases aren't replicating.  While looking into this issue it seems that the problem is the Network Manager isn't started because the cluster service is failing.  Since the issue seems to be with the cluster service, and not Exchange,
    I'm asking here. 
    When the cluster service starts, it appears to start working, but within a few minutes the following is logged in the system event log.
    FailoverClustering
    1572
    Critical
    Cluster Virtual Adapter
    Node 'nodename' failed to join the cluster because it could not send and receive failure detection network messages with other cluster nodes. ...
    It seems that the problem is with the 169.254 address on the cluster virtual adapter.  An entry in the cluster.log file says: Aborting connection because NetFT route to node nodename on virtual IP 169.254.1.44:~3343~ has failed to come up. 
    In my experience, you never have to mess with the cluster virtual adapter.  I'm not sure what happened here, but I doubt it has been modified.  I need the cluster to communicate with its other nodes on our routed 10. network.  I've never experienced
    this before and found little in my searches on the subject.  Any idea how I can fix this?
    Thanks,
    Joe
    Joseph M. Durnal MCM: Exchange 2010 MCITP: Enterprise Messaging Administrator, Exchange 2010 MCITP: Enterprise Messaging Administrator, MCITP: Enterprise Administrator

    Hi,
    I suspected an issue with communication on UDP port 3343. Please confirm the set rules for port 3343 on all the nodes in firewall and enabled all connections for all the profiles
    in firewall on all the nodes are opened, or confirm the connectivity of all the node.
    Use ipconfig /flushdns to update all the node DNS register, then confirm the DNS in your DNS server entry is correct.
    The similar issue article:
    Exchange 2010 DAG - NetworkManager has not yet been initialized
    https://blogs.technet.com/b/dblanch/archive/2012/03/05/exchange-2010-dag-networkmanager-has-not-yet-been-initialized.aspx?Redirected=true
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Server side does not detect network failure

    Hi folks,
    I coded a simple chat program. When a client connects to the multi-thread server, server shows newly connected client's IP address. Now, if the connection between client and server is down, client detects and terminates itself but server does not. The server still shows that client as connected. when I traced the server side, I found out that server was waiting at the readObject (client object input stream) line but it didn't throw any IOException. I tried to send some message to all connected client at every 20 seconds, so I expected to catch IOException when the server did not reach the client. Unfortunately, it didn't work. That is my question how can server side detect network failure?
    Thanks for help.
    Regards
    Bulent

    That is how TCP works (noting that it has nothing to do with java.)
    Your solution is one of the following or some combination...
    - If the server does not receive something every X time period then it disconnects.
    - If the server has not received something after X time period it sends a keep alive message to the client. If the client does not respond (or the message fails) then the server disconnects.

  • TCP Read does not detect network conncetion closed error (66)

    Hi Dear all,
    Instead of LAN i am using WLAN to connect PC and mobile. All communication read and write operations are performing ok. But the only problem i am facing is that once i disconnect network connection from mobile my labview TCP read operation does not detect it and only timesout at its specified interval. Although for Bluetooth network connection if i disconnect from mobile then BT read detects it as network conncetion closed by peer error (66).
    Can someone help me on this.
    Thanks & Regards
    awais qureshi
    Solved!
    Go to Solution.

    Awais Qureshi wrote:
    Hi Dear Norbert,
    I am still waiting for your reply. Whats error you get once you unplug LAN cable? i am unable to understand how to detect Disconnection during Read Time out. Kindly help me in this.Thanks
    Dear VT Kim,
    I studied your recommended article but which way Labview handles TCP close connection then. i am unable to understand how to detect Disconnection during Read Time out. Kindly help me in this.
    Regards
    awais qureshi
    I have not tested it but more likely than not you would get an error 59 when the network cable is unplugged. Error 66 is for when the network is still up and you attempt to communicate on an established connection that has been closed by the other side. This is not an error that you will se from a TCP read very often.
    Also, please keep you related question in a single thread rather than starting multiple threads for the same topic.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • Brush Tools lagging when Graphics Processor enabled

    Hi,
    I've recently installed Photoshop CC and am experiencing a problematic lag when using the brush tool.
    This occurs either when using a mouse, or a tablet device and stylus.
    I'm running a brand new laptop. It has a Quad-core I7-4700MQ, 32 gb RAM and an NVIDIA GTX 780m dedicated graphics card, with Windows 7 64 bit professional.
    It also has an integrated Intel HD Graphics 4600 card, but PS CC is set to use the dedicated 'High Performance' card.
    When the graphics processor is enabled in the performance menu, either at basic, normal or advanced, the brush tool is visibly slow.
    However when the graphics processor is disabled, the brushes work perfectly.
    I've allocated 80% Ram usage to Ps, as well as increased cache tile size to 1028k. I'm using my primary drive as a scratch disk, but being a solid state I didn't think this would cause a problem.
    Other software such as Flash CC seems to be working fine.
    For the work I'm doing in PS I need rotate canvas function, enhanced zoom etc working properly.
    Are the 700 series NVIDIA graphics cards compatible with PS CC? Seeing as its one of their latest, I wouldn't have expected any problems.
    Any help you can offer would be greatly appreciated.
    Thanks!

    Thanks for replies. Currently have Geforce 332.21 driver installed, which i believe is the latest. System info below:
    Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2394 MHz
    Built-in memory: 32687 MB
    Free memory: 28352 MB
    Memory available to Photoshop: 29643 MB
    Memory used by Photoshop: 80 %
    Image tile size: 1028K
    Image cache levels: 6
    Font Preview: Medium
    TextComposer: Latin
    Display: 1
    Display Bounds: top=0, left=0, bottom=1080, right=1920
    OpenGL Drawing: Enabled.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Drawing Mode: Basic
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    AIFCoreInitialized=1
    AIFOGLInitialized=1
    OGLContextCreated=1
    NumGPUs=1
    gpu[0].OGLVersion="3.0"
    gpu[0].MemoryMB=0
    gpu[0].RectTextureSize=16384
    gpu[0].Renderer="GeForce GTX 780M/PCIe/SSE2"
    gpu[0].RendererID=0
    gpu[0].Vendor="NVIDIA Corporation"
    gpu[0].VendorID=0
    gpu[0].HasNPOTSupport=1
    gpu[0].DriverVersion="?"
    gpu[0].Driver="?"
    gpu[0].DriverDate="?"
    gpu[0].CompileProgramGLSL=1
    gpu[0].TestFrameBuffer=1
    gpu[0].OCLPresent=1
    gpu[0].OCLVersion="1.1"
    gpu[0].CUDASupported=1
    gpu[0].CUDAVersion="6.0.1"
    gpu[0].OCLBandwidth=1.20989e+011
    gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
    gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
    gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
    gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
    gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
    gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
    License Type: Tryout Version
    Serial number: Tryout Version
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
    Temporary file path: C:\Users\Rob\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 217.7G, 94.7G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
    Installed components:
       ACE.dll   ACE 2013/10/29-11:47:16   79.548223   79.548223
       adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
       AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0  
       AdobeOwl.dll   Adobe Owl 2013/10/25-12:15:59   5.0.24   79.547804
       AdobePDFL.dll   PDFL 2013/10/29-11:47:16   79.508720   79.508720
       AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786  
       AdobeXMP.dll   Adobe XMP Core 2013/10/29-11:47:16   79.154911   79.154911
       AdobeXMPFiles.dll   Adobe XMP Files 2013/10/29-11:47:16   79.154911   79.154911
       AdobeXMPScript.dll   Adobe XMP Script 2013/10/29-11:47:16   79.154911   79.154911
       adobe_caps.dll   Adobe CAPS   7,0,0,21  
       AGM.dll   AGM 2013/10/29-11:47:16   79.548223   79.548223
       ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31  
       aif_core.dll   AIF   5.0   79.534508
       aif_ocl.dll   AIF   5.0   79.534508
       aif_ogl.dll   AIF   5.0   79.534508
       amtlib.dll   AMTLib (64 Bit)   7.0.0.249 BuildVersion: 7.0; BuildDate: Thu Nov 14 2013 15:55:50)   1.000000
       ARE.dll   ARE 2013/10/29-11:47:16   79.548223   79.548223
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2013/10/29-11:47:16   79.548223   79.548223
       BIBUtils.dll   BIBUtils 2013/10/29-11:47:16   79.548223   79.548223
       boost_date_time.dll   DVA Product   7.0.0  
       boost_signals.dll   DVA Product   7.0.0  
       boost_system.dll   DVA Product   7.0.0  
       boost_threads.dll   DVA Product   7.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
       CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
       CoolType.dll   CoolType 2013/10/29-11:47:16   79.548223   79.548223
       dvaaudiodevice.dll   DVA Product   7.0.0  
       dvacore.dll   DVA Product   7.0.0  
       dvamarshal.dll   DVA Product   7.0.0  
       dvamediatypes.dll   DVA Product   7.0.0  
       dvaplayer.dll   DVA Product   7.0.0  
       dvatransport.dll   DVA Product   7.0.0  
       dvaunittesting.dll   DVA Product   7.0.0  
       dynamiclink.dll   DVA Product   7.0.0  
       ExtendScript.dll   ExtendScript 2013/10/30-13:12:12   79.546835   79.546835
       FileInfo.dll   Adobe XMP FileInfo 2013/10/25-03:51:33   79.154511   79.154511
       filter_graph.dll   AIF   5.0   79.534508
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       imslib.dll   IMSLib DLL   7.0.0.145  
       JP2KLib.dll   JP2KLib 2013/10/29-11:47:16   79.248139   79.248139
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libiomp5md.dll   Intel(R) OMP Runtime Library   5.0  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       LogSession.dll   LogSession   2.1.2.1785  
       mediacoreif.dll   DVA Product   7.0.0  
       MPS.dll   MPS 2013/10/29-11:47:16   79.535029   79.535029
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       PatchMatch.dll   PatchMatch 2013/10/29-11:47:16   79.542390   79.542390
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CC   CC  
       Plugin.dll   Adobe Photoshop CC   CC  
       PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.2.0.36  
       PSArt.dll   Adobe Photoshop CC   CC  
       PSViews.dll   Adobe Photoshop CC   CC  
       SCCore.dll   ScCore 2013/10/30-13:12:12   79.546835   79.546835
       ScriptUIFlex.dll   ScriptUIFlex 2013/10/30-13:12:12   79.546835   79.546835
       svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
       WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
    Required plug-ins:
       3D Studio 14.2 (14.2 x001)
       Accented Edges 14.2
       Adaptive Wide Angle 14.2
       Angled Strokes 14.2
       Average 14.2 (14.2 x001)
       Bas Relief 14.2
       BMP 14.2
       Camera Raw 8.3
       Camera Raw Filter 8.3
       Chalk & Charcoal 14.2
       Charcoal 14.2
       Chrome 14.2
       Cineon 14.2 (14.2 x001)
       Clouds 14.2 (14.2 x001)
       Collada 14.2 (14.2 x001)
       Color Halftone 14.2
       Colored Pencil 14.2
       CompuServe GIF 14.2
       Conté Crayon 14.2
       Craquelure 14.2
       Crop and Straighten Photos 14.2 (14.2 x001)
       Crop and Straighten Photos Filter 14.2
       Crosshatch 14.2
       Crystallize 14.2
       Cutout 14.2
       Dark Strokes 14.2
       De-Interlace 14.2
       Dicom 14.2
       Difference Clouds 14.2 (14.2 x001)
       Diffuse Glow 14.2
       Displace 14.2
       Dry Brush 14.2
       Eazel Acquire 14.2 (14.2 x001)
       Embed Watermark 4.0
       Entropy 14.2 (14.2 x001)
       Extrude 14.2
       FastCore Routines 14.2 (14.2 x001)
       Fibers 14.2
       Film Grain 14.2
       Filter Gallery 14.2
       Flash 3D 14.2 (14.2 x001)
       Fresco 14.2
       Glass 14.2
       Glowing Edges 14.2
       Google Earth 4 14.2 (14.2 x001)
       Grain 14.2
       Graphic Pen 14.2
       Halftone Pattern 14.2
       HDRMergeUI 14.2
       IFF Format 14.2
       Ink Outlines 14.2
       JPEG 2000 14.2
       Kurtosis 14.2 (14.2 x001)
       Lens Blur 14.2
       Lens Correction 14.2
       Lens Flare 14.2
       Liquify 14.2
       Matlab Operation 14.2 (14.2 x001)
       Maximum 14.2 (14.2 x001)
       Mean 14.2 (14.2 x001)
       Measurement Core 14.2 (14.2 x001)
       Median 14.2 (14.2 x001)
       Mezzotint 14.2
       Minimum 14.2 (14.2 x001)
       MMXCore Routines 14.2 (14.2 x001)
       Mosaic Tiles 14.2
       Multiprocessor Support 14.2 (14.2 x001)
       Neon Glow 14.2
       Note Paper 14.2
       NTSC Colors 14.2 (14.2 x001)
       Ocean Ripple 14.2
       Oil Paint 14.2
       OpenEXR 14.2
       Paint Daubs 14.2
       Palette Knife 14.2
       Patchwork 14.2
       Paths to Illustrator 14.2
       PCX 14.2 (14.2 x001)
       Photocopy 14.2
       Photoshop 3D Engine 14.2 (14.2 x001)
       Photoshop Touch 14.0
       Picture Package Filter 14.2 (14.2 x001)
       Pinch 14.2
       Pixar 14.2 (14.2 x001)
       Plaster 14.2
       Plastic Wrap 14.2
       PNG 14.2
       Pointillize 14.2
       Polar Coordinates 14.2
       Portable Bit Map 14.2 (14.2 x001)
       Poster Edges 14.2
       Radial Blur 14.2
       Radiance 14.2 (14.2 x001)
       Range 14.2 (14.2 x001)
       Read Watermark 4.0
       Reticulation 14.2
       Ripple 14.2
       Rough Pastels 14.2
       Save for Web 14.2
       ScriptingSupport 14.2
       Shake Reduction 14.2
       Shear 14.2
       Skewness 14.2 (14.2 x001)
       Smart Blur 14.2
       Smudge Stick 14.2
       Solarize 14.2 (14.2 x001)
       Spatter 14.2
       Spherize 14.2
       Sponge 14.2
       Sprayed Strokes 14.2
       Stained Glass 14.2
       Stamp 14.2
       Standard Deviation 14.2 (14.2 x001)
       STL 14.2 (14.2 x001)
       Sumi-e 14.2
       Summation 14.2 (14.2 x001)
       Targa 14.2
       Texturizer 14.2
       Tiles 14.2
       Torn Edges 14.2
       Twirl 14.2
       Underpainting 14.2
       Vanishing Point 14.2
       Variance 14.2 (14.2 x001)
       Variations 14.2 (14.2 x001)
       Water Paper 14.2
       Watercolor 14.2
       Wave 14.2
       Wavefront|OBJ 14.2 (14.2 x001)
       WIA Support 14.2 (14.2 x001)
       Wind 14.2
       Wireless Bitmap 14.2 (14.2 x001)
       ZigZag 14.2
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Adobe Exchange
       Kuler
    Installed TWAIN devices: NONE

  • Windows 7 does not detect network hardware

    Using Boot Camp, I installed Windows 7.
    After restarting the computer it does not detect network hardware.
    So I cannot connect to my Wifi.
    What should I do?

    Did you download and install the Windows Support software? It was the first menu item when you ran Bootcamp Assistant. If not, run Bootcamp Assistant again and select the menu item to download the Windows Support software. Read the Bootcamp Installation Guide. http://www.apple.com/support/bootcamp/

  • Airport doesn't detect network occasionally

    I have an older macbook(2.2GHz Intel Core 2 Duo, Build 9J61) which I just bought last year which occasionally does not not detect my usual preferred network. This happens usually after I put the macbook to sleep. I then have to reset my router or restart my macbook to solve the issue. This often gets frustration as doing the following is very time consuming and resetting the router often annoys my roommates. Is there another way to solve this?

    When the network isn't detected, have you tried simply turning AirPort off and then back on via the AirPort menu bar icon?
    That works when it sporadically happens to me.

  • My iphone cannot detect network

    my iPhone cannot detect network when ever i insert sim card it will not show service

    Hi Nwobodo,
    Welcome to the Apple Support Communities!
    I know that it can be frustrating when you are not getting cellular service on your iPhone the way you would expect. In this situation I would recommend working through the troubleshooting steps in the attached article.
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Have a great day,
    Joe 

Maybe you are looking for