Cursor Locked: Cannot use backspace, up down etc
All,
I am facing this strange issue today of not being able to use any of the scroll functions either in the keyboard or through the mouse. I tried refreshing my SQLDeveloper s/w.
Please help.
I use 1.5.1.
Regards,
Krishnaprasad Rao
The keyboard issue might get fixed by doing Preferences - Accelerators - Presets - Default, but the mouse won't be affected by that.
Else you can reset to factory defaults by deleting the \Application Data\Sql Developer\SystemX.X folder under your Windows profile.
Hope that helps,
K.
Similar Messages
-
Cannot use BACKSPACE key in SQLPLUS
just installed 9i on RH 9.0 when I enter sqlplus the backspace does not work. I see ^?
if I use the DEL key I see [[3~
how do I make sqlplus let me use backspace key ?
my backspace key works fine in RH Unix prompt
thanksdid you try with this option ?
before enter in sqlplus you can set this :
oracle@chopin:~> set -o vi
and after connect with sqlplus you can erase
pressing ESC and several times the key "x"
Joel P�rez -
I am using macbook pro, been having a problem with my keyboard. Suddenly the uppercase, lowercase, numeric, etc are not working properly. I even cannot submit question to Apple, because I cannot type my password properly. Thank God I have this ipad, so I submit question using it.
This has only been going on several days, and it managed to frustrate me, as my work is much dependable on my laptop now. Please help.....I tried everything I know, unsuccesfully. I just moved in to my hometown- a small city, nobody understand apple here, don't even have a store nor service center for apple....
Thank you!Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out. -
CS5 Panels acting bizarrely - unable rearrange the dock panels and cannot use the drop down menus
The panels are not functioning properly in my new version of CS5. Several things are wrong:
I cannot click a panel tab and move it. When I click on a panel, nothing happens. I tried moving the swatch panel to the bottom of the dock and I got nothing. I tried Command Click and I was able to move the swatch panel off the dock, but when i tried to re-dock it at the bottom of the panels, it would not dock in.
Also, when I try click on the menus in the panels in the dock, nothing happens. I have to click multiple times....and then the drop down menu just appears for a milisecond and then disappears....so I am not able to select anything.
Oh...and I am working in 32 bit.
Anyone have a clue what to do?Sounds like your problem is solved.
If you look at Alien skin's website regarding CS5 (http://support.alienskin.com/Article_BB9D5.aspx), then you'll see that they state that their plug-ins are CS5 compatible, so maybe you have an old version, or maybe you want to let them know about this issue. -
My iphone touch screen suddenly stopped working. I hold the power button to power off, but cannot use slider to complete the action. Thought perhaps restart would help.It's keeping proper time, etc., but i can't use it at all. Help. Any suggestions?
Try a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up. NO data is lost.
-
Cannot verify server window is open and I am locked from using IPad
cannot verify server window is open and I am locked from using IPad
When you say that you rebooted, do you mean like this? Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If thats what you did and it failed, it couldn't hurt to reset your router as well by unplugging it from power for about 30 seconds.
You can also try Resetting All Settings. Settings>General>Reset>Reset All Settings. That will require you to join the network again and that might trigger the connection again. No data is lost when resting all settings but as the name implies, all device settings will be restored to factory defaults and you will have to enter your preferred settings again. -
While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything. This is becoming incredibly frustrating. It happens at random time and a restart of the computer is all that helps, then with out any notice it starts to do this again. Mac Book Pro i7 2.2 16 GB 1333 Ram, (2) 450GB SSD both internal to machine. At this point I am losing file because I am unable to save in the file type I need. Does anyone out there know how to solve this issue?
Thanks
philI haven't been unify photoshop much in the past month, but I did try your suggestion and it seemed to work for a while. Today when i went to save a document the same thing happened: click on file>save at this point I can not click on save even though it is highlighted. Tryed to use command s that brings up the save dialogue box, but when I try to change file type I again cannot select it from the drop down menu.
-
My icloud account was locked yesterday due to server (iCloud) Faillure 26/11/12. PM
I cannot use the account because I canot answer my security question right. Also my second e-mail adress was no activated, so I cannot activate the icloud account via e-mal
What Can I do?
Thank YouIt would worth your asking in the Final Cut Pro X forum - someone else may have experienced the same problem.
I assume you have already trashed Preferences/ByHost/com.apple.dotmac... (several files beginning with this) and (same path) com.apple.idisk - though I suspect the problem lies rather with the individual programs which are trying to access something on the non-existent iDisk. -
My gps is not working. I cannot use turn-by-turn navigation in google maps. I downloaded a GPS test app and it showed my phone is not locking on any satellites. How can I correct this?
We certainly want to make sure you get the most out of the GPS, wplaxico! Was this tested primarily outdoors? When did this begin? Any other recent apps of updates installed when this started?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)! -
I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!
''I figured it was going to be FAFSA causing your problem.''
Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 -
I am a Macbook user Lion OS X 10.7.5 …have been using Target, Walgreens, Shutterfly, etc. for 5 years with photo developing. Recently cannot use any of these photo websites because of the "Plug In Failure" error..which I have never had. Have updated adobe flash player..still to no avail. Suggestions? Thank you.
You need to do a "clean install": http://forums.adobe.com/thread/1267823
That'll remove the old plug-in completely.
Works 99% of the time. -
PLS-00455: cursor 'CUR_1' cannot be used in dynamic SQL OPEN statement
create or replace function f_my_test_func
return refcur_pkg.refcur_t1
is
cur_1 refcur_pkg.refcur_t1;
begin
open cur_1
for
'select * from dept';
return cur_1;
exception
when others
then
insert into ddl_log (SQLTEXT)
values
('fucntion error');
end;I would suggest that cur_1 refcur_pkg.refcur_t1 is a stongly typed ref cursor i.e. it has RETURN dept%ROWTYPE or something similar in the declaration. You can't use strongly typed ref cursors with dynamic SQL in this way. The declaration should be weakly typed or just use sys_refcursor.
DTYLER_APP@pssdev2> DECLARE
2
3 TYPE t_Strong IS REF CURSOR RETURN dual%ROWTYPE;
4
5 lc_Strong t_Strong;
6
7 BEGIN
8
9 OPEN lc_Strong FOR
10 'SELECT * FROM dual';
11
12 END;
13 /
OPEN lc_Strong FOR
ERROR at line 9:
ORA-06550: line 9, column 10:
PLS-00455: cursor 'LC_STRONG' cannot be used in dynamic SQL OPEN statement
ORA-06550: line 9, column 5:
PL/SQL: Statement ignored
DTYLER_APP@pssdev2>
DTYLER_APP@pssdev2> DECLARE
2
3 TYPE t_Weak IS REF CURSOR;
4
5 lc_Weak t_Weak;
6
7 BEGIN
8
9 OPEN lc_Weak FOR
10 'SELECT * FROM dual';
11
12 END;
13 /
PL/SQL procedure successfully completed.
DTYLER_APP@pssdev2> DECLARE
2
3 lc_Weak sys_refcursor;
4
5 BEGIN
6
7 OPEN lc_Weak FOR
8 'SELECT * FROM dual';
9
10 END;
11 /
PL/SQL procedure successfully completed.
DTYLER_APP@pssdev2>HTH
David -
Lock the plant so that other user cannot use the same plant.
Hi Gurus!
I ahve this small report which shows the pro-rate factor . In this report I need to block the plant or lock it(a soft) lock witha message that some other user is using the plant so that other cannot use the same plant to post.Following is the report and if soemone can help me out would be very kind enough.I ahve added teh code where validation of plant is doen , so it must be somewhere here the locking should be done as per my thinking . Kindly suggest please.
*& Form get_pro_factor
* get pro rate factor from the given
* combination of plant/sloc/mat#/period
form get_pro_factor .
select single zpr_factor zpr_disp_factor zpr_pipe_net zpr_pipe_gross
from zprfactor
into (zprfactor-zpr_factor, zprfactor-zpr_disp_factor,
zprfactor-zpr_pipe_net, zprfactor-zpr_pipe_gross)
where zpr_werks = p_werks and
zpr_lgort = p_lgort and
zpr_matnr = p_matnr and
zpr_mjahr = p_mjahr and
zpr_monat = p_monat.
v_subrc = sy-subrc.
if zprfactor-zpr_factor = 0.
if c_wp = p_lgort+0(2).
zprfactor-zpr_factor = 1. " Don C added this routine
endif.
endif.
if zprfactor-zpr_disp_factor is initial.
if not zprfactor-zpr_pipe_gross is initial.
zprfactor-zpr_disp_factor = zprfactor-zpr_pipe_net / zprfactor-zpr_pipe_gross.
endif.
if zprfactor-zpr_disp_factor is initial.
zprfactor-zpr_disp_factor = 1.
endif.
endif.
endform. " get_pro_factor
*& Form valid_plant
* validate whether plant entered in selection screen
* exists in database or not
form valid_plant .
if not ( p_werks is initial and
p_lgort is initial and
p_matnr is initial and
p_mjahr is initial and
p_monat is initial ).
select single werks from t001w into t001w-werks
where werks = p_werks.
if sy-subrc ne 0.
message e048(zmm) with p_werks.
endif.
endif.
endform. " valid_plant
*& Form FIND_MATKL
form find_matkl .
select single matkl into v_matkl from mara where matnr = p_matnr.
endform. " FIND_MATKL
*& Form UPDATE_ZPRFACTOR
form update_zprfactor using p_flag. "DEVK903224
call function 'ENQUEUE_E_TABLEE'
exporting
mode_rstable = c_e
tabname = 'ZPRFACTOR'
exceptions
foreign_lock = 1
system_failure = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
select single * from zprfactor where zpr_werks = p_werks
and zpr_lgort = p_lgort
and zpr_matnr = p_matnr
and zpr_monat = p_monat
and zpr_mjahr = p_mjahr.
if sy-subrc = 0.
zprfactor-zpr_rate_flag = p_flag. "DEVK903224
update zprfactor.
endif.
endif.
call function 'DEQUEUE_E_TABLEE'
exporting
mode_rstable = c_e
tabname = 'ZPRFACTOR'.
Thanks
Aaravcall function 'ENQUEUE_E_TABLEE'
exporting
mode_rstable = c_e
tabname = 'ZPRFACTOR'
exceptions
foreign_lock = 1
system_failure = 2
others = 3.
ENQUEUE_E_TABLEE } E_TABLEE is the name of the lock object, it starts with character "E". -
Cannot use any menus or dock icons. Tried turning off computer but message appeared asking 'am I sure'. If I press shut down button it doesn't respond. Any ideas? I was dropping multiple clips into my movie/project when it happened. It has been frozen for over an hour now. I can't hear the driving doing any work.
Thanks a lot. I had previously held the power button down and up popped the 'are you sure' message whhich provided a shut down button to press but it didn't work. Thanks for you help. I'll have a look in iMovie now to see if I've got any corrupted files. Thanks a lot
Kind regards
Derek White
Maybe you are looking for
-
Using 2 Apple IDs on one device
I want to use the cloud match/storage service for our family media. I have 2 iphones, an ipad, 2 macbook pros, 2 itvs, 2 ipod touches and 4 desktop computers. That all currently use the same itunes apple ID for media play & purchase. however the 2 ip
-
How can I strenghten a weak Airport Extreme (2nd Generation) signal?
I have been having a weak WiFi signal in my Airport Extreme. Even when I am in a room that is less than 30 ft away. Here are the details: AirPort Extreme 802.11n (2nd generation) Version: 7.6.1 Wireless Mode: Participate in a WDS network
-
"No password" on resource in IDM 8
Dear all, i am just creating a resource to pull userdata from an oracle table ( actually view but doesn't matter here ) but i do not want to manage a password, therefore i disabled the password feature. But i still getting an error when trying to sav
-
I want to use my iPhone apps on iPad and vice versa . Anybody knows how to do it. When I connect the iPhone to I tune, I can see the iphone applications. When I connect the iPad, I can't see on the desktop the application that are installed on the iP
-
Whats the description for EKET- BESKZ
Hi! whats the field description for EKET- BESKZ? and VBUK-LFSTK?