Cursor Mouse

Hi:
I want to change the mouse cursor by another, but Forms only
let me to use 'BUSY', 'DEFAULT', 'INSERTION'.
Please if you know how to do this, reply me.
Thanks.
null

Hi,
I'm agree with Milos, we are not suggest user using 3rd pointer, it maybe had compatibility problem that would caused potential problem.
Roger Lu
TechNet Community Support

Similar Messages

Cursor mouse error

Hello!
I have a problem with photoshop cs4 cursor mouse. When I click, the click isn't exactly where I had clicked. Is more down.
What can I do?
Tks!

Hi Pedro, this has been discussed before at this forum. A short summary: The problem occurs when you are in full screen mode and the rulers are visible. When you open a document or a Smart Object or create a new document the cursor is displaced by about 10 pixels. You get rid of the problem by hitting the f-key. This changes the screen mode and forces Photoshop to redraw the screen.
This seems to be independent from the graphic card you use, so I assume this is a bug and hope that Adobe will correct it soon.

With Standard Labview 6.1, is there a way to set (x,y) cursor-mouse position?

I am working on a project in standard Labview 6.1 that receives images from a webcam. This image array will then be analyzed to determine the position of a black dot on a white background. This dot will then correspond to an (x,y) coordinate point. We will then feed these coordinates into a program that will set the cursor mouse position to this point. However, we are uncertain on how to interface Labview with the computer mouse controls and are in need of assistance.

If you are simply wanting to set the coordinates of an existing cursor on a LabVIEW graph, then you can do that using Property Nodes. I have attached an example of this which you could take a look at.
J.R. Allen
Attachments:
SetCursor.vi ‏32 KB

Cursor Mouse Over on Frame (Container) Reveals Frame Edges

I just installed InDesign CS5 and everything is fine, but there is a set preference that I want to remove that causes the edges of the Frame(s) (or Containers) to light up as I move my mouse cursor over them.
I personally find this really annoying and can't seem to find a way to turn that default setting off.
Any advice?

Any advice?
Learn to live with it.
Seriously, you can't turn it off, though it apparently doesn't show in Presentation mode. I think eventuyally you get used to it, and even come to like it. I find it pretty handy now and then.

Cursor/Mouse trails in FMR

I am doing a software tour in Captivate, and for a number of reasons have to use FMR. After publishing there are gray marks that appear in the path of the mouse cursor as it moves around the screen. I've tried changing the quality settings and frame rate but nothing helps. This is a deal breaker with my client, so I'd like to get this fixed or I'll have to use Camtasia, which I'd rather not do since we already have Captivate licenses.

Something I found to work in removing these ghost lines is to turn off Advanced Project Compression.
I first turned off all compression options, then progressively turned them back on again and publish after each change to find which one was causing the issue. I found Advanced Project Compression cannot be used with FMV otherwise you get ghost lines. But they disappeared as soon as I turned this off.
See if this works for you.

Cursor/Mouse Freeze on Display

The mouse cursor is freezing momentarily before resuming. I have changed ports and plugged in another mouse (used) and it still happens.
I am running 10.4.11 on an eMac G4

Is the other mouse known-good (i.e., it operates OK on another Mac or PC)?
Have you recently added something like an external HD containing a large number of files? The pausing may be Spotlight indexing the volume in the background.
To check if there's a background process chewing up CPU cycles, open Activity Monitor and view all processes by %CPU usage and see if you can spot anything unusual. It may be easier to just Start Up in Safe Mode to disable extensions and see if the mouse performs better then.

Cursor/Mouse is stuck in top left hand corner by apple icon HELP

My cursor is stuck in the upper left hand corner and will not budge. I've restarted from the OS disk, looked at system profiler - usb profile and the mouse appears. This means it should be software related, not hardware related. I've restarted the cpu multiple times logging in under differnt users and have replaced the mouse & keyboard it's attached too with backups. NOTHING WORKS! My mouse is stuck in the top left hand corner barely touching the apple icon. When I click the mouse, the drop down menu appears so it is communicating with the cpu. However it just will not move/track anywhere! I'm an almost 20 yr mac user having survived a few 'sad mac' faces in the Mac Classic, Performa, & 8100 days, but have never run across something like this before.
HELP PLEASE!!! Would love to know a fix for this, or even what has caused it. In lieu of that I suppose I'd be okay with re-installing my system software as all programs & sensative info is on a seperate HD.
FYI I can't reinstall by rebooting via OS disc because the mouse doesn't work. Any help here?
FYI I do not have (not sure what it's called exactly) the function/preference turned on which allows me to move the cursor with the keyboard & can't get it turned on now as I can't navigate the system preferences windows in a functional manner.
Thanks & PLEASE HELP,
Phillip

Phillip,
I had this problem recently with a 3-year old Mac Pro intel, which was eventually replaced by Apple due to myriad other problems. When the frozen mouse happened, there was nothing I could do. Very frustrating to have the screen boot and the cursor is up there stuck, on the top left corner of the screen. Frozen. I called support several times. They were amazed. At one point they had me buy a cheap USB mouse (I was using a wireless mouse from Logitech and they thought there might be some kind of conflict). The USB mouse didn't work, either. Neither did an Apple mouse when I went out to buy one.
I ended up driving 70 miles to take the Mac to an Apple Store. I think they reinstalled the (Leopard) system in some secret way, because when the mouse was frozen so was everything else and I couldn't open the disk drive to put the OSX disk in there.
Why I'm here right now is that the same thing happened today with my NEW 3-month-old REPLACEMENT MAC PRO using its brand new wireless mouse, and I was hoping to find some insight. Again, a frozen cursor after the boot. Same top-left corner of the screen. Unlike you, when I click the mouse nothing happens -- no drop down.
Luckily, when I hard-rebooted by holding the button in, the mouse cursor came back. This time. Now I am afraid to turn my computer off. Been there done that before. Anyone have suggestions?
Thanks in advance.

Web pages slow to load with IE11 and the cursor/mouse is very slow to work until after page loads

Web pages are very slow to load, I hve run Norton Eraser and found no issues that would cause this

New HP Pavilion three weeks ago. After several attempts by the 'experts' I finally got a straight answer from a tech in the Philipines yesterday, 01-29-2015. HP and Microsoft are working to resolve the issue of slow pages and a dead cursor until the next page finally loads. You may have discovered that Google Chrome DOES NOT have this issue. Comments about HP would not be allowed here so I will just say, use Chrome until the issue with IE 11 is resolved.

Cursor (Mouse pointer) icon automatically changes

I am using Windows 8.1 and Office 365.
I have downloaded a mouse pointer icon in .cur format. I applied changes to the mouse pointer and it changed successfully. For sometime it will remain the same, but later (a few days) it changes back to the default pointer icon.What is the problem here?
Thanks

Hi,
I'm agree with Milos, we are not suggest user using 3rd pointer, it maybe had compatibility problem that would caused potential problem.
Roger Lu
TechNet Community Support

Cursor, Mouse and Keybpard Issues

Increasingly I am unable to click using either a mouse or the touch pad. I also will lose the ability to type in mid-stream. Any idea of what I might do, utility to run, that might diagnose and fix such issues? Thank you in advance.

Hi Kevin,
Have a look at this keyboard/trackpad solution.

Cursor / Mouse Icon

Hi. I want to change my mouse pointer to an open hand on
rollOver and to a grasped hand on click of a button so that the
button looks like its being grabbed. I presume you use the code:
onClipEvent (load) {
startDrag("", true);
Is this correct? My main question though is where do you get
the little white and black pixel icons? I've seen the same open and
grasped hand on a few sites so I presume they're generic default
icons that come with flash? Or flash resource sites? Any
suggestions?
Thanks.

Peter_Peterson wrote:
> I want to change my mouse pointer to an open hand on
rollOver and to a grasped
> hand on click of a button so that the button looks like
its being grabbed. I
> presume you use the code:
>
> onClipEvent (load) {
> startDrag("", true);
> }
not really, onload is one time event, ONLOAD only.
You need something in-a-loop like setInterval or EnterFrame.
Secondly, no need for Drag, just xmouse and ymouse cords,
provide
much smoother drag than actual drag action
make the icon a movie clip, give it some instance name, than
on
timeline frame :
MCname.onMouseMove = function() {
MCname._x = _root._xmouse;
MCname._y = _root._ymouse;
updateAfterEvent();
> Is this correct? My main question though is where do you
get the little white
> and black pixel icons? I've seen the same open and
grasped hand on a few sites
> so I presume they're generic default icons that come
with flash? Or flash
> resource sites? Any suggestions?
draw it in Photoshop, export as GIF or PNG, ta Daa!!!
Regards
Urami
Happy New Year guys - all the best there is in the 2006
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

[JS] Get Mouse Cursor Position

I have looked through the documentation and forums here and haven't found any reference to getting the cursor mouse position. I see info about text cursor position, but I am looking to capture the coordinates of mouse position. Is that possible with JavaScript (ExtendScript)?
Thanks for any help you can offer.
Dan

I want the script to create a specific sized picture frame on the page. It would be cool to make it at the current mouse position. Yes I can draw the frame myself, but I am trying to automate a tedious process, so having the script create the frame with all the proper options such as size and style will speed things up. I can create it in the middle of the page with the script, and then drag it into position manually, but it would be even better to use the mouse position when the script creates the frame.
Maybe an AppleScript could get the mouse position?
But then how would I pass that to my JavaScript?

How do I stop a blinking cursor?

I have a blinking cursor/mouse pointer when I am using Firefox for the past two or three days. The blinking cursor only happens when I surf; all other programs do not have this problem. I have the latest version of Firefox installed (17.0.1). Using the F7 key, I have turned caret browsing on and off with no change. I have tried to restart and shutdown my PC, along with restarting Firefox. I do have the Ghostery extension enabled, but I have been using Ghostery for months with no problem like this. My PC summary is as follows:
OS
Microsoft Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 650 @ 3.20GHz 78 °C
Clarkdale 32nm Technology
RAM
8.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24)
Motherboard
Dell Inc. 0C2KJT (CPU 1)
Graphics
SAMSUNG (1920x1080@60Hz)
DELL IN2020M (1600x900@60Hz)
ATI Radeon HD 5450 (Dell) 76 °C
Hard Drives
932GB Western Digital WDC WD1001FAES-75W7A0 ATA Device (SATA) 45 °C
Optical Drives
PLDS DVD+-RW DH-16ABS ATA Device
Audio
AMD High Definition Audio Device

You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

The mouse on my Macbook Pro is acting like a maniac, moving around on it's own, and clicking on it's own!

This happened completely out of the blue when I started my computer this morning. At first I just noticed that the touchpad wasn't responding very well. Then the cursor started moving on it's own, and clicking completely randomly at times as well. I have no idea what's going on or what may have happened, as I'm VERY careful with my laptop. Have tried restarting several times, it doesn't do the trick. It's also nearly impossible to try and change any settings or work at all on the computer, as the cursor/mouse is living a life on it's own (typing this from my iphone...).
Help!

UPDATE:
I just solved this by plugging a mouse into the laptop, disabled "tap to click", and then unplugged the mouse again.
The trackpad now works as perfectly as it used to. I also enabled "tap to click" again, and it also works now.

Mavericks upgrade mouse issues

Having problems with wireless mouse since upgrading to Mavericks I few days ago. Sometimes I can't click on links. It goes all over the place on its on. I've even had Yahoo messagesI've type vanish before I can send them.. Any suggestions?

Hi csp256,
Thanks for visiting Apple Support Communities.
Try these steps first if you are experiencing unexpected behavior with your mouse cursor:
Mouse does not track as expected (jittery, jumpy, slow, fast).
The Apple Wireless Mouse can be used on most smooth surfaces, however if tracking issues occur try these options:
Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
Try using a different surface to see if the tracking improves.
Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
You can find these steps here:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
Next, boot into Safe Mode and see if the issue occurs there:
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
Regards,
Jeremy

Cursor Mouse

Similar Messages

Maybe you are looking for