Cursor not stopping rolling text when pointed at it

Unable to stop rolling text when cursor pointed at it. This works ok on other browsers. By using the reset with the disabling or enabling any add on the scrolling text will stop with the cursor as it should, but once you close Firefox and return it stops working.Same when computer is restarted or shut down. I have tried using the Firefox restart with add ons disabled and also uninstalled Firefox 27.0.1 and reinstalled with no success. The operating system is Mac osx Mavericks.
John.B

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • BADI BUPA_INBOUND debug not stopping at the break point

    Hi Guys,
    When downloading the customer master from ECC to CRM BP category type is defaulting to Organizations for type person. Am trying to change this based on a condition in the BADI BUPA_Inbound. I set a external break point in this badi but when tried to download the customer master from ECC debug is not stopping in the badi.
    Could anyone please guide me to solve this issue?
    Thanks,
    Sundar

    Praveen,
    just have a look at sample code of VOFM.
    Go to the routine number that needs to be copied.
    Put your cursor on the routine number field that needs to be copied.
    Overwrite that number with your new routine number and hit enter.
    The new routine will be created as a copy of the old routine and you can modify the new routine as you need it.
    Ex.
    You have to copy routine 104 to 904
    Routine number   Description          Active
    104              Bill.bus.item data   X
    Put your cursor on 104 and then change it to 904 and hit enter.
    904 will be created as a copy of 104 and you can make your changes in 904.
    Don't forget to activate it after you are done.
    Hope it helps.

  • Spool file does not contain any text when PDF is printed

    When we print some PDF files via Adobe Reader, the printjob does not contain any text.
    In Adobe Reader I can select the text but when you print it, it prints it as images (polygons records in EMF) instead of text (e.g. EMR_TEXTOUT).
    Two questions:
    How can we make sure that Adobe Reader always prints text?
    On what is the decision based in Adobe Reader to print the PDF document as an image or as text?

    Well we are looking for this information, otherwise we would not have asked this question. I really hope to get in contact with a Adobe Reader printing specialist who could give us these answers.
    There must be something that decides to print as image or with text.
    E.g. Adobe Reader 9 often prints text compared where Adobe Reader XI doesn't print the text for the same PDF.

  • Macbook Pro cursor not aligning with text

    My Macbook pro cursor doesn't line up with the text I want to click on. I have to go to the line below for it to click on the correct line. Does anyone know how to fix this problem?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ \(\2\)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' | tail -n50 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Editable .pdf not showing edited text when uploaded to printer

    I created a form for company business cards so that employees could fill in their own info. Everyone has Reader, so i figured it would work. When I uploaded the filled-in form to various printing sites (I tried several), the text was gone. I feel like there's a simple solution, I just don't know what it is.

    I have run into this with something I am doing.  Vistaprint doesn't show the preview with the form data, nor does my iPad.  But Outlook (as a preview), Adobe Reader/Acrobat, and Staples Canada Print & Copy all DO show the preview with the form data.
    I am curious to see if Vistaprint would actually print with the form data or not, but instead I just switched to Staples for this need. For those needing Vista, I suggested a program like CuteFTP Writer which I have used in previous jobs for those without the full Adobe suite.

  • Keynote not displaying all text when projecting

    updated to the new keynote on my iPad mini. Now all of the text doesn't display (particularly when using the build feature).

    Try asking in the Keynote for iOS discussion, this discussion is dedicated to Mac users:
    Keynote for iOS

  • I'm getting a weird lag bug in adobe flash on my macbook where when I move my cursor no lag happens but when I stop I get lag from chatroom? Is there a fix? I'm on Mavericks.

    Not does it only lag but the animations stop in the ads and in people avatars because some of the people there are running animated avatars. I just found it weird when I moved my cursor it stopped lagging, but when I leave my cursor still the chat freezes/lags. I would have blamed the specs on my older Macbook but why would the animations run fluid on Safari when my cursor moves?
    Adobe Flash chatroom: http://xat.com/chat
    Specs: Macbook May 2009 13" 2.13ghz 4gigs ddr2 ram with a 240gb ssd harddrive
    Operating System: Mavericks

    I think you can thank Apple for this.  See this discussion.
    Photoshop CC: MacOS 10.10 Yosemite: Graphics driver problem
    Nancy O.

  • Itunes 10 will not stop auto syncing

    I have itunes 10 on a mac and a 160 gb ipod classic.
    it will not stop auto syncing when I plug in my ipod, even though "do not auto Sync" button is checked as well as checking off "do not open itunes automatically.
    It syncs FOREVER. I would love to find a way to stop this from happening. I dread plugging in my ipod to put on new music etc.

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • I am so frustrated.  I put ab object and/or a text box on a page and then cannot select it - the Text cursor (not pointer) is put on the object or text box and nothing happens.  It is so frustrating!  I then open up Everweb and the same thing,

    I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens.  It is so frustrating!  I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot.  I know it must be something system wide as it happens in apps other than Pages.

    I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens.  It is so frustrating!  I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot.  I know it must be something system wide as it happens in apps other than Pages.

  • Debugger Not Stopping at Break Points

    Howdy folks,
    I am trying to debug a rule in which I checkout / modify / checkin a renameUser view. I set some break points at the invoke statements for checking out and checking in. The rule is called from my Update User workflow. I know the rule is executing because I am dumping the context to a text xml file. The break points are right before and after the invoke that dumps the context to xml. However, when I update someone the debugger is not breaking in and stopping the thread to let me step through it. I would really like to see why my checkin and checkout invokes are not working, but can't see the error message due to the debugger not stopping...
    Does anyone have any advice, clues or ideas to get the debugger to work more correctly?

    It's probably running anonymously. That was my issue I think. The break points don't work on anonymous execution. At least not for me. Now, you can specify to use anonymous break points.. But then it breaks at EVERY anonymous break point. I had a hard time stepping through them all to get to what I needed to see execute, before it would time out... good Luck...

  • Re: g6t-2000 loading circle next to cursor will not stop blinking

    I have the same problem.I got a blinking circle on my screen and every time this circle show up, i have to turn off my pc because don't let me do nothing. Any solution for that issue? My pc:HP ENVY Recline TouchSmart All in One - 27-k350 (ENERGY STAR)Número de modelo: J4W47AA

    Hi again Andieco, It is good to hear back from you! If your computer is not freezing when you are referring to a white circle, there may be an issue with the touch screen software installed on your computer. To correct this, I suggest re-installing all of the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8), and then update the software by Using HP Support Assistant (Windows 8). If the white cursor will not stop blinking after performing the steps in the documents above, I recommend returning your system back to a previous restore point to before the issue occurred. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
    Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
    If the issue persists, please call our technical support by clicking the link below to get the support number for your region.
    www.hp.com/contacthp/
    I hope this helps!
    Regards

  • A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

    A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

    Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
    For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

  • Unable to update when executed, table gets lock Execution does not stop Execution even for an hour

    Following is my Query unable to update when Executed table gets lock Execution does not stop even for an hour.
    update Employees 
          set Status = 'Close'
          where statusid IN (select statusid 
                                             from MyView 
                                              where DownloadedDate ='2014-07-27 00:00:00.000'
    here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid 
    i tried in various ways but not able to solve, statusid  column have no index on,  i tried using cursor but it does not work.
    plz let me know how to solve this Issue, THANKS IN ADVANCE.

    Hello,
    You should better post your question to a more related Forum, like Transact-SQL or SQL Server Database Engine; this Forum is for samples & community Projects.
    Have you checked the execution plan if indexes are used?
    You could update the data in chunks, e.g. 10.000 rows per execution. For this you have to add a TOP clause and a filter to update only those, who are not updated yet.
    update TOP (10000) Employees
    set Status = 'Close'
    where statusid IN
    (select statusid
    from MyView
    where DownloadedDate ='2014-07-27 00:00:00.000')
    AND Status <> 'Close'
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Unable to update, when executed table gets lock and Execution does not stop even for an hour.

    Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
    update Employees 
          set Status = 'Close'
          where statusid IN (select statusid 
                                             from MyView 
                                              where DownloadedDate ='2014-07-27 00:00:00.000'
    here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid 
    i tried in various ways but not able to solve, statusid  column have no index on,  i tried using cursor but it does not work.
    plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
    , THANKS IN ADVANCE.

    See also your other thread with the same question:
    http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Problems with Labivew 2013 / 14 install - Ni Variable Engine error and Labview does not close, processes do not stop when I run Vis.

    Hi All,
    I am hoping at all my problems are relateded to a problem I am experancing, when I look into my windows 7 (64bit) event viewer near every time I boot up I get an error regarding the NI Variable Engine which reads.
    The description for Event ID 0 from source NI Variable Engine cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    C:\Program Files (x86)\National Instruments\Shared\Tagger\ni_tagger_plugin_mxs.dll: Failure to load plugin: Unexpected Error: Unable to get the Interface from the plug-in.
    and a second which is the same apart fomr the last line
    Unable to load the MXS configuration plugIn: Failed to get MAX Configuration interface for Tagger: 0x80040318
    I have tried uninstalling all labview things and I have tried repairing all labivew programs. Along with this I got this error when I installed Labview 2013 so I thougth why not try 2014 and I still get the same problems. I also shoudl point out I use bot 32 bit and 64 bit versions of labivew. I have installed labview on many machines before but never encountered this problem. That being said this was a new clean windows install.
    Along with thiese errors labview heardly ever shuts down properly when I close the program it just freezes and needs forshed shut down.
    Apart form this I noticed that when I run any of my Vis which I have never had problems with in the past and I stop the program somtiems processes keep using CPU such as "lktsrv.exe"
    I really need to get this sorted out because its morstly the crushing and processes not stopping which is rather annoying.
    I shoudl also say that these problems are both in the 32bit and 64 bit versions of labview not difference. and no difference if its 2013 or 2014
    Cheers

    Hi GajanS,
    Thanks for your reply sorry I havetn noticed anybody had replied as I stopped hoping for any responce before then.
    I have attached a screenshot of the four processes that seems to be giving me a problem.
    I have actually managed to find the program causing labivew to crash was in fact my antivirus software which I have now removed and have no more problems with labview crashing on shutdown.
    After removing it I tried the repair feature again for all my labview programs but sadly the one persistant problem remaining is still the four processes using around 13% processor each. I have found out this happens sometime after booting up regardless of if I run labivew or not. So it does not directly seem related to the running of any labview applications but rather a bug in the labview software.
     the processes are:
    lktsrv.exe
    tagsrv.exe
    nidmsrv.exe
    lkads.exe
    as shown in the task manager.
    I would relaly help if I can get this sorted out.
    Cheers
    Attachments:
    Screenshot 2015-03-24 21.50.00.png ‏12 KB

Maybe you are looking for