Cursor out of focus after error message

Hi,
We have build an application using forms 6i.
When using the application sometimes after getting an errormessage in a form the cursor stays in a field( after acknowledging the message) and can't move to another field. Also navigating to a poplist shows the values but when releasing the mousebutton it jumps back to the original field.
I can't reproduce this behaviour at will but it just sometimes occurs. Nothing helps but stating the browser again.
Has anybody experienced this behaviour?
Does anybody have any clue where to look?
Regards,
Joshua

Check these things before you do anything with your system:
*How is the drive formatted?* If it's FAT32, that's the problem and you will have to reformat the drive as Mac OS Extended to use it with Final Cut Express. But make sure you *back up your files first*, because reformatting erases the entire disk.
*How is the drive connected* - Firewire or USB? If Firewire, are there any other Firewire devices connected, especially a camera. If so, disconnect the camera.
What is the exact make & model of your external hard drive?
Are you using this external hard drive as a *Time Machine backup drive?* If so, you should *turn off* Time Machine before you export to this drive. Actually, you should not use a TM backup drive at all for video projects.

Similar Messages

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

Delivery gets created in VL01N - Return scenario even after error message

Hi,
I am having following issue explained in details in steps -
We have a service return scenario and following steps have been followed in ECC.
Material code used in this case is batch managed material.
Step 1 u2013
We have created a sales order(VA01) with document type ZRE(Itu2019s a kind of return order). This return order actually coming from CRM.
Step 2 u2013
We are creating delivery using VL01N transaction for return order.
Step 3 u2013
We avoid giving batch number in VL01N and try to save the delivery document. System prompt error saying u201CEnter batchu201D. Subsequently we press return keys to cancel the error message and try to come out of the transaction.
Step 4 u2013
Instead inputting batch number, we try come out of the document creation step.
Step 5 u2013
We go to document flow button of sales order and we could see the delivery created although we came out of the delivery creation process after the error message, without saving the document.
Also note instead of coming out of the document creation, if we again try to save the document, system throws update termination with a reason saying u201CError info... ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPRECu201D, which is quite obvious as system has already created the delivery and we are trying to create / save the document once again in VL01N
We are in dilemma now.
What is the cause of this abnormal behaviour? I don't know.
Any one experienced this, feedback is appreciated,
Regards,
Dipak

Hi,
The SAPSQL_ARRAY_INSERT_DUPREC error is not bothering me much.
My worry is once "Enter batch" error message comes, I am not interested to create the delivery any more.
So I come out of the transaction by pressing return key.
Now when I press return key, system gives me the delivery number, this should not be the case as message given was an error message.
If I go to the SE16N, I could see the delivery number in database.
Also system prompts me to save the delivery which I am not interested to do, just I want to come out after error message.
What could be the reason, I don't know. Ever after error message system gives you the delivery.
Which is very strange.
Any input is apprecited,
Regards,
Dipak

Edit screen after error message in module pool

Hello Experts,
In our scenario ,we have some checks over inputs given in a table control of module pool screen.Requirement is that after error message we need to display that record of table control in editable mode.
Thanks.

Thanks for the reply...The issue was resolved by dispaying information message and using EXIT to stop program flow.

My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any

Ooops I put the lot in the strap line!
My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
I would be grateful for help!! Obviously...

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

HT4623 my iphone froze up after error message

my iphone froze up after error message and i am now unable to restore. showing usb connections with arrow to Itunes. how do i fix this?

If by the "starting screen" you mean the Apple logo, then your phone is coming across a software issue that prevents it from finishing it's boot sequence. You will need to replace the software and firmware on the phone to get it back up and running. Doing this will also remove your data from the phone, so hopefully you have synced recently.
To put your phone into DFU recovery mode:
1. Make sure your phone is connected to a computer with iTunes on it.
2. Hold down the sleep/wake button and home button at the same time for 8 seconds.
3. Let go of the sleep/wake button and continue holding the home button.
4. If successful, the phone's display will main black and a dialogue box will appear in iTunes stating thet it detected a phone in recovery mode.
5. Click OK, then click Restore.
After that the phone should be up and running and you can sync your content back.

HT4863 I composed a response to an e-mail that came into my iCloud mailbox. When I sent it out i received an error message. Will I be able to retrieve the e-mail I composed? If so what are the steps. It is not in my drafts.

I responded to an email thread on my Macbook Air iCloud account. Shortly after sending it i received an error message regarding settings. When I went to close the error message I was unable to find the e-mail I composed. Is there a way to retrieve it? If so, How??

Hi LeeJennie,
If your email didn't go out, you please check other mail boxes as well, including checking online with a browser.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
If your recipient doesn't receive your message
2. If you're using OS X Mail or accessing your iCloud Mail (icloud.com/mail) using Safari or another supported web browser, check your Drafts, Sent, and Outbox mailboxes:
Try also doing a search in Mail for the content.
Take care,
Nubz

Out of Memory! error messages

For a few months I have been getting a series of about 40 error messages when Logic 7.2.1 is starting up. They appear at the end of the startup process. I dismiss each one and at the end of all the messages, Logic appears and seems to work then with no problems. The messages are:
Out of Memory!
Out of memory! Couldn't insert or delete data
Couldn't creat Region
Out of memory! Couldn't insert or delete data
These appear with Logic in Native mode and also if I add the DAE audio engine.
I have trashed prefs. I have cleared out all plugins. The error messages do not go away.
Does anyone have any ideas as to why these error messages are appearing?

Is there a specific song it's trying to load on
startup? Maybe that's corrupted?
Thanks for the suggestion. There is no Autoload song to load in any of the folders that might have it. The errors appear after I have trashed ALL Logic preferences and Restarted the G5 and then started up Logic.
If you hold down the Option key near the end of Logic starting up (while it is checking MIDI), this causes Logic to appear without any song loaded. In this case I get no memory error messages. If I then select File / New and load in a generic new song, the error messages appear again at that point.
So, I think you are correct in thinking it relates to the song that is being loaded but why the generic new song should cause these error messages is not clear to me yet.

Report terminates after error message

Hi all,
     i had created an alv report ,grid display.I am using a few error messages frm a message class.Whenever i am performing an operation AFTER the error message is displayed,( like clicking back button,clicking any push button,when trying to debugg using /h..ect..) the entire transaction exits/ it comes out /terminates...pls help me on this
.... i am even unable to debug using /h...
Regards,
Devendran
Edited by: Paramaguru devendran on Mar 21, 2008 7:13 AM

Hi
I think it doesn't make a sense to set a warning or error meesage in the user_command of ALV, usually it's better to use an information message and exit from the routine (method):
METHOD handle_user_command.
    IF <velidation>.
       MESSAGE IXXX(YY).
       EXIT.
    ENDIF.
ENDMETHOD.
In this way the program will be out from the method and doesn't run the abap code after the message and back to the ALV.
Max

Navigation to another view after error message appears

Hi,
I have a requirement to enhance a the FPM component FITE_VC_RECEIPTS Receipts for Expense Report , to display the messages according to the expense type. These messages are for itemization. If an error message appears, i need to click on
enter itemization and enter to that view,itemize that particular expense type and then the error message should disappear after itemization is done.
But presently if error message appears i am unable to navigate to the itemization view as the navigation_abort is set 'X' and also the rv_response = 'CANCEL' in FITV_FPM.
Please suggest as how to enhance the component so as to recify the error messages and navigate to the itemization view.

It is bit complicated to advice without seeing your source and understanding the problem.
In webdynpro i would have done something like this
enhance in the process_event method and return ev_result - defer. (failed status is equivalent to you cancel and navigation_abort ).
You can try to enhance like this and try out changing the values for navigation_abort and rv_response.

Action with out validation still showing error messages

Hello, I have a save action on a PopUp thats has the "with out validation" checked but still the error messages are shown... the problem is that y want to validate the fields by myself, not let the framework do it.
The other question I had is, is there a way to show the validation messages from the framework into the popup? because there are showing in the main window.
Thanks.

the problem is the acceptable range is wrong or probably wrong. this is resulting in your download speed being lower than the acceptable range and therefore shown in red
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Premiere Elements 12 does not start after error message: display driver is incompatible

After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?

Moonkeys25
Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
Moving forward...
If you issue was specific to the display card error that you have been getting then probable conclusions
a. the ADM Radeon H7610M driver version is not up to date
or
b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
https://www.piriform.com/ccleaner/download
When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
Thanks.
ATR

Bridge CS5 freezes after error message...."The operation could not be completed, there is not....

Error - The operation could not be completed. Not enough storage is available to complete this operation.
After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle). However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available. I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
Here are some of the things I have tried:
reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
-What else can I try?
-Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
Please help, I am willing to try anything to get this to work. It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine......
Thanks in advance for any advice or insturctions you may offer!

Dear Customers,
I am Baichao Li, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
                Select "Use Custom Rules",
                Browse to a custom dump file folder,
                Check "All Exceptions",
                Check "Ignore Exceptions that occur inside Kernel32.dll",
                Select "Mini Dump Type" to "Small"
                Select "Save Mode" to "Cyclic Saving 5 times"
                Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li

Screen exit Payment document saved when press enter after error message

Hi All,
I have created a screen enhancement for payment document WZR1.its in additional data tab under header details.
Here i should populate a error message when user save the payment document without entering values to custom screen fields.It works fine with Function exit LWZRE017 . It populated the msg and the screen is disabled but after when i press enter button the document is saved and created.
please let me know how to stop saving the document without entering values in custom fields.
Thanks,
Arun kumaran.
Edited by: Arun Kumaran on Mar 4, 2010 12:09 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:26 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:43 PM

I found the fcode when enter is 'ENT1' it is from standard screen program.
I populated the same message when UCOMM = 'ENT1' still not working.
ARUN KUMARAN.
Edited by: Arun Kumaran on Mar 5, 2010 1:36 PM
Edited by: Arun Kumaran on Mar 5, 2010 2:11 PM

After error message has been displayed , unable to check multiple selction.

Hi experts ,
I have developed an interface tosend data to thrid party tool. But there is a single issues with it.
Whileproviding inputs at selection screen the selection-screen fields are not validated properly.
Could somebody please correct me on this :-
I have a validation check for a select-option with NO Intervals.
Any incorrect value in the Select option then an error message displayed . Now if there are multiple values in the Selct-option multiple selection then also the error popos up showing the wrong entires . But when i try to change again i.e click on multiple selection then it doesnot allow the user to enter and correct those entries.
Could you please let me know the best posible way to check teh above scenario ?
Thanks
Kylietisha

Hi,
try to put our validation logic in the AT-SELETION SCREEN event so that it will allow you to crrect the values in the selection screen option after displaying of the error message.
to check the mutiple value validations, try to get the entries from the validation table into an iternal table. if internal table contain a vaue then there are some valide entres present in the given input vaues. if table is empty then display the error message.

Cursor out of focus after error message

Similar Messages

Maybe you are looking for