Cursor problem in windows 7

I have installed windows 7. My cursor often goes out of the screen. for eg: if I am seeing some pictures, before I am moving to another pic the cursor automatically goes away from the window. Again, after I click into the window it  appears. it is
really difficult for me while doing some programming . Somebody please help me in this case 

Hi,
What software do you use to view the pictures? Windows Photo Viewer?
Also, please check if there is 3rd software running in the backgroud, such as
AutoHideMouseCursor, etc.
I recommend you to scan your computer with Malicious Software Removal Tool.
http://www.microsoft.com/security/pc-security/malware-removal.aspx
Andy Altmann
TechNet Community Support

Similar Messages

  • Hardware Color Cursor Problem in Windows 8.1

    I have 2 issues related to the cursor on Win8.1 with 2 display adapters.  It seems Windows 8.x problem.
    Issue #1, Primary display adapter is using hardware color cursor and secondary adapter is software cursor. It will have cursor left over on the secondary screen when the cursor is moving from
    secondary screen to primary screen.
    Issue #2, Primary display adapter is using hardware color cursor and secondary adapter is software cursor. There will be 2 cursors on the left upper corner of the primary display screen when
    dragging the cursor around the upper left corner of the primary display screen.
    So the problem seems caused by 2nd display adapter doesn't support hardware color cursor then will create these two problems.  
    If I switched to software cursor in the Control panel, then there will not have these problems. Also if both use hardware cursor, then there is no problem.  
    Can anyone help to confirm if this is the Windows 8.x bug or not?
    Thank you very much.
    Regards,
    Francis

    Hi Francis Fung,
    When checking in Mouse Properties, I couldn't find any settings that would allow me to change to software cursor under any tabs like Buttons, Pointers, Pointer Options, Wheel and Hardware(reference)
    Some specific mouse would have its own functions, make sure that we follow the instructions to configure the settings, for the two adapter issue, please also consider seek help at the manufacturer side and see if any further help would be offerred there.
    Thank you for your understanding.
    Best regards
    Michael Shao
    TechNet Community Support

  • Textbox Cursor Problem in Windows 7 - IE11

    I have IE11 / Windows 7. I've a problem with the cursor in IE11 because the text cursor appears only in double click. In an html text box, suppose I need to enter a word. For that I've clicked the mouse on the text box. But cursor not appears in single click.
    Cursor only displayed in double click.
    Anybody knows what is the problem. This problem only in windows 7 - IE11.
    Thanks for your help,
    Arun Chandran

    Hi,
    Please include with your questions a link to the website (or an example) with which you are having issues with. That way we can visit the site and investigate the issue.
    Normally the cursor appears in a textbox when it receives focus....
    this has occurred on every site I have seen... web site programmers can however alter that behavior.
    or
    Your settings for mouse clicks has been changed...
    Start>Control panel>Mouse
    or
    Your mouse driver is faulty/out of date and requires an update.
    Start>Control Panel>Action Center or run a Windows Update.
    Post consumer questions about IE to http://answers.microsoft.com (Help>Online Support menu from IE)... Include with your questions links to any website that you are having issues with.
    Thx.
    Rob^_^

  • Setting Cursor - For a window and application wide

    Hi,
    Can somebody please help with a cursor problem ? I am not able to set the busy cursor for a frame when the application is doing some work. I have tried many methods of doing this (some of them from these forums...) but still I am not able to make this work.
    1) setting the cursor before doing the work and resetting after the
    work doesnt work.
    2) setting the cursor for the window by calling
    Window window = SwingUtilities.windowForComponent(getRootPane().getGlassPane());
    window.setCursor(Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
    This works but the events are not blocked by the frame i.e if i
    click on any part of the window like a button or something, that
    event is fired after the work is done. So this is not good.
    3) created a glass pane for the window and blocked all the events. Then
    set the cursor for the the glass pane. This does not work either
    since the event thread is doing the work. So had to create another
    thread to do the work. This works but when the cursor is reset back,
    it doesnt reset. I have to move the mouse a bit to reset it. So this
    is not good either.
    4) created a work around for the cursor by creating a modal dialog box
    saying "Processing..." in the event thread and doing the work in the
    worker thread. The worker thread posts an event to dispose the
    dialog box after the work is done. This works perfectly though it is
    still not good because the cursor is not showing busy. Because of
    the modal dialog box, the user cant do anything in the application
    which is exactly what i want. Is this ok ? Can somebody provide any
    other work around for this ?
    5) Also I have another question for you guys. In the worker thread if i
    do something like updating the gui etc., it takes a lot of time
    almost 10 times more than when the work is done in a single threaded
    environment. Is this because of the communication between the worker
    thread and the event thread ? If I do only data related work not gui
    work in the worker thread, this is fine.
    I am new to Swing, so somebody please explain to me if they can.
    My environment is JDK 1.1.7, Swing 1.1 on Sun Solaris 2.5.1. Is this because I am using old versions. Is this resolved in the newer versions like 1.3 etc ?
    -Vijay

    moetunes wrote:I thought a
    chmod u+rw /path/to/.conf
    chmod go-rw /path/to/.conf
    would set the file to be read only by the user that owns it.
    That is all true.  The problem is the need to give a user the ability to run a program that has secrets that should only be visible by root.  If you give the user ownership, they cab see the keys to the kingdom.
    For example, you may want to allow a user to connect to an arbitrary wireless access point.  Generally, this is a privileged operation -- you want to give them permission to do it, but don't want to give them ownership.  You may also not want them to be able to see or modify the pass phrases.

  • Brush Cursor Problem

    Hello, I've been experiencing a weird brush cursor issue and I haven't been able to find anything online to fix it. 
    This cursor problem is different from the "chunk of cursor missing upon resizing" issue that so many people have had.
    In Photoshop, when I resize my brush using the "[" and "]" keys, I will  often see my cursor get distorted. It will very briefly appear to the  right of where the cursor should be and it will look kind of oblong.  Another distortion that occurs is the cursor very briefly becomes a half  circle that is a bit larger than the cursor should be. This usually  happens between 150px and 250px size and occurs with all brushes.
    I'm also experiencing a distortion when I move the brush cursor over to  the panels section. This distortion appears (again, very briefly) as a  broken up horizontal line just above the brush cursor. Also, within this  line, I can see the regular pointer arrow cursor. Sometimes I see two  arrow cursors within the line and other times just one. This happens  with all brushes of size 500px or less.
    I have updated my video card drivers to the latest version and I have updated my Photoshop with the latest patch. 
    I use Photoshop CS5 64-bit, Windows 7 Home Premium 64-bit, and a Toshiba  Satellite L655-S5157 with an Intel(r) HD Graphics video card. 
    I heard about someone with a problem somewhat similar to mine and he  said he fixed it by manually deleting his preference files. He had tried  doing the shift+alt+ctrl on startup to delete his preference files, but  it didn't fix the bug (I tried it too and it didn't work for me  either). 
    I would like to try manually deleting my preference files, but I just don't know where they are. 
    Thanks for any help.

    For you (or anyone reading this thread), try to get a machine with an embedded ATI or nVidia display interface.
    Intel seems to be coming out pretty strong in the laptop market because they offer embedded GPUs in their chipsets, but Intel has a LONG way to go to get their OpenGL implementations up to par.  What I don't understand is that they've been known for having relatively poor OpenGL implementations for years now.  It's not like they're a small company who can't afford to fund a good development staff.
    To this day I'm still fighting Intel-specific problems seen by people running my own OpenGL software, where ATI and nVidia implementations are rock solid.  Stuff that's documented - such as handing off an OpenGL context between threads - just fails utterly with an Intel driver/GPU.
    -Noel

  • Custom Chrome and Custom Cursor problems

    Howdy, I've got a small problem with chrome and cursors.
    I've created my main application window with the chrome set to Custom-Opaque
    I've got my custom frame, window controls etc. all wired up and working nicely.
    I've got my cursor manager swithing the cursor to resize-arrows when you get close to the window edges.
    Here's where I run into a couple problems:
    The cursor is only visible within the bounds of the window--unlike the system chrome which gives the resize cursors outside the window bounds. Any way to use the system cursors? or another idea?
    When I resize the window, the custom cursor stays right where the MOUSE_DOWN event occured, and doesn't move with the mouse anymore. The window does resize though... Any suggestions?
    Thanks in advance!
    -Ted

    I have the same problem but I extend the WindowsLookAndFeel. I know of a way to fix this but it seems unbelievable that this is the only way. Here is how I did it: In your custom look and feel class add this method. Call the super version and then add the icons that are missing to the UIDefaults table. Of course your code would have MetalLookAndFeel where my example has WindowsLookAndFeel. Hopefully someone will come up with a better solution. I plan on raising a bug in the bug parade for this.
    protected void initComponentDefaults(UIDefaults table)
              super.initComponentDefaults(table);
              table.put("DesktopIcon.icon", LookAndFeel.makeIcon(WindowsLookAndFeel.class,"icons/DesktopIcon.gif"));
              table.put("Tree.openIcon",LookAndFeel.makeIcon(WindowsLookAndFeel.class,"icons/TreeOpen.gif"));
              table.put("Tree.closedIcon",LookAndFeel.makeIcon(WindowsLookAndFeel.class, "icons/TreeClosed.gif"));
              table.put("OptionPane.errorIcon", LookAndFeel.makeIcon(WindowsLookAndFeel.class,"icons/Error.gif"));
              table.put("OptionPane.informationIcon", LookAndFeel.makeIcon(WindowsLookAndFeel.class,"icons/Inform.gif"));
              table.put("OptionPane.warningIcon", LookAndFeel.makeIcon(WindowsLookAndFeel.class,"icons/Warn.gif"));
              table.put("OptionPane.questionIcon", LookAndFeel.makeIcon(WindowsLookAndFeel.class,"icons/Question.gif"));
              table.put("Tree.leafIcon", LookAndFeel.makeIcon(WindowsLookAndFeel.class,"icons/TreeLeaf.gif"));
    Hope this helps.

  • Installation problem on windows server 2008 r2 datacenter edition 64bit

    hi
    today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
    because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
    so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
    this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
    why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
    thanks for feedbacks!
    regards, jan

    > no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
    If you take the time to give exact error messages then someone will be certainly able to help
    > on windows server 2003, there are NO problems.
    Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
    I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
    Markus

  • Oracle database 11g release 2 installation problem on windows 7 (64-bit)

    First of all my windows is not genuine, but on my friend's desktop oracle download and installation  worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
    (Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
    it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w,  deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
    and
    then
    I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)"  from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
    The values I filled for
    1) Global Database Name :  orcl
    2) System Identifier : orcl
    3) I chose common password for both SYS and SYSTEM
    4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
    5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
    6) Then after few more nitty-gritty clicks, we are set to go !
    Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
    Username : sys/ as sysdba
    Password : (its the one you created in step 3 stated above )
    After this you are ready to write your first SQL command.

    Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
    Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
    About Database Administrator Security and Privileges

  • Lightroom 3.2 Installation Problem on Windows 7 64-bit

    Lightroom 3.2 Installation Problem on Windows 7 64-bit
    I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
    While copying the extracted program files the following error message appears:
    An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
    I found out that other users had the same problem, and couldn't find a solution.
    Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
    Thanks for ideas to solve the problem.

    Thanks for your advice, Mr. McLion.
    I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
    Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

  • Problem on Windows 7 Home Premium cant open program for using codes like visual studio 2012

    I have problem my windows 7 Home Premium because of visual studio 2012..I can't open even in several times, I don't know what happen, and sometime it is so low to process whenksn it to open my laptop..Why is that pleas do reply..ASAP! tha

    Hi,
    According to your description, it seems like VS itself problem, you can try to repair this program through Control Panel for test. If no use, it would be better to post your question at VS forum for further assistance.
    Contact VS forum:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
    Roger Lu
    TechNet Community Support

  • TS3918 I am experiencing this problem on Windows 7 64 bit.  Any suggestions would be appreciated.

    I am experiencing aniTunes reinstall problem on Windows 7 64 bit.    I have uninstalled the iTunes product and reinstalled 11.02 for windows 7 64 bit but can't get iTunes going again.  The first error message I get is: "The file "iTunes Libirary.itl" cannot be read because it was created by a newer version of iTunes".  The next error message I get is:  "There is a problem sending the command to the program."  Any suggestions on what to do next would be appreciated. ( I would have posted this in Windows area had I been given a choice.)

    I believe that message can sometimes be a sign of a corrupt library file, unless of course you've tried to downgrade to an older build of iTunes. Restore it as described in this post.
    tt2

  • CPU Overheating problem on Windows 8.1 Pro (installed with BootCamp)

    There is a really important overheating problem on windows 8.1 (installed with bootcamp) even i do nothing Cpu is 50-60-70 Celcius degrees. This is really annoying problem. Most of users necessarily need windows OS for using third part programs that doesnt exist on OS X platform. I think this problem is important and has to be fixed as soon as possible.
    My brand new Mac:
    MacBook Pro (Retina, 15-inch, Mid 2014)
    2,5 GHz Intel Core i7
    16 GB 1600 MHz DDR3

    I have the same problem on macbook pro retina 15 late 2013 - top configuration

  • Problem with windows and my monitor in after effects

    HI . before any thing excuse me for speeking english.
    i have a problem with windows in after effect in my monitor
    my monitor is 15.6 and resolution is 1366*768
    for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
    Thanks.

    Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
    Mylenium

  • Hi anyone having a problem with windows 7 and itunes

    Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

    Yes, I am also having trouble with my windows 7n.  I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

  • Problems with Windows XP SP3 in Boot Camp

    Hi,
    I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
    Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
    Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

    Problems with Windows XP SP3 in Boot Camp
    Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

Maybe you are looking for