Curve 8250 - PC and Device Software Do Not See Memory Card

Curve 8250 (Unlocked), v5.0.0.1036 (Platform 5.2.0.104), no provider - no SIM card installed. 16 GB MicroSD card installed and formatted and shows total space at 14.9 GB. Phone sees the card and puts camera shots on it. Have Media Card Support On, Mass Storage Mode Support On and Auto Enable Mass Storage Mode When Connected Yes. When MicroSD is removed from phone and put is card reader, the format and files look fine. When connected by USB to computer, the BlackBerry Device Software shows the phone memory, but no MicroSD and Windows 7 Disk Management shows Disk 1 Removable 14.91 GB Online with assigned (D), but with format of RAW (always asks to format card)? Have tried everything I can find online with no success. Hopefully, this is not because no SIM card installed. Please let me know why I can’t see the MicroSD correctly when connected via USB to phone. Thanks.

Unfortunately, the Error 99 code is not a specific error code and can indicate a number of issues, such as battery power issues, shutter issues, etc. The more I looked into the 350D and memory card compatibility the more I think that may not be the issue. In all honesty, I'd contact Canon support as you may have to send your camera in for repairs.
Before doing that, though, I'd try this. Restart your camera, wait a few moments then set the camera's power to Off and remove the batteries. Open the memory card slot cover to make sure the memory card is securely set in the card slot, then reinsert the batteries and turn the power to On. Hopefully that will do the trick, and if not I'd update the firmware for the camera as a last resort and see if that rectifies the problem. If not, contact customer support.

Similar Messages

Canon EOS 350D does not see memory card--I've tried two different ones. Will not format--err 99

My EOS 350d has not worked since it was shipped to my daughter. Bought new memory card and camera still does not recognize that a card is in it. When connected to computer I could see card but it had 0 used memory and 0 memory available. Now it does not show at all. Using canon software get same response--no memory card. Have tried with two different memory cards. Even formatted one card on PC, still nothing. Any ideas what to try next--pins look like they are all in correct place.

Unfortunately, the Error 99 code is not a specific error code and can indicate a number of issues, such as battery power issues, shutter issues, etc. The more I looked into the 350D and memory card compatibility the more I think that may not be the issue. In all honesty, I'd contact Canon support as you may have to send your camera in for repairs.
Before doing that, though, I'd try this. Restart your camera, wait a few moments then set the camera's power to Off and remove the batteries. Open the memory card slot cover to make sure the memory card is securely set in the card slot, then reinsert the batteries and turn the power to On. Hopefully that will do the trick, and if not I'd update the firmware for the camera as a last resort and see if that rectifies the problem. If not, contact customer support.

I updated to iTunes 10.7 and now iTunes does not see my iPod Touch. It says the Apple Mobile Device USB Driver cannot be installed.

I updated to iTunes 10.7 and now iTunes does not see my iPod touch. After the update I got a message that the Apple Mobile Device USB Driver could not be installed. I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem. I have followed the suggested fixes in Apple Support. Any suggestions? Thanks!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Finger print sensor and SimplePass Software is not working

Hey there,
I have a HP Pavilion dv7-6c95dx and the finger print sensor and SimplePass Software is not working. I am unable to find the relevant drivers/etc from the HP website. Any advise would be appreciated. The device was purchased in the USA.
Thanks.
This question was solved.
View Solution.

Hi:
I believe this driver from the dv7t-7000 will work as well as the security software to register your fingerprint.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103013-1&cc=us&dlc=en&lc=en...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117897-1&cc=us&dlc=en&lc=en...

HT5701 Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Open  > About this Mac, and tell us what OS X version you have. If it's 10.8, reinstall OS X 10.8.3 > http://support.apple.com/kb/DL1640
If, after reinstalling the update, you still can't use Safari, hold Command and R keys while your computer is starting and reinstall Lion or Mountain Lion

I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

Where can I find FF 3.01? My users have 3.01 and my software is not running correctly on the latest FF versions.

My Javascript/HTML code works fine on my Ubuntu box with FF 3.6 but the clients have to use FF 3.01 (compatibility problems with other software preclude them from upgrading to a new FF version) and the software is not working.
Without having access to FF 3.01, I can't debug the software.
I've been unable to find FF 3.01 for Ubuntu. Where can I find it?

See [[Installing a previous version of Firefox]]
If you are going to use Firefox 3.0, you should try the last version 3.0.19 rather than 3.0.1

PulseAudio does not see my card (and I have to use PulseAudio)

ALSA works fine.
To be specific, pavucontrol does not see my card (only sees my ATI HD5700 graphic card as HDMI output under "output")
Here's aplay -l:
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Card info
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Giga-byte Technology Device a002
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
Interesting thing that happens:
[bogdan@galaxy alsa]$ aplay -Dplughw:0,0 -fcd Front_Center.wav
aplay: main:660: audio open error: Device or resource busy
The reason I have to use PulseAudio is stupid skype that crashes on start without it installed.
Help?

Yep, that's the one I have installed. However it looks like the problem fixed itself. The sound now works, HOWEVER, I have a 5.1 system and only center, rears, and the sub works. Left and Right (main) don't. pavucontrol is set to 5.1 output. When I turn down the individual volumes of main left and main right, the center speaker is the one that actually is turned down. It's as if PulseAudio thinks that center speaker somehow represents both main left and right.

I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

Did you try to change the location in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

Trying to install MS Office 2011 for Mac SP 2 on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Trying to install MS Office 2011 for Mac SP 2 (14.2.0) on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Thanks Kurt! I had tried all that and had tried closing both programmes from the application monitor, but SyncServices Agent refused to close. I tried closing Launchd which is their mother application, but that just caused the screen go go blank. In the end the two programmes let themselves be closed next time I tried the installation process so all was well. Thanks for your help!

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

I upgraded from the app store. It is actually quite awhile ago so I do not remember how. I think I used a thumbdrive to create some type of file. No I do not have any backups. My iLife CD is nowhere to be found because this is a very old macbook pro that I've had for a couple years.
Thanks for taking the time to help

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
Anyone can help me?
Thank you, Claudio

Hi Russ, Thank you for your reply!
System Spec:
2x2.26 Ghz QUAD-CORE
12 GB RAM 1066 MHz DDR3
I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
Everything all right in iMovie.
I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
I do hope you may suggest something, I'm getting crazy!
Thank you in adavance
Claudio

Downloaded ios8 to ipad mini and know I do not see my camera icon

DDownloaded ios8 to iPad mini and now i do not see my camera icon

It should be on the top row. If not go to settings> general> restrictions> camera and make sure the button is green.

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.

Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
but air port still does not see it.
Not sure what you mean by "air port" here.

Curve 8250 - PC and Device Software Do Not See Memory Card

Similar Messages

Maybe you are looking for