Curve 8330 not connected to computer

I have the blackberry Curve 8330v 4.5.0.186 (Platform 3.4.0.59). For hours I have been trying to get my computer to detect. I have downloaded the drivers, which you would need to do for any device. Specifically USB and Modem Drivers 6.0. It shows up in my Device Manager Under Ports : Virtual  Serial Port v2. I also have installed Blackberry desktop software, which excutes just fine. However, my problem appears to be all though all is installed and the phone is connected to my computer, the computer isn't detecting it. When I plug it into the computer the phone lights up indicating activity, but that's the only thing that happens. The computer doesn't give me my typical "new hardware found" alert or anything remotely closeto suggesting that there is connectivity. So, after failed attempts in many areas, even trying to connect via bluetooth. My ASUS model X401U notebook running Windows 7 does not have bluetooth capablities. SO, I know there is nothing wrong with the ports as I can move my plug and play mouse to any of them successfully. My phone does not have the storage card in it , but that should not stop my computer from detecting. The cord I am using MAY be the culprit, but even so it works with another device (specifially ran from a ps3 controller to the ps3). So the cord does work. You would think if it were the cord, that it wouldn't allow the phone to light up when plugged into the computer. At this point the phone wont even try to charge when plugged in. Anyone have any suggestions?

Hi and Welcome to the Community!
Here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed 
KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Ipad not connect with computer. error number (0xE8000084), ipad not connect with computer error number (0xE8000084)

    ipad not connected to computer. erreo number (0xE8000084)

    Hello Mohamed Abdo,
    It sounds like you are unable to connect your iPad to the computer because you get this error code when you try. I would use the troubleshooting for these types of errors from the following article:
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Start with these steps, and there are additional steps in the article if you need them:
    1. Restart your computer.
    2. Install the latest version of iTunes.
    3. Verify that your computer meets the minimum system requirements. iOS devices require the following minimum version of Windows:
    Windows XP Service Pack 3
    Windows Vista
    Windows 7
    Windows 8
    4. Download and install any available software updates from Microsoft.
    5. Connect the device directly to your computer; not to an external USB hub. Find out if your computer has USB 2.0 ports.
    6. Check that the Dock Connector or Lightning Connector on both the device and cable are clean of any lint or other debris. If possible, connect your device using a different Apple 30-pin to USB cable or Apple Lightning Connector to USB cable.
    7. Disconnect other USB peripherals from your computer, with the exception of your keyboard and mouse. After disconnecting these peripherals, restart your computer, connect your device, and open iTunes.
    8. Connect your device to a different USB port on your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • OfficeJet 6500 709e says it's not connected to computer

    When I press the "wrench" button onmy printer, then press something to get help on anything, the LCD dispay shows "Not connected to computer"
    Yet, I can print fine using my computer.
    I have a wired setup.
    How can I get the printer to think it's connected to my computer?

    What is the exact wording of the error message?
    What are you trying to do?
    The USB connection provides not internet connectivity. The iPod can only connect to the internet via wifi

  • HT201412 Hi , my Ipod touch4 not turning on even not connecting to computer... How can i fix this problem !!!! plz

    Hi , my Ipod touch4 not turning on even not connecting to computer... How can i fix this problem !!!! plz

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • Unable to start T-sql Debugging . could not connect to computer'.'.the workastaion service hase not been started

    hello
    when i excute code in sql server 2008, this error appear:
    unable to start T-sql Debugging . could not connect to computer'.'.the workastaion service hase not been started.
    what do i do?
    thanks

    hello
    when i excute code in sql server 2008, this error appear:
    unable to start T-sql Debugging . could not connect to computer'.'.the workastaion service hase not been started.
    what do i do?
    thanks
    Hello,
    This forum is to discuss and ask questions about the Debugging tools of
    Visual Studio, Visual Studio Profiler tools, and Visual Studio Ultimate IntelliTrace, it seems like that your issue is out of the support range which is regarding
    Using the Transact-SQL Debugger, if that is the case, I would recommend you post this issue in the following forum like this thread
    Unable to start T-SQL debuging.
    SQL Server>Transact-SQL
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Ipod touch screen shows connecting to itunes when not connected to computer and will not go to start screen  also will not connect to itunes get message that passcode needs to be entered but cannot get to that screen on ipod

    ipod touch shows connecting to itunes on screen even when not connected to computer.  cannot get to start screen to enter my passcode

    Place the iPod in recovery mode to bypass the passcode (and essentially erase your iPod)  and then restore via iTunes on your computer.

  • Curve 8330 not being recognized by the Mac Blackberry Desktop Manager . . .

    I just downloaded the Mac version of BDM.  It's a long time coming, but I'm glad that it works.  I have a Pearl that was easily recognized by the software and easily synced with all my data.  However, I also have a Curve 8330 that will not sync.  In fact, when plugged into the USB port, the BDM doesn't even see that the 8330 is plugged in, it still sits there asking, "To beging, connect your device to your Mac using the supplied USB cable."
    Any suggestions on what to do?
    Thanks.
    UPJ

    I would suggest, first off, rebooting the Curve.
    With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. 
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Curve 8330 Not able to Sync with my Gateway Laptop Windows Calendar...PLZE HELP

    I have a Curve 8330 Desktop manger is v4.5. My operating system is Vista. This is the first time that I have attempted to sync my Windows Calendar with my BB 8330.
    I have looked at other threads and can not find my solution.
    I have logged into my Desktop Manager and have gone thru the sync wizard but when I select to sync my calendar the option for Windows is not listed; the items listed are ASCII Importer/Exporter and Yahoo.
    On my device I have 3 personnel email account set up; my cox.net email and 2 gmail accounts.
    My laptop internet service provider is Cox in which I believe that my Windows Calendar is connected to.
    I HAVE NOT HAD ANY SUCCESS ON SYNCING MY WINDOWS CALENDAR....PLEASE HELP....
    Thank you!!

    Hi and welcome to the forums prscorpsag1122!
    Please see this link: http://supportforums.blackberry.com/rim/board/message?board.id=8300&thread.id=51310
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Officejet 4630 will not connect to computer to scan.

    When I first got the product it scanned a few times but now will not connect to my computer to scan even after re-downloading drivers and entering a printer claim code.

    I would recommend using the HP Print and Scan Doctor to help diagnose and resolve your connection issue.
    Say Thanks by clicking the Kudos Star. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Ipod does not connect to computer or show up in itunes

    I plug my ipod into the computer and it does not show up in itunes. It worked when I first bought it 3 months ago and suddenly will not connect...
    I have tried other computers as well as rebooting and then connecting but still nothing...
    It is incredibly frustrating. Any ideas?

    Same Problem. I have a 4 year old 40G click wheel. all was fine until today. now when i connect to my PC i do not hear the audible tone and nothing happens except my iPod turns on but i do not get the "Do not Disconnet" message and my iPod does NOT show up in iTunes. also, it causes my computer to lock up and i have to turn off the computer and reboot just to use my computer. tried reset; tried the disk mode. still not working. it did this yesterday once and i reset my iPod and all was fine. today, that doesn't work. any ideas????
    HP nc6320   Windows XP  
    HP nc6320   Windows XP  

  • My iPad is Disabled and I cannot input my passcode.  how do i do that?  I have tried to connect to iTunes and it will not connect via computer connection as I cannot activate my iPad with the pass code.  what do i do?

    My iPad is disabled and I can not input my passcode.  what do i need to do?  I tried to connect to iTunes, but it will not allow me to connect via compute USB as I cannot input my passcode for the iPad. 

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/re-sync your content to it

  • IBook not connecting: Other computer has no problem

    We connect to the net via an ethernet cable using PPOE. We are not usually on at the same time, so we just unplug the cable from whichever computer is using it and plug it in the other. Never had any problems swapping the cable between computers when one of us wanted to use the net.
    Now my wife's iBook isn't connecting. My PowerBook has no problems, but when her iBook tries to connect, it says that authentication failed. When I ran diagnostics, it said that the cable was not plugged in or that it was not connected to a network.
    I've tried: repair permissions, turning it off and back on again, typing in ID/password manually, using the assistant, deleting Quicktime and prefs (saw this on a post), unplugging iBook and taking out battery for half-hour (had to reset time and date).
    I can share my connection via airport, but her Safari is SLooooooow and when I tried to do a software update on her iBook using this shared connection, it would not connect (lost network connection (-1005.) When I hit "Network Diagnostics", it all came back green: no problems.
    Any help would be greatly appreciated.
    Thanks.

    ok, the quicktime compatibility update (took several tries and about two hours to download) seems to have done the trick.
    fun fun fun.

  • My Zen Sleek Photo will not connect to compute

    I am extremely disappointed ! Despite being told yesterday that I need Microsoft Service Pack 2 installed on my computer before my USB would detect the player, I have successfully downloaded MS SP 2 and guess what ? It still says "your player is not connected" !!! Grrrr !
    220 down the spout !?Help ! Please !!?

    To: suzanneb
    I wonder if DM Guru's?solution might work for you.
    Good Luck!
    aismail
    I wonder if DM Guru's?solution might work for you.
    Good Luck!
    Message Edited by roger-conejo on 02-9-20060:3 AM

  • My IPOD is not connected but computer says it is

    I had a IPOD nano 2GB but I decided to upgrade to an IPOD 4GB so I can play videos. So far I am not impressed with it. On my old nano it was very organized. I had 2 playlists and and audioobok category. On my new IPOD I have a million categories and I can't seem to get it organized. I have music I don't want and can't seem to delete( songs aren't highlighted) I can't add a new playlist. So far I have music everywhere. I can't seem to add either I can't put the video where I want it. ETC ETC ETC. What is the problem? My old Nano seem to be so easy to use. Just plug it in the computer and voila. I tunes says it is pluggged in and updated, but nothing seems to working properly.
    IPOD Nano 4GB Windows XP Pro
    My new IPOD acts like it is not connected. That is why none of my songs are highlighted and I can't make a new playlist. Right now I have my new IPOD hooked on the computer to Itunes but it is not playing through itunes like the old one. I have tried to download the newest version of Itunes but it says I have the latest. The computer(Itunes) says it is connected and insync but for some reason not taking it. Do I need to take this back to the apple store?

    Do the iPod Disk Diagnotic in this excellent post by tt2.
    If the report is good
    Try using the USB 2.0 port at the back of the PC
    Disconnect all other USB devices
    Dont use any other Apps while you are syncing or Restoring.the iPod.
    Disconnect from Internet and stop the Antivirus or other monitoring software.
    Have anice day!

  • HP Photosmart 7520 not connected to computer when trying to scan

    Hi!!
    I have an IMac.  I can print from my computer, and my computer recognizes my printer (HP Photosmart 7520), however, my printer will not connect to my iMac...Help!  ;-)
    When I am trying to scan, the exact warning is:  "No Connection:  No computer is connected.  See printer Help and documentation to troubleshoot the connection."
    When I go to printer Help and doc, it says to install the HP software on my computer.
    I already went through most of the troubleshooting steps I could find (on my computer and online) - they only dealt with my computer not recognizing my printer...not vice versa...
    The little bluetooth light is lit and going strong...
    Thanks in advance!!!
    Katie

    Hi @ktsue,
    Welcome to the HP Forums!
    I understand that you cannot scan with your HP Photosmart 7520 on your Mac. I am happy to help you with this scanning issue!
    For further assistance, I will need some additional information:
    The version of Mac Operating System that you are using. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies. Copy Text or Mixed Documents.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    In the meantime, please see this scanning guide, A 'No Computer Detected' or 'Connection Error' Message Displays for HP Photosmart 7520 e-All-in-One .... (Even though the guide title may not match your issue, I believe the solutions will help).
    Thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for