Curve 8520 - lock/ mute/ pause button has fallen off
The lock button on my phone has just come off, is there any other way I can lock my phone or will I have to repair the button (AGAIN!)?
This is the third time its fallen off due to general wear and tear and its beginning to get a little annoying, it would be great if the lock settings could be changed but I'm beginning to think this is unlikely
Thanks,
Punch
AmyLodge wrote :
I've been looking for weeks on Ebay and such sites to see if they have the buttons but they don't seem to sell them anywhere. Please could you tell me where you got yours repaired at?
Hi AmyLodge
Welcome to the Community
Keyboard comes as one piece and you can't find buttons separately ,so you have to buy the whole keyboard.If you are unable to get it in ebay then try amazon.com, there I think you may get it.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Similar Messages
-
I experienced a weird problem for which I don't know the reason. A few months ago I had this problem which if I have to describe it, this is how it happens:
While I'm surfing, coding or playing a game, X dies (freezes) and the monitor goes black losing connection with the GPU. I saw the GPU message in dmesg and after a few more times it happened, I opened my PC, disassembled everything to clean the dust. Afterwards everything went okay, back to normal. Today, I experienced the problem again while playing a game and logged in through ssh to get some logs. Here's what I got:
# dmesg
[Mon Jan 5 17:57:32 2015] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[Mon Jan 5 17:57:32 2015] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[1538364.433]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[1538364.475] X Protocol Version 11, Revision 0
[1538364.490] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[1538364.505] Current Operating System: Linux archy 3.18.1-1-ARCH #1 SMP PREEMPT Wed Dec 17 15:40:09 CET 2014 x86_64
[1538364.505] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/archy/root rw vga=0x361 resume=/dev/archy/swap initrd=../intel-ucode.img,../initramfs-linux.img
[1538364.537] Build Date: 29 December 2014 01:09:58PM
[1538364.552]
[1538364.567] Current version of pixman: 0.32.6
[1538364.597] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1538364.597] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1538364.657] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 4 14:27:25 2015
[1538364.672] (==) Using config file: "/etc/X11/xorg.conf"
[1538364.687] (==) Using config directory: "/etc/X11/xorg.conf.d"
[1538364.702] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[1538364.702] (==) ServerLayout "Layout0"
[1538364.702] (**) |-->Screen "Screen0" (0)
[1538364.702] (**) | |-->Monitor "Monitor0"
[1538364.702] (**) | |-->Device "Device0"
[1538364.702] (**) |-->Input Device "Keyboard0"
[1538364.702] (**) |-->Input Device "Mouse0"
[1538364.702] (==) Automatically adding devices
[1538364.702] (==) Automatically enabling devices
[1538364.702] (==) Automatically adding GPU devices
[1538364.702] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[1538364.702] Entry deleted from font path.
[1538364.702] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[1538364.702] Entry deleted from font path.
[1538364.702] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[1538364.702] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[1538364.702] Entry deleted from font path.
[1538364.702] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[1538364.702] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[1538364.702] (==) ModulePath set to "/usr/lib/xorg/modules"
[1538364.702] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[1538364.702] (WW) Disabling Keyboard0
[1538364.702] (WW) Disabling Mouse0
[1538364.702] (II) Loader magic: 0x818d80
[1538364.702] (II) Module ABI versions:
[1538364.702] X.Org ANSI C Emulation: 0.4
[1538364.702] X.Org Video Driver: 18.0
[1538364.702] X.Org XInput driver : 21.0
[1538364.702] X.Org Server Extension : 8.0
[1538364.704] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[1538364.704] (II) xfree86: Adding drm device (/dev/dri/card0)
[1538364.704] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[1538364.704] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Invalid argument
[1538364.704] (II) systemd-logind: releasing fd for 226:0
[1538364.705] (--) PCI:*(0:1:0:0) 10de:1245:10b0:0401 rev 161, Mem @ 0xfc000000/33554432, 0xe8000000/134217728, 0xf0000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[1538364.705] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[1538364.705] (II) LoadModule: "glx"
[1538364.706] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[1538364.712] (II) Module glx: vendor="NVIDIA Corporation"
[1538364.713] compiled for 4.0.2, module version = 1.0.0
[1538364.713] Module class: X.Org Server Extension
[1538364.713] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[1538364.713] (II) LoadModule: "nvidia"
[1538364.713] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[1538364.713] (II) Module nvidia: vendor="NVIDIA Corporation"
[1538364.713] compiled for 4.0.2, module version = 1.0.0
[1538364.713] Module class: X.Org Video Driver
[1538364.713] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[1538364.713] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[1538364.713] (++) using VT number 1
[1538364.713] (--) controlling tty is VT number 1, auto-enabling KeepTty
[1538364.713] (II) Loading sub module "fb"
[1538364.713] (II) LoadModule: "fb"
[1538364.713] (II) Loading /usr/lib/xorg/modules/libfb.so
[1538364.713] (II) Module fb: vendor="X.Org Foundation"
[1538364.713] compiled for 1.16.3, module version = 1.0.0
[1538364.713] ABI class: X.Org ANSI C Emulation, version 0.4
[1538364.713] (II) Loading sub module "wfb"
[1538364.713] (II) LoadModule: "wfb"
[1538364.713] (II) Loading /usr/lib/xorg/modules/libwfb.so
[1538364.713] (II) Module wfb: vendor="X.Org Foundation"
[1538364.713] compiled for 1.16.3, module version = 1.0.0
[1538364.713] ABI class: X.Org ANSI C Emulation, version 0.4
[1538364.713] (II) Loading sub module "ramdac"
[1538364.713] (II) LoadModule: "ramdac"
[1538364.713] (II) Module "ramdac" already built-in
[1538364.714] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[1538364.714] (==) NVIDIA(0): RGB weight 888
[1538364.714] (==) NVIDIA(0): Default visual is TrueColor
[1538364.714] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[1538364.714] (**) NVIDIA(0): Option "NoLogo" "True"
[1538364.714] (**) NVIDIA(0): Enabling 2D acceleration
[1538364.951] (II) NVIDIA(0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1538364.951] (II) NVIDIA(0): Vision stereo.
[1538365.009] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF116) at PCI:1:0:0 (GPU-0)
[1538365.009] (--) NVIDIA(0): Memory: 1048576 kBytes
[1538365.009] (--) NVIDIA(0): VideoBIOS: 70.26.23.00.00
[1538365.009] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[1538365.014] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 450 at PCI:1:0:0
[1538365.014] (--) NVIDIA(0): CRT-0
[1538365.014] (--) NVIDIA(0): CRT-1
[1538365.014] (--) NVIDIA(0): DFP-0
[1538365.014] (--) NVIDIA(0): Philips 234CL (DFP-1) (boot, connected)
[1538365.014] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[1538365.014] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[1538365.014] (--) NVIDIA(0): DFP-0: Internal TMDS
[1538365.014] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[1538365.014] (--) NVIDIA(0): Philips 234CL (DFP-1): Internal TMDS
[1538365.014] (--) NVIDIA(GPU-0): Philips 234CL (DFP-1): 225.0 MHz maximum pixel clock
[1538365.014] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[1538365.014] (**) NVIDIA(0): device Philips 234CL (DFP-1) (Using EDID frequencies has
[1538365.014] (**) NVIDIA(0): been enabled on all display devices.)
[1538365.014] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.014] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.014] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.014] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.014] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.014] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.014] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.014] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.014] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (30.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (25.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (27.0 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "720x480".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "720x480".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check
[1538365.015] (WW) NVIDIA(GPU-0): for mode "720x576".
[1538365.015] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.015] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.015] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.015] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.015] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.016] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.016] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.016] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-83.000 kHz) would exclude
[1538365.016] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check
[1538365.016] (WW) NVIDIA(GPU-0): for mode "720x576".
[1538365.016] (WW) NVIDIA(GPU-0): The EDID for Philips 234CL (DFP-1) contradicts itself: mode
[1538365.016] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
[1538365.016] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-76.000 Hz) would exclude
[1538365.016] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[1538365.016] (WW) NVIDIA(GPU-0): check for mode "720x576".
[1538365.016] (==) NVIDIA(0):
[1538365.016] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[1538365.016] (==) NVIDIA(0): will be used as the requested mode.
[1538365.016] (==) NVIDIA(0):
[1538365.016] (II) NVIDIA(0): Validated MetaModes:
[1538365.016] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[1538365.016] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[1538365.039] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[1538365.039] (--) NVIDIA(0): option
[1538365.039] (--) Depth 24 pixmap format is 32 bpp
[1538365.039] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[1538365.039] (II) NVIDIA: access.
[1538365.040] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[1538365.040] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[1538365.041] (II) NVIDIA(0): configuration option may not be set correctly. When the
[1538365.041] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[1538365.041] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[1538365.041] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[1538365.041] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[1538365.041] (II) NVIDIA(0): Config Options in the README.
[1538365.045] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[1538365.117] (==) NVIDIA(0): Disabling shared memory pixmaps
[1538365.117] (==) NVIDIA(0): Backing store enabled
[1538365.117] (==) NVIDIA(0): Silken mouse enabled
[1538365.117] (**) NVIDIA(0): DPMS enabled
[1538365.117] (II) Loading sub module "dri2"
[1538365.117] (II) LoadModule: "dri2"
[1538365.117] (II) Module "dri2" already built-in
[1538365.117] (II) NVIDIA(0): [DRI2] Setup complete
[1538365.117] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[1538365.117] (--) RandR disabled
[1538365.120] (II) Initializing extension GLX
[1538365.145] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[1538365.145] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[1538365.145] (II) LoadModule: "evdev"
[1538365.145] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[1538365.145] (II) Module evdev: vendor="X.Org Foundation"
[1538365.145] compiled for 1.16.2, module version = 2.9.1
[1538365.145] Module class: X.Org XInput Driver
[1538365.145] ABI class: X.Org XInput driver, version 21.0
[1538365.146] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
[1538365.146] (II) Using input driver 'evdev' for 'Power Button'
[1538365.146] (**) Power Button: always reports core events
[1538365.146] (**) evdev: Power Button: Device: "/dev/input/event5"
[1538365.146] (--) evdev: Power Button: Vendor 0 Product 0x1
[1538365.146] (--) evdev: Power Button: Found keys
[1538365.146] (II) evdev: Power Button: Configuring as keyboard
[1538365.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[1538365.146] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[1538365.146] (**) Option "xkb_rules" "evdev"
[1538365.146] (**) Option "xkb_model" "pc104"
[1538365.146] (**) Option "xkb_layout" "us"
[1538365.159] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[1538365.159] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[1538365.160] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[1538365.160] (II) Using input driver 'evdev' for 'Power Button'
[1538365.160] (**) Power Button: always reports core events
[1538365.160] (**) evdev: Power Button: Device: "/dev/input/event4"
[1538365.160] (--) evdev: Power Button: Vendor 0 Product 0x1
[1538365.160] (--) evdev: Power Button: Found keys
[1538365.160] (II) evdev: Power Button: Configuring as keyboard
[1538365.160] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[1538365.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[1538365.160] (**) Option "xkb_rules" "evdev"
[1538365.160] (**) Option "xkb_model" "pc104"
[1538365.160] (**) Option "xkb_layout" "us"
[1538365.160] (II) config/udev: Adding drm device (/dev/dri/card0)
[1538365.160] (II) xfree86: Adding drm device (/dev/dri/card0)
[1538365.161] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 28 paused 0
[1538365.161] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Invalid argument
[1538365.161] (II) systemd-logind: releasing fd for 226:0
[1538365.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[1538365.161] (II) No input driver specified, ignoring this device.
[1538365.161] (II) This device may have been added with another device file.
[1538365.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[1538365.161] (II) No input driver specified, ignoring this device.
[1538365.161] (II) This device may have been added with another device file.
[1538365.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[1538365.161] (II) No input driver specified, ignoring this device.
[1538365.161] (II) This device may have been added with another device file.
[1538365.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[1538365.161] (II) No input driver specified, ignoring this device.
[1538365.162] (II) This device may have been added with another device file.
[1538365.162] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[1538365.162] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[1538365.162] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[1538365.162] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[1538365.162] (**) Logitech USB Receiver: always reports core events
[1538365.162] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[1538365.162] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[1538365.162] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[1538365.162] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[1538365.162] (--) evdev: Logitech USB Receiver: Found relative axes
[1538365.162] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[1538365.162] (II) evdev: Logitech USB Receiver: Configuring as mouse
[1538365.162] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[1538365.162] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[1538365.162] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1538365.162] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C521.0009/input/input22/event0"
[1538365.162] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[1538365.162] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[1538365.162] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[1538365.162] (**) Logitech USB Receiver: (accel) acceleration profile 0
[1538365.162] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[1538365.162] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[1538365.162] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[1538365.162] (II) No input driver specified, ignoring this device.
[1538365.162] (II) This device may have been added with another device file.
[1538365.163] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[1538365.163] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[1538365.163] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[1538365.163] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[1538365.163] (**) Logitech USB Receiver: always reports core events
[1538365.163] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[1538365.163] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[1538365.163] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[1538365.163] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[1538365.163] (--) evdev: Logitech USB Receiver: Found relative axes
[1538365.163] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[1538365.163] (--) evdev: Logitech USB Receiver: Found absolute axes
[1538365.163] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[1538365.163] (--) evdev: Logitech USB Receiver: Found keys
[1538365.163] (II) evdev: Logitech USB Receiver: Configuring as mouse
[1538365.163] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[1538365.163] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[1538365.163] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[1538365.163] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1538365.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C521.000A/input/input23/event1"
[1538365.163] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[1538365.163] (**) Option "xkb_rules" "evdev"
[1538365.163] (**) Option "xkb_model" "pc104"
[1538365.163] (**) Option "xkb_layout" "us"
[1538365.163] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[1538365.163] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[1538365.163] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[1538365.163] (**) Logitech USB Receiver: (accel) acceleration profile 0
[1538365.163] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[1538365.163] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[1538365.164] (II) config/udev: Adding input device Logitech HID compliant keyboard (/dev/input/event2)
[1538365.164] (**) Logitech HID compliant keyboard: Applying InputClass "evdev keyboard catchall"
[1538365.164] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[1538365.164] (II) Using input driver 'evdev' for 'Logitech HID compliant keyboard'
[1538365.164] (**) Logitech HID compliant keyboard: always reports core events
[1538365.164] (**) evdev: Logitech HID compliant keyboard: Device: "/dev/input/event2"
[1538365.164] (--) evdev: Logitech HID compliant keyboard: Vendor 0x46d Product 0xc30e
[1538365.164] (--) evdev: Logitech HID compliant keyboard: Found keys
[1538365.164] (II) evdev: Logitech HID compliant keyboard: Configuring as keyboard
[1538365.164] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C30E.0003/input/input4/event2"
[1538365.164] (II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD, id 10)
[1538365.164] (**) Option "xkb_rules" "evdev"
[1538365.164] (**) Option "xkb_model" "pc104"
[1538365.164] (**) Option "xkb_layout" "us"
[1538365.164] (II) config/udev: Adding input device Logitech HID compliant keyboard (/dev/input/event3)
[1538365.164] (**) Logitech HID compliant keyboard: Applying InputClass "evdev keyboard catchall"
[1538365.165] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[1538365.165] (II) Using input driver 'evdev' for 'Logitech HID compliant keyboard'
[1538365.165] (**) Logitech HID compliant keyboard: always reports core events
[1538365.165] (**) evdev: Logitech HID compliant keyboard: Device: "/dev/input/event3"
[1538365.165] (--) evdev: Logitech HID compliant keyboard: Vendor 0x46d Product 0xc30e
[1538365.165] (--) evdev: Logitech HID compliant keyboard: Found 20 mouse buttons
[1538365.165] (--) evdev: Logitech HID compliant keyboard: Found keys
[1538365.165] (II) evdev: Logitech HID compliant keyboard: Forcing relative x/y axes to exist.
[1538365.165] (II) evdev: Logitech HID compliant keyboard: Configuring as mouse
[1538365.165] (II) evdev: Logitech HID compliant keyboard: Configuring as keyboard
[1538365.165] (**) evdev: Logitech HID compliant keyboard: YAxisMapping: buttons 4 and 5
[1538365.165] (**) evdev: Logitech HID compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1538365.165] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C30E.0004/input/input5/event3"
[1538365.165] (II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD, id 11)
[1538365.165] (**) Option "xkb_rules" "evdev"
[1538365.165] (**) Option "xkb_model" "pc104"
[1538365.165] (**) Option "xkb_layout" "us"
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event8)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event9)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event10)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.165] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[1538365.165] (II) No input driver specified, ignoring this device.
[1538365.165] (II) This device may have been added with another device file.
[1538365.274] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1538365.274] (II) NVIDIA(GPU-0): Vision stereo.
[1538365.308] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1538365.308] (II) NVIDIA(GPU-0): Vision stereo.
[1548947.132] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1548947.132] (II) NVIDIA(GPU-0): Vision stereo.
[1548947.165] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1548947.165] (II) NVIDIA(GPU-0): Vision stereo.
[1550651.850] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550651.850] (II) NVIDIA(GPU-0): Vision stereo.
[1550652.419] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550652.419] (II) NVIDIA(GPU-0): Vision stereo.
[1550741.435] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550741.435] (II) NVIDIA(GPU-0): Vision stereo.
[1550741.477] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550741.477] (II) NVIDIA(GPU-0): Vision stereo.
[1550748.196] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550748.196] (II) NVIDIA(GPU-0): Vision stereo.
[1550748.237] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550748.237] (II) NVIDIA(GPU-0): Vision stereo.
[1550754.197] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550754.197] (II) NVIDIA(GPU-0): Vision stereo.
[1550755.980] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550755.980] (II) NVIDIA(GPU-0): Vision stereo.
[1550756.023] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550756.023] (II) NVIDIA(GPU-0): Vision stereo.
[1550764.914] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550764.914] (II) NVIDIA(GPU-0): Vision stereo.
[1550764.956] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550764.956] (II) NVIDIA(GPU-0): Vision stereo.
[1550771.497] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550771.497] (II) NVIDIA(GPU-0): Vision stereo.
[1550771.538] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1550771.538] (II) NVIDIA(GPU-0): Vision stereo.
[1556138.380] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1556138.380] (II) NVIDIA(GPU-0): Vision stereo.
[1556138.413] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1556138.413] (II) NVIDIA(GPU-0): Vision stereo.
[1559190.903] (II) config/udev: removing device Logitech USB Receiver
[1559190.903] (II) evdev: Logitech USB Receiver: Close
[1559190.903] (II) UnloadModule: "evdev"
[1559190.903] (II) systemd-logind: releasing fd for 13:64
[1559190.952] (II) config/udev: removing device Logitech USB Receiver
[1559190.952] (II) evdev: Logitech USB Receiver: Close
[1559190.952] (II) UnloadModule: "evdev"
[1559190.952] (II) systemd-logind: releasing fd for 13:65
[1569521.530] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[1569521.530] (II) No input driver specified, ignoring this device.
[1569521.530] (II) This device may have been added with another device file.
[1569521.559] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[1569521.559] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[1569521.559] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[1569521.559] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[1569521.559] (**) Logitech USB Receiver: always reports core events
[1569521.559] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[1569521.559] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[1569521.559] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[1569521.559] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[1569521.559] (--) evdev: Logitech USB Receiver: Found relative axes
[1569521.559] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[1569521.559] (II) evdev: Logitech USB Receiver: Configuring as mouse
[1569521.559] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[1569521.559] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[1569521.559] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1569521.559] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C521.000B/input/input24/event0"
[1569521.559] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[1569521.559] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[1569521.559] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[1569521.559] (**) Logitech USB Receiver: (accel) acceleration profile 0
[1569521.559] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[1569521.559] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[1569521.560] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[1569521.560] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[1569521.560] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 37 paused 0
[1569521.560] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[1569521.560] (**) Logitech USB Receiver: always reports core events
[1569521.560] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[1569521.560] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[1569521.560] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[1569521.560] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[1569521.560] (--) evdev: Logitech USB Receiver: Found relative axes
[1569521.560] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[1569521.560] (--) evdev: Logitech USB Receiver: Found absolute axes
[1569521.560] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[1569521.560] (--) evdev: Logitech USB Receiver: Found keys
[1569521.560] (II) evdev: Logitech USB Receiver: Configuring as mouse
[1569521.560] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[1569521.560] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[1569521.560] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[1569521.560] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1569521.560] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C521.000C/input/input25/event1"
[1569521.560] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[1569521.560] (**) Option "xkb_rules" "evdev"
[1569521.560] (**) Option "xkb_model" "pc104"
[1569521.560] (**) Option "xkb_layout" "us"
[1569521.560] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[1569521.560] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[1569521.560] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[1569521.560] (**) Logitech USB Receiver: (accel) acceleration profile 0
[1569521.560] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[1569521.560] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[1569840.686] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569840.686] (II) NVIDIA(GPU-0): Vision stereo.
[1569840.776] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569840.776] (II) NVIDIA(GPU-0): Vision stereo.
[1569841.014] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569841.014] (II) NVIDIA(GPU-0): Vision stereo.
[1569841.347] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569841.347] (II) NVIDIA(GPU-0): Vision stereo.
[1569841.380] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569841.380] (II) NVIDIA(GPU-0): Vision stereo.
[1569844.089] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569844.089] (II) NVIDIA(GPU-0): Vision stereo.
[1569862.704] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569862.704] (II) NVIDIA(GPU-0): Vision stereo.
[1569865.088] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569865.088] (II) NVIDIA(GPU-0): Vision stereo.
[1569865.124] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1569865.124] (II) NVIDIA(GPU-0): Vision stereo.
[1570601.645] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1570601.645] (II) NVIDIA(GPU-0): Vision stereo.
[1570601.678] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1570601.678] (II) NVIDIA(GPU-0): Vision stereo.
[1571210.304] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571210.304] (II) NVIDIA(GPU-0): Vision stereo.
[1571210.337] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571210.337] (II) NVIDIA(GPU-0): Vision stereo.
[1571223.269] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571223.269] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.347] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.347] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.398] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.398] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.557] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.557] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.954] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.954] (II) NVIDIA(GPU-0): Vision stereo.
[1571232.987] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571232.987] (II) NVIDIA(GPU-0): Vision stereo.
[1571235.070] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571235.070] (II) NVIDIA(GPU-0): Vision stereo.
[1571244.821] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571244.821] (II) NVIDIA(GPU-0): Vision stereo.
[1571246.208] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571246.208] (II) NVIDIA(GPU-0): Vision stereo.
[1571246.242] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571246.242] (II) NVIDIA(GPU-0): Vision stereo.
[1571995.707] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571995.707] (II) NVIDIA(GPU-0): Vision stereo.
[1571995.740] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1571995.740] (II) NVIDIA(GPU-0): Vision stereo.
[1572958.193] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1572958.193] (II) NVIDIA(GPU-0): Vision stereo.
[1572958.226] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1572958.226] (II) NVIDIA(GPU-0): Vision stereo.
[1572990.958] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1572990.958] (II) NVIDIA(GPU-0): Vision stereo.
[1574042.403] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574042.403] (II) NVIDIA(GPU-0): Vision stereo.
[1574042.437] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574042.437] (II) NVIDIA(GPU-0): Vision stereo.
[1574461.211] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574461.211] (II) NVIDIA(GPU-0): Vision stereo.
[1574461.244] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574461.244] (II) NVIDIA(GPU-0): Vision stereo.
[1574854.577] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574854.577] (II) NVIDIA(GPU-0): Vision stereo.
[1574854.611] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574854.611] (II) NVIDIA(GPU-0): Vision stereo.
[1574920.467] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574920.467] (II) NVIDIA(GPU-0): Vision stereo.
[1574920.501] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1574920.501] (II) NVIDIA(GPU-0): Vision stereo.
[1575456.776] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1575456.776] (II) NVIDIA(GPU-0): Vision stereo.
[1614848.948] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614848.948] (II) NVIDIA(GPU-0): Vision stereo.
[1614848.995] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614848.995] (II) NVIDIA(GPU-0): Vision stereo.
[1614849.072] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614849.072] (II) NVIDIA(GPU-0): Vision stereo.
[1614849.368] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614849.368] (II) NVIDIA(GPU-0): Vision stereo.
[1614849.402] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614849.402] (II) NVIDIA(GPU-0): Vision stereo.
[1614850.513] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614850.513] (II) NVIDIA(GPU-0): Vision stereo.
[1614860.376] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614860.377] (II) NVIDIA(GPU-0): Vision stereo.
[1614861.767] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614861.767] (II) NVIDIA(GPU-0): Vision stereo.
[1614861.801] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1614861.801] (II) NVIDIA(GPU-0): Vision stereo.
[1615455.018] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1615455.018] (II) NVIDIA(GPU-0): Vision stereo.
[1615455.051] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1615455.051] (II) NVIDIA(GPU-0): Vision stereo.
[1615466.381] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1615466.381] (II) NVIDIA(GPU-0): Vision stereo.
[1635286.921] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635286.921] (II) NVIDIA(GPU-0): Vision stereo.
[1635286.968] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635286.968] (II) NVIDIA(GPU-0): Vision stereo.
[1635287.050] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635287.050] (II) NVIDIA(GPU-0): Vision stereo.
[1635287.341] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635287.341] (II) NVIDIA(GPU-0): Vision stereo.
[1635287.374] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635287.374] (II) NVIDIA(GPU-0): Vision stereo.
[1635288.502] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635288.502] (II) NVIDIA(GPU-0): Vision stereo.
[1635300.490] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635300.490] (II) NVIDIA(GPU-0): Vision stereo.
[1635302.609] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635302.609] (II) NVIDIA(GPU-0): Vision stereo.
[1635302.642] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635302.643] (II) NVIDIA(GPU-0): Vision stereo.
[1635587.035] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635587.035] (II) NVIDIA(GPU-0): Vision stereo.
[1635587.068] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635587.068] (II) NVIDIA(GPU-0): Vision stereo.
[1635789.386] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635789.386] (II) NVIDIA(GPU-0): Vision stereo.
[1635789.419] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1635789.419] (II) NVIDIA(GPU-0): Vision stereo.
[1636036.535] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636036.535] (II) NVIDIA(GPU-0): Vision stereo.
[1636036.568] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636036.568] (II) NVIDIA(GPU-0): Vision stereo.
[1636273.449] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636273.449] (II) NVIDIA(GPU-0): Vision stereo.
[1636273.482] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636273.482] (II) NVIDIA(GPU-0): Vision stereo.
[1636497.080] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636497.080] (II) NVIDIA(GPU-0): Vision stereo.
[1636497.113] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636497.113] (II) NVIDIA(GPU-0): Vision stereo.
[1636750.139] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636750.139] (II) NVIDIA(GPU-0): Vision stereo.
[1636750.172] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1636750.172] (II) NVIDIA(GPU-0): Vision stereo.
[1637086.847] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637086.847] (II) NVIDIA(GPU-0): Vision stereo.
[1637086.881] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637086.881] (II) NVIDIA(GPU-0): Vision stereo.
[1637141.213] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637141.213] (II) NVIDIA(GPU-0): Vision stereo.
[1637141.246] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637141.246] (II) NVIDIA(GPU-0): Vision stereo.
[1637148.282] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637148.282] (II) NVIDIA(GPU-0): Vision stereo.
[1637148.316] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637148.316] (II) NVIDIA(GPU-0): Vision stereo.
[1637297.819] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637297.819] (II) NVIDIA(GPU-0): Vision stereo.
[1637297.852] (II) NVIDIA(GPU-0): Display (Philips 234CL (DFP-1)) does not support NVIDIA 3D
[1637297.852] (II) NVIDIA(GPU-0): Vision stereo.
[1637382.416] (EE)
[1637382.416] (EE) Backtrace:
[1637382.461] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x594276]
[1637382.461] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x1983c9) [0x5983c9]
[1637382.461] (EE) 2: /usr/lib/libc.so.6 (0x7f58390c7000+0x33b20) [0x7f58390fab20]
[1637382.461] (EE) 3: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0xe55e1) [0x7f583236f5e1]
[1637382.461] (EE) 4: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0x5c9502) [0x7f5832853502]
[1637382.461] (EE) 5: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0x5cad0a) [0x7f5832854d0a]
[1637382.461] (EE) 6: /usr/bin/Xorg.bin (0x400000+0x1870c7) [0x5870c7]
[1637382.461] (EE) 7: /usr/bin/Xorg.bin (0x400000+0x187a15) [0x587a15]
[1637382.461] (EE) 8: /usr/bin/Xorg.bin (miWideLine+0x46c) [0x589e0c]
[1637382.461] (EE) 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0x5ce480) [0x7f5832858480]
[1637382.461] (EE) 10: /usr/bin/Xorg.bin (miPolySegment+0x3e) [0x5815ae]
[1637382.461] (EE) 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f583228a000+0x5ce931) [0x7f5832858931]
[1637382.461] (EE) 12: /usr/bin/Xorg.bin (0x400000+0x11cb9d) [0x51cb9d]
[1637382.461] (EE) 13: /usr/bin/Xorg.bin (0x400000+0x33d7a) [0x433d7a]
[1637382.461] (EE) 14: /usr/bin/Xorg.bin (0x400000+0x37807) [0x437807]
[1637382.461] (EE) 15: /usr/bin/Xorg.bin (0x400000+0x3b9a6) [0x43b9a6]
[1637382.461] (EE) 16: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f58390e7040]
[1637382.461] (EE) 17: /usr/bin/Xorg.bin (0x400000+0x25dce) [0x425dce]
[1637382.461] (EE)
[1637382.461] (EE) Segmentation fault at address 0x7f583afcb000
[1637382.461] (EE)
Fatal server error:
[1637382.461] (EE) Caught signal 11 (Segmentation fault). Server aborting
[1637382.461] (EE)
[1637382.461] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[1637382.461] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[1637382.461] (EE)
After a reboot, things are back to normal again, but I never found out the reason for this. I'm open to suggestions what might went wrong.
Current hardware: https://www.smirky.net/info/You're not alone on this it seems, a quick search lead me to an older thread on nVidia forums where several users are complaining about it and links to other threads. Some say that changing minimal powermizer state from 0 to 1 solved it for them (see last post of the thread).
There is also this, and to be honest, it reminds me of random blackscreens I was getting on my 8600m GT and a 260GTX until the screen stayed black not even showing the BIOS screen (PC still booted fine though). In the end I solved it by "baking" my GPUs to re-solder the chip to the mainboard. Both continued to work fine since then. The 8600m GT runs on arch now as you can see from my signature, and no problems with it so far.
May I also add I find the error message sounds hilarious.
edit: found this.
Last edited by Soukyuu (2015-01-07 13:19:45) -
[SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus
Hi All,
After a update of my laptop, it does not fully wakes after going into suspend. It does not react to numlock anymore. I have to push the power button for 10 seconds to shut it down.
/var/log/everything.log, normal operations:
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: sending IPv6 Router Solicitation
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: sendmsg: Cannot assign requested address
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: no IPv6 Routers available
Jul 21 03:42:45 localhost dbus[533]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jul 21 03:42:45 localhost dbus[533]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jul 21 03:42:45 localhost acpid: client connected from 1134[0:1000]
Jul 21 03:42:45 localhost acpid: 1 client rule loaded
Jul 21 03:42:46 localhost NetworkManager[559]: <info> (wlan0): IP6 addrconf timed out or failed.
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jul 21 03:42:50 localhost acpid: client connected from 1134[0:1000]
Jul 21 03:42:50 localhost acpid: 1 client rule loaded
Jul 21 03:42:55 localhost kernel: [ 48.812457] fuse init (API version 7.18)
Jul 21 03:42:59 localhost dbus[533]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jul 21 03:42:59 localhost udisksd[1209]: udisks daemon version 1.94.0 starting
Jul 21 03:42:59 localhost dbus[533]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jul 21 03:42:59 localhost udisksd[1209]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jul 21 04:01:01 localhost /USR/SBIN/CROND[1363]: (root) CMD (run-parts /etc/cron.hourly)
Jul 21 04:01:01 localhost anacron[1369]: Anacron started on 2012-07-21
Jul 21 04:01:01 localhost anacron[1369]: Will run job `cron.daily' in 42 min.
Jul 21 04:01:01 localhost anacron[1369]: Jobs will be executed sequentially
Jul 21 04:21:01 localhost -- MARK --
/var/log/everything.log, after starting suspend:
Jul 21 04:21:13 localhost kernel: [ 2346.821030] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:21:13 localhost kernel: [ 2347.000872] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:25:10 localhost kernel: [ 2349.512404] PM: Syncing filesystems ... done.
Jul 21 04:25:10 localhost kernel: [ 2349.514874] PM: Preparing system for mem sleep
Jul 21 04:25:10 localhost kernel: [ 2349.514891] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jul 21 04:25:10 localhost kernel: [ 2349.526541] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jul 21 04:25:10 localhost kernel: [ 2349.539896] PM: Entering mem sleep
Jul 21 04:25:10 localhost kernel: [ 2349.539930] Suspending console(s) (use no_console_suspend to debug)
Jul 21 04:25:10 localhost kernel: [ 2349.573787] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jul 21 04:25:10 localhost kernel: [ 2349.611052] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2349.613512] sd 0:0:0:0: [sda] Stopping disk
Jul 21 04:25:10 localhost kernel: [ 2350.236650] PM: suspend of devices complete after 696.314 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.236925] PM: late suspend of devices complete after 0.270 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.237272] r8169 0000:08:00.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.266603] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.303271] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.326605] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.343218] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.379942] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.403292] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.426606] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.426678] PM: noirq suspend of devices complete after 189.749 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.427140] ACPI: Preparing to enter system sleep state S3
Jul 21 04:25:10 localhost kernel: [ 2350.519991] PM: Saving platform NVS memory
Jul 21 04:25:10 localhost kernel: [ 2350.520810] Disabling non-boot CPUs ...
Jul 21 04:25:10 localhost kernel: [ 2350.623205] CPU 1 is now offline
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Extended CMOS year: 2000
Jul 21 04:25:10 localhost kernel: [ 2350.623688] ACPI: Low-level resume complete
Jul 21 04:25:10 localhost kernel: [ 2350.623688] PM: Restoring platform NVS memory
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Extended CMOS year: 2000
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Enabling non-boot CPUs ...
Jul 21 04:25:10 localhost kernel: [ 2350.630554] Booting Node 0 Processor 1 APIC 0x1
Jul 21 04:25:10 localhost kernel: [ 2350.641916] NMI watchdog: enabled, takes one hw-pmu counter.
Jul 21 04:25:10 localhost kernel: [ 2350.645407] CPU1 is up
Jul 21 04:25:10 localhost kernel: [ 2350.647122] ACPI: Waking up from system sleep state S3
Jul 21 04:25:10 localhost kernel: [ 2350.653227] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.659889] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.666555] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.683204] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.689888] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.696556] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.713204] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.715075] PM: noirq resume of devices complete after 67.761 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.715286] PM: early resume of devices complete after 0.105 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.715344] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715373] usb usb1: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715391] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715421] usb usb2: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715437] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715465] usb usb3: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715480] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715521] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715540] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
Jul 21 04:25:10 localhost kernel: [ 2350.715550] usb usb4: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715571] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715601] usb usb5: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715611] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715623] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715639] usb usb6: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715647] pci 0000:00:1e.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715663] ata_piix 0000:00:1f.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715667] ata_piix 0000:00:1f.5: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715690] r8169 0000:08:00.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.723377] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2350.723395] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2350.816609] r8169 0000:08:00.0: eth0: link down
Jul 21 04:25:10 localhost kernel: [ 2351.111777] ata4: SATA link down (SStatus 0 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.128460] ata3: SATA link down (SStatus 0 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.199920] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2351.263475] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.276859] firewire_core 0000:1a:00.0: rediscovered device fw0
Jul 21 04:25:10 localhost kernel: [ 2351.283960] ata2.00: configured for UDMA/100
Jul 21 04:25:10 localhost kernel: [ 2351.739942] usb 2-2: reset low-speed USB device number 3 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.129932] usb 8-2: reset high-speed USB device number 2 using ehci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.359839] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.784239] usb 6-1.1: reset full-speed USB device number 3 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.883229] btusb 6-1.1:1.0: no reset_resume for driver btusb?
Jul 21 04:25:10 localhost kernel: [ 2352.883233] btusb 6-1.1:1.1: no reset_resume for driver btusb?
Jul 21 04:25:10 localhost kernel: [ 2352.941243] usb 6-1.2: reset full-speed USB device number 4 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.969919] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2353.101249] usb 6-1.3: reset full-speed USB device number 5 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2353.181194] ata1.00: configured for UDMA/133
Jul 21 04:25:10 localhost kernel: [ 2353.181463] sd 0:0:0:0: [sda] Starting disk
Jul 21 04:25:10 localhost kernel: [ 2353.436737] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Jul 21 04:25:10 localhost kernel: [ 2358.057138] PM: resume of devices complete after 7341.844 msecs
Jul 21 04:25:10 localhost kernel: [ 2358.057602] PM: Finishing wakeup.
Jul 21 04:25:10 localhost kernel: [ 2358.057604] Restarting tasks ... done.
Jul 21 04:25:10 localhost kernel: [ 2358.064234] video LNXVIDEO:00: Restoring backlight state
Jul 21 04:25:11 localhost kernel: [ 2358.233575] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.272368] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.309721] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.349601] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:13 localhost kernel: [ 2360.644416] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:25:13 localhost kernel: [ 2360.648163] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:25:13 localhost acpid: client 1134[0:1000] has disconnected
Jul 21 04:25:13 localhost acpid: client 1134[0:1000] has disconnected
Jul 21 04:25:13 localhost acpid: client connected from 1134[0:1000]
Jul 21 04:25:13 localhost acpid: 1 client rule loaded
Jul 21 04:25:26 localhost kernel: [ 2373.415894] NVRM: Xid (0000:01:00): 8, Channel 0000007e
Jul 21 04:25:26 localhost kernel: [ 2373.700350] hrtimer: interrupt took 91847280 ns
Jul 21 04:25:26 localhost kernel: [ 2373.700352] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
Jul 21 04:28:36 localhost kernel: [ 2563.568752] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:28:36 localhost kernel: [ 2563.573610] EXT4-fs (sda8): re-mounted. Opts: commit=0
What does this message mean?
Jul 21 04:25:26 localhost kernel: [ 2373.700352] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
What can i do to solve this?
Best regards,
Cedric
Last edited by cdwijs (2012-08-09 18:33:34)I did a quick google search. This page suggested that I set my videocard in persistend mode:
http://scientificlinuxforum.org/index.p … topic=1469
So i did the following:
]# /usr/bin/nvidia-smi -pm 1
Enabled persistence mode for GPU 0000:01:00.0.
All done.
# /usr/bin/nvidia-smi -q
==============NVSMI LOG==============
Timestamp : Sat Jul 21 04:58:55 2012
Driver Version : 302.17
Attached GPUs : 1
GPU 0000:01:00.0
Product Name : GeForce 9600M GS
Display Mode : N/A
Persistence Mode : Enabled
Driver Model
Current : N/A
Pending : N/A
Serial Number : N/A
GPU UUID : N/A
VBIOS Version : 62.94.8D.00.0B
Inforom Version
OEM Object : N/A
ECC Object : N/A
Power Management Object : N/A
PCI
Bus : 0x01
Device : 0x00
Domain : 0x0000
Device Id : 0x064810DE
Bus Id : 0000:01:00.0
Sub System Id : 0x02C01028
GPU Link Info
PCIe Generation
Max : N/A
Current : N/A
Link Width
Max : N/A
Current : N/A
Fan Speed : N/A
Performance State : N/A
Memory Usage
Total : 511 MB
Used : 30 MB
Free : 480 MB
Compute Mode : Default
Utilization
Gpu : N/A
Memory : N/A
Ecc Mode
Current : N/A
Pending : N/A
ECC Errors
Volatile
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Aggregate
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Total : N/A
Temperature
Gpu : 61 C
Power Readings
Power Management : N/A
Power Draw : N/A
Power Limit : N/A
Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Max Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Compute Processes : Not Supported
This did not solve the issue. The laptop goes into suspend (the power LED starts blinking), but when the power button is then briefly pressed, the machine does power-up, but after hearing 2 clicks from the speaker, i get a black screen, a full-running CPU fan, and no reaction to numlock.
/var/log/everything.log:
Jul 21 04:30:13 localhost NetworkManager[565]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jul 21 04:50:40 localhost -- MARK --
Jul 21 04:54:46 localhost kernel: [ 1516.765698] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:54:46 localhost kernel: [ 1516.942964] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:55:02 localhost kernel: [ 1519.654895] PM: Syncing filesystems ... done.
Jul 21 04:55:02 localhost kernel: [ 1519.657049] PM: Preparing system for mem sleep
Jul 21 04:55:02 localhost kernel: [ 1519.657066] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jul 21 04:55:02 localhost kernel: [ 1519.669943] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jul 21 04:55:02 localhost kernel: [ 1519.683296] PM: Entering mem sleep
Jul 21 04:55:02 localhost kernel: [ 1519.683337] Suspending console(s) (use no_console_suspend to debug)
Jul 21 04:55:02 localhost kernel: [ 1519.717139] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jul 21 04:55:02 localhost kernel: [ 1519.749832] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1519.786781] sd 0:0:0:0: [sda] Stopping disk
Jul 21 04:55:02 localhost kernel: [ 1520.410064] PM: suspend of devices complete after 726.343 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.410337] PM: late suspend of devices complete after 0.266 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.410678] r8169 0000:08:00.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.440024] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.476689] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.500023] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.516685] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.553353] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.576688] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.603354] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.603426] PM: noirq suspend of devices complete after 193.085 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.603888] ACPI: Preparing to enter system sleep state S3
Jul 21 04:55:02 localhost kernel: [ 1520.693403] PM: Saving platform NVS memory
Jul 21 04:55:02 localhost kernel: [ 1520.694218] Disabling non-boot CPUs ...
Jul 21 04:55:02 localhost kernel: [ 1520.796623] CPU 1 is now offline
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1520.797088] ACPI: Low-level resume complete
Jul 21 04:55:02 localhost kernel: [ 1520.797088] PM: Restoring platform NVS memory
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Enabling non-boot CPUs ...
Jul 21 04:55:02 localhost kernel: [ 1520.803951] Booting Node 0 Processor 1 APIC 0x1
Jul 21 04:55:02 localhost kernel: [ 1520.815303] NMI watchdog: enabled, takes one hw-pmu counter.
Jul 21 04:55:02 localhost kernel: [ 1520.816608] CPU1 is up
Jul 21 04:55:02 localhost kernel: [ 1520.818293] ACPI: Waking up from system sleep state S3
Jul 21 04:55:02 localhost kernel: [ 1520.823322] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.829975] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.836638] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.853290] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.859971] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.866638] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.883290] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.885162] PM: noirq resume of devices complete after 66.681 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.885372] PM: early resume of devices complete after 0.105 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.885432] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885432] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885465] usb usb1: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885466] usb usb2: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885487] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885490] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885518] usb usb3: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885549] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885582] usb usb4: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885582] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
Jul 21 04:55:02 localhost kernel: [ 1520.885600] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885629] usb usb5: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885648] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885653] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885680] pci 0000:00:1e.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885679] usb usb6: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885698] ata_piix 0000:00:1f.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885713] ata_piix 0000:00:1f.5: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885736] r8169 0000:08:00.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.890553] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1520.891048] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1520.960285] r8169 0000:08:00.0: eth0: link down
Jul 21 04:55:02 localhost kernel: [ 1521.281391] ata3: SATA link down (SStatus 0 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.297666] ata4: SATA link down (SStatus 0 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.332377] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1521.376657] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1521.406940] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.427670] ata2.00: configured for UDMA/100
Jul 21 04:55:02 localhost acpid: client 1147[0:1000] has disconnected
Jul 21 04:55:02 localhost acpid: client 1147[0:1000] has disconnected
Jul 21 04:55:02 localhost kernel: [ 1521.453328] firewire_core 0000:1a:00.0: rediscovered device fw0
Jul 21 04:55:02 localhost kernel: [ 1521.915219] usb 2-2: reset low-speed USB device number 3 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.303337] usb 8-2: reset high-speed USB device number 2 using ehci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.533339] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.955078] usb 6-1.1: reset full-speed USB device number 3 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.057065] btusb 6-1.1:1.0: no reset_resume for driver btusb?
Jul 21 04:55:02 localhost kernel: [ 1523.057070] btusb 6-1.1:1.1: no reset_resume for driver btusb?
Jul 21 04:55:02 localhost kernel: [ 1523.113342] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1523.115078] usb 6-1.2: reset full-speed USB device number 4 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.278082] usb 6-1.3: reset full-speed USB device number 5 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.321369] ata1.00: configured for UDMA/133
Jul 21 04:55:02 localhost kernel: [ 1523.321637] sd 0:0:0:0: [sda] Starting disk
Jul 21 04:55:02 localhost kernel: [ 1523.613501] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Jul 21 04:55:02 localhost kernel: [ 1528.234017] PM: resume of devices complete after 7348.637 msecs
Jul 21 04:55:02 localhost kernel: [ 1528.234472] PM: Finishing wakeup.
Jul 21 04:55:02 localhost kernel: [ 1528.234474] Restarting tasks ... done.
Jul 21 04:55:02 localhost kernel: [ 1528.239320] video LNXVIDEO:00: Restoring backlight state
Jul 21 04:55:02 localhost acpid: client connected from 1147[0:1000]
Jul 21 04:55:02 localhost acpid: 1 client rule loaded
Jul 21 04:55:02 localhost kernel: [ 1528.396372] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.433245] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.469720] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.506634] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:03 localhost kernel: [ 1530.007718] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:55:04 localhost kernel: [ 1530.271879] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:55:55 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jul 21 04:55:55 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Interestingly, the message that the GPU has fallen off the bus is no longer present. Something else is going on as well :-)
Best regards,
Cedric -
F12 key has fallen off. How do I reattach it?
My f12 key has fallen off. How do I reattach it? It seems like the hooks on the keyboard itself are slightly bent, but I'm not sure if thats the design. Is this normal, or something I need to go get replaced?
Here's a picture that shows the hooks if you zoom in.
https://www.flickr.com/photos/88922036@N06/
Thanks!Go to the iFixit.com web site. See if they have instructions for your model MBP.
Ciao. -
Arrow key has fallen off Pavillion 1200dx
An arrow key has fallen off my Pavillion 1299dx keyboard. What is the best method to secure the key back onto the keyboard?
This question was solved.
View Solution.Hi:
This website has videos on how to reattach keys.
If you put the full model number in the site, you will find the video for your key type.
1200dx isn't enough info.
http://www.laptopkey.com/blog/ -
My blackberry curve 8520 lock!
hi everyone! i have a blackberry burce 8520 in black and i really want to know how i can change my mute/play key on the top of my phone, to lock and unlock my phone? could someone help mee thanks!
Hi denisssilva94,
Welcome to the Support Community!
I would suggest first testing your BlackBerry® Curve™ 8520 smartphone with another battery to rule out any issue with the battery itself.
If you have the same issues when using another battery, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.
For further instructions, please see the following KB articles.
For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
Please test to make sure the issue has been resolved before restoring any data from your backup file.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
The bottom of ipod , where connector for charging is , has simply fallen off. Can you get this replaced? If so can it be done under warranty.
The system was bought in USA 10 months ago however I live in UK.
I still have the receipt of purchase.
ThanksThis has happened to me a couple of times. Can you just snap it back in? That's all I had to do for mine.
-
Blackberry curve 8520 locking my screen
When I used to lock my screen the screen used to turn off after I pressed lock and came back one once I started to type in my password. How do I turn this feature back on?
It's okay I took out my battery and the feature is now working again on my phone xxx
-
How to reattach one of the rubber feet which has fallen off?
Hi,
One of the little black rounded rubbery feet on the base of my MacBook Pro has become unstuck. By what means can I safely reattach does anyone know - with regular glue or some sort of special electronic-friendly glue or..?
Thanks!!Hi,
Any "regular" glue should do, unless you need some extra-strength resistance to friction (some people like to drag their computer around their desk rather than pick it up). Make sure you put the small rubber gizmo in the right position (with the previously glued end up), or the glue on the apparent end will stick to any surface you put your machine on, and the foot will come unglued once more...
(Maybe now my friends will believe me when I say I'm a high-tech guy!) -
Ultranav button has come off, how to fix?
The left Ultranav button of my T40 came off. Nothing appears broken. How does one stick the button back on?
Here's a picture of the actual parts:
DSCN0128.jpgBump... Can anyone with experience offer some assistance, please?
-
Sleep/lock button has broke, will Apple fix this?
So my lock/power/sleep button has decided to break. I cannot get it to work no matter how hard I press on the button.
It has NOT been dropped, exposed to water or humdity of any kind.
My question is, will Apple fix this for me or replace my iPhone 4? I have scheduled an appointment at the closest store for Monday as it was the earliest I could be seen and I am still under warranty.
Many thanks for any potential help.Thank you for your help, it is definitely under warranty as I used the online checker and I only bought it January.
I will ensure that I back it up before I go, would it be wiser to delete my content off the phone as well? -
My "New Tab" button has disappeared off the toolbar. I have searched the toolbar menus and "Customise Toolbar" but it's just not there. Back, Forward, Stop and Reload buttons are all there.
You can find the New Tab button showing as a '+' on the Tab bar.<br />
You can open the Customize window and drag the New Tab button from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
If you want the New Tab button at the far right end of the Tab bar then place a flexible to the left of it.<br />
*If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"<br />
*If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar<br />
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Corrupt_localstore.rdf -
Button panel fell off- Warranty?
Hi, Just wondered if anyone else has a Torch and the panel of buttons on the front (with the answer key etc on) has fallen off?
I took it back to my provider but they say they can't fix it under warranty as they said it's 'physical damage' It just fell off!! The sticky pad holding it onto the phone just isn't that sticky.Under the blackberry warranty terms it states "...that the BlackBerry Hardware will be free from defects in workmanship and materials" sureley this is covered as it's a defect in the materials?
If anyone else could respond that would be great. Or if Blackberry could confirm it's under warranty that would be even better, I've only had it 3 months and I'm in a 18 month contract.
ThanksYou can but a new set of keys for 8 bucks if they wont warranty it.
http://cgi.ebay.com/QWERTY-ARABIC-KEYBOARD-KEYPAD-FOR-BLACKBERRY-TORCH-9800_W0QQitemZ280626006967QQc...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
NONE of the buttons on my curve 8520 are working. HELP!
So, today I pulled out my phone and the screen was black. I took out the battery, put it back in and the LED just kept blinking. I pulled the battery out again and left it for a bit. It turned on, when it turned on my phone was locked. I couldn't press any buttons. No matter what it was, the four buttons on the top row, the trackpad or any of the keys weren't working. My phone still turns on normally but none of the buttons work.
I have a Curve 8520.
Thanks.Im having the same problem,Not sure what to do..Good luck
Twisted Gypsy -
Blackberry Curve 8520 Won't Lock! Help!
I recently purchased a new Blackberry Curve 8520, and it was working great, until a couple of days ago, when it starting not working.
Whenever I'd press the a* button to lock it like you're supposed to, it wouldn't lock.
I tried shutting it off and then turning it back on again, but it still won't lock.
It's really annoying, because I can't put it in my pocket without pocket-dialing someone from my contacts.
Any ideas on how to get it to lock again?
Solved!
Go to Solution.dwapurity wrote:
Hello! I've tried your suggestion and my 'a'/'lock button' is still not working! Any more suggestion?
Hi
Whats the version of the operating system please. Go to Options > About and it looks like OS 5.0.0.681 (which happens to be mine).
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>
Maybe you are looking for
-
MSI 790FX GD70 BIOS 1.7 AND 1.10 OCZ AMD BLACK 1600 MHZ 2X2GB PC POWER AND COOLING 750W AMD 965 125W C3 ZALMAN 9700 WD 640GB BLACK SAPPHIRE 5870 2GB VAPOR X Okay,I need help,newbuild ,hooked everything up,hit power button,fans on case and card spin,a
-
Safari closes everytime I open it
I have a powerbook g4 aluminum running Mac OSX 10.4.11 everytime I try and open safari it closes and asks if i want to reopen if I try it still closes. This problem happened with my safari 3 so I updated to 4 and it does the same thing. Can anyone pl
-
Images cut from Microsoft Word document being picked up in the file size by Acrobat distiller
Hello All; I have a large MS Word document (book manuscript) with almost 400 images (all grayscale) and found that the tiff images needed to be replaced with jpegs to reduce the file size. I created the jpegs, cut the tiff images from the document, a
-
Why not include the email address in the $data array that gets inserted into the database? Is that covered later in the book?
-
Authorization check creating Work Orders (IW31)
Hello everyone, We need to make an authorization check when creating a Work Order in transaction IW31. That check is based on the field "Main work center for maintenance tasks" No check apart from the plant associated to the work center is done, but