Curve 8520 set-up newbie help please - have wifi but no browser, no internet, no email

I have just acquired this near-new pre-owned Curve.  It appeared to have been correctly data-cleared by the previous owner.  I've run the set-up wizard and everything worked fine.  It's connected to my wifi with a strong signal. But
1. the browser says "Unable to connect to the Internet - contact your service provider", and
2. the email set-up screen does not offer "I want to create or add an email address" as in the User Guide - only "I want to use a  work email account" which I don't have and don't want!  The screen message says if the "add email address"' option is not shown, contact your wireless provider.
 I don't understand!  If my TalkTalk broadband (wifi) is connecting my laptop to the internet with no problem, what more do I have to do to get the Blackberry (connected to the same wifi) onto the internet too? 
3. And how do I connect to the internet via the phone (Vodafone PAYG) when I am not in wifi range?  
Finally:
4.  Why does my phone say "unknown number" when it's calling out? The User Guide says it should show my own number.  Surely it knows this number from the Sim card?
Completely out of my depth here, as you can see....
Big thanks in advance for any help
Michael
Solved!
Go to Solution.

Hiya, as per the messages your phone is giving you.... You need to contact Vodafone. 
In order to use the majority of data features on your phone such as email or BBM, you need a blackberry data plan rather than the generic one from your carrier. 
So give Vodafone a call - I believe the BlackBerry Bolt On on PAYG is £5 a month with some inclusive data. 

Similar Messages

  • I have wifi but not accesss to internet

    I can not use my iPod touch 4g using wifi from my iMac. Everything its setup ok.  Ask me to verify that I have entered the correct account info in mail settings...... or Cannot open page Safari cannot open the page because it;s not connected to the internet. I'm using a router airport extreme like a router

    Head to Settings -> Wifi and click the > next to the network you are currently connected to.  What does it list for an IP address?  If it is in the 169.x.x.x range, it means your router could not properly issue your iPod Touch a valid IP address via the DHCP protocol.  Usually, a simple reboot of your router (or Extreme in your case) should resolve the issue.  Simply unplug it for about 30 seconds or so and then turn it back on.  It wouldn't hurt to reboot your touch as well.
    See this article for more troubleshooting suggestions.
    http://support.apple.com/kb/ts1398
    B-rock

  • I don't know if this is a Firefox problem so I ask, When printing how come it always prints so small I nearly need a magnafing glass? Is this caused by something else I may have set incorrectly? help please, from a very satisfied Firefox user

    I don't know if this is a Firefox problem so I ask, When printing how come it always prints so small I nearly need a magnifying glass? Is this caused by something else I may have set incorrectly? help please, from a very satisfied Firefox user

    This only happens when I'm in my browser. Ex. when I'm on a site and I decide I like what I see and want to print it text that is, my printer always prints tiny. When I'm in Microsoft Word for ex. I print it and it looks like what I expect. So I don't know if somehow my printer got set to print tiny when on the web. If you can help me I would be most appreciative. Thanks again for your response.

  • I have misplaced my ipod 4th gen. It has no battery or find my ipod isn't on I'm not 100% it doesn't have wifi but I don't think it does. If anyone can help I will be very great full. Thank you.

    I have misplaced my ipod 4th gen. It has no battery or find my ipod isn't on I'm not 100% it doesn't have wifi but I don't think it does. If anyone can help I will be very great full. Thank you.

    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
    Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
    As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
    Is there a way to resolve this issue?

  • HT1937 i have wifi but when i go to the app store on my ipad it say cant connect all the time

    i need help try to connect my ipad to the app store and i also have wifi but for some reason it just want let me

    Any errors occurring on the device?
    When this occurs, are you able to use other apps that require Internet access?

  • My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    Basic troubleshooting techniques for any problem
    Restart the computer = joy?
    Reset the router = joy?
    Restart the computer in Safe Mode = joy?
    ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
    ÇÇÇ

  • My Mum( a pensioner) is wanting to purchase both an iPhone and iPad.  What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible.  Currently does not have WiFi but uses dongle

    My Mum( a pensioner) is wanting to purchase both an iPhone and iPad.  What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible.  Currently does not have WiFi but uses dongle

    My Mum( a pensioner) is wanting to purchase both an iPhone and iPad.  What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible.  Currently does not have WiFi but uses dongle

  • I have full signal and have wifi but I'm can't send messages or receive them. I can't make phone calls either.

    HI
    I have full signal and have wifi but I'm can't send messages or receive them. I can't make phone calls either. it picks and chooses when I can receive them and make calls. It only works everytime I turn my phone off.

    Try turning on Airplane mode for a little bit (20-30 seconds) and turn it back off. see if that doesn't allow you to re-connect.
    In my current project my office receives no signal at all. I have to do this almost every time I leave the office in order to get a signal.

  • My text messages go to everyone except to my daughters. she has an iphone but with bell and mine is with rogers.  she receives them when she is at home or say at chapters/tim hortons where they have wifi, but if she is walking somewhere or at somewhere wi

    my text messages go to everyone except to my daughters. she has an iphone but with bell and mine is with rogers.  she receives them when she is at home or say at chapters/tim hortons where they have wifi, but if she is walking somewhere or at somewhere without wifi, it isn't working? i don't understand.  she has a text plan.  her phone is an iphone 4s  can anybody assist me if you know what the problem may be? thanks so much.

    Have her go to Settings>Cellular and make sure Cellular Data is turned to On.  If she's having trouble with regular sms messages, check her carrier to be sure her messaging plan is properly provisioned.

  • Getting this messg on Factime "could not sign in, check your network connection", but I have Wifi activated and working with internet??

    Getting this messg on Factime "could not sign in, check your network connection", but I have Wifi activated and working with internet?? what can I do?

    Usually it's because you are not making internet connection via wifi. Open Safari and see if it connects.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Just updated IPad 2 to IOS8 and now have no 3G service  have WIFI but not 3G  Says No Service at top

    Just updated IPad 2 to IOS8 and now have no 3G service  have WIFI but not 3G  Says No Service at top

    I am really sorry I upgraded so quickly to ios8.
    Not only do I not have my ATT but my pics "events from mac" are in some unknow order.  I have 220 folders that are not alpabetized.  I cannot find any pictures.
    On the Macbook Air the events are perfect, all in alphabetic order.  When they transferred they are mixed.  Faces are mixed now.
    THis new operating system is horrible.  How do I go back to 7.
    And the ipad 2 is so slow now.  There are no positives!

  • My bb curve 8520 refuses to connect to my home wifi please somebody help me

    i have had my bb curve 8520 for about 6 months now a not being the most hi-tech person in the world i have just downloaded bb app world altough i have managed to sucessfuly download a couple of free new apps to my bb    
    ( battery booster and the sky sports live football scores app ) then i tried to down load TuneIn radio app as i like to listen to music when going to sleep and was fed up with using my top-up to keep paying for single tracks off the vodafone site at first the radio app just would not download that was at 4am this morning so this afternoon i thought i would give it another try and after a quite along wait it finally downloaded brillient thinks me but then when i went to use it i tried to connect to the USE WIFI ONLY option as i had just run out of credit  but the wifi just will not let me connect to this app or website whatever it is i went to the connections on the home screen and selected wifi and connected it it said it was connected sucessfully so tried the app again but to no avail i have looked through a lot of posts on this forum and tried absolutly every thing that others have suggested some even say about not having a network service plan ( which i presume is your web monthly web allowance megabytes and that i hope anyway) but i know for a fact that i have one as i pay 5 pounds a month for 500mb and when i rang my account balance number this morning to use the vodafone I.O.U service it told me that my web allowance had been used so is there any one who can help me if this is the case about some websites and apps not being available unless you have or your service is paid upto date the why has it the wifi only option on the app and after it refuses me access to this app a screen pops up saying reload the screen but right at the top of the screen next to the app name there is a red warning triangle and next to it says" IO error :Tunnel...." 
       please is there any body out there that can help me with this its driving me mad thank you to anyone in advance if you can help with this 

    please please someone help me out T_T
    «..:itufa¤Pitufo::..»

  • NONE of the buttons on my curve 8520 are working. HELP!

    So, today I pulled out my phone and the screen was black. I took out the battery, put it back in and the LED just kept blinking. I pulled the battery out again and left it for a bit. It turned on, when it turned on my phone was locked. I couldn't press any buttons. No matter what it was, the four buttons on the top row, the trackpad or any of the keys weren't working. My phone still turns on normally but none of the buttons work. 
    I have a Curve 8520.
    Thanks.

    Im having the same problem,Not sure what to do..Good luck
    Twisted Gypsy

  • On my iPod touch it says on the settings I have wifi but when I look for the 3 bars there is no wifi please help

    On my iPod touch it says on the settings i am connected to my home wifi but when I look for the 3. Bars beside the time they are not there this therefore stops me from using internet please help

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears. already suggested
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Why I can't create a folder in my passport ultra? I want to back up my files

    My MAC is getting slower so I bought a 1 TG WD My Passport Ultra to free up some space. But once installed, I can't create new folder in the external HD. Please help.

  • Adding new field in MCSI

    Hi All, I want to add new <b>Sales Office</b> in <b>T.Code : MCSI</b>...... Can anybody help me how its possible???? Is It possible by using User exit or BADI....... Regards, <b>Anil Kumar</b>

  • Cannot restore config backup on WRVS4400N

    my router crashed/reset to factory defaults last night. i tried to restore an old backup but it gave me following error: Restore failure (Unmatched pid) so for several hours i reconfigured it manually and all seemed good. just for the fun of it, i tr

  • DATAELEMENT FOR A FIELD

    HEllo Friends, How can we find the DATAELEMENT used for a FIELD with the help of ABAP CODE? Is there any table reflecting this? THanks and Regards Ashish NAik

  • ActiveX not loading

    <p><span style=" font-family: Verdana; font-size: 9.0pt;">ActiveXno longer loading due to security update 896688(MS05-052)</span></p><p> </p><p><span style=" font-family: Verdana; font-size: 9.0pt;">BrioPerformance Suite 6.6 is the product in questio